LRT224 Support for multiple subnets

I am considering purchasing an LRT224, but need help with one thing.
The network I manage has about 200 devices currently, with mixed brands and types of switches, access points, etc, scattered about. It is a small school that has had many different people running IT at it, some not so good, others better. Now I manage it.
We would like to add more devices, but currently we are limited to 254 devices. In the LRT224 manual, it -looks- like you can manually specify the subnet mask, and DHCP server range. For example, could I change the subnet mask to 255.255.252.0, or a /22 subnet, and then specify the DHCP range to be, for example only, 192.168.1.2 through 192.168.4.254, for 1024 total addresses? I want to do this without using VLANs, because I'm unsure if any of out switches support VLAN tagging, and I have zero experience with VLANs.
Please let me know, thanks!
Solved!
Go to Solution.

For site-to-site IPsec VPN tunnels, LRT224 supports subnet masks larger than 255.255.255.0. However the local subnets on the LAN side of LRT224 are limited to a class C subnet per VLAN.

Similar Messages

Feature request: Support for Multiple Libraries (like in iMovie)

From the threads, I can tell this topic was raised by many for many years. I would like to propose support for multiple iPhoto libraries -- or more specifically, the ability to distribute media across different storage devices.
There is a huge gap between my spacially limited MBP 250 GB SSD and my external 4 TB HDD. I am aware that I can juggle two separate libraries in iPhoto but it's just not practical and the moving of media between the libraries is not a simple drag and drop effort but involves exporting and importing with me having to clean up on one side or the other.
iMovie has had support for several libraries for a long time presumably because the sheer size of media in the video realm gave the iMovie team little choice.
I can't be the only one having this itch, right?

Again, you need to clarify your terms
Aperture can move master photos files around. With Aperture you can write additional metadata to the original file.
You don't need multiple libraries to thematically arrange photos, though. A simple keywordign system will do that.
So in Aperture I don't have to restart into different libraries?
You can have all your photos in a sinble library with the master files stored off-disk easily. You can relocate them from disk to disk too. However, if you;re doing presentations that is probably not necessary if you generate good quality previews. I'd ask about these things on the Aperture forum for more.

Support for multiple libraries...?

Hi, I have a question as how is the best way to manage y music libraries given my usage scenario.
First let me set the context of what I have. I have over 35GB of ripped music, that resides in an external drive. Currently this music is available through my iTunes application, but it is NOT part of my lybrary (meaning I imported but did NOT copy it into the library). I do NOT want to have 35GB of music in my notebook's HD.
My iTunes library is in my local HD (music folder). This is a small file that basically has the 'podcasts' and the 'artwork'.
What do I want? I would love to keep all my music and videos on the external drive, and have my podcasts in my local HD. This way when I am on the road, I can update the podcasts, without having to carry with me all my music.
This all works fine the way I have it now, except that every time I rip a new CD or buy music from the iTunes Store, they go to my local HD and not my external drive.
Any ideas on how to work this out? I would love support for multiple libraries, but I don't thnks it's possible as far as I looked into it.
Thanks SO much!

This all works fine the way I have it now, except that every time I rip a new CD or buy music from the iTunes Store, they go to my local HD and not my external drive.
Set the 'iTunes Music folder location' (Preferences>Advanced>General) to the music folder on your external.
The next time you rip a CD or purchase music, it will be stored there.
Note: the 'iTunes Music folder location' is not the folder where your music is, but the location where iTunes stores imported music (and added music when 'Copy files to.....' is checked)
If you ran iTunes once with your external drive not attached/mounted, this location is reset to the internal drive.
iTunes 7 has support for multiple libraries. Press and hold the Option-key on launching iTunes until a window pops up which asks you to choose a library or create a new one.
Libra and iTunes Library Manager both work with iTunes 7 and older versions. They also save the preferences for every library you created.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.8) iTunes 7.0.1

[svn] 4875: Adding support for multiple @productversion tags

Revision: 4875
Author: [email protected]
Date: 2009-02-06 08:31:48 -0800 (Fri, 06 Feb 2009)
Log Message:
Adding support for multiple @productversion tags
QE Notes: None.
Doc Notes: None
Bugs: SDK-19104
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19104
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java

Revision: 4875
Author: [email protected]
Date: 2009-02-06 08:31:48 -0800 (Fri, 06 Feb 2009)
Log Message:
Adding support for multiple @productversion tags
QE Notes: None.
Doc Notes: None
Bugs: SDK-19104
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19104
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java

[svn] 4146: adding support for multiple @playerversion tags.

