LR6 bug - while recropping a pano with GPU enabled goive blue screen with cross

Hi,
I encountered a bug in LR6 related to GPU enabled. It does not happen when GPU is disabled. When first crop a picture (pano in this case) all goes well. However, when i want to recrop the picture i get a blue screen with cross. When i disbale the GPU feature, i can recrop. I am using the following GPU:
GPU-info:
Intel(R) HD Graphics 4000
Check OpenGL support: Passed
Vendor: Intel
Version: 3.3.0 - Build 10.18.10.4176
Renderer: Intel(R) HD Graphics 4000
LanguageVersion: 3.30 - Build 10.18.10.4176
Kind regards, Alexander

Similar Messages

Cs6 with gpu enabled,match color slugish

Hi
i notied that cs6 64bit with gpu enabled (no matter witch video card installed or drivers) loaded 2 images in my case 14mp zoom-> actual pixels
the match color sliders are sluggish even with the last intel cpu and 32big ,windows 7 64bit
can someone please check and eventually confirm?
thanks

hi give it a look at this link
http://helpx.adobe.com/photoshop/kb/gpu-opengl-features-preferences-photoshop.html
Mode > Normal Uses more GPU memory and enables GPU-based color matching, tone mapping, and checkerboard blending.
the odd thing is that it's happen using full screen mode with menu bar and zoom ratio different from fit to screen or full size
it's not slow , but it's not instantaneous like others tools like curve or levels
the cpu during moving the sliders is @ 20% and the gpu is around 10%

When trying to save page in Yahoo! Bookmarks, I receive blue screen with message:A problem occured while trying to save bookmark. Please try again later. I get the same message every time.

When I click on Yahoo Bookmark Icon & click on Save this page,
I get the normal screen Save To My Bookmarks, etc. I fill out as
normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??

At the top of yahoo bookmarks there is a message:
To Yahoo! Bookmarks users:
Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
Hope this helps :)

Lightroom 6 is displaying a blue screen with a white X through it in the Develop module for all my photos

I can see a large version of my photo in Library mode, but in Develop module, all that appears is a blue screen with an X in it. Has anyone else experienced this? How can it be fixed?

I went to the performance tab and LR6 is not even using my GTX860 card, it's using the onboard Intel HD Graphics 4600. Lame. And I'm still getting the blue screen.
I disabled the GPU use and LR6 sped up considerably, oddly enough, especially the crop tool, which was very slow with LR6. Everything was always lightning fast with 5 and appears to be back to normal after disabling the PGU, so I'm fine with just leaving it disabled. Yeesh.
Will try to update the NVidia drivers and post back.

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

Blue screen with cursor at boot. And everything after that.

Dear Forums,
(Please note, I'll refer to the machine as a Server, but it is only using 10.4 client; I am merely using the Sharing capabilities of such).
I have a MDD G4 that I'm using as a server. When I start it up, I get the Blue Screen with Cursor (BSwC) at boot - and it never goes past that. (Can't move the cursor either).
I have read the articles
http://docs.info.apple.com/article.html?artnum=106464
And Dr. Smoke's
http://www.thexlab.com/faqs/startupitems.html
http://www.thexlab.com/faqs/repairprocess.html
I've also tried AppleJack and clearing out caches, zapping PRAM, etc. All the standard fare.
It will boot into safe mode just fine, and it is still acting as a server just fine.
I have also tried Multiple Users (to no avail).
I tried a reinstall of Tiger, which, interestingly enough, didn't give me the option for Archive and Install and Preserve, but instead only gave me the option to Upgrade (hm, from Tiger to Tiger). While this fixed nothing, the server continued to work after this.
Then I had the bright idea to install the OS to the 2nd drive I had within. 'Surely this would work,' I thought. But alas. It did not. In fact, clean installation, new disk, (and yes, I booted from this 2nd disk), the same BSwC problem.
So, please, Dear Apple Support Discussions, let there be someone out there smarter than I (I'm really not that smart, but I do follow instructions well).
-Ty

How long did you wait for the blue screen to go away? I also have a iMac G5 2GHz ALS.
My computer has been having a problem where on the first boot of the day, it it would hang in the gray screen for about 1.5 minutes and the blue screen for about 4 minutes. I thought it was permanently hung but discovered that it would eventually present the login screen. I could then login normally but none of my firewire external drives would mount. I could restart over and over and the same situation would be present.
Resetting the SMU seems to cure the problem and rebooting would be quick and all firewire drives mounted correctly. I could then reboot as many times after and normal behavior of the iMac would be repeatable.
However after having the system down for several hours and restarting it, the problem would be back.
I have now moved all my firewire drives to a powered hub and will watch over the next day or so to see if that changed anything.
Robert

Upon start I get a blue screen with B817977E

HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac. This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work. Holding the on button in does not work. If it does come on My computer connects wirelessly, but does not print. Then it will not shut down.

lonnlar,
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

Lightroom 2015 version on creative cloud I am getting a blue screen with x mark when i am switch from library to develop mode

Hi Chandan,
Kindly try the below mentioned link.
Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
Please share the results once you have tried the steps.
Thanks,
Atul Saini

Can't get past the blue screen with "starting Mac OS X"

I am having problems with starting my iMac. It gets to the blue screen with "starting Mac OS X" but won't go beyond that point. I was able to get the disc drive open with the help of other posts, holding down the mouse while turning on the computer, but the drive won't stay closed with the install disc in it. I have even tried holding down the "c" key while restarting the computer and it wouldn't work. Any help would be greatly appreciated. So much info that I could really use. Also, please keep in mind that I am not too computer savy. Simple language please.
Thanks

