Lr5, Please help me solve this mystery.

I've downloaded Lr5. In my applications I have Lr4 and Lr5. When I open Lr4, I only see some photos with (?) photos not found. When I open Lr5, it's an empty catalog. All my photos are on the external HD in folders. I tried to copy my photos from the Ext HD to my new Lr5 but they were all getting lumped into one folder and not into subfolders.
Please help me bring my photos into Lr5. Should I have both Lr4 and Lr5 in my applications? I'm on a Mac.

Do not import your photos into LR5 as you will lose the work you did on your photos in LR4. The correct way is for LR5 to open and update the LR4 catalogue.
First, in LR4, attach your external hard drive(s) and ensure no files are missing. Any question marks on folders? Any question marks on photos? If so, resolve them (click the question mark and follow the instructions). Use the Library command Library > Find Missing Photos to confirm none are missing.
Now with your LR4 catalogue straightened out, open LR5 and run the menu File > Open Catalog. Point to your LR4 catalogue. LR5 will open and convert it to LR5 format, saving a backup copy.

Similar Messages

Please Help Me Solve This Mystery

I have a desktop PC hard wired to my BT router and a laptop that connects wirelessly. Yesterday I noticed that the laptop was ok but when I switched my PC on I lost my broadband connection. After speaking to a BT engineer and swapping and relocating routers all around my house something really strange happened. I had no peripherals connected to my PC and disconnected my BT router. Again I had full broadband on the laptop until I switched on my PC which was totally 'stand alone' and again my broadband disappeared. BT have said I need to get in touch with my PC seller as something is affecting my connection when it is simply switched on. It has been operating fine for over a year and has Windows Vista 64 bit loaded. Can anyone think of any settings / software or other on a PC (with no wireless capabilities) that can cause BT broadband to go down simply by switching it on ???
Please help...it's driving me mad !
Thanks.

Thanks for the replies..the problem now seems to have sorted itself and I have had no problems for the past 12 hours. Tell you the full story...I was on option One Broadband with a max download of 10 Gb. Four months ago I had an extra £17 on my bill. I had cancelled my Sky subscription and had been watching football via streaming on my PC (totally unaware that this constituted downloading...Doh !). I upgraded to option 2 which gave me a max of 20Gb. A few days after I couldn't watch anything...my IP profile had been reduced to 137Kbps. BT advised me that it might be my netgear router and sent me one of theirs. Following a week of ongoing phone calls (and an engineers visit) they concluded there was nothing wrong with my equipment or my distance from the exchange (I can throw a stone onto it's roof from where I live...and I must admit I have been tempted to do so). Suddenly my profile rose to 3000 but the BT consultant said he would get me up to 6000. Over two months they have been contacting me every three days asking me what my speed was. It has wavered between an all time low of 2500 to a staggerring 6500 which lasted just one day. They then sent another engineer who examined my line and equipment and said there was no problem. I asked him would an accelerator help and he said "I don't know anything about computers mate..I just test the telephone lines". Last weekend they informed me that my exchange would be upgrading their equipment and I would see a massive change very soon. I did. Switched my computer on and lost all signals. The sad thing with BT is that my indian contact told me NOT to phone them because if someone else answered the call they would then take over my case !. I duly complied regarding my speed problem but when I lost my broadband I had to call and subsequently the guy I have been talking to for two months has now been replaced by a lady who is 'consulting my history notes' which must now be up to Volume 3. After now resiting and replacing routers and trying various power points around the house they concluded my PC was the problem and have marked me as 'case resolved'. I have decided the best plan of action is as follows :
1 Never contact BT Broadband unless absolutely necessary i.e. matter of life or death
2 Open a bottle of very expensive Merlot
3 Drink it
I am about to embark on stage 2. Thank you all for your suggestions, very much appreciated. Now where's that corkscrew ?

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

My icloud activation lock is ON my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.

My icloud activation lock is on my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.

Yes the phone belongs to me. It was purchased from United Kingdom Vodafone to West Africa, i had to factory unlock to use any sim in it. so it belongs to me. I did the activation myself, now after updating my iphone to the latest update, it required a user id and password to activate the phone, but anytime i enter the details, it tells me the user Id is not correct but the password is correct..

