LRS Model with measure

I have been looking into using the supplied Network Data Model with LRS in 10G. I used SDO_NET.CREATE_CREATE_LRS_NETWORK to create the network model. Reviewing the tables created I noticed the NODE$ table contains a measure column. Can anyone give me an example of how this would be used? Is this measure column to accommodate non-node points?

When you create an LRS network, it allows you to hook linear referenced geometry data to your network. All analysis is still done using the link, node, and cost information you store, i.e. geometry information is not used.
However, by having a measure value associated with nodes, you can extract the coordinates of the node from a linear referenced geometry using the measure as an input value to the LRS function sdo_lrs.locate_point

Similar Messages

Model with 2 fact tables

Hi all,
i have a model with two fact tables, both of them containing these columns:
- some measures
- foreign keys for dimensional tables
- column year
- column month
I have to build a model with both of these two tables, including a unique time dimension. Do anyone knows how i can do to make a unique dimension for both of the tables?
Thanks in advance,
Regards

A time dimension (or date dimension for that matter) are quite independent and you can find N good generic time/date dim structures out there (with proper Y/M/DAGO keys, calendar vs fiscal rollups etc etc).
But if you only want to create a single common time/date dim based on what you have in your facts, you can just follow (as a quick win before thinking about how to structure a physical time/date dim) Stewarts basic example here:
http://www.rittmanmead.com/2012/12/obiee-transactional4/
"Building a Date Dimension" a bit further down the page.

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
Manjunatha

Hi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks.

Java Script Error while deploying a Model with Value Help

Hi,
I am using EP 7.0 SP 10.
I am trying to deploy a model which includes the Value Help for an Input field, and i am trying to deploy this model.
The model compiles successfully, but gives a Java Script Error while deploying the model,
! Error on Page
When Click on this java script error, it shows that ,
Line:14985
Char 1: Error
object does n't support this property or method.
code
URL: <serverhost>/VCRes/WebContent/VisualComposer6.0/bin/223334.htm?24102006.1712.
The Same model works in dev server, and it fails in the production server.
Thanks and Regards,
Sekar

Hi jakob,
Thankyou for your quick response.
I did a basic model with the help of a documentation which i got from this forums.I created a iView and from there i used Bapi "BAPI_SALESORDER ".
I created a Input Form and a outpot form (table view).I tested model and am able to get the output.but when i try to deploy it is giving me the error.
And i think am not paring any formulas here.
Please guide me.
thanks and regrads
Pradeep.B

Error while binding the model with the custom controller

Hi All,
I first started with a dummy project and in that binded the model with the custom controller.
For some reason, I deleted the project and created a new one. I have deleted the whole project from the workspace.
Now, when I am trying to bind the model again , I am getting an error when selecting the response parameters saying that DUPICATE ENTRIES.Ideally it should not happen when I am deleting it completely.
I am using a Webservice Model. Can any one help me out to resolve the same.
Looking forward for your response.
Regards
Dipendra

Hi Raman,
I did that and even I have Installed the IDE again.
Still I have that error.
Regards
Dipendra

Hello Everyone, I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume. Using BootCamp I

Hello Everyone,
I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume.
Using BootCamp I installed windows and everything worked fine. After installing windows and testing everything, I switched back to OS X and this time I tried to make another partition on my single portioned Mac volume and named it Backup. That too worked. Now I have three Volumes
1)Development2)Backup3)BootCamp.
Next when I switched to Windows, It should the classic error, No Bootable device found, please insert a Bootable CD and press any key. When I tried to enter my Mac OS X install DVD and by pressing option key, it does not show me the proper Mac OS X development volume. It keeps going back to the No bootable device found message.
Any help will be much appreciated
Regards
Mithun

you can't add a partition in between - you put Windows to a new partition number.
GPT (GUID)
EFI
Mac HFS
Lion Recovery
Windows
And now you have two HFS
One partition and one Windows (plus Lion Recovery).
If you were to have more, it can't be before Windows for one thing.