If the steps I provided in my earlier post are not helping, then I see your options at this point as follows:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. Performing an Archive and Install. For important tips on this, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order.
3. Take the computer in for service. If there is an Apple Retail Store in your area, I'd recommend taking it there. You may wish to call ahead to make an appointment at the Genius Bar.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

Blue screen with sound after clean install

Hi Everyone,
I have just replaced the hard drive on my MacBook Pro A1226 Model. The install went fine when it finished all I get is a blue screen with the osx music in the background.
I have tried deleting the ApplicationEnhancer file using single user mode, I have tried removing all the ATI Extensions but still no luck. I was able to get the welcome video up once but was unable to select my country or continue. I have also tried to complete the install using safe boot but no luck.
Any ideas or help would be brilliant.
Thanks in advance

Safe Boot by restarting your computer while holding down the "shift" key. Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory. A corrupt cache here can cause the blue screen crash. Once you restart normally, the cache will be recreated. This should take care of the issue.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
osx music
Music plays on startup?

Lightroom 6 Develop module: no picture but instead a blue screen with a cross over it.[was: Something wrong with a program]

dear Sir,
I have just bought Lightroom 6 and downloading went as axpected. Although the most of the modes worked well the developing mode did not show the picture but instead a blue screen with a cross over it. I have downloaded the program twice and it is still the same error. I thing their is a error in the program you are selling.
Below you will find a copy of the e-mail sent to me received following my buying th program
ID: <Removed by Moderator>
Beställningsnummer: #<<Removed by Moderator>
>Beställda produkter:
Adobe Photoshop Lightroom 6 (Mac/Win,Engelska)
<serial number removed>
PLEASE HELP ME!!!! OTHERWISE I HAVE TO RETURN THE PROGRAM!!!!
GLENN

Hi Glenn,
Try to unchecked GPU Acceleration under Preferences>Performance tab.
Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
Regards,
Sumit Singh

Blue screen with kernal_data_inpage_error

I have Yoga 2 13 and it has been quite slow for a long while. Now in the mids of my work, blue screen appeared showing: '"default boot device missing or boot failed"'.Afterwards another blue screen with kernal_data_inpage_error appeared. I managed to run the PC again, but it hangs and the blue screen appears unexpectedly, I have runned RAM and windows diagnosis and they showed all fine

T
his Stop message indicates that the requested page of kernel data from the paging file could not be read into memory. This Stop message is usually caused by a bad block (sector) in a paging file, a virus, a disk controller error, or failing RAM. In rare cases, it is caused when nonpaged pool resources run out.
Try running check disk to start with and see whhat happens and of cause a virus scan

Blue screens with my new P45 Neo3-FR motherboard

Blue screens with my new P45 Neo3-FR motherboard
I have recently purchased this Motherboard and being trying since few overclocking combinations unsuccessfully
I have a Dual Core E8400 Rev.E0 processor and the best I had so far is 3.6 MHz (400x9) at stock voltage.
I am trying to achieve 450 FSB (450x8.5) stable with memory @900 MHz.
I have increased Vcore to 1.28v and 1.31v, Vram is on 1.9v and I left all other voltage settings on Auto.
Disabled CPU C1E function and & Spread spectrum.
As soon as i raise the clock over 400MHz is when the problem start.
Most of the time is happening when the machine has been left (idle) for a while, I just click anywhere,or just start a programme
and suddenly I get a blue screen and the machine re-boot, and again I run Prime for 3 hours (torture test) and not a single blue screen.
Very weird..
I have 2 MB (2 x 1024) dual corsair memory DDr2 PC6400 XMS2 (5-5-5-18) modules and an ordinary Ati Radeon Powercolor HD 3600 graphic card.
I tried to run both memory stick in single mode and one at the time, but still getting those blue screens.
I have built this system re-using a couple of years old power supply from Hyper (505W).
I need some advice as I am trying to establish which component is to blame.
Could this be caused by the PSU, perhaps malfunctioning or inadequate for this motherboard ?
Also thinking about the memory....memory seems running OK till 960 MHz with processor at 400 x 9 (1:1.20 ratio).
Or perhaps is the Motherboard ?
I have Vista Home Premium Edition OS.
Please advice guys.

Hi Guys,
I`ve just updated to Bios v.1.71b
Raised FSB to 445 Mhz and kept multilier to 9x (445 x 9 = 4.005 Ghz)
Vcore to 1.335v
Dram to 1.904v
MCH to 1.304
VTT FSB to 1.34v
ICH still on Auto
Disabled C1E support, Spread spectrum and Intel EIST support.
Set ram to 1:1.00
Tested several times with Super PI & Intel Burn Test and machine is stable so far.

Satellite L635-10P - Stuck with system repair and blue screen

Help!
I have a satellite L635-10p with Windows 7. Windows does not load, getting blue screen after the 4 colorful glow bug, windows icon. Safe mode also resulting in blue screen
System repair is stuck in a black screen with movable cursor (white arrow).
Do not have recovery disk. misplaced it. lost.
please advise:
1. how I may get the data, document files from the desktop?
2. how to fix this?
thanx

Hi there,
If you don't have Windows DVD then i advise you to download Ubuntu Live CD. You can run it without installing it, and you can backup you data from there.
If you have DVD with Windows on it, insert it and wait for it to load. When it loads then hit "Other options" or something like that or maybe "Advanced" and there you will find "Command Prompt" hit it and in the console type "notepad.exe". Why you may ask, well you will get Notepad window and you can browse your hard drive and copy and paste data. If you can't see all files just be sure to select "All Files" in File types. That's the way I backup up my data.
2. What is the error on the blue screen ? Have you tried to Google for it ?
Regards Strahinja.

LR6 bug - while recropping a pano with GPU enabled goive blue screen with cross

Similar Messages

Maybe you are looking for