Revision: 4146
Author: [email protected]
Date: 2008-11-19 21:37:23 -0800 (Wed, 19 Nov 2008)
Log Message:
adding support for multiple @playerversion tags.
Fix for asdoc.exe not outputting information for the @langversion tag.
Also removing some unused code from DITA generation..
QE Notes: None
Doc Notes: None
Bugs: SDK-18158, SDK-18159
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18158
http://bugs.adobe.com/jira/browse/SDK-18159
Modified Paths:
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Revision: 4146
Author: [email protected]
Date: 2008-11-19 21:37:23 -0800 (Wed, 19 Nov 2008)
Log Message:
adding support for multiple @playerversion tags.
Fix for asdoc.exe not outputting information for the @langversion tag.
Also removing some unused code from DITA generation..
QE Notes: None
Doc Notes: None
Bugs: SDK-18158, SDK-18159
tests: checkintests, asdoc
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18158
http://bugs.adobe.com/jira/browse/SDK-18159
Modified Paths:
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/DocComment.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Support for multiple email addresses in struts

Hi,
I need an example source jsp in struts which contains support for multiple email addresses (dynamic)
Can I have source for this?
Thanks

I'm sorry, I don't understand what you mean - do you want to display multiple email addresses on a page?

RV320: Need to use as gateway for multiple subnets

We just purchased an RV320 as a replacement/upgrade to an RV042. Our Internet connection was upgraded to 200Mbps and the RV042 wouldn't handle that throughput.
Our internal network has 4 subnets, all connected via a layer 3 switch. The RV320 is connected to one of those subnets and is the default gateway for the entire network.
The RV042 had a "multiple subnets" setting that allowed it to perform NAT for the directly connected subnet and the other 3 subnets in our network. We would just add the other networks to the list in the RV042 and everything was fine.
The RV320 doesn't seem to have the same functionality (or am I missing something?). It looks like there is some sort of multiple subnet support, but when we try to add another subnet the interface seems to be asking us to define a single IP address in that subnet (an IP address for the router?) as if all subnets will be directly attached to the router using VLANs (which is not the case in our network).
We can set up the "advanced routing" option to define the other 3 internal subnets and how to route to them, etc. but will the RV320 perform NAT for the other subnets without any adidtional configuration?
Can anyone shed any light on this?
Many thanks!

Precept,
My name is Ismael, iam with Small Business Support Center. I like to start by asking is there a particular reason that the switch is handling Layer 3/or DHCP? Normally when an RV042 is implemented you would need a Layer 3 switch as the RV042 only supports one DHCP scope.In addition all The RV0XX series does not support 802.1q VLAN.
With RV320 you can setup multiple subnets under advance routing and still allow for it to pass DHCP for all of your 4 subnets and create 801.2q Vlan subinterfaces . Setting RV320 in this manner can create an ease in managing the network.
If you are considering the RV320 to do Layer 3 / DHCP simply create your 4 Vlans or subnets. Add them to the DHCP scope and enable DHCP server for all subnets. Switch would have to be configured to Layer 2 for this to work. The link below is a knowledge portal that could assist in creating DHCP and Vlans. Hope this helps you.
http://sbkb.cisco.com/

ASA Transparent Mode For Multiple Subnets

I am looking to replace a FortiGate firewall which is currently working in transparent mode handling mutiple subnets with ASA 5515. Currently, I am testing transparent mode configuration on ASA 5505, and it will not forward any traffic that is not in the same subnet as IP address assigned to BV interface.
For example, the following configuration works.
10.0.0.3/24 (computer) ---> 10.0.0.2/24 (firewall) ---> 10.0.0.1/24 (computer)
However, the following does not work
10.0.0.3/24 (computer) ---> 10.10.0.2/24 (firewall) ---> 10.0.0.1/24 (computer)
I thought that transparent mode is just a bump in the wire, so why does the IP address/subnet assigned to BV interface affects the traffic? Is the ASA capable of handling other/multiple subnets in transparent mode other than the subnet assigned to BV interface?
By the way, I used to run PIX 515E 7.2(2) transparent mode filtering multiple subnets. The current ASA 5505 is on 9.0(1). Is it the limitation on the ASA 5505 model but not on the more powerful ASA model?
Thank you