ConditionSortStep with measure based sorting

Hi,
i have problem with ConditionSortStep with measure based sorting.
I use this code :
Selection sel = query.findSelection(dimensionID);
OlapQDR qdr = new OlapQDR(measureDim.getUniqueID());
qdr.addDimMemberPair(dimTime.getUniqueID(),"YR2004");
qdr.addDimMemberPair(dimPartner.getUniqueID(),"PLUS");
ConditionSortStep stepM = new ConditionSortStep(dimensionID, sel.getHierarchy(), ConditionSortStep.MEASURE,ConditionSortStep.DESCENDING, measure.getUniqueID(), qdr);
SortSpec sortSpec = new SortSpec();
stepM.setAction(Step.ADD);
sortSpec.addConditionSortStep(stepM);
sel.setSortSpec(sortSpec);
query.applySelection(sel);
Members are sorted by measure, but only descending not in hierarchical ordering. When i change hierarchy in ConditionSortStep to (String)null, I get same result.
I mean, the specified hierarchy in ConditionSortStep is not used, but I dont know why. Any ideas?
BIBeans 9.0.4 - JSP
DB 9.2.0.5 + OlapB patch
Thanks...
maddox

Hi David,
Sorry for not providing proper information.
This is my Star Schema. Dim_cutomer, Dim_problem, Dim_geo, Fact_ticket.
Dim_cutomer: Contians information about the Cutomer, account, Install Date, Install flag
Dim_problem: Problem type, Problem group
Dim_Geo: is Geographical dimension. like Division, Region ...
Fact_ticket: Has the information about the each ticket.
The requirement is to create a report based on division, region : 1. count # of Open ticket 2. Count # of closed ticket 3. % of Failure
I am able to do count of Open and Close. but for % failure which is tricky and complecated. To calculate the % of failure
Failure = Count of (FAI tickets) / Count of Installs.
to count fai: there is flag in fact i can count the FAI, Installs : count of install falg which is in Dim_customer, i can count it in report. The problem is this report have prompts like Type of account, type of problem.
As per the client, when i change the value of problem type the count of Installs should not changed & when i change the value of Type of Account value of Installs should change based on type of account. I dont no how to control this.
As all the dim are joined with fact.
It will be great help if some one give some hit or help...
thanks in adavance
Regards
@li

Long runtime when Generate Org model with CRM_R3_ORG_GENERATE. never finish

Hi All,
I tried to generate org.model with CRM_R3_ORG_GENERATE.
But it ran for a long time. For a day and still not finished.
I killed it and did again. Same situation happen.
I see process is running and use almost CPU time.
Is this normal for this transaction? Can we tune it up?
Note that our R/3 sale structure is quite large. The system is used by global.
Thanks in advance for your advice
Pichet A.

I test extract list in CRM_R3_ORG_GENERATE to text file.
It size is 87MB.
Can I generate in background?

Can we create a analyses with measures as rows for comparision trend

I am working in OBIEE 11g.
Need to create a analyses with measures as rows and study their yearly progress in a single table
normally dimesions are used as rows and measures as columns but this one is slightly different ..tried using table and pivot but unable to show diff measures in single table
Something like this:
------------------------------------Yearly ------Prev year------change%
Shipped Qty ---------------------150----------100--------------50%
Delivered Qty---------------------150----------100--------------50%
Undelivered Qty-----------------150----------100--------------50%
Billed Qty---------------------------150----------100--------------50%
where shipped Qty , Delivered Qty , Billed Qty are the various measures
Please share your expertise in achieveing this
Would appreciate your help as its urgent
Regards
Pranati

Hi Pranati,
Create a Union report. You have one calculated column with just the text, eg.; 'Shipped Qty' and 3 columns with the 'Shipped Qty'-measures; Yearly ------Prev year------change%
Do the same for the other 3 Qty's
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

How to use Adaptive WebService Model with CAF WebService and Complex Type

Hi All,
I am trying to use the Adaptive Web Service Model and call a WebService generated by the CAF. The return type of the WebService is a Complex Type.. I receive an exception when trying to instantiate the Model Node.
Does anybody know how to use the Adpative Web Service Model with CAF WebServices and Complex Types as return type?
Help is appreciated..
Thanks, Johannes

Thanks Mukesh.
It is not possible to apply the Service Controller Template on Enterprise Java Bean Models as described in the Document. When I try to aply the template on the EJB Model, NWDS says: Only Webservice Models and RFC Models are supported...???
I did not find any information about how to return complex types in AWS.. in this document???
Is there such information available? Has anybody ever done that? There must be a way to do that.. Is is the standard approach, isn't it...? Please help me out there.. I need to get this running..
Thanks, Johannes

Advice/Recommendation please? How to best handle big models with various schemas?

