LR5 Spot Removal Tool Bug: Holding Ctrl Sometimes Changes Brush from Heal to Clone

I like the advanced healing tool. Sometimes though, I like to speed up workflow by holding down Ctrl while click-dragging, which is essentially the old spot removal tool. This lets me pick a source faster, since it requires only a single click-drag. Almost all the time I use "heal." However, this Ctrl click-drag method randomly changes the spot edit mode from "heal" to "clone" a lot (not every time though), and I have to keep an eye up there. This is rather obnoxious. I haven't found a way to reproduce it 100%, but it happens all the time on its own, especially switching to new images and activating the tool afresh.
Anybody else having this issue? Thought I would bring it to light, since I couldn't find a discussion topic.
Windows 7 Ultimate 64-bit, if it helps.

This has been fixed in the Release Candidate of Lightroom 5.2, available now at http://labs.adobe.com/technologies/lightroom5-2/

Similar Messages

Spot Removal Tool Bug in LR5?

After using Spot Removal tool in LR5 (Mac), and sending to further edit in CS5, single spot removals are retained, but dragged removals are not. Upgraded to 5.2 and still same problem. If sending a single image with both spot and dragged spot edits to CS5, only single spot removals are retained in that image. Help please.

PS CS5 and Camera Raw 6.x don't support the new features in LR 5. You need to use LR 'Edit in PS' and then select 'Edit a copy with Lightroom Adjustments.' Is that what you are doing? I'm using LR5.2 Final with PS CS6 and ASR 8.2 and it appears to work fine.
However I am expereincing the feathering issue with LR5.2 Spot Removal tool:
http://feedback.photoshop.com/photoshop_family/topics/lr_5_2_is_not_rendering_correctly_ph otos_with_spot_removal_applied_in_lr4

Spot Removal Tool Bug

I wanted to clone out a small area at the bottom left corner.
I placed a spot removal area with the centre at the image corner so that the upper right quarter of the circle covered the area I wanted to clone out.
This resulted in a much larger area to be affected with strange freckles.
The buggy effect only goes away if I move the target area sufficiently away from the corner.
And yes, spot removal can become agonisingly slow. I had a lot of edits already and adding a few spot removal applications was painfully slow. No more interactiveness, just setting and hoping that in 10-20 sec. things will jump into the right place.

Turn off the auto mask. It can be too aggresive.
I believe the engineers are aware of it.
Rich

Spot removal tool target area selection not visible

When using the LR5 spot removal tool I can perform cloning or healing and LR automatically selects the target used to clone from, but I cannot see where this area is on the image. A pin should appear with a line connecting the area to be removed and the target area used to clone from. I see no pin. Is this controled by a setting?
Jack

Great, that works. Keep on learning.
thanks

When using the spot removal tool, the sampled area is not showing. I fully remember that I am seeing this before--I already had updates of my LR5

When using the spot removal tool, the sampled area is not showing. I fully remember that I am seeing this before--I already had updates of my LR5
Is this just a setting?

Thank you! I feel so stupid -- I did search the internet--maybe not hard enough.

Very Slow Spot Removal Tool in LR5?

Hello,
Has anyone else noticed the SPot Removal tool being very slow in LR5? I don't even mean when painting a selection. Just moving the mouse around the screen is sluggish and jittery for my on my Win7 system.
Thanks for any suggestions,
~Steve

