LSMW, 13 th step .error ---no such file found, editing was terminated

hi
Experts, what may be the reason for this.
upto 12 th step it is working ok.

Hi Freind,
       There's a Check box - <b>Keep Session</b> in 13 or 14th step.pls click ok to
       that and check ur process.
       After checking this run it.if it's not working then at the session step(14) u
       just unlock ur session and process it.
Thanks N Regards,
        Manian.

Similar Messages

Disk Utility errors: No such file -or- No space left on device (50GB+ free)

I am trying to make an image out of a _NTFS formatted_ parition, using around 4,5GB of data, of a freshly installed Windozs. It's for debugging tons of machines I have been given (to debug..) and I need an image done. Note that debating if using an image as a solution is good or not is not the point of this thread.
When I try to make a new image out of the parition (clicking "New Image"), using the defaults settings, I enter my admin pass, then I'm being shown "No space left on device". Wierd. The device I am writing the image onto has 51GB left, and the Trash is emptied.
I tried changing the image format to all the possible types in Disk Utility, but I get the same error: No space left on device.
I then changed the device, this time I used a volume with 10GB free on it. Then, I only managed to get a standard DMG compressed image, where I need a "DVD/CD master" one. I'm still confused, because no other image type worked.
Then I tried making a new image (not from a disk or volume, empty) and then just copy data to it (I'm sure it's really not the way to go, but still). After creating the empty image (I opted for an 8GB, DVD burnable style, "DVD/CD master"), I got the wierd error: No such file (straigth after the image creation, in Disk Utility).
More info about volumes and stuff:
Data to be imaged:
A single partition on a volume (connected with IDE to Mac Pro, but I don't see why it would matter)
Where I can save it:
I got a big bunch of volumes right here, internally.
I tried one with 50GB free, but failed. Another one, on another disk, with 10GB, but failed.
Also, this error comes often in Disk Utility and other unix OS I think, and mostly for no real known reason (in OS X), as most issues I found were still unresolved.
Thanks for any help

Hey,
Im having the same exact problem.
Toast even says it has a medium error with this drive.
I cant burn with toast and it wont play other DVD-R movies
that I have burnt on other systems.
What is the fix?

Oracle Secure Backup error: 'No such file or directory'

Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
jun

You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from.

There is error 'No such file or directory' during loading custom authentica

Hi,
I am working on OBIEE authentication using Hyperion shared services. I did the necessary changes in config file, like modifying config.xml to enable HSSauthenticator and enabling external authentication to instanceconfig.xml. However BI Server is unable to load the driver file for the Hyperion custom authenticator. Here is the error message.
There is error 'No such file or directory' during loading custom authentication module '/opt/local/usr/home/Oracle/OracleBI/web/bin64/libsawobisauthenticatorproxy643r.so'.
2011-06-26 21:04:05
[nQSError: 13011] Query for Initialization Block 'Hyperion EPM' has failed.
I have set the env variable LD_LIBRARY_PATH to this path but still I am getting the same error msg. I also have full previleges on this file. Would be really great if anyone can tell me why I am unable to load this driver file on to server. Thanks in advance

I think I figured out. Instead of giving path thru bin64 , I gave it thru bin folder, which is a 32bit file. I think they installled a 32bit OBIEE.

Fatal error: No such file or directory: Unable to open VLDC instance

Hi,
Been researching this one for a few days and seems no one has an answer that works. I've been through over 200 pages and couldn't find the answer.
Environment:
Server: Blade 6000 -- T6300 blade module
OS: Solaris 10 05/08
T6300 ALOM version:
System Firmware 6.3.6 Sun Blade[TM] T6300 2007/03/23 12:45
Host flash versions:
Hypervisor 1.3.3 2007/03/23 12:28
OBP 4.25.3 2007/03/02 20:24
Sun Blade T6300 Server Module POST 4.25.3 2007/03/02 20:53
LDOMs Manager: 1.0.3
The following entry shows up in my log file:
[ Sep 5 16:29:26 Method "start" exited with status 1 ]
[ Sep 5 16:29:26 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Added to channel ds, service dr-cpu, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl fo
contacting hypervisor
[ Sep 5 16:29:27 Method "start" exited with status 1 ]
Any help would be greatly appreciated!!!

Hi Every one,
I after installing Ldom , when I try to start ldom
I am getting same error ..any fix or any suggestion ?
./ldmd_start
Added to channel ds, service dr-cpu, versions 1.1 1.0
Added to channel ds, service dr-crypto-mau, versions 1.0
Added to channel ds, service dr-crypto-cwq, versions 1.0
Added to channel ds, service dr-vio, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel ds, service keystore, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/vi rtual-devices@100/channel-devices@200/virtual-channel@0:hvctl for contacting hyp ervisor

Clang: Error: No Such File or Directory

Hello Mac Communities,
I have recently installed Xcode 6.1.1, but currently just want to compile C files. I would like some help with a rather irritating error.
Here are the commands I try and their results.
command: gcc -c /Users/(my username)/Documents/C/helloworlddot1.c
result: error: no such file or directory: filename.c
or, after filename is changed to helloworld00.c;
command: ]gcc -c /Users/(my username)/Documents/c/helloworld00.c
result: (no text is displayed) The file helloworld00.o is created
That seemed to work for the moment, until I tried to compile/convert the machine code into a program:
command: gcc -c /Users/(my username)/Documents/c/helloworld00.o
result: clang: error: no input files
...which is weird.
Can anyone help with this?
P.S. Is this the best community to post this type of thing to?

You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from.

Webdynpro error - what happened calling the webdynpropage was terminated ..

Hello,
in WD-Application rendering by portal browsing with Firefox clicking a button it appears a popup.
The same WD-Application rendering by portal browsing with IE 6.0 clicking a button it appears not popup but a browser error-message
"webdynpro error - what happened calling the webdynpropage was terminated due to an error.
Error type: sapPopupMainIdX1"
Where is the probem.
We use Portal Netweaver 2004s, SP11 and as backendystsem for WD for Abap Netweaver 2004s, SP 09.
Best regