LR5 won't see my Hasselblad H3D

Using a Hasselblad H3D, and whilst I have downloaded the tether plug in and its shooting tethered fine, it's not bringing up the camera as a source to down load files shot into the CF card. Is there another plug in….
Any help appreciated. thanks dean.

First make sure that all connections are secure, both power and communication. Can you check the drive in another machine? Replacement drives are about $30 US at places like newegg.com
Regards,

Similar Messages

Camera Raw 5.4 beta plug-in error with Hasselblad H3D-39

Whenever I open a .3FR file taken with my Hasselblad H3D-39 in Adobe Camera Raw 5.4 Beta I get
"Error. Unable to read the ful size image. There was an unknown error"
and a white exclamation mark inside a red octagon shows at the top right corner of the image.
Any idea why and what the implications are?
Thanks,
Antonio

Hi Antonio,
Two questions...
1. Are you sure you are using the dialog inside 64-bit Photoshop, or is it possible that you are using the Bridge-hosted Camera Raw dialog to open the files? To check this, verify which application is the current, active, application in the Windows tool bar while the Camera Raw dialog is up (you may have to exit full-screen mode to see it).
2. Can you open the file if you quit and re-launch Photoshop/Bridge then attempt to re-open the file, does the error still occur?
Thanks,
David

ThinkPad Bluetooth Sees Other BT Objects, but Won't See My BT Mouse

My ThinkPad T420S Bluetooth is happily paired with my BT Printer and with a ThinkPad Bluetooth Mouse. It will also "see" my BlueTooth phone when I make the phone's BT discoverable. When I tried to pair it with a new Lenovo BT Mouse or with a new Targus Bluetooth Comfort Laser Mouse by using Bluetooth's "Add Device" Box, however, neither mouse would appear in the "Add Device" box.
I have a ThinkPad 420S, Windows 7, 64 bit, Microsoft Bluetooth Enumerator (driver version 6.1.7601.17889) and ThinkPad Bluetooth 3.0 (driver version 6.5.1.4500). The Device Manager says that my Bluetooth is working properly.
When my ThinkPad failed to "see" a new Lenovo ThinkPad Laser Mouse, I assumed that the new mouse must be faulty and returned it. But now that it won't see a new Targus BT Comfort Laser Mouse, either, I'm puzzled. In both cases, the mice had new batteries.
What baffles me is that my ThinkPad's bluetooth can see other discoverable BT devices -- including my old Lenovo BT Laser Mouse, which I was trying to replace because the left button has started to get temperamental.
Puzzling, no? Any suggestions?

Upon further research I have learned that A2DP is not supported with any OSX 10.4.11. I think using Jack might be as close as I can get.

Extension Manager won't See My products?

Hello,
I am running windows 7 64bit and have the CS5 Master suite. Due to low disk space I installed the suite on an external drive which the computer saw as (I) Later I installed a Card reader and it changed all my drive letters, so now the hard drive is seen as (L). For awhile a was able to use Photoshop or any of the programs until I figured out how to change the path in properties to go to the (L) Drive instead of looking for a non existant (I).
Now I can open the products, but the Extension manager won't see them at all and when I try to install a new purchase or download I get this: http://prntscr.com/spmmq and this is the version I am using http://prntscr.com/spn0a, I do have CS6 as well, but it crashes 2-3 times a day from random things and I have a lot of stuff my photoshop has to load, so it takes almost 1.5 hours to get back up after a crash.. grrr!!!
I tried downloading CS5 Extension manager to reinstall it, but when I did that it was forcing the installation the the non existant drive (I) I couldn't change the path and when I went to unistall the Extension Manager, there was no option for it to be removed??
So the question is... is there a way to have my extension manager find the products on the (L) drive???
Thank you for any help,
J

using the Microsoft BlueTooth driver is a requirement for Desktop Manager, not an issue. Please read task 2 of the following article from the public knowledge base:
KB04132 How to set up Bluetooth connectivity between a BlackBerry smartphone and BlackBerry Desktop Software
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

JoeyV325 wrote:
Is there a way to move music/apps from one ID to a new ID?
No.
One of you create a new AppleID and one use the existing AppleID.
But you can still use the items in each iTunes library.
Create separate computer logins for each of you.
This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

Mac Mini - Core Solo - Won't See Any Wireless network

I have a Mac Mini, first gen Intel, Core Solo, that won't see any wireless networks. However, it will see my extreme basestation, and my two airport express devices over bonjour, which makes me think that the wireless device is working.
I've reset the PMU, with no luck.
Any suggestions?

