LR6 upgrade version installation problem.

I bought LR6 as an upgrade version . When installing extracts the files to start the installation program but when the progress bar reaches the end of the run , it all off. The installation process does not start on. What can I do? Widows 7 64bit

Hi Dariusz Szubiński,
It seem that there is some problem with the permissions, try the below mentioned steps.
1.
extract the file to local drive.
Try to install it.
2.
Enable hidden admin: Enable and Disable the Built-in Administrator Account (Standard 7 SP1)
Initiate the installation.
If you still not able to resolve it, you can also try to extract it on another machine and can take the package back to this machine.
Thanks,
Atul Saini

Similar Messages

SAP Netweaver trial version installation problem

Dear friends
I tried to install SAP netwaever tial version on my labtop. I followed the instruction excatly as shown in the website www.sdn.sap.com. the first confusing thing I faced that during installation of MS loopback adapter I found that the network adapter I cfreated dose not contain (internet protocol TCP/IP instead I had internet protocol version 4 TCP/IPv4. however I used it and do IP address as specified. then I continue installation and when I finished I didnt find the following in my start up menu Programs u2013> SAP NW 7.01 ABAP Trial Version u2013> NSP. only a SAP Management Console was installed. Now I tried to uninstall SAP netweaver from my system in order to reinstall again, but I couldn't uninstall completely and each time I tried to reinstall the system keep give me waring massage that SAP already installed. even I used the registery clean tool but still facing the problem.
Please help me to completely uninstall all the SAP component from my system in order to installed it again.
Thanks in advance
Edited by: rizik_Hilan on Nov 6, 2010 8:24 PM

Dear Faisal
Thanks for your reply I will use the links yo sent to me in yor reply bt first of all I should uninstall all SAP component from my system. each time I run setup from image folder I always get the following massage " the Wizard has detected an already SAP system NSP on this host. Uninstall first." I need a way to remove the remaining SAP . I uninstall every folder I saw in my harddrive related to SAP and also I used registry clean tool bt still I face the problem
For yor help my friends

CS6 trial version installation problems

I am having trouble installing Indesign CS6. I have a macbook air OS X, version 10.8.1
I have waited for 12 hours to the program to download. It finished and I saw a window that showed that the program was opening but the problem is that at the end a window appeared with "sum is not valid". So I cannot open it. I don´t get it, what did I do wrong? Please help!

It seems that the download might have become corrupt during download. It may happen due to a spotty or slow internet connection.
You could try disabling the Veryify Checksum option under disk utilities and retry running the installer.
If that does not help, I'm afraid, you might have to download again. If you have the option, use a wired connection rather than a wireless one.
If your internet connections is too slow, the problem may reoccur. Coudl you let us know what type of internet connection do you have?

Older version installation problems

Recently I updated to Firefox 8.0. I've got loads of problems with it and trying to go back to version 7. However every time I reinstall it, and I open FF again, it automaticly opens version 8. I think I've tried everything, including unchecking the option "automatic update" in the options. What am I doing wrong and how can I fix this?

errors faced are older version of bonjour and apple software update cannot be removed
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update and Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

SAP NetWeaver 2004s Java Trial Version installation problem

I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .

Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .

Illustrator Trial Version Installation Problem

I am installing Illustrator trial version, it stopped at 34% when installing AdobeHelp, the remaining minute keep increasing from 8 minutes to 132 minutes, I have stopped and restart my computer and re-install yet same problem occur again. should I stop or continue?

Dear Rave,
Good day to you!
Thank you for your promptly reply.
I have manage to download CS5 Illustrator instead, and I need to manually
select those files to be installed, that including AdobeHelp, Adobe
Download Assistant, Adobe Air, Adobe Media Player, then the entire
download is completed finally.
I am still keen to install CS6 to try when I have the time to do so, I
hope by then I can solve all problem.
Thanks & Best Regards,
Robin Ong
<Signature with personal contact information removed by Moderator>

ITunes 10 later version installation problem

I am using Windows 7 home edition 64 bit.
I cannot use my iTune 10 with my iPhone 3GS and I cannot install iTune 10 newer later versions.
iTune version 10 cannot be used/synchronised - no file transfer/updates.
Says "Cannot uninstall Bonjour" when I tried to update iTunes later version.
Any known issues and how to go about it.
Help appreciated.

But when it comes to start update/installation - it continues to prompt to locate the quicktime.msi and itune.msi files and when I did - the installation refuses to continue - and continue to prompt to locate the installation files - .msi files.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Next, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Adobe XI trial version Installation problem

I have the trial version of Adobe XI. It will not complete the installation. I tried 2 times. I have XP Home, could this be the issue?