Hi
Using DM 3.3.0.747.
We have several bespoke applications, each using its own data model in separate schemas. They do share various entities/tables which are made available in a shared schema. There are references to these shared tables, etc. (e.g. foreign keys)
We want to embark on a process to reverse engineer and then maintain these applications' schemas in Data Modeller.
I would really like your views on how to best approach this. The main concern is that the bigger the design (or more models/sub-views) the slower actions like saving and loading it becomes. Once you also have it version controlled more time is added onto saving and synchronising with the sub-version repository and between team members.
The thinking is to primarily have each application (and hence its own schema) in separate designs (projects), but include tables from the shared/core schema as needed. Would this be a good/recommended approach?
How does one address potential changes made (differences introduced) that may conflict between these separate designs?
e.g. in physical model the schema becomes a user that has permissions, etc. and that same user may be in multiple designs. Each design is version controlled, but in the end only exists once in the database. If each design is synch'ed with the database, DDL generated and executed, this can cause one design to add permissions, etc. that the second DDL from the second design removes or replaces with its own?
I hope my question/scenario is clear enough. If not, please revert to me for more clarification.
Thank you & Regards

Hi Hans,
I think it's better to use DM 4.0 and have everything in one design.
1) You can import all schemas you need into one design (one relational model). Save that design - important to do it before using "remote objects" approach
2) Use "Create new models based on schema names" wizard available in context menu for relational model in browser. Wizard will create new relational model for each schema in originating model and create there tables and views that
belong to that schema. All objects in originating model become read-only "remote objects".
If table (in new model) has a foreign key that refer table in another schema (now that table is moved to another new model) then "remote object" presentation is created for referred table.
At the end you'll have one large model with read-only remote objects and set of relational models that keep the track of foreign keys between tables in different schemas in database.
You can keep the originating model (the large one) in order to have global picture or delete it.
Properties from physical model are also transferred to new models in DM 4.0.
3) Check "Show 'Select relational models' dialog" in "Preferences>Data Modeler" - upon "open design" that will bring up dialog allowing to select which model to be loaded. The choice is persisted and
applied next time you open design (no need to see that dialog again if no change in what to be loaded).
4) For each model you can create "DDL generation" configuration (one or more) and exclude remote object from generation in DDL. Permissions should be maintained in model where table is editable and where DDL for that table will be generated.
The thinking is to primarily have each application (and hence its own schema) in separate designs (projects), but include tables from the shared/core schema as needed.
I won't recommend it. I know it's possible to have remote object in another design but you'll face following problems:
1) You cannot use design level domains and definitions in data types model
2) Remote object from another design are sensible to location of that remote design. You need to maintain the same directory structure everywhere designs (all related) are checked out and they need all to be checked out before dependent design to be open
3) You need to add remote objects manually while wizard described above will do it for you in the scope of one design
The main concern is that the bigger the design (or more models/sub-views) the slower actions like saving and loading it becomes.
The number of models shouldn't be a problem with support of "Select relational models" dialog. Subviews will impact loading if only they are large and are visible when "save" is used.
Total number of objects in model doesn't impact "save' operation - only modified objects are saved.
Yes, there is overhead for versioned designs - one more reason to move to DM 4.0 - SVN client 1.7 is used there.
Philip

LOAD VILLA MODEL WITH TEXTURES

HI FOR ALL
FIRST I HAVE A PROBLEM IN MY GRADUATION PROJECT I WANT TO LOAD A 3D VILLA MODELS WITH TEXTURES
I LOADED MODELS BUT TEXTURES DID NOT APPEAR PLEASE CAN ANY ONE HELP ME
SECOND I WANT TO PUT THE JAVA 3D APPLET ON A WEBSITE HOW CAN I PUT THE J3D APPLET IN HTML DOC ??

