LSC no System Update option

Suddenly, LSC 2.3.002 doesn't provide the option for checking for Lenovo System Updates. Instead the app displays : To update the Lenovo software in your machine you must go to Lenovo's website to search for updates.
Until a week back the option was there.

Update
Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/a12310c6040505d18fbb03256ceb7 0de.jpg

Similar Messages

My ipod touch 4th Gen doesn't give "System update" option in General settings, how can i fix it?

My gf gave me her old ipod touch. the 4th gen one with the front facing camera, the version is 4.3.3 and I'm trying to update it, but when I go into "general" and right under the "about" option it should give me the "system update" option but it doesn't, is there a reason for that?

That option won’t appear in iOS versions prior to 5.0; update it from iTunes on a computer as described at the bottom of this article. It can only be updated directly to the newest iOS release supported by the device’s hardware.
The maximum iOS version for the fourth generation iPod touch and iPhone 3GS is 6.1.6.
(111495)

HT4623 What If I don't see the system update option on my ipod

I am trying to get skype but I need iOS 4.3 and I tried to update but the option software update is not in my setting how else can I update? Hello please

To update
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 3.1.3
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models
I suspect you have the 2G iPOd.
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.

No update option for S90-u?

I got the S90-u 1GB model a few weeks ago. There is no system update option in about phone nor anywhere else. Even the lenovo companion app says no system upgrade software.
Tried updating with lenovo smart assistant but update fails on the phone.
My phone is not rooted and had the Google play store preinstalled.

Welcome to the Apple Support Communities
This option appears when you are using iOS 5 or later. The latest version for the iPhone 4 is 6.0.1, so see > http://support.apple.com/kb/HT4972?viewlocale=en_US&locale=en_US
After updating, you will be able to update the device on Settings > General > Software Update

HT4623 I'm trying to download ios5 to my iPad and I tried following the steps but in my setting under general there is no software update option. What do I do

I'm trying to download the ios5 to my iPad and I was following the instructions on here but when I go to settings and general I don't have a system update option. What do I do

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                      iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                      iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1
iPad 3                                          iOS 6.1
iPad 4                                          iOS 6.1
iPad Mini                                     iOS 6.1
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Where is the option for system updates in the update center

Hi, I want to check if lollipop is available for my phone. So I went to software updates in the About Phone section, but I don't see the option to check for system updates. Why?
My Z3 compact
Android version: 4.4.4
Build number: 23.0.1.A.5.77
Solved!
Go to Solution.

@poorav Could you send me a private message with the IMEI-number of your Z3 Compact and I can look closer into this:
http://support.sonymobile.com/global-en/xperiaz3compact/userguide/IMEI-number/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My ipad won't give me the option to upgrade from op system 5.1.1 to higher as the update option say's I'm up to date.

My ipad won't give me the option to upgrade from op system 5.1.1 to higher as the update option say's I'm up to date.

A first generation iPad can't be updated past 5.1.1.
(119512)

API for inserting/updating system profile option values

Hi,
Is there any API that I can use to insert/update system profile option values via PL/SQL?
Regards,
Santhosh Jose

Hi Santosh,
You can think of using the FNDLOAD utility to download the values from one instance and upload to other instance.
## Now lets have a look at the profile option using oracle's FNDLOAD
FNDLOAD apps/$CLIENT_APPS_PWD O Y DOWNLOAD $FND_TOP/patch/115/import/afscprof.lct POR_ENABLE_REQ_HEADER_CUST.ldt PROFILE PROFILE_NAME="POR_ENABLE_REQ_HEADER_CUST" APPLICATION_SHORT_NAME="ICX"
## Note that
## POR_ENABLE_REQ_HEADER_CUST is the short name of profile option
## We aren't passing the user profile option name in this case. Validate using ...
########----->select application_id, PROFILE_OPTION_NAME || '==>' || profile_option_id || '==>' ||
########----->USER_PROFILE_OPTION_NAME
########----->from FND_PROFILE_OPTIONS_VL
########----->where PROFILE_OPTION_NAME like '%' || upper('&profile_option_name') || '%'
########----->order by PROFILE_OPTION_NAME
########----->/
## Now to upload
FNDLOAD apps/$CLIENT_APPS_PWD O Y UPLOAD $FND_TOP/patch/115/import/afscprof.lct POR_ENABLE_REQ_HEADER_CUST.ldt
For other config components download and upload you can refer the link- http://www.apps2fusion.com/apps/scripts/19-oracle-fndload-script-examples
Thanks,
Sanjay

Windows 7 and ThinkVantage System Update

I updated to the most recent release of the LSC (2.3.002) and now my warranty is showing. So that is good.
However, when I go to the fix option for the Lenovo Software updates, and I click "launch" to fix the issue, all I get is a small pop up that says "System update 5" and then goes away after a few seconds and nothing happens.
Have rebooted my computer and still nothing. I would like to get all the updates that I need for this machine asap.
Product ID: 7517B4U
Type-Model: 517-B4U
Serial number: xxxxxxx
Location: USA
Expiration Date: 2015-04-30
Any assistance is greatly appreciated!!

Link to picture
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

System Update 5.01 update only removes itself on Win7

I recently launched System Update (installed on Windows 7 x64 on my x230) version 5.01 and was notified that an update was available. After accepting the "install update?" query, the usual download and installation ensued... and guess what, after that (download+installation) something (UCS?) crashed and when looking for tvsu anywhere on my disk (Program Files, Program Files x86, ProgramData) all I could find was... well... nothing.
Are you trying to tell me something, Lenovo? That the best way to use System Update is to not use it?
Or is there a less subtle explanation as well?
If you care for why this happened, I'll delay installing the 5.02 TVSU until tomorrow... if you need any logfiles until then, tell me.
Beyond that, I suppose other end users will me more surprised and less happy / able to solve this.

Benjs,
Sounds like 5.01 tried to do an Update in place, to update to 5.02. Look in control panel>admin tools>event viewer for entries around the time of your Update.
-or- (easier)
Action center (white flag on task bar), Maintenance, View reliability history. Look on the bottom line for BLUE I icon (information), for the date of your attempted install(upgrade in place) of SU. On the bottom of the screen, documentation should show up, such as "Lenovo system update ,,,, Successful application removal" Go to the Far right of the line, and click on VIEW TECHNICAL DETAILS. You MIGHT see another detail line that states unsuccessfull application installation. VIEW TECHNICAL DETAILS
==
something (UCS?) crashed > I have know idea what you are stating.
==
Try to install from here:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?LegacyDocID=TVSU-UPDATE
The msi installer log will be found in C: Users\**YOUR id**\appdata\local\temp\TVSUsetup.log or similar. If msi failure, go to the bottom on the MSI log and look for error/failure/return codes and post them.
SU is found in Program files(x86)\lenovo\System Update. It does store data in \program data.
I installed SU 5.02(upgrade in place), without any issues. I also uninstalled it and reinstalled it yesterday, without any issues. The Upgrade in place does NOT give an option to create a shortcut to execute SU. Standalone install will create a short cut under LENOVO (folder) System Update(subfolder entry) .

Lenovo System Update fried my BIOS... What can I do?

Hi all,
I'm in a bind. I did a clean install of Vista, and then I ran ThinkVantage System Update. It pulled up the BIOS update as a critical issue (among others) and so I consented to install it. The problem is, halfway through the update process, it stopped responding. I gave it two hours, then, thinking that it might be okay (the updater hadn't gotten to "erasing old BIOS" or whatever...) I rebooted it.
Four beeps and then nothing. Nothing.
I took it to my university's ITS department, and they recommend a system board replacement. I can't afford that.
I was wondering if there was a way that I could reflash the BIOS myself, or if I had to send it to depot, what sort of time and cost I am looking at. Can anyone advise me on what I should do?

Have you contacted support as ProblematicT61p did?
By doing so it looks as though they got their problem was solved.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

System update 5.03 for T520i 4239CTO running windows 7 64-bit does not execute

Hi, I've just installed the latest Lenovo system update software but it does not run properly. I just get the initial popup screen showing the version but nothing else happens. Looking at the event viewer I see an error saying "Retrieved null machine type model". Any advice on how to resolve this ?
Tx,

Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

System update 5.06 fails to start

Continuing from: http://forums.lenovo.com/t5/ThinkVantage-Technologies/LSCWinService-stopped-will-not-stay-started/td... since the topic changed as we got closer to the problem:
System Udate 5.06 will not start.
Running:
Lenovo Support Center (LSC) 2.5.002
Lenovo System Update (SU) 5.06.0016
When I click "Launch" from inside LSC Software Updates I get a flash of a welcome screen (<1 sec) for SU that goes away immediatly. No UI appears. In task manager, tvsu.exe and tvsukernel.exe both start then dissappear (<1 sec). This happens if I directly launch tvsu.exe also.
When I run SU a log file is created for each run. The only line in each file is:
[Lenovo System Update build: 2014-06-18 5.06.0016] 7/22/2014 1:28:56 PM
Anyone with any info?

