LR6 vs LR5 performance measurements
Here are some quick measurements I've done so far. System is running Windows 7 64-bit, i7-3770K quad-core processor overclocked to 4.5ghz, 32GB DDR, LR catalog on SSD, raw files on 7200RPM HD. Video card is NVidia GeForce GTX 650 Ti - GPU acceleration confirmed functional under LR6.
Importing 74 D800 raw files with 1:1 previews
LR5.7: 4 minutes 43 seconds
LR6: 4 minutes 58 seconds [same with GPU acceleration on/off]
Exporting 74 D800 raw files to JPEG, full-size, 80% quality, all default develop options
LR5.7: 4 minutes 3 seconds
LR6: 2 minutes 53 seconds
The Export module is making better use of multiprocessing. Here is a comparison of CPU utilization between LR5.7 and LR6 for the D800 export:
Regarding utilization of GPU acceleration, I analyzed LR6's operation under Microsoft's Windows Performance Analyzer and found the following:
Import+Preview Generation: Doesn't use GPU
Export: Doesn't use GPU
Develop Module 100% initial zoom/rendering: Modest amount of GPU utilization
Develop Module Adjustment sliders: Significant GPU utilization. All sliders found to use GPU
Develop Module Adjustment brush: Significant GPU utilization
Here is a sample of the GPU utilization for an adjustment brush operation, with only the exposure setting used:
Similar Messages
-
Performance measure of Office 365 site
One Office 365 site is running with provider hosted app, but it is comparetively slow. What performance measure should be taken for it's successful running?
Hi,
According to your post, my understanding is that you want to measure of Office 365 site.
For SharePoint server on-premise, we can use the Visual Studio Team System (Team Test Load Agent)
to measure the performance capacity of the farm.
http://technet.microsoft.com/en-us/library/ff758659(v=office.15).aspx
For Office 365, there is a tool called AgileMonitor which is a cloud-based, end-to-end performance monitoring solution for Software-as-a-Service based applications.
http://www.agileit.com/office-365-performance-and-availablity-monitoring/
As this is the forum for SharePoint server on-premise, I’m not familiar with the SharePoint online, for this issue, I recommend you can post a new question in the forum for Office 365/SharePoint online.
http://community.office365.com/en-us/forums/154.aspx
More experts will assist you, then you will get more information relation to SharePoint Online.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Hi,
Can u please tell me
Interviewer ask me this question
what are performance measures taken as part of ur projectHi Ganesh,
Please go trhough this help:
Analyzing Web Dynpro Java Application Performance with a Simple URL-Parameter
Some examples here on how to measure the performance related issues in Web Dynpro applications.
http://help.sap.com/saphelp_nw04s/helpdata/en/b5/7e1141e109ef6fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/8dd7406efa702ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ad/32b5403fd63426e10000000a1550b0/frameset.
Thanks
Krishna -
Performance Measurement - CRM UI
Hi,
I am working on a CRM Search Application which involves development of a CRM BSP UI for the CRM Sales area. The question I have applies to all CRM applications that have a BSP UI.
Is there any means/tool using which I can measure the overall time spent from the CRM UI to Backend and then back to CRM UI?
There are a few business objects used in the backend and also some filtering and formatting logic on them. Also, there are multiple components involved. What I need is a tool by which I can measure the following:
1. The overall time spent (UI -> Backend -> UI)
2. If there are more than 1 components in the backend, share of total time consumed in each component.
3. Total time share for each Business Object in the backend
I tried the Performance Monitor (CNTRL + SHIFT + F7) but the results are not accurate in some cases.
I would be very happy if you suggest me a tool that can achieve this.
Thanks in advance.
PruthveeshHi,
Checks that the parameter disp / gui_auto_logout is equal to or greater than the parameter rdisp / plugin_auto_logout.
If the parameter TIMEOUT (icm / server_port_ <x> = PROT = HTTP, PORT = xxxx, TIMEOUT = xxx, xxx = PROCTIMEOUT) has defined, parameter overrides the keepalive. -
Upgrade to LR6, very slow performance
I just upgraded to LR6, now the program runs considerably slower than LR5. I'm using a Mac mini late 2012, 2.3 GHz, i7 with 16GB ram. Can someone point out to me what I seem to be missing? In short, LR5 was good and fast, LR6 really slow. Thanks.
Dido, but surprisingly ACR is faster using the GPU acceleration...
Give that a try and see what you think. -
Hai
We finish the BW-Implementation for our client . And we build some Bex-report.
Now we need to measure the 'Query Performance' and 'Performance Of BW-System'.
So how can measure the performance in terms of query and modeling, dataloading .
pls let me know
kumarHi,
You can do that through ST03.
But for that you need to activate the statistics cube and the business conatent query.
It will give the time consumed by the queries and other stuff.
Open this link
the fist search option is the how to document just save it on the desktop.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=how%20to%20set%20up%20bw%20statistics&cat=sdn_all
Thanks
Message was edited by:
Ajeet Singh -
System performance measurements
I just finished the snow leopard upgrade without a hitch. While my macbook pro appears to be slightly faster I would like to see some numbers. I have looked around and I can not find any information on memory utilization. As simple as it sounds I would also like to confirm that my system is running in 64bit mode. Your tips on where to find the performance data would be greatly appreciated. -thanks!
It's not going to be easy to confirm the speed difference; they are subtle and tough to measure, especially if you don't have your same system running 10.5 to compare.
As far as 64 bit mode, open Activity Monitor and ensure the "Kind" field is visible, and you can see that applications are running in 64 bit mode. The kernel itself defaults to 32 bit mode for a number of good reasons, but if you want to read a bunch of bickers about it, have a read here. Apple default the kernel to 32 bit for numerous good reasons. If you're not running > 8 GB of RAM and running a server, you really do want the kernel to run as 32 bit. -
LR6 freezes after performance option checked
I recently upgraded to LR6 and now am having problems with develop mode. I checked the box for video card performance, and my card shows up. It is nVidia 745M with 2GB RAM. My laptop has a 2.4Ghz Intel i7 dual core processor. When I am in library mode things work fine, and the video is much faster. However when I click an imge and try to go to the develop the image area goes grey and freezes. The only way out is to cancel LR and not get any editing done. If I restart it and uncheck that box in the performance settings I can work OK. Is there a fix for this?
Original install of LR CC had the box checked, but the device was disabled. Not sure why, but it was getting a Windows Error 43, which is a catch-all. I did some snooping around and installed an updated BIOS, and the latest video driver, and the device was recognized. Then the box was unchecked by LR. So with the older versions of BIOS & driver it was checked but disabled; with the newest its is unchecked and recognizes the video card. I can use LR without it checked, but I think it needs more work by Adobe. Seems a little counter-intuitive; and why recognize a 2 GB graphics card if it won't work right? Thanks for your help.
-
Performance measure for BPEL process using Oracle BPEL Process Analytics
Hi All,
For measuring perfomance of a bpel process, can we use Process Analytics? Is this to be purchased separately? Is any other tool available which can be used measuring performance of a bpel process. & produces graphical reports etc? (product / open source)
Your help is highly appreciated.
Thanks in advance.
Regardsyeah you are 100% correct ..
I have attached some stuff for CDH integration, where we used plsql to send out info on a created record to a queue.
CREATE OR REPLACE
TYPE XXBPEL_MESSAGE_TYPE AS OBJECT (
MSG_ID VARCHAR2(128),
INREPLYTO_MSG_ID VARCHAR2(128),
FROM_PARTY VARCHAR2(512),
TO_PARTY VARCHAR2(512),
ACTION_NAME VARCHAR2(512),
MSG_TYPE INT,
PAYLOAD CLOB,
ATTACHMENT BLOB
EXECUTE DBMS_AQADM.create_queue_table (queue_table => 'XXBPEL_QTAB',queue_payload_type => 'XXBPEL_MESSAGE_TYPE',multiple_consumers => TRUE);
EXECUTE DBMS_AQADM.create_queue (queue_name => 'XXBPEL_OUT_QUEUE',queue_table => 'XXBPEL_QTAB');
EXECUTE DBMS_AQADM.start_queue(queue_name => 'XXBPEL_OUT_QUEUE',dequeue => TRUE,enqueue => TRUE);
On BPEL side creata a process that listens to this queue (with and AQ partnerlink) as shown in $BPEL_HOME/integration\orabpel\samples\tutorials\124.AQAdapter\MulticonsumerInbound
thx clemens -
Analysis for Office as Citrix Add-in - Performance measure
Hi experts,
could you suggest me some tool to measure the performance of Analysis for Office used as Citrix Add-in?
Thank you very much.
Best Regards
AndreaThank you Diego.
I would to do a stress test, with different session concurrently, of Analysis Add-in in Citrix and measure the memory and cpu consumed.
So i need something that permit to :
1) simulate concurrent use of Analysis Add-in
2) measure the performance and resource used during this test
To avoid risk when the more than 100 people using concurrently Analysis add-in and occur CPU or memory issue.
I find some tools that permit to do this analysis, for example: Citrix Edgesight, but i would know if someone have done these analysis before to release to Analysis for Office as Citrix Add-in.
Regards.
Andrea -
I just upgraded to LR6 from LR5 and it will not load.
When I start it, the opening screen comes up along with the Library page. The last processed image is there but it's under the LR6 opening image. The small "Loading" dialog box is there, but it's not doing anything. I've rebooted, deleted LR5, rebooted and have let it sit for 15 minutes. I then click on Library and the upper part of the screen goes black and the mouse pointer turns into a circle and just sits. If I click again, the screen becomes a translucent white and that's the end. I get the "Program is not responding" dialog box. I have to close the program. I've done this several times with no change. Any ideas?
DavidWell, I tried a couple of suggestions I got from other sites to no avail. Then I deleted LR6 and reloaded it....same result. I guess that means that I will have to contact support via phone. That doesn't make me happy and why? Because they will tell me to do this, that and there fore which should have been written into the software in the first place. I have a "regular" computer; a Win7 64 bit machine on which LR5.7 works just fine.
David -
Performance Measuring of Weblogic Server
I do performance testing for our own software applications. So far our web
servers have been WIN NT running IIS 4. Now, our development group have
started to work with WebLogic.
I have never worked with Weblogic and I feel a little in the dark. Where
could I find information on how to do Performance monitoring for a WebLogic
Server?
Any information would be appreciated.
FranciscoI suggest contacting their technical support.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Eran Shtiegman <[email protected]> wrote in message
news:8fr11d$mq0$[email protected]..
Thanks,
I downloaded the product, but still haven't got it to work with WLS ...
Has anybody gotten the current version to work with WLS ?
Thanks,
Eran
"Ron Anderson" <[email protected]> wrote in message
news:[email protected]..
Try http://www.wilytech.com/
The product is Introscope.
ron
Eran Shtiegman wrote:
Are you sure that is the right link ? It points to a static webpage
of
a
financial consulting company ...
What is this product ?
Eran
"Michael Girdley" <[email protected]> wrote in message
news:8fgc33$c9b$[email protected]..
First, I suggest looking at the information located in the WebLogicconsole.
Second, as of version 5.1.0, we have a clean integration with a very
nice
product from the folks at http://www.wileytech.com (I believe that
is
the
right URL :-) that will likely help you.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Francisco Kendall-Montes <[email protected]> wrote in message
news:8fep2k$hun$[email protected]..
I do performance testing for our own software applications. So
far
our
web
servers have been WIN NT running IIS 4. Now, our development
group
have
started to work with WebLogic.
I have never worked with Weblogic and I feel a little in the dark.Where
could I find information on how to do Performance monitoring for aWebLogic
Server?
Any information would be appreciated.
Francisco -
HDD performance measuring in Solaris 9
How can I measure HDD performence and a total performence of mashine ?
(I have 6x Seagate Chetah Ultra Widw 320 SCSI HDD on the some chanal, 2xIntel Xeon 2.8GHz, 2GB RAM) ORACLE installed on them, work slower them another mashine (1x Seagate Chetah Ultra Widw 160 SCSI, 2x Intel pentnium III 1GHz, 512MB RAM) by the some database.
Thenks.How are you testing these configs? What makes you think one is slower then the other?
-
Performance Measure - Select SUM and Collect Statement.
Dear All,
I am using YNME_PROCESS_PO_CUST Badi in this i writing some validation Delivery Completion.
For that i need to calculate GR qty and Delivery quantity based on this i need some validation. But here i confussed which statement i need to use for bast performance.