Does an Airport card show in the system profiler?
Is Airport switched on in your mini - the Airport icon in the menu bar should show at least grey bars rather than an empty white 'fan' shape?
With Airport on, when you click on the Airport icon, does it show any network?
If you click on 'Join Other Network' and type the name of the wifi network you run, what error message does the system give?
How far away from the wifi base station is the mini? What kind of structures and environment is it in?
If you move the mini to be in close proximity to the wifi base station, does it show any signal?
When you download a copy of AP Grapher (http://www.chimoosoft.com/apgrapher.html) and run it, what does it show for signals, noise etc?
How is the mini seeing any wifi devices via Bonjour - do you have it wired into your network? If so, the fact that the devices appear via bonjour doesn't mean they are transmitting wifi, nor that they are in range.
By the way, the Core Solo mini doesn't have a PMU to reset. If you used the PMU reset procedure it won't have helped, and may actually have caused problems. The correct procedure for an Intel-based mini is an SMC reset, as follows:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, *making sure the power button is not being pressed* at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.

Mac Book Pro won't see my iTunes Library on an external drive

I have a brand new Mac Book Pro and my iTunes Library is on an external drive. My computer won't see this Library even if I change the location under Preferences. All I can see are my purchases from the iTunes Store on my iCloud. I don't want to clutter up my MBP with my iTunes Library so what should I do?
I'm running Yosemite and latest iTunes
Thanks for any help
Les

Really a library, or just media? A library is a complete collection of files an folders including the critical iTunes Library.itl file, generally all enclosed in an "iTunes" folder. You do not direct iTunes to open a library with preferences, you do it by holding down the option/alt key while starting iTunes and guiding it to the .itl file you wish it to use.

IMac won't see HDD, no matter what I do - Please help!!!!

Hi,
I have a 2009 iMac 24in (4GB RAM, 500GB 7200rpm) and ever since I upgraded to Snow Leopard, I have one problem after another. I have erased the HDD on numerous occasions, 7 and 35pass, due to it not seeing the HDD, have tested (iDisk) the HDD and all seems fine, reset PRAM & SMC, tried safe mode etc, but nothing seems to work.
It will boot from CD, but every time I try to install, it won't see the HDD. I have tried connect via Firewire to another Mac, but only on one occasion was the HDD seen; that said, I was able to retrieve data, so at least that's one saving grace.
It's still under warranty, so I'll be taking it to Apple and dumping it on them, but given that I cannot afford to buy another Mac to replace this one, I was hoping that someone could give me a few pointers to getting this going, whilst my MacBook Pro is being sorted out.
Yes, I have two Macs in trouble (MBP has black screen), but I need one working for business use, whilst the other is being sorted out.
I really hope that someone can help me with this one, as I'm pulling my hair out!!
Thanks in advance.

Hi,
There's no doubting the cost per GB, particularly from Apple, but would I be wrong to assume that my overall user experience would not be better with SSD, than with HDD; taking cost to one side of course.
I use my Macs for business and quite honestly, the downtime I have experienced is more costly than the extra cost per GB of an SSD.
Appreciate that SSD technology is fairly new, but I work in the Film and TV industry and nearly every new camera with on-board recording is using SSD technology and I don't hear of many complaints or issues, as far as reliability and stability of the technology is concerned.
I do accept that an SSD in a computer is going to be doing a helluva lot more work, but the technology has to be better right?
Ultimately, am I making a good move or another making another howler by opting for SSD over HDD?? I acknowledge that's very broad question and open to a lot of opinions/personal preferences etc, etc.
Thanks.

Macbook Pro won't see CD as boot option

I have tried using two different OS install disks but the computer won't see the disks as a startup option. I have tried booting by pressing the option key after the tone and the C key. I have gone in through system prefs to choose the CD to boot from but it doen'st show up there. The disks do show up on my desktop and I can open the folder etc... Also, I can use the drive for watching movies and stuff. I have no idea why this won't work and it's honestly driving me up the wall.
The OS is 10.6.8 and I have tried the install disk for OSX Tiger and OSX Mountain Lion (I think). One is black and one is gray if that helps.
The orginal problem is resetting my admin password because I cannot figure out what I put in originally. Please be clear, I did not steal this Mac. I just don't remember what I put in and my hint makes no sense.
I have called Apple support but they want 50 bucks to talk to me and I can't see paying that. Honestly the request itself ****** me off.
I don't know what else to include but there you go....help?

SachaRathe wrote:
I don't have that disk and all online forums including ones on this site say to use the disk closest to your OS and you'll be fine. There has got to be a way to fix my issue without paying a bunch of money.
Why not?
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

IDVD won't see movie folder

Working on imovie project. Went to create idvd for the project. Wanted to rename the project and did so in finder. Now idvd won't see movies in the movie folder. Have tried resaving the project out of imovie as a different name, created a new folder for movies etc... any thoughts.

Hi LBuchman !
I am suprised you haven't had a good answer by now.
I am new to iDVD 06 and have not used iMovie much.
I have been working on an iDVD project,
and had a similar problem, as I had moved my Movie files
out of Movies folder to make room.
I believe your problem may have occurred
when you changed your title in FINDER.
I would try going back to your last working iDVD project file
BEFORE you changed it's title in FINDER;
and in iDVD > File > Save As
change your title AGAIN there.
I believe it was the changing the title OUTSIDE of iDVD,
the iDVD lost track of IT"S PARTS.
As far as your Movies folder--
iDVD looks for your movies
in WHATEVER FOLDER you specify in
iDVD PREFERENCES > Movies Pane.
I hope you have already worked yourself an answer,
or I hope this helps.
Best Regards, Ken

Bios won't see s-ata disk...

My bios won't see my WD 36,7 Raptor. When i start windows installer, it give me the F6 choise and i install the Fasttrak 376 driver or s-ata 376\378 driver (tried both), then windows is about to start installing but can't find my hardisk. Everything is connected correct so i don't understand whats wrong.
can anyone help me, please? tnx

press ctrl + f during boot up and create a raid array.
THEN you press f6 key as you described.
you need to create a raid array even if its only 1 drive.
you should also consider to change that crap psu you got.
a q-tec 400w is MUCH worse than a enermax 300w for example and they tend to blow up way to often

Mtn Lion won't see CanoScan LiDE 90

10.8.2 won't see my CanoScan LiDE 90 scanner, which worked just fine via Preview until very recently (must be a recent sw update caused this?) I've installed new driver from Canon, but system doesn't recognize it's there -- not even in Apps. Any ideas? Thanks.

You might try the page below. You can ask Canon for help:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide90#ServiceAndSupport

Disk Crash, reinstall, won't see previously published pages.

So my HD crashed and I had to reformat and reinstall the system and iLife. Now iWeb won't let me create a new page and it won't see the pages that are up on my .mac account. I don't really care about the old pages. i just want to get rid of them and start over, but iWeb won't work now.
Any ideas?
Eric

Your iWeb data is stored, not in your actual html files, but in a file called Domain.sites which is stored in your Home/Library/Application Support/iWeb folder. You should backup this file whenever you make big changes to your site, because if it gets lost or damaged, you will have to start all over. If you want to work on your site on another computer, copy this file to a thumb drive to move it around.
Since it sounds like you don't have this file, my suggestion would be to make a new site with the EXACT SAME site name as the old site, then Publish ALL to .Mac. This should wipe out the old site.
For your future reference, I have an Automator app on my site that will help you backup your Domain file(s). http://iweb.aardvarkland.com

New MBP won't see Panasonic HVX

Hello,
I have a new MBP and a Panasonic HVX 200. When I try to connect the camera to the computer (with an adapter cable) the computer won't see the camera. It still comes up on my old iMac (via 400). Any thoughts on what the fix is?
Thanks.
Wolf

Wolfwill23: Sounds like a bad cable or adapter. If you're using the same 400->400 cable to connect the camera to the iMac, and adding a 400->800 adapter when connecting to the MBP, then the adapter is probably bad. If you're using a 400->400 cable with the iMac and a 400->800 cable with the MBP, then the latter cable is suspect.

Lr5 won't install on my mac

Cs6 has uploaded fine, Lr5 won't it just keep saying .... "you are running an operating system lightroom no longer supports ...i'm on a mac and have L4 installed now and working fine
thanks

The oldest version of the Mac operating system LR 5 will install & run on is 10.7
So if you wanted to use LR 5 you’d need to update your operating system first. I know it's a pain, but at least it’s no big expense. Before you go ahead you’d also need to determine whether your Mac will run the current version 10.8 – you can check that here…

LR5 won't see my Hasselblad H3D

Similar Messages

Maybe you are looking for