Calendar and Time showing in arabic but my phone's language is English. I bought my phone from DU in UAE , Dubai. Please help me solve this issue while keeping the Region to United Arab Emirates

Calendar and Time showing in arabic but my phone's language is English. I bought my phone from DU in UAE , Dubai. Please help me solve this issue while keeping the Region to United Arab Emirates

Valentine350z wrote:
while keeping the Region to United Arab Emirates
Not possible, I think. Tell Apple how you feel about this at
http://www.apple.com/feedback/iphone.html

HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only t

The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667

http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

I have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem

i have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem

See Here for Device continually restarts...
http://support.apple.com/kb/HT1808

Am facing problem while buying app in appstore during payment . Getting message as" your payment is declined"- please help me solve this issue

am facing problem while buying app in appstore during payment . Getting message as" your payment is declined"- please help me solve this issue

If your payment method is not accepted, here is the formal Apple guidance on the situation. iTunes Store: Changing account information

Z10 not working at all please help in solving this problem

Z10 has been stuck in "Preparing Blackberry HUB" mode for hours despite several restarts and battery pulls. Five swipe solution to restarting HUB only results in screen flashing on and off. Frustrated. Any ideas appreciated. Phone calls too not working, cant receive email, text messages or launch applications although preview screen seems to be working.
Have reviewed other threads for solution with no success. Would rather not use security wipe option.
Please help in sloving this problem

I would start with a Security Wipe:
To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
http://www.blackberry.com/btsc/KB33591
Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
If that doesn't work then use an autoloader to reload the OS:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

My iphone 5 32 gb has an camera autofocus problem, please help me solve this

my iphone 5 32 gb has an camera autofocus problem, please help me solve this

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

Please help me solve this statement

SELECT didt.displayed_name name,
didt.displayed_course coursename,
cour.inst_code,
didt.ched_spcl_ord_no,
to_char(didt.so_issue_date, 'fmMONTH dd, YYYY.') so_issue_date,
to_char(didt.graduate_date, 'fmddth') day,
to_char(didt.graduate_date, 'fmMONTH, YEAR.') graduate_date,
didt.snumber,
didt.diploma_type,
didt.honors,
decode(didt.duplicate_flag, 'Y', 'Duplicate Copy', null) duplicate
FROM diap_details didt, courses cour
WHERE diap_no = '962'
AND honors is null
AND diploma_type <> 'CERT'
and didt.grad_course_code = cour.course_code (+)
--THE CODES ABOVE WORKS FINE BUT WHEN I ADD ANOTHER SET OF CODES I GET AN ERROR
--how can i incorporate the code below with the codes above?
begin
if :inst_code = 'IT' then
return 'REGISTRAR';
else
return null;
end if;
end;
can anyone help me about solving this problem or is it not possible to do it?if its not can someone give me an example or a work around for this? thanx...

Hi,
i need to do is show all the fields that have been selected in the query and depending on the INST_CODE i need to add another field or column which is either REGISTRAR or null value...SELECT didt.displayed_name name,
didt.displayed_course coursename,
cour.inst_code,
didt.ched_spcl_ord_no,
to_char(didt.so_issue_date, 'fmMONTH dd, YYYY.') so_issue_date,
to_char(didt.graduate_date, 'fmddth') day,
to_char(didt.graduate_date, 'fmMONTH, YEAR.') graduate_date,
didt.snumber,
didt.diploma_type,
didt.honors,
decode(didt.duplicate_flag, 'Y', 'Duplicate Copy', null) duplicate
,DECODE(:inst_code, 'IT' , 'REGISTRAR',null) NEWCOL
FROM diap_details didt, courses cour
WHERE diap_no = '962'
AND honors is null
AND diploma_type = 'CERT'
and didt.grad_course_code = cour.course_code (+)
when you run the sql query above, please include the error message/s.
Edited by: bobbydj on Aug 28, 2008 10:28 AM

Good Evening, I bought a Mac Book Pro in Miami and with Apple Care that was recorded in the Apple Store - Lincoln Road. Now I can not get access to Apple Care here in Brazil. Someone tell me what happens? Please help me solve this problem.

Good Evening, I bought a Mac Book Pro in Miami and = with Apple Care thatwas recorded in the Apple Store - Lincoln Road. Now I can not get access toApple Care here in Brazil. Someone tell me what happens? Please help mesolve this problem.