Note: In Badi Item Level Data will be process one by one..like item level 10 then 20 then 30......Like that
Code will like that---
SELECT SUM( menge ) FROM ekes
INTO l_delqty
WHERE ebeln = ls_mepoitem-ebeln
AND ebelp = ls_mepoitem-ebelp.
SELECT SUM( dabmg ) FROM ekes
INTO l_grqty
WHERE ebeln = ls_mepoitem-ebeln
AND ebelp = ls_mepoitem-ebelp.
l_delqty1 = l_grqty - l_delqty.
IF l_delqty1 NE 0.
ls_mepoitem-elikz = ''.
CALL METHOD im_item->set_data( ls_mepoitem ).
ENDIF.
I check in SE38 response is better in this code.
Other code may be like that .. same data will be like upper/
SELECT * FROM ekes
INTO CORRESPONDING FIELDS OF TABLE it_ekes
WHERE ebeln = ls_mepoitem-ebeln
AND ebelp = ls_mepoitem-ebelp.
LOOP AT it_ekes.
MOVE-CORRESPONDING it_ekes TO it_ekes1.
COLLECT it_ekes1.
CLEAR it_ekes.
ENDLOOP.
READ TABLE it_ekes1 INDEX 1.
IF sy-subrc EQ 0.
l_delqty1 = it_ekes1-menge - it_ekes1-dabmg.
ENDIF.
IF l_delqty1 NE 0.
ls_mepoitem-elikz = ''.
CALL METHOD im_item->set_data( ls_mepoitem ).
ENDIF.
Can any send me document--
Regard
DKHi,
Single Select statement is certainly better.
But no need to do select * and using into corresponding fields. These will reduce the performance. Also the loop statment is not absolutely correct. Following could be a sample code.
TYPES: BEGIN OF gx_ekes, (maintaining same sequence of fields as in select statement, this way no need of into corresponding fields)
ebeln type ebeln,
ebelp type ebelp,
menge type bbmng,
dabmg type dabmg,
END OF gx_ekes.
DATA : lit_ekes TYPE TABLE OF gx_ekes,
git_ekes TYPE TABLE OF gx_ekes,
wa_ekes TYPE gx_ekes.
SELECT ebeln
ebelp
menge
dabmg
FROM ekes
INTO TABLE it_ekes
WHERE ebeln = ls_mepoitem-ebeln
AND ebelp = ls_mepoitem-ebelp.
LOOP AT lit_ekes INTO wa_ekes.
COLECT wa_ekes INTO git_ekes.
CLEAR: wa_ekes.
ENDLOOP.
CLEAR: lit_ekes.
Now the first record in git_ekes will have the sum as only one line item is being passed in the user exit.
Regards,
Pranav. -
Java library for performance measuring in Linux
Hi everybody!
I'm going to extend an agent-based system. My agents should be able to evaluate performance data like eg CPU workload in Linux systems.
Are there any java libraries, which are able to read out that information??
Thanks in advanceNot in standard java.
You will need some OS specific stuff that you either write or acquire to gather that information. If you need to write it then you will be looking at either JNI or Runtime.exec().
Maybe you are looking for
-
How can I get the bookmarks to show in the sidebar again. It is checked as always but after using a program to clean up unwanted or corrupt files, the bookmarks will not show in the sidebar.
-
Incremental refresh in Planning Desktop only processes 1 member
Hello, We're running Essbase 9.2.0.2 on AIX, Planning Desktop 9.2.0.2 on Windows, 2003, and Oracle 10g R2 on an AIX machine also. We copied our Oracle schema "X" to schema "Y" and linked it to a new Planning Application. Now, whenever we run a refres
-
Introduction of SSLM into a MSFC-FWSM-CSM Bridge Mode Configuration
Hi, Need serious help here.. I'm facing a challenging situation here. Customer just purchased a pair of SSLM module for their web server HTTPS termination. Here's the situation. Currently customer already have a pair of Catalyst 6509 running with MSF
-
Third party encoding for use with iDVD?
Hello All, I have been doing a little bit of research on this, but I think I need some answers from more experienced users. Are there any third party apps that do a better quality job of encoding video for use with iDVD? I edit my videos in Final Cut
-
I have 50k photos in iphoto and it is a mess and always has been. Always crashes when scroll fast etc etc. Faces does not even work. All I want to do is somehow organize my photos...is Aperture or the Adobe lightroom progams better....