What is your machine type and model? Did your machine ship with SU installed? I suspect your machine is NOT supported via SU. Lenovo Idea Centre machines are not supported via SU. Check the SU supported machines list. If your machine is found, do the below.
Your recent LSC install. Check the support page for your system. not listed?
Let's install older SU 5.05 and see how that runs on your system
(1) uninstall SU 5.06.16 via control panel, programs and features Delete old logs during uninstall? yes
(2) download Su 5.05.008 from here
http://download.lenovo.com/pccbbs/thinkvantage_en/systemupdate505-02-14-2014.exe
Install it but DO NOT RUN IT right now.
(3)To prevent self update, regedit.exec
Navigate to:
HKLM\software\Wow6432node\Lenovo\System update. << I am win7 64 bit Mine is here.
-or-
HKLM\software\Lenovo\System update < 32 bit
On the right hand side is HelloClientLevel
you will see value=HelloLevel/9.09.00 < this will auto update..
Change to value=HelloLevel/9.10.00 < no autoupdate
(4) Run su 5.05 now. post back if it runs ok.

Lenovo System Update and Lenovo Support RSS Feed (X60)

Okay. I got Lenovo System Update (version 5, for Windows 7) and it did not offer me any Critical updates. Only Recommended and Optional ones. If it ain't broke, don't fix it, so I don't want to install Recommended and Optional updates, only the Critical ones if there is any.
On the other hand I also have the Lenovo Support RSS Feed. But they bring me to dead links. For my X60 the two drivers in my RSS Feed are
ThinkVantage Access Connections patch for Access Connections Version 5.95 for Windows 7 (32-bit, 64-...
Patch module for Power Manager for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit) - ThinkPad -
Both are totally dead links.
The tricky part is that there is absolutely no correlation between the two: totally different drivers in the System Update and the RSS Feed.

Hello both,
SU has been discontinued because old SU version wouldn´t work with SP2.
Refer to this thread in at the ThinkVantage board regarding this situation and possible solutions
and ask your questions there, please.
Thread locked.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Lenovo System Update creating problems in fresh installation of Win 7

I'm hoping I can get help from this forum...
I have a Thinkpad R61 7742-CTO that has its original XP Pro operating system in day-to-day use. It's time to finally update to Win 7 with XP due to sunset soon. (Although I think Win 7 is visually ugly compared to XP)
I removed my "production" XP disk drive and did a clean installation of Win 7 Pro on the original purchase ("test") disk, including the 140-some MS updates available as of yesterday. Everything runs fine, including using Windows Update to search for new important and optional updates. So far, so good. I next went to Lenovo's website and downloaded the current version of Lenovo's System Update. Again, no problems once that particular program was installed. I installed Lenovo optional updates also without encountering problems.
However, when I load the Lenovo important updates, which include Access Manager, Power Mgr, etc., various intel and other "enhancements", things go wrong. If I click on Windows Update, for example, I get a message that it is not running. If I then do the net start/net stop wuauserv routines I found when searching the exact error message, I get the error: System error 5 access denied. I get the same message for several similar admin routines, particularly those involving "net".
I have tried many of the supposed repairs, including MS Fix-Its, that appear in Google when I searched the error message. None has worked. (A couple Fixits I did manually and got the Access Denied messages again) So I've rolled back using the restore point just prior to downloading the Lenovo programs, and everthing resumes working as expected.
It seems that the Lenovo downloads are interfering with something, particularly my admin rights, in some way. There's only one user (me) and it has admin rights, no password & etc. Other odd things are Access Connections is running as is the basic Win 7 network app in the system tray. Perhaps the Lenovo apps are interfering with the similar Win apps rather than replacing them as intended?
Can anyone suggest an approach to solving my problem?
Thanks,
Greg

Hello and welcome,
It may be that TVSU is "updating" the AHCI driver (Intel Matrix Storage Manager or Rapid Storage Technology) to one that breaks Windows update.
You can try rolling back the driver to an earlier version or going to the Intel site and getting a later one.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/ThinkVantage-System-Update-blocks-Windows-Upda...
Z,
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

LSC no System Update option

Similar Messages

Maybe you are looking for