Call Apple Care

Adobe Photoshop Quite Unexpectedly photoshop cc Please Help Me solve this Problem

Please Please Help Me Please

Nobody can tell you anything without proper system information and the crash details.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Mylenium

Please Help in solving this problem

I am getting following error when i try to add content to a node using administration
tool.
I am using WL workshop 8.1 Sp1 and using pointbase database.
Error message is as follows
<Feb 19, 2004 4:49:12 PM GMT+05:30> <Error> <ContentManager> <BEA-415470> <Error
creating Node. Repository: BEA Repository ParentId: 10003 NodeName: date1 Type:
1
com.bea.content.RepositoryRuntimeException: Error creating property: t. Please
v
erify the Property size is within the Repository limits.
at com.bea.content.repo.internal.RepoNodeOpsBean.createProperty(RepoNode
The property type is date. and i am getting same error for String and Integer
also.
Please help.
Thanks in advance.
Mahesh

Thanks for your reply.
I tried changinging driver. but of no use problem persists.
error code generated is as follows
<Feb 23, 2004 11:00:26 AM GMT+05:30> <Error> <ContentManager> <BEA-415470> <Erro
r creating Node. Repository: BEA Repository ParentId: 10003 NodeName: t Type:
1
com.bea.content.RepositoryRuntimeException: Error creating property: t. Please
v
erify the Property size is within the Repository limits.
at com.bea.content.repo.internal.RepoNodeOpsBean.createProperty(RepoNode
OpsBean.java:808)
at com.bea.content.repo.internal.RepoNodeOpsBean.createProperties(RepoNo
deOpsBean.java:594)
at com.bea.content.repo.internal.RepoNodeOpsBean.addNodeContent(RepoNode
OpsBean.java:1407)
at com.bea.content.repo.internal.RepoNodeOpsBean.createNode(RepoNodeOpsB
ean.java:974)
at com.bea.content.repo.internal.RepoNodeOpsEJB_orx781_ELOImpl.createNod
e(RepoNodeOpsEJB_orx781_ELOImpl.java:412)
at com.bea.content.spi.internal.NodeOpsImpl.createNode(NodeOpsImpl.java:
172)
at com.bea.content.manager.internal.NodeOpsImpl.createContentNode(NodeOp
sImpl.java:288)
at com.bea.jsptools.content.backing.BrowseJspBacking.updateContent(Brows
eJspBacking.java:612)
at com.bea.jsptools.content.backing.BrowseJspBacking.handlePageActions(B
rowseJspBacking.java:229)
at com.bea.jsptools.common.AdminToolsBacking.handlePostbackData(AdminToo
lsBacking.java:95)
at com.bea.netuix.servlets.controls.content.JspContent.handlePostbackDat
a(JspContent.java:242)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:216)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:278)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.j
ava:285)
Pls suggest solution
With regards
Mahesh
"Kailash" <[email protected]> wrote:
>
Hi
If you are using weblogic supplied JDBC type 4 driver, switch to vendor
supplied
type 4 (nonXA) driver and it may resolve your problem. For CMS related
tables,
binary files are stored as BLOB in db for which weblogic drivers has
problem.
Regards
"Mahesh" <[email protected]> wrote:
I am getting following error when i try to add content to a node using
administration
tool.
I am using WL workshop 8.1 Sp1 and using pointbase database.
Error message is as follows
<Feb 19, 2004 4:49:12 PM GMT+05:30> <Error> <ContentManager> <BEA-415470>
<Error
creating Node. Repository: BEA Repository ParentId: 10003 NodeName:
date1 Type:
1
com.bea.content.RepositoryRuntimeException: Error creating property:
t. Please
v
erify the Property size is within the Repository limits.
at com.bea.content.repo.internal.RepoNodeOpsBean.createProperty(RepoNode
The property type is date. and i am getting same error for String and
Integer
also.
Please help.
Thanks in advance.
Mahesh

I have problem with browsing. when i browse a new unnessary window is open automitacally. can anyone please help to solv this problem.

an atuomatically page open like this. http://rnzzz.exclusive-rewards.prizespy.xyz/?sov=62551901&hid=gqmqqssogwsokos&kw =DIRECT&email=email&redid=797&gsid=68&id=XNSX.1%3A%3APEERFLY-r797-t68

If you're getting prompts that say something like this:
To view this web content, you need to install the Java Runtime Environment
then the Apple Java runtime is not installed. Some third-party web plugin is installed that depends on Apple Java.
You may have installed the Oracle Java runtime, which is different. Neither installing nor removing the Oracle Java will have any effect on the prompts. The only thing that will stop the prompts is either to install Apple Java, or to remove the web plugin that depends on it, as I wrote earlier. I don't know all the possible plugins that might be involved, but I mentioned a couple of common ones.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Lr5, Please help me solve this mystery.

Similar Messages

Maybe you are looking for