This is my appleT
{code */
public class OnAppletView extends Applet {
    public BranchGroup createSceneGraph(SimpleUniverse su) throws MalformedURLException {
//        String objUrl="";
//         Connection conn=null;
//          String UserName="root";
//          String Password="password";
//          String Url="jdbc:mysql://localhost/City";
//                ResultSet rs=null;
//                try
//          Class.forName("com.mysql.jdbc.Driver").newInstance();
//          conn=DriverManager.getConnection(Url,UserName,Password);
//          System.out.println("Database connection established");
//          Statement s=conn.createStatement();
//          s.executeQuery("select url from resources where obj1='villa' ");
//          rs=s.getResultSet();
//                if(rs!=null)
//              try
//              while(rs.next())
//                   objUrl=rs.getString(1);
//                        System.out.println("objjjj"+objUrl);
//          catch (Exception e) {
//                    // TODO: handle exception
//               e.printStackTrace();
//          s.close();
//          conn.close();
//          System.out.println("DB Connection terminated");
//          catch (Exception e) {
//               e.printStackTrace();
// Create the root of the branch graph
TransformGroup vpTrans = null;
BranchGroup objRoot = new BranchGroup();
ObjectFile f = new ObjectFile(ObjectFile.RESIZE | ObjectFile.TRIANGULATE | ObjectFile.STRIPIFY );
Scene s = null;
try {
// f.setBaseUrl( new URL("file:///"));
// s = f.load(new URL("file:///C:/Users/Mido/Desktop/ObjectLoader/villa1/villa1.obj"));
// f.setBaseUrl(new URL("file:///C:/Users/Mido/Desktop/OBJ-Models/Unterstand&Carport/"));
// s = f.load(new URL("file:///C:/Users/Mido/Desktop/OBJ-Models/house/casa1/casa1.obj"));
f.setBasePath("C:\\Users\\Mido\\Desktop\\NewVilla\\");
s = f.load("C:\\Users\\Mido\\Desktop\\NewVilla\\House02b.obj");
} catch (FileNotFoundException e) {
System.err.println(e);
System.exit(1);
} catch (ParsingErrorException e) {
System.err.println(e);
System.exit(1);
} catch (IncorrectFormatException e) {
System.err.println(e);
System.exit(1);
/// objRoot.addChild(s.getSceneGroup());
Vector3f translate = new Vector3f();
Transform3D T3D = new Transform3D();
TransformGroup TG = null;
SharedGroup share = new SharedGroup();
share.addChild(s.getSceneGroup());
float[][] position = {{0.0f, -0.1f, -3.0f},
{6.0f, -0.1f, 0.0f},
{6.0f, -0.1f, 6.0f},
{3.0f, -0.1f, -10.0f},
{13.0f, -0.1f, -30.0f},
{-13.0f, -0.1f, 30.0f},
{-13.0f, -0.1f, 23.0f},
{13.0f, -0.1f, 3.0f}};
for (int i = 0; i < position.length; i++) {
translate.set(position);
T3D.setTranslation(translate);
TG = new TransformGroup(T3D);
TG.addChild(new Link(share));
objRoot.addChild(TG);
vpTrans = su.getViewingPlatform().getViewPlatformTransform();
translate.set(0.0f, 0.3f, 0.0f);
T3D.setTranslation(translate);
vpTrans.setTransform(T3D);
KeyNavigatorBehavior keyNavBeh = new KeyNavigatorBehavior(vpTrans);
keyNavBeh.setSchedulingBounds(new BoundingSphere(new Point3d(), 1000.0));
objRoot.addChild(keyNavBeh);
objRoot.compile();
return objRoot;
} // end of CreateSceneGraph method of KeyNavigatorApp
public void init() {
// TODO start asynchronous download of heavy resources
setLayout(new BorderLayout());
GraphicsConfiguration config =
SimpleUniverse.getPreferredConfiguration();
Canvas3D canvas3D = new Canvas3D(config);
add("Center", canvas3D);
// SimpleUniverse is a Convenience Utility class
SimpleUniverse simpleU = new SimpleUniverse(canvas3D);
BranchGroup scene=null;
try {
scene = createSceneGraph(simpleU);
} catch (MalformedURLException ex) {
Logger.getLogger(OnAppletView.class.getName()).log(Level.SEVERE, null, ex);
// LIGHT
AmbientLight ambientLight = new AmbientLight(new Color3f(Color.black));
ambientLight.setInfluencingBounds(new BoundingSphere(new Point3d(), 100.0));
DirectionalLight directionalLight = new DirectionalLight(new Color3f(Color.WHITE), new Vector3f(0.0f, 0.0f, -1.0f));
directionalLight.setInfluencingBounds(new BoundingSphere(new Point3d(), 100.0));
BranchGroup lightingBG = new BranchGroup();
lightingBG.addChild(ambientLight);
lightingBG.addChild(directionalLight);
PlatformGeometry platformGeometry = new PlatformGeometry();
platformGeometry.addChild(lightingBG);
simpleU.getViewingPlatform().setPlatformGeometry(platformGeometry);
//END OF LIGHT
// This will move the ViewPlatform back a bit so the
// objects in the scene can be viewed.
simpleU.getViewingPlatform().setNominalViewingTransform();
// TO INTERACT WITH MOUSE
// OrbitBehavior orbitBehavior = new OrbitBehavior(canvas3D , OrbitBehavior.REVERSE_ALL);
// orbitBehavior.setBoundsAutoCompute(true);
// orbitBehavior.setSchedulingBounds(new BoundingSphere(new Point3d() , 100.0));
// simpleU.getViewingPlatform().setViewPlatformBehavior(orbitBehavior);
simpleU.addBranchGraph(scene);
// TODO overwrite start(), stop() and destroy() methods
i wanT To implemenT a collision detection to prevent the viewer to walk through the wall what can i do ? there is a class ??