I am running Windows 7 (64 bit) with an i7-3930k processor (12 cores at 3.2GHz), 64 GB RAM, an SSD boot and app drive, a separate SSD scratch drive for Adobe stuff, and 2 GeForce GTX 580 GPU's (3 GB video RAM each). WIth this setup, I wouldn't say that LR4 ran perfectly, but it was a lot better than LR5 is running for me.
I haven't gotten out of the Develop module with LR5 yet, so I can't say anything about printing or exporting, but most of the adjustment sliders are stickier than in LR4. It takes a few seconds for any adjustments to be seen on the image after moving the slider. This was most noticeable for me with the local Adjustment Brush. Painting the mask work fine, but after that any adjustments take 3-4 seconds to appear on-screen. The adjustments like Sharpening and Noise Reduction under the Detail panel take a few seconds to appear. I know I'm asking for help here, but please understand that I don't have time to check every slider and function within the application. It's very obvious to me that LR5 runs much slower than LR4.4 on the same computer.
Here's my System Info from Lightroom if you're interested:
Lightroom version: 5.0 [907681]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 12
Processor speed: 3.2 GHz
Built-in memory: 65477.5 MB
Real memory available to Lightroom: 65477.5 MB
Real memory used by Lightroom: 1327.1 MB (2.0%)
Virtual memory used by Lightroom: 1298.9 MB
Memory cache size: 0.0 MB
Maximum thread count used by Camera Raw: 6
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 2560x1600
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5
Library Path: E:\Users\SATX79\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
Settings Folder: C:\Users\SATX79\AppData\Roaming\Adobe\Lightroom
Installed Plugins:
1) Behance
2) Canon Tether Plugin
3) Export to Photomatix Pro
4) Facebook
5) Flickr
6) HDR Efex Pro 2
7) Leica Tether Plugin
8) Nikon Tether Plugin
Config.lua flags: None
Adapter #1: Vendor : 10de
          Device : 1080
          Subsystem : 15883842
          Revision : a1
          Video Memory : 3019
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 4224
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: NVIDIA GeForce GTX 580
ShaderModel: 11.1
Vendor: Nvidia
VendorID: 4318
Version: 10de:1080:15883842:00a1
Also, when I looked this up, I checked the About dialog. The credits pane doesn't scroll. :-)
Thanks for your attention,
~Steve

Spot removal tool in LR5

The spot removal tool has stopped working in LR5.
Does anyone have any ideas how to resolve?

Thanks a lot Bob. Easy when you know how!!! James
Blog: http://www.jamoroki.com
James King
about.me/jamoroki
<http://about.me/jamoroki>

Spot Removal tool should be an extension of the Adjustment Brush

I am glad that LR is taking steps in the right direction to improve the Spot Removal tool with the new Healing Brush feature. However, I agree with others that the interface needs improvement. Though I am probably not the first, I feel I have the solution:
Integrate the Spot Removal tool into the Ajustment Brush tool. Here's why.
I think an improved interface for the Spot Removal brush tool (Q) already mostly exists in the in the form of the Adjustment Brush (K), and indeed the two tools should share the best of their respective features and controls. The current Adjustment Brush has most of the features we are looking for in the Healing Brush:
Pre-brushing Size of brush (already implemented in the Spot Removal tool)
Pre-brushing Feathering control
Pre-brushing Flow/Density control (already implemented in the Spot Removal tool as Opacity)
Partial erasure of selected brush stroke masks, while maintaining the above brush controls (by holding the ALT key in Windows, aided by making the Mask Overlay visible (O))
Pre- and Post-brushing adjustments of each Spot Removal brushstroke for White Balance, Tone (Exposure, Contrast, Saturation, etc), Sharpness, etc.
Adding the above features would be an incredibly useful approach to the Spot Healing tool, and would be a natural extension of the interface we already are familiar with. Both the Adjustment Brush and Spot Removal tools could be further improved by these additional features:
Post-brushing Size of circular brush (already implemented in the classic Spot Removal tool)
Post-brushing Size of painted brushstroke (supposedly already newly implemented in the LR5 Beta Spot Removal tool, though I haven't been able to get it to work on mine)
Post-brushing Feathering control
Post-brushing repositiong of painted brushstroke (already implemented in the classic Spot Removal tool)
In summary, the Spot Removal tool should really be an extension of the Adjustment Brush. They should live in the same control panel (with a Clone or Heal ON/OFF toggle switch). The Adjustment Brush could benefit a bit from the addition of a couple of the existing post-brushing features of the Spot Removal tool.
The two tools are really one tool, they just don't know it yet. Let's introduce them to itself.

A few weeks ago, I posted the silly graphic above. It is a Venn diagram of my interpretation of Lightroom 5 Beta's three main local adjustment tools' strengths, weaknessess, and overlapping powers. Each tool - the Adjustment Brush, the Spot Repair & Advanced Healing Brush, and the Graduated & Radial Filter - has one or more discreete powers or traits. The three tools each overlap a neighboring tool in an important aspect (e.g. the Adjustment Brush and the Advanced Healing Brush can each be used to paint any freehand shape to be adjusted). By default, the descreet "Super Power" of one tool is a "Super Weakness" of each of the other two, which lacks that power (e.g. the user can make additions or partial erasures to any mask overlay with the Adjustment Brush, but neither the Advanced Healing Brush nor The Radial Filter has this power).
In the very center of the diagram is the overlap of all three of the local adjustment tools. In this triple-overlapped zone, there is currently no existing tool. I theorize that there could be a special sort of new local adjustment tool, which combines all of the powers (and none of the weaknesses) of the individual tools of which it is composed. Inspired by the notion of cartoon supeheroes teaming up to combine their powers, I gave it the tongue-in-cheek name "Super Friends Awesomesauce Brush". However, my vision for such a tool is completely serious. Basically, I envision it as an "Advanced Adjustment Brush"
For example:
Paint a shape on the image with a feathered brush. (A transparent colored mask overlay guides the user in the same way that the traditional Adjustment Brush does, as lollololli correctly suggests above as an easier way to paint a selection.)
Pick up that brushstroke with the mosue and place it in another part of the image.
Enlarge or reduce the overall size of the brushstroke with the Size slider.
Increase or decrease the overall feathering of that brushstroke's edges with the Feather slider.
Erase with the freehand erasure brush the portions of the mask that you don't wish to interact with the image.
Convert that brushstroke into a healing repair.
Resize that repair shape larger or smaller, and/or change its aspect and rotation as needed. (Transformations to the shape of the target brushstroke, not necessarily transformations of the shape of the healed or cloned sample pixels)
Increase or decrease the exposure or color temperature of the repair.
Or,
Create a new Radial Filter on the image.
Adjust the exposure, white balance, Gaussian blur, etc. of the filter.
Subtract from that Radial Filter by erasing with a second erasing Radial Filter at the same pin-level
Add back to the Radial Filter with a freehand feathered brush as desired
Or,
Maximise the brush size and minimize the feather setting and paint a solid mask overlay over the entire image.
Convert the mask overlay to a Clone repair - you have now created a second duplicate layer of the entire image on top of the original (BTW you can already do this step with the Advanced Healing Brush set to Clone and size 100 in LR5 Beta).
Subtract from that clone repair with a Radial Filter erasure to create a "hole" that shows the base image underneath.
Make independent exposure, white balance, and sharpening adjustments for both the base image (seen through the Radial Filter subtraction "hole") as well as the cloned top layer.
Reposition and resize the Radial Filter erasure as needed.
Add to and/or erase from either the Radial Filter erasure or the cloned top layer with radial filter shapes or freehand brushstrokes as desired.
I see this proposed Advanced Adjustment Brush as a very powerful localized adjustment tool. Although It really isn't a new tool at all, because it is almost completely based on the existing local adjustment tools. Additional enhancements (more geometric shapes such as polygons) could take its flexibility even further.

Spot remover tool / healing brush. How do I get the brush to show up and work??

It seems I can only get the spot remover tool to work on certain photos and in certain areas of said photos . On the one picture I really need this for--where the problem started--I had used it once without much success (it was working then, but I didn't do it right). So I left the picture and worked on another. When I came back to the first picture, I brought up an earlier version of it, before the initial spot removal, to work on. Now I can't get the brush to even show up on the frame, although other tools are working fine. I've checked on other pictures and it seems that many times the spot remover brush won't show up. WhY???

Great. There are other keyboard shortcuts when using this tool like the forward slash key and holding down shift if cloning an area that is a straight line. And don’t forget you can click on the word reset. Take a look at this short video tutorial from Adobe TV.
http://tv.adobe.com/watch/adobe-evangelists-julieanne-kost/lightroom-5-advanced-healing-br ush-and-visualization-tool/

Lightroom 5 Spot Removal Tool Lags and is not usable (Temp Workaround?)