Thank you @ttemirgaliyev, I tried but multiple context is not supported by ASA 5505.
I have an example of PIX configuration in transparent mode filtering multiple subnets. I was using this configuration in production environment in the past. I am wondering if ASA 5510 or higher can handle this setup.
: Saved
: Written by enable_15 at 10:57:25.766 UTC Wed Jul 16 xxxx
PIX Version 7.2(2)
firewall transparent
hostname pixfirewall
enable password xxxxxxxxxx encrypted
names
interface Ethernet0
nameif outside
security-level 0
interface Ethernet0.1
vlan 1
no nameif
no security-level
interface Ethernet1
nameif inside
security-level 100
interface Ethernet1.1
no vlan
no nameif
no security-level
passwd xxxxxxxxxx encrypted
ftp mode passive
access-list outside extended permit udp any host 10.0.0.210
access-list outside extended permit udp any host 10.0.0.3
access-list outside extended permit tcp any host 10.0.0.110 eq smtp
access-list outside extended permit tcp any host 10.0.0.110 eq www
access-list outside extended permit tcp any host 10.0.0.57 eq smtp
access-list outside extended permit tcp any host 10.0.0.57 eq www
access-list outside extended permit tcp any host 10.0.0.75 eq www
access-list outside extended permit tcp any host 10.0.0.75 eq ftp
access-list outside extended permit tcp any host 10.0.0.75 eq 5003
access-list outside extended permit tcp any host 10.0.0.75 eq 403
access-list outside extended permit tcp any host 10.0.0.75 eq 407
access-list outside extended permit tcp any host 10.0.0.76 eq ftp
access-list outside extended permit tcp any host 10.0.0.2 eq pcanywhere-data
access-list outside extended permit udp any host 10.0.0.2 eq pcanywhere-status
access-list outside extended permit tcp any host 10.0.10.61
access-list outside extended permit tcp any host 10.0.10.62
access-list outside extended permit tcp any host 10.0.10.63
access-list outside extended permit tcp any host 10.0.10.64
access-list outside extended permit tcp any host 10.0.13.225 eq ftp
access-list outside extended permit tcp host 192.168.4.30 host 10.0.17.254 eq telnet
access-list outside extended permit tcp any host 10.0.13.225 eq telnet
access-list outside extended permit tcp any host 10.0.10.61 eq 50
access-list outside extended permit udp any host 10.0.10.61 eq isakmp
access-list outside extended permit tcp any host 10.0.10.62 eq 50
access-list outside extended permit udp any host 10.0.10.62 eq isakmp
access-list outside extended permit tcp any host 10.0.10.63 eq 50
access-list outside extended permit udp any host 10.0.10.63 eq isakmp
access-list outside extended permit tcp any host 10.0.10.64 eq 50
access-list outside extended permit udp any host 10.0.10.64 eq isakmp
access-list outside extended permit tcp any host 10.0.0.219
access-list outside extended permit udp any host 10.0.0.219
access-list outside extended permit udp any host 10.0.10.61
access-list outside extended permit udp any host 10.0.10.62
access-list outside extended permit udp any host 10.0.10.63
access-list outside extended permit udp any host 10.0.10.64
access-list outside extended permit icmp any host 10.0.10.29
access-list outside extended permit tcp any host 10.0.10.29 eq ftp
access-list outside extended permit tcp any gt 1023 host 10.0.10.29 eq ftp-data
access-list outside extended permit tcp any host 10.0.0.110 eq pop3
access-list outside extended permit tcp any host 10.0.0.57 eq pop3
access-list outside extended permit tcp any host 10.0.10.27 eq pcanywhere-data
access-list outside extended permit udp any host 10.0.10.27 eq pcanywhere-status
access-list outside extended permit tcp any host 10.0.10.31 eq pcanywhere-data
access-list outside extended permit udp any host 10.0.10.31 eq pcanywhere-status
access-list outside extended permit tcp any host 10.0.0.222 eq pcanywhere-data
access-list outside extended permit udp any host 10.0.0.222 eq pcanywhere-status
access-list outside extended permit icmp any host 10.0.10.28
access-list outside extended permit tcp any host 10.0.10.28 eq pptp
access-list outside extended permit gre any host 10.0.10.28
access-list outside extended permit ip any host 10.0.10.28
access-list outside extended permit ip any host 10.0.10.29
access-list outside extended permit tcp any host 10.0.10.25 eq 8234
access-list outside extended permit tcp any host 10.0.17.217 eq 8234
access-list outside extended permit tcp any host 10.0.17.217 eq 8235
access-list outside extended permit tcp any host 10.0.17.217 eq www
access-list outside extended permit ip any host 10.0.10.36
access-list outside extended permit ip any host 10.0.10.37
access-list outside extended permit ip any host 10.0.10.38
access-list outside extended permit ip any host 10.0.10.39
access-list outside extended permit ip any host 10.0.10.40
access-list outside extended permit ip any host 10.0.10.41
access-list outside extended permit tcp any host 10.0.0.235 eq www
access-list outside extended permit tcp any host 10.0.10.2 eq www
access-list outside extended permit tcp any host 10.0.10.2 eq 3389
access-list outside extended permit tcp host 192.168.1.234 host 10.0.0.211 eq 4899
access-list outside extended permit tcp any host 10.0.0.211 eq www
access-list outside extended permit tcp any host 10.0.10.35 eq www
access-list outside extended permit tcp any host 10.0.10.36 eq www
access-list outside extended permit tcp any host 10.0.10.37 eq www
access-list outside extended permit tcp any host 10.0.10.38 eq www
access-list outside extended permit tcp any host 10.0.10.39 eq www
access-list outside extended permit tcp any host 10.0.10.40 eq www
access-list outside extended permit tcp any host 10.0.10.41 eq www
access-list outside extended permit tcp any host 10.0.0.110 eq https
access-list outside extended permit tcp any host 10.0.0.57 eq https
access-list outside extended permit tcp any host 10.0.0.75 eq https
access-list outside extended permit tcp any host 10.0.17.217 eq https
access-list outside extended permit tcp any host 10.0.0.234 eq 220
access-list outside extended permit tcp any host 10.0.0.235 eq https
access-list outside extended permit tcp any host 10.0.10.2 eq https
access-list outside extended permit tcp any host 10.0.0.211 eq https
access-list outside extended permit tcp any host 10.0.10.35 eq https
access-list outside extended permit tcp any host 10.0.10.36 eq https
access-list outside extended permit tcp any host 10.0.10.37 eq https
access-list outside extended permit tcp any host 10.0.10.38 eq https
access-list outside extended permit tcp any host 10.0.10.39 eq https
access-list outside extended permit tcp any host 10.0.10.40 eq https
access-list outside extended permit tcp any host 10.0.10.41 eq https
access-list outside extended permit tcp any host 10.0.10.35 eq 8234
access-list outside extended permit tcp any host 10.0.10.36 eq 8234
access-list outside extended permit tcp any host 10.0.10.37 eq 8234
access-list outside extended permit tcp any host 10.0.10.38 eq 8234
access-list outside extended permit tcp any host 10.0.10.39 eq 8234
access-list outside extended permit tcp any host 10.0.10.40 eq 8234
access-list outside extended permit tcp any host 10.0.10.41 eq 8234
access-list outside extended permit tcp any host 10.0.10.35 eq 8235
access-list outside extended permit tcp any host 10.0.10.36 eq 8235
access-list outside extended permit tcp any host 10.0.10.37 eq 8235
access-list outside extended permit tcp any host 10.0.10.38 eq 8235
access-list outside extended permit tcp any host 10.0.10.39 eq 8235
access-list outside extended permit tcp any host 10.0.10.40 eq 8235
access-list outside extended permit tcp any host 10.0.10.41 eq 8235
access-list outside extended permit udp any host 10.0.0.222
access-list outside extended permit gre any any
access-list outside extended permit ip host 10.0.10.28 any
access-list outside extended permit ip host 10.0.0.211 any
access-list outside extended permit ip host 10.0.10.35 any
access-list outside extended permit ip host 10.0.10.36 any
access-list outside extended permit ip host 10.0.10.37 any
access-list outside extended permit ip host 10.0.10.38 any
access-list outside extended permit ip host 10.0.10.39 any
access-list outside extended permit ip host 10.0.10.40 any
access-list outside extended permit ip host 10.0.10.41 any
access-list outside extended permit ip host 10.0.0.222 any
access-list outside extended permit ip host 10.0.0.234 any
access-list outside extended permit icmp host 10.0.0.234 any
access-list outside extended permit tcp any host 10.0.0.235 eq 3389
access-list outside extended permit ip host 10.0.0.254 any
access-list outside extended permit tcp any host 10.0.0.2 eq 3389
access-list outside extended permit tcp any host 10.0.13.240 eq 5900
access-list outside extended permit udp any host 10.0.13.240 eq 5900
access-list outside extended permit tcp any host 10.0.13.240 eq 3283
access-list outside extended permit udp any host 10.0.13.240 eq 3283
access-list outside extended permit tcp any host 10.0.13.240 eq ssh
access-list outside extended permit tcp any host 10.0.10.12 eq www
access-list outside extended permit tcp any host 10.0.0.212 eq www
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 10.0.0.230 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
snmp-server host inside 10.0.0.234 community xxxx
no snmp-server location
no snmp-server contact
snmp-server community xxxx
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
console timeout 0
prompt hostname context
Cryptochecksum:c887f562a196123a335c5ebeba0ad482
: end