Publish subscribe model with plsql

Hi,
I did not find any sample that shows how to use the publish subscribe model with plsql.
Enqueueing is possible and know how to do it, but how can I subscribe to a topic with plsql.
All samples I found are for Java JMS.
Thanks
Günther

Hello,
I have assumed you are using 10.2
There are examples in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14257/toc.htm
about using multi-consumer queues/topics. There are demos in $ORACLE_HOME/rdbms/demo if you have installed the companion cd.
Thanks
Peter

Rendering issue on Samsung S4 (specific models) with AIR app

We have an Android/IOS app compiled with AIR 3.9. It works fine for all devices but some specific models of Samsung S4. First let me describe the device models & compilation details, as below:
> Issue found on devices (given models only, on other S4(s) works fine):
     - Samsung Galaxy S4 (Model No. SGH-M919)
     - Samsung Galaxy S4 (Model No. SCH-I545)
> Compilation:
     - AIR 3.9 (also with 3.8)
     - Render Mode GPU
     - Bitmap graphcis
> Problem:
There problem is with redering of grpahics speically which are masked. Either those masked graphcis doesn't display at all OR display in wrong layer (also distracted) when Display List realted to that object is manipaulated i.e. A child object is added to the parent of masked object & the masked object appears above it which was previously not visible. Some masked obejcts are not displayed at all.
> Observation:
It was same with CPU mode rendering however when the render mode is changed to AUTO the issue is resovled. But then app is preforming too slow as it uses all bitmap graphcis.
It seems the specfic S4 models are using different type of GPU, though it should not create such weird issue. Can anybody suggest possible solution for this? OR have faced sismilar behavior on said devices ?

Hi Omi,
Thanks for your reply for issue “Rendering issue on Samsung S4 (specific models) with AIR app”. My adobe account is [email protected]<mailto:[email protected]>, you can send your simple app to me by this account, now we are working on it.
Thanks
-Bo
发件人: grosssmutttr [email protected]
发送时间: 2013年12月28日 18:52
收件人: Bo Tang
主题: Rendering issue on Samsung S4 (specific models) with AIR app
Re: Rendering issue on Samsung S4 (specific models) with AIR app
created by grosssmutttr<http://forums.adobe.com/people/grosssmutttr> in AIR Development - View the full discussion<http://forums.adobe.com/message/5961441#5961441

LRS Model with measure

Similar Messages

Maybe you are looking for