Lightroom 5 Spot Removal Tool Lags and is not usable. The Spot Removal Tool really is pretty essential to the usability and workflow of Lightroom 5. Checking the other tools alongside the Spot Removal Tool, it appears that the Red Eye Correction Tool is also affected. Might it have something to do with the Process Version? I noticed when working with some older image files (using the 2010 Process Version), the Spot Removal Tool worked as previously experienced. Current images that have been "upgraded" to the New Process Version (2012) are now incapable of utilizing the Spot Removal Tool due to its very laggy and sporadic response. I've never experienced an issue like this with Lightroom (LR user since LR2). Mac OSX 10.7.5, 3.4GHz i7, 8GB 1333MHz DDR3
I've also noticed that reprocessing an image can revert the Spot Removal Tool to "useful" again (reverting from 2012 to 2010, then back to 2012). Doesn't always work and doesn't always "stick", as closing and reopenling LR usually reinitiates the laggy Spot Removal Tool.
I haven't seen anyone mention the Process Version as a potential culprit, nor have I seen any reliable workarounds. Reprocessing an image (or set of images) at least works for me for a while, though it would sure be nice to not have continue reprocessing images every time I open/use Lightroom 5.
LR5 is great and is all I need for the majority of my images. Unfortunately for me, though, that usability also necessitates the Spot Removal Tool's unhindered functionality.

For some reason, it's clear that not everyone is experiencing such a massive slowdown / bottleneck when it comes to the Spot Removal Tool. If all users experienced this issue to this degree, they would have been clamoring for Adobe to address and rectify it immediately.
With all due respect, Sean, to make a suggestion like that proves you do not experience / have not experienced this issue / don't understand the severity to which this issue can affect workflow; simply "turning off noise reduction and lens correction" is definitely not a fix. If 16GB of RAM doesn't fix the issue, do you really think simply turning off noise reduction will? And as Bert Nase points out, to do that to large volumes of images increases workflow in a program designed to streamline workflow for large volumes of images.
1- One option is to change the process version in your first photo (2003/2010), then copy-paste that develop setting to the rest of your images. This will get all of your images to the point in your workflow where you can use the Spot Removal Tool on each image. Once spot removal is done, reconvert each image back to the current process version (2012) then re-accomplish the spots that reconverting lost.
2- Configuring presets is one work-around option, though you will need at least couple of them tailored to your workflow.
3- Changing your import settings to an earlier Process Version is an option, then accomplishing Spot Removal on each photo, then updating the Process Version on one and copy/paste to the rest, then re-accomplishing for each photo the spots lost in the conversion and continuing your workflow from there.
Readers of this thread can use the link above, but it can introduce its own issues, too. As noted, switching back-and-forth between Process Versions can delete some of your already-corrected spots and you'll have to re-correct them. Worse, a window prompt asking to create a virtual copy or proof will occasionally begin popping up.. closing the window, clicking "cancel", or choosing any other option in that pop-up window won't be "remembered" and the window pops back up with any further "click" on the image. Lightroom has to be shut down and the computer restarted for the issue to reset.
Yes, it's very frustrating and time consuming to say the least. So, unfortunately there is no fix, still only work-arounds. Hopefully this issue will be addressed and remedied in either the coming release of 5.2 (doubtful) or the Cloud version of Photoshop + Lightroom.

LightRoom3 LR3 - Spot Removal tool soooo sloooooow

LR3 is generally working fine for me.
It was slow to start with, but I saw that it was doing a lot of disk acivity in the background when I upgraded from 2.7 -> 3
I left it alone to do it's think and it's been fine for the last week.
BUT .... one thing thats changed (for the worse) is the spot removal tool.
It's so slow it's beyond a joke.
It almost looks like it's trying to completely render the image where I'm only interested in a small part of it changing.
Where I could adjust to the pixel and release it to re-render, now I get to move the spot destination swab for about 4 seconds then it stops .... and I have to wat for almost a minute for it to finigh picking it's nose (or whatever it's doing) before it comes back.
Then I have to try fine tune it again, but if I don't get it right then I either have to guess it or wait another minute before it lets me move it again.
I have an i7 CPU and virtual CPU #4 goes 100% while it hangs. All the rest bounce about at 10-15%
So frustraiting. What should be a quick atch/repair tool has become unusable.
My only workaround is to export to CS and patch/clone in there ... unless it's sensor dust in which case it can take up to 20 minutes just to de-spot a picture and batch process across a set.
PC spec:
XP64 SP2
i7 CPU
12Gb DDR3 1866
SSD primary and scratch disk (same one partitioned)

Right .... I think I might have cracked it.
I noticed that TIF files were much worse than .NEF or .DNG.
The Raw files would be a bit more tolerant and I tried setting the write to .xmp to [on] and it improved a bit, but after a bit of editing it would become sluggish again on all tasks ...
If I switched off the [xmp] write AND the "Include metadata changes in TIFF/JPG PSD files" it becomes a lot more responsive.
All I have to do is Ctrl+S after I'm done and the Metadata is written (within a second).
I think that LR keeps trying to constantly update the metadata and catalogue + render all together and it couldn't keep up (even though I use SSD and have an i7 with 12Gb 1886 memory).
I also had an extra boost by telling the system to create 1:1 previews of the files I'll be editing. This takes some time depending on the source data sizes and compression (go make some tea), but it improves performance by doing all the initial start-point rendering in advance rather than on the fly.
I can now work at normalish speed again (Yay!). It is still a bit more clunky than LR2.7, but it's useable again and it is faster in other areas.
NOTE: By switching off the auto-update XMP and Metadata features, you could potentially lose edit updates to your files and updates don't transfer when the files are opened in other apps.
To avoid this you only have to do the Manual save of changes to the files by pressing Ctrl+S or manually in the menu:
Metadata | Save Metadata to File
After you do that all other apps pick up the updates to the files

Spot removal tool lethargy with large image

Question: is there a way to speed up Spot Removal in my circumstance?
Background: 16-bit 4x5 scanned B & W image - 1.04GB .dng file
Win 7, 64-bit, 12 GB RAM, dual CPUs
With large images, spot removal is very slow, and becomes exceedingly slow as the number of spots increases.
I have Lightroom 5 configured to use 10 GB cache
I have cleared the cache, closed other apps, re-booted windows, with no increase in speed
Windows task manager reports 0-35% cpu load, 4-6GB RAM used including the 1.5 GB consumed by the OS
I do know that file size may be an issue -- Lightroom reported that a 1.32GB image is too large to load.
What will work, if anything, to speed this up?

PS CS5 and Camera Raw 6.x don't support the new features in LR 5. You need to use LR 'Edit in PS' and then select 'Edit a copy with Lightroom Adjustments.' Is that what you are doing? I'm using LR5.2 Final with PS CS6 and ASR 8.2 and it appears to work fine.
However I am expereincing the feathering issue with LR5.2 Spot Removal tool:
http://feedback.photoshop.com/photoshop_family/topics/lr_5_2_is_not_rendering_correctly_ph otos_with_spot_removal_applied_in_lr4

Spot Removal Tool and cropped images

When I crop an image and then decide I want to use the Spot Removal Tool I end up having to undo the crop before I use the Tool. Why? Because if I crop first and then use the Tool the selected replacement area often comes from outside the crop. If LR5 gets the choice wrong (it's not perfect, I accept that) then I have to undo the Spot Removal, undo the crop, guess what I need to Spot Remove, use the Tool and then Crop again.
Can you fix this to ensure that the Spot Healing Tool only uses replacement areas from WITHIN the crop? Many thanks.

What I do is to zoom out (usually 4:1). Then move the mouse cursor outward along the direction of the line connecting the source area (not visible) and destination (visible) area until the mouse cursor turns into the hand. Then I'll drag the source area back into the cropped image where it becomes visible. Finally, zoom back in and move the source area to the location of my choosing.
Hope that helps.

Spot Removal Tool: Waaaaay Too Many Mouse Tracks

LR4, Mac OS 10.6: When using the spot removal tool, it adds to the history each and every mouse intermediate position, even ones during the time the mouse button was held down. LR3 did not do this, and in addition (possibly for the same reason), LR3 was a whole lot smoother mousing. Right now, all this extra history makes history pretty much useless. Is this a bug, or (shudder) is this intentional? Regardless, will it get fixed? Or, is it somehow me? Is this some sort of bizarre preference setting?

i have this problem, too. very aggravating for so many reasons.
i use LR4.1, imac i7, 8gb, lion 10.7.3 and i often have literally a hundred mouse entries in the history panel.
vince

I have lightroom 5 but the visualize spot removal tool is not showing up?

I have lightroom 5 and the visualize spot removal tool is not showing up. I have updated the software and restarted my computer and its still not showing up. Why is that?

Press the T key to show the toolbar

LR5 Spot Removal Tool Bug: Holding Ctrl Sometimes Changes Brush from Heal to Clone

Similar Messages

Maybe you are looking for