Support for Multiple Hierarchies defined for the same GL Segment

Hi,
In our eBS setup, we have multiple hierarchies defined for a GL Segment.
OOTB, BI Apps 7.9.6.3 provides support for 10 Segments, and it's corresponding Hierarchies (1 Hierarchy for each Segment).
My question here is whether OOTB BI Apps 7.9.6.3 supports Multiple Hierarchies for the same Segment?+
Thanks,
Ab

no it is not supported OOTB as of today
you need to customize ETL mappings and OBIEE metadata to include hierarchy identifiers from the EBS segment definitions.
Then you have to consider that filtering a hierarchy identifier becomes mandatory during query execution to avoid aggregation of duplicated values.

Mailman v3 implementation of support for multiple domains

Mailman has evolved to support listserve names for multiple domains (think VH for listserves). At what point can we see Apple roll this kind of management into the existing product? It would be fabulous to give VH clients the ability to have their own 'branded' listserve experience rather than one with our default domains
Server Group -- please update Mailman when more pressing bug fixes are out of your way. Thank you!

Alex,
Thanks. I know that it can be done via the CLI, but once again we see where alterations done in the CLI will immediately require abandoning the SA as an admin tool. We're trying to encourage Apple to not create this paradox, or rather, to evolve the GUI admin toolset. I was recently at a Leopard Server tour seminar where the field engineer and I discussed this very feature. His comment to me was essentially 'many of the tools in the Server are based on open source projects, so you can simply download the latest update, compile it and configure it for the server ... but you won't be able to use the admin tools we provide." He's accurate, and if I was the only one admin'ing my machines, that might be a temporary solution to this particular small issue. But it immediately brings to mind the reflex question of 'so why did I buy Leopard server?
This is a matter of Apple needing to provide sufficient resources to the Server group to grow the product. Whether that means some new hiring, or not pulling engineers off for other product lines, or a different management paradigm. We shouldn't purchase a server product that is touted as an enterprise-class solution when it may only have a bare framework for the offered toolsets. If growing the toolset to match what is already offered in the open source world (for that particular product) requires abandoning the server tools, then there's a bit of a vision problem with the Server product.
Sorry, -- I didn't mean to get on a soap box. You and I are here to learn and help others. I know you aren't part of Apple any more than I am. I do hope Apple engineers are given some time to peruse this board and mine it for ideas, or gauge the effectiveness of their solutions based on the questions and solutions posed here.
With Mailman 3 so far along in development (VH support was added in October), is Apple culling the very best from it for their user base (and adjusting the SA toolset accordingly)?

