LSH error on installation server: Could not install DS as a service

Hi
we set up an installation server some time ago. In the past all users had administrative privileges therefore no LSH was necessary. Currently we are upgrading from Windows XP to Windows 7 and the users won't be admins anymore. That's why LSH is necessary now.
I tried to set the LSH up, but when I confirmed the DS und IS data in the LSH configuration, the following error appeared:
Could not install DS as a service
The server provides SAP GUI 7.20 PL 8
The installer version is 8.6.1.72 (latest!?) and reffering to note 1587566 didn't result in any solution. A similar problem is mentioned in thread LSH on installation-server fails with "Could not start DS as a service" but it doesn't help me either.
Did anyone figure out similar problems with LSH or knows a workaround/fix?
Kind regards
Jann

I looked into the logs and found the following:
14:00:38 NwSapsAtlC 1   Admin's choice: 'Configure DS'
14:00:38 NwSapSetUI 1
14:00:38 NwSapSetUI 1   UI: Show welcome page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:41 NwSapFeiUt 1E Security: failed to allow to replace process-level token
14:00:41 NwSapFeiUt 1   SERVICE Dep: RPCSS
14:00:41 NwSapFeiUt 1E Failed in call to CreateService in Create Error message: Der Kontoname ist unzulässig oder nicht vorhanden, oder das Kennwort ist für den angegebenen Kontennamen ungültig. Error code 0x00000421 (1057).
14:00:41 NwSapFeiUt 1E Failed in service creation
14:00:41 NwSapAdmin 1E ERROR: Could not install DS as a service.
14:00:41 NwSapSetUI 1
14:00:41 NwSapSetUI 1   UI: Will show finish page now...
14:08:16 NwSapsAtlC 1   Opening XML document 'C:InstServerSetup..SetupServerRecord.xml' (MS XML 3.0 SAX)
14:08:17 NwSapAdmin 1   Engine holds 3 registered event handlers
The password and user is definitly correct!

Similar Messages

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

How to fix error: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package."

ERROR: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." I have tried everything which I found on google and apple community. Does anybody have the exact solution? PLEASE HELP!

What has this to do with the application Front Row which this forum covers?
What are you trying to install, on what Mac, with what version of OS X?

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Network Error: Clean Access Server could not establish a secure connection to Clean Access Manager

Hello everyone
I am implementing a failover solution of NAC in OOB VG version 4.8, I have 2 CAS and 2 CAM.
The Error I am getting is when I connect to both IP address and the FQDN of the CAS.
===========
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at camsrv3.cadivi.gob.ve.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
==========
For the CAM's I use this names camsrv1 and camsrv2. then generate a CSR in the camsrv1 with the name camsrv3.mycompany.com corresponding to virtual ip and it exported to camsrv2, Install the CA certificate of the company and everything works perfect.
This is the failover configuration
CAM:
Primary:     10.1.206.248 camsrv1.mycompany.com
Secondary: 10.1.206.249 camsrv2.mycompany.com
Virtual:       10.1.206.250 camsrv3.mycompany.com
Then I do exactly the same steps for the CAS's and this is the failover configuration:
Primary:     10.1.216.248 cassrv1.mycompany.com
Secondary: 10.1.216.249 cassrv2.mycompany.com
Virtual:       10.1.216.250 cassrv3.mycompany.com
Then I add the certificate of CAM in the CAS on the tab "Trusted Certificate Authorities" and vice versa.
The communication between all the CAM´s and CAS´s is correct (Primary, Secondary and Virtual). I can ping the IP and the FQDN and I can also manage the CAS through the CAM.
I verify that the time was right in the CAM and the CAS and all good up there.
Appreciate your help
Eduardo Navas

Eduardo,
Bump up the CAS/CAS communications logging on both the CAS and CAMs, and then look in the log files for clues.
On CAM they live in /perfigo/control/tomcat/logs and on CAS in /perfigo/access/tomcat/logs
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily

HT4623 i have updated my i.phone 4 g but after updating when i turned on my phone it was showing the sign to connect to i.tunes and when when i connected i.tunes showed error that the server could not be contacted.... so what i can do now to resolve the

i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????

has your phone been jailbroken?

HT201210 trying to update my iphone but it ends up giving me an error saying , the server could not be contacted or is unavailabe ????

trying to update my iphone but it ends up giving me an error saying , the server could not be contacted or is unavailabe ????

Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

Boot camp 4.0 getting error the installer disc could not be found

boot camp 4.0 getting error the installer disc could not be found.

See if Windows 8 RP x64 works as an experiment.
Usually slowest burn speed will.
I am assuming that smething changed but there are I presume a number of other people who have, and folks with new MacBook Air too.

Why am I getting the error the installation package could not be opened when trying to install on Windows 7 64 bit

I reciece the follwing message when trying to install
"The Installation package could not be opened. Verify that the package exists, or contact the application vendor to verify that this a valid windows installer package"

Hey there Frank0619,
If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
Issues installing iTunes for Windows
These in particular:
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Thank you for using Apple Support Communities.
All the best,
Sterling

"Error Dialog: The server could not be contacted " when deploying web srvc

I have the J2EE 1.4 and Application Server 8 Q1 installed under windows. I have used all of the defaults on the install. The admin port is 4848. I want to install a web service on the http listener at 3345 (8080 was used and 3345 was substituted at installation time). I am getting the error from the deploytool when deploying the example web service "Hello". I am sure that the server is running and that the userid and password are the correct (I can log into the admin console with them). I've seen this error in other posts, but no solution. Does anyone have a solution to this???
Thanks in advance : )

yep, i get d same error on that, in fact, port 8000 is d default web service port, if i deploy the application via invalid port (eg. 4848 or 1234), i will get an error, say "cannot obtain a connected depolyment manager". but if i deploy that via 8000 (or 9191, it is also avaliable, casue i can connect to http://localhost:9191/ as default j2ee home page as well), i will get the error " the server could not be contected", and i m definitely sure that i can connect to console via 8000 and j2ee server is running by typing "j2ee -verbose" in command line.

Get error message that server could not be found when sending email thru iPhoto

I have established a icloud/mobile me account. Trying to use iphoto to send photos with emails and always get error message that server coule not be found.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Installation package from dist kit error: This installation package could not be opened by windows

Hi-
Can you please assist me with this error. I have created a dist kit which installs correctly on my PC that has the development environment installed (CVI2012), but fails install on new PC running Win7 (no dev environment installed). The error message is below. Is sometimes will go through the whole installation but never installs it on the PC. Sometimes is will error out right away as in pic below. Can you help? I don't know if this is a Windows problem or an NI problem.
Thanks-
Blue
Solved!
Go to Solution.
Attachments:
dist kit failure.JPG ‏117 KB

This error also occurs if the install package cannot be accessed properly (network connection, scratched disk, etc.) You could try copying the files directly to the computer to run the install or a new disc if it is scratched).
See example of this issue below for installing LabVIEW from DVD:
http://digital.ni.com/public.nsf/allkb/27BD42F4FDCBD4E7862576DD0057ADA5?OpenDocument
This might help eliminate issues other than the actual installer having an error.
- FCTesting

E-mail server could not be reached Error in Collaboration

Hi All,
I was trying to implement the collaboration feature - Send Email. I have configured email transport and have done the user mapping. When i click send email - it is throwing me the error
"E-mail server could not be reached, when system was trying to send the message"
The email service is active. The email channel is configured and the server is restarted.
Even the firewall is blocked. What could be the reason. I am able to send and receive mails from msoutook. what other configurations are required?
Please do help!
Thanks,
Divya

Hi Yusuf,
I have done that and still the same.
I have done the http proxy settings in visual admin. also tried blocking the firewall.
Am i missing some configurations?
Please do help in this issue.
Thanks,
Divya

Error RFC sender scenario :JCO.Server could not find server function

Hi ,
The scenario which am working is as follows:
I already have a report in R/3 that calls a Bapi which is in CRM system, now I want to make this point-point connection through XI(RFC sender-XI-RFC Reciever) with out changing the report (only changing the RFC destination).
I have imported the bapi from CRM to XI , changed the rfc destination(to tcp/ip) that existed in R/3 to point to XI(test connection is working fine) and also created the RFC sender adapter .
Now on executing the report am getting the following error.
JCO.Server could not find server function
Please, let me know where I went wrong.
Should the function module exists on the XI server. If the functional module is not there then I am getting the error if the function module is there in XI then every thing is working fine.

Hi Michal ,
Now my scenario is working . The error <b>"JCO.Server counld not find server function"</b> got fixed by giving the system details that contain the RFC in the adapter metadata parameters in the channel configuration.
Thanks & Regards,
Srikanth.

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package"

I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- “This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package”... Any suggestions how to fix?

Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

LSH error on installation server: Could not install DS as a service

Similar Messages

Maybe you are looking for