What error does it give exactly? What are the exact system specs?
Mylenium

NAS 4.0 evaluation version installation problem on SPARC/Solaris 2.8

Installing the NAS 4.0 that was bundled with a Sun SPARC/Solaris 2.8 throws
the following error:
( Installed with quick installation after correct installation of iWS 4.0,
from documentation Directory Server installed is not needed since NAS
installs its own)
In December of 1999, the Sun-Netscape Alliance announced
i P l a n e t A p p l i c a t i o n S e r v e r 6.0
* 100% J2EE compliant
* reliability and high availability for non-stop service required by
the Enterprise
* scalability to go the distance for unplanned success
* the best performance of any web application server
* broadest support of tools for J2EE application development
* high performance and complete solutions for internet enterprise
integration
Information and availability of this next generation application server
can be found at
Please enter the install location [usr/netscape/server4]:
Please enter the FULL PATH of the Web Server Instance to be used
for NAS:
/usr/netscape/server4/https-sofiana03.sofiana
Please enter the password for Netscape Directory Server Adminstrator
and Netscape Application Server Administrator.
The password needs to tb be at least 8 characters. [changeit]:
Installing Netscape core components
Installing Netscape Server Family Core Components
Installing Netscape Directory Suite
Installing Administration Services
Installing Netscape Application Server Suite
Starting the NAS install ...Installing Netscape Application Server 4.0
Core
Binaries
Extracting Netscape core components ...
Extracting Netscape Server Family Core Components ...
Extracting Netscape Core Java classes ...
Extracting Java Runtime Environment ...
Extracting Netscape Directory Server ...
Extracting Netscape Directory Server Console ...
Extracting Netscape Administration Server ...
Extracting Netscape Console ...
Extracting NAS Web Connector Component ...
Extracting NAS Core Server Component ...
Extracting NAS Administrator Component ...
Extracting NAS Deployment Manager ...
Extracting Netscape Application Server 4.0 Core Binaries ...
Fatal Slapd The required field AdminDomain is not present in the install
info fi
le.
Configuring Administration Server...
Your parameters are now entered into the Administration Server
database, and the Administration Server will be started.
Changing ownership to admin user root...
Setting up Admininistration Server Instance...
ERROR: Ldap authentication failed (151:Unknown error.)
Proceeding with installation of Netscape Application Server (NAS)...
Reading userinput log file ..... done
Configuring web server plugin
....../usr/netscape/server4/nas/bin/nas_postinstall
..ksh[49]: /usr/netscape/server4/https-sofiana03.sofiana/start.1007: cannot
creat
e
mv: cannot access /usr/netscape/server4/https-sofiana03.sofiana/start.1007
/usr/netscape/server4/nas/bin/nas_postinstall.ksh[188]:
/usr/netscape/server4/ht
tps-sofiana03.sofiana/config/.obj.conf: cannot create
mv: cannot access
/usr/netscape/server4/https-sofiana03.sofiana/config/.obj.conf
ERROR: Variable KIVAwebdocs was not defined. This command:
/usr/netscape/server4/nas/bin/.kconfns
/usr/netscape/server4/https-sofia
na03.sofiana /usr/netscape/server4/nas
did not set the DocRoot variable correctly.
Please make sure that this file exists and is executable:
/usr/netscape/server4/nas/bin/.kconfns
This NAS installation might not be succesful.
Please enter the WebServer docs directory pathname:
==>
What's WebServer docs? entered usr/netscape/server4/docs didn't help.
Thanks for the support
Pablo

hi,
Make sure that your network uses DNS naming.
This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
regards,
saravanan

SAP NetWeaver 7.01 ABAP Trial Version INSTALLATION PROBLEM !!!

Installation stops always when it's got 18%. The load_datasave file is getting biger and biger all the time...
Log file:
Tue Nov 04 13:39:50 CET 2008 MaxDB: Start SoftwareCheck
Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepProgPath:
Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepDataPath:
Tue Nov 04 13:39:50 CET 2008 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Tue Nov 04 13:39:50 CET 2008 MaxDB: end of Check Section!
Tue Nov 04 13:40:50 CET 2008 MaxDB: Start of Extracting Software and Backup.
Should I wait??
I have been waiting for 3 hours till now and and there is constantly 18%
Please help;)
Edited by: Piotr Wieleba on Nov 4, 2008 4:39 PM

Hello Piotr,
I would not wait. I would start again.
Bye,
Peter

Netweaver 7.0 Trial Version Installation problem

Hi Gurus!
I'm installing the trial version but got stuck when the wizard ask for the DNS Domain Name for SAP System. I don't know what to enter.
Please Help,
Derick

Try the IP address then 127.0.0.0 , perhaps that would help.
regards,
Advait

Adobe flash CS3 professional trial version installation problem

hi,
I am trying to install the adobe flash CS3 professional
trial version on windows installed and it complains that "internet
explorer"
is opened. I killed all the processes "iexplore.exe" , it
still complains the same thing. Please let me know...am i missing
something?

Direct Download Links for Adobe Software
Mylenium

Netweaver Sneak Preview ABAP Version installation problem

hi,
I could install to the step Database Insatnce Creation with this error:
ERROR 2015-06-02 23:33:54
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
And in the file XCMDOUT.LOG this such message was found:
> Subprocess starts at 20150602233354
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n Cosinus -d NSP -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : exit
> Subprocess stops at 20150602233354
Error! Connection failed to node Cosinus for database NSP: ERR_USRFAIL: User authorization failed
How can I fix this?
Thanks!
TD

<i>NSP: ERR_USRFAIL</i>
this is because , the previous installation's max db was not removed properly.
if you remember the previously used password for db use the same when specifying the password for superdba, control , etc.
or else, run the uninstaller from the new extract (2004s) and start a fresh installation after that.
Regards
Raja

Photoshop CS2 Upgrade Installation Problems w/ Vista Problems

I recently purchased a new laptop w/ Windows Vista which I'm trying to install my copy of Photoshop CS2 onto. My Photoshop license is an upgrade license ... originally upgraded from Photoshop v4.0.
When installing an upgrade copy of PS CS2, it requires proof of your previous version in order to verify you're a legitimate upgrader. This works fine if you're upgrading from a version of Photoshop after 5.x ...you simply insert your CD and the installation continues. The installation process is less straight-forward for users like myself ... installing from an upgraded version prior to 5. I'm required to call Adobe ... and conduct a phone verification procedure where I give them a code displayed on the screen during installation and they give me a response code to type into the installation form.
I deauthorized my old laptop ... start the installation routine on my new laptop ... call Adobe w/ my verification code ... enter the response code (which is accepted) and complete the installation without any problems. My problem occurs when I go to run the software. The startup screen indicates that the software is still in "Tryout Mode", and the first window I'm presented with is the "Adobe Activation" window requesting my serial number. If I try to enter my CS2 serial number it is rejected with the message:
"You must enter a valid serial number before activating online or viewing activation options. Please check your serial number and re-enter it, or click the Purchase button to buy a copy of this product"
The thing is ... this IS a valid serial number. I've confirmed this with Adobe. (It's probably an upgrade serial number, which is why the software is rejecting it). I called Adobe and they're now telling me that I must enter a paid-support agreement in order to receive help installing my software. They claim their software is working correctly, and it must be a problem with my computer.
Has anybody experienced a problem like this? I refuse to pay more for something that worked fine on XP just to use it on Vista due to bugs in their installation and activation routine.

function(){return A.apply(null,[this].concat($A(arguments)))}
mthight wrote:
Have the bugs of using with Vista been fixed, or still not working? thanks,
I know this is an old problem, but surely there is an answer to fix the problem by now...
What problems? I used Photoshop CS2 with Vista with no problems (I still have it installed on a Vista system if you'd like me to check anything in particular). CS3 and CS4 worked well as well. Haven't tried CS5 on Vista as I have moved up to Windows 7, but I suspect it works just fine.
-Noel

B1 Upgrade failed to launch the new version installation

Hi all
I encoutered the following problem when upgrading SAP B1 V8.81 SP0 PL5 to PL6. The Upgrade test showed no errors and the upgrade on the server finished properly. But then i started the client and got the message "The system cannot find the file specified. The B1 upgrade failed to launch the new version installation."
It is not possible to deinstall the SAP Client because there is no such point under control panel > software! Does anyone know this behaviour? When i try to start the client from the b1_shr folder the message appears that there is already another version installed.
Could it be a problem upgrading from PL5 to PL6 because they are both upgrade packages and not patchlevel updates?
Thanks for your help.
Greets
Marco

Hi
I do not understand this sentence:
>> When i try to start the client from the b1_shr folder the message appears that there is already another version installed.
You have to run the SAP B1 client in the server to start the upgrade.
Did you open SAP B1 client in server machine? Did SAP show you message to upgrade?
All the best.
Agustin.

LR6 upgrade version installation problem.

Similar Messages

Maybe you are looking for