SCUP 2011 support for multiple SCUP console users

Will Microsoft or does microsoft have a solution to allow for multiple users to upload catalogs and install and use the SCUP 2011 console on workstations? Will SCUP 2011 database support multiple users now or in the future and is it supported? thank you

I cannot speak to what may lie in the future, but this is what we do to have multiple users in the console. We are just now starting to evaluate SCUP, and this works for a handful of users so far.
Install WSUS admin console
Install SCUP 2011
Copy Scup2011.exe.config to
c:\Program Files (x86)\System Center Updates Publisher 2011
Open SCUP console and verify in File-> Options that ConfigMgr Server settings are correct
Verify Advanced settings are correct as well
Daniel Ratliff | http://www.PotentEngineer.com

Still no support for multiple users!!

The only reason I recently updated to 5.0 is I was anxiously awaiting the addition of multi-user support to my Lenovo A10-70 tablet. I had bought it for my young daughter after she broke the screen on her Nexus. Well, without support for User Accounts, this tablet is useless to a parent. I cannot believe a large company like Lenovo does not offer this with its Android tablets! Mark, Cleo, Serene, Lenovo admins - I hope you are reading this. I am also posting this on Amazon where I bought my tablet. Such a shame - great hardware but such poor software choices. P.S. Major issues with the new update to Android 5.0. WiFi does not stay connected. Many Google apps will not run, including Gmail!

Multi-user support is not common in tablets - so far, the ONLY tablet I have found with solid multi-user support is the Galaxy Tab/Note 4 (and even it has issues if you mis-configure it). (Why do I refer to the Tab/Note 4? Yes - the Note 4 is a phablet, and is typically sold via providers AND has a taller resolution than the Tab 4; those are, in fact, the ONLY differences between the Tab 4 and Note 4. They have common features otherwise, and even their updates are released simultaneously.) Lenovo even did the same thing with the A-series - compare their phablet models (G, GV, and H) with their wireless-only F models - you'll find so many commonalities it's not funny. It's the phablets that are getting all the update love (especially when it comes to Lollipop); tablets (F subseries), not so much.Also, phablets are huge in Asia and India (look at sales of the G, GV, and H - the forums HERE are also rather obvious in those reporting successful updates - they are all from Asia or India); Lenovo doesn't push phablets in Europe or North America. (I have no idea whether it is provider resistance or not.) If you want solid multi-user support as a parent, look to Samsung (simply because they actually implemented it properly, which most tablet OEMs aren't going to be bothered with - it's not a knock specifically on Lenovo, because it's not specifically a Lenovo issue). On the Lollipop update issue; how many of us are still soldiering on with the same amount of storage that our tablets came with? (I'm referring mainly to us F-subseries folks.) The thing about the F subseries is that they all have small - if not downright miniscule - amounts of usable eMMC storage; out of the 8GB of eMMC storage the device has, only half that - 4GB - is usable from the start. And every app you install, and assorted things that go along with it, eats into that. Look at the size of the UPDATES that are being reported; S000023 alone is nearly 200MB. The big combo updates - and if you're coming merely from S000020, which is the North American starting place for the F - you're talking nearly a gigabyte just to get to S000027 - do you have that much usable storage? We may well have to bite the bullet and install medium or large (16GB/32GB) microSD cards in our tablets just because of the update-size issue. (It's not like 16GB microSD cards are all that expensive, even retail - I see them at the local Best Buy for - at worst - $15 for SanDIsk Ultra - that's the high end brand of microSD card.) We may be getting those "you have the latest version" due to available-space constraints - I've seen it happen on space-coinstrained WINDOWS PCs often enough.

Supposed support for Multiple Libraries in iTunes 7

Come on Apple, your website says iTunes 7 supports multiple libraries in multiple locations, yet there is no way to enable a second library or create additional libraries through iTunes. Is this just hype about the tedious manual workaround of not having iTunes copy everything to one location? When will we get true multiple libraries? This is sorely missing functionality for anyone with a harddrive smaller than 250GB.
Quoted from http://www.apple.com/itunes/overview/
"Multiple Libraries
Build your collection over multiple libraries, and keep them on different hard drives to save space."

I think there are a large number of us who are in the "for some reason" category: we want to have our libraries split across multiple HD's.
Here's my exact scenario:
I have a small portion of my library stored locally on my PowerBook for when I am on the road (~30GB). I have the bulk of my music collection stored on an external drive at home (~160GB). I have another set of tracks that are works in progress that my band is in the process of writing/recording, stored on a 2nd external drive at our studio (~10GB). I want to be able to plug in any of the external drives, and have access to that content whenever I am at home or at the studio, without having to change the local library stored on my PowerBook.
Consolidating the library does not help at all in this scenario - not only does the complete library not fit on my PB's hard drive, but I also don't want the reverse, which is to consolidate to one external drive which I'd then have to carry around everywhere. iTunes should be smart enough to recognize different library files concurrently, and store the import/organize settings per library. I guess that's too much to ask...

AIA support for multiple brands implemented in multiple instances of Siebel

Good Day!
I would like to ask whether AIA has the capability to support multiple brands in terms of multiple instances of Siebel and BRM.
I have a client wherein they have a scenario of:
1.) To launch 4 different brands which contain multiple services and it has been decided that anything that holds customer specific data should be all in a separate instance (which would cover SIEBEL, BRM etc.)
2.) It is also a plan to have systems which only contain transactional data (mainly transient information) to have a central deployment platform (This would typically include OSM and AIA)
I've heard that this is possible with AIA but with heavy customization is required to be done. In case for customization, are there any white paper / documentation which talks about this?
So to summarize, here are the key questions:
-- Support of AIA to integrate multiple instances of Siebel, multiple instances of OBRM and single instance of OSM
-- Does AIA PIPS (mainly O2C, AABC) support data models (account, subscription, etc.,) of different services like 2G, 3G, LTE and Enterprise
-- Does AIA support more than 2 level hierarchies
-- Does AIA support charge redirection within the hierarchy
-- Does AIA PIPS support different MACD scenarios like suspend, resume, account movement within & across hierarchies especially for Enterprise Services?
Regards,
Jeff

First off - Have no knowledge of ERPi - Just googled it.
If its any help, we have multiple instances of EBS on the same box, we have seperate DWH (and ODI Work / Master Repos) environments aligned to these instances. An ODI Agent can only communicate with one ODI Work repository, hence we have Multiple Agents so we can use the EBIZ -> DWH pairs simultaneasouly.
Maybe someone will come along and tell us how it could work differently, until then - its works for us!

Support for Multiple Multi-Touch Screens

hello,
I have written some code that implements the multi-touch and it has been working fine with just one multi-touch screen. However, someone using my program with 2 multi-touch screens hooked up is getting no input from the second device. I did not
see anything documentation referring to more than one multi-touch device, although the existence of hSource in the TOUCHINPUT structure would imply multiple devices are supported. After searching the forums, I found this post
http://social.msdn.microsoft.com/Forums/en-US/tabletandtouch/thread/9c11871d-945c-4f7b-bdaa-a1b1452959b8/
in which someone stated that 2 multi-touch monitors should work fine, but not with simultaneous input. Since the post is almost 2 years old, I am wondering if anything has changed, and whether this might be the problem my user is having. Or is
there some way to tell if it is a driver issue? I am not using the gesture library, just retrieving data with GetTouchInputInfo. I'll appreciate if anybody can point me to documentation or mention their experiences with multiple devices.
thank you.

thank you for your quick reply. I have gotten a few more details and the problem is not the scenario you suspected. They are using 1 window spanning 2 multi-touch monitors. The problem does seem to be related to simultaneous input. If
they have a finger down on the first monitor, my program does not receive any events from the second monitor. If they are not pressing down on the first monitor, the input from the second monitor comes through.
Does Windows 7 support simultaneous input from 2 or more multi-touch monitors? Is there something I have to do so that my program will work correctly? Or are there driver specific issues, and if so, where can I get help for that?
thank you.

LRT224 Support for multiple subnets

Similar Messages

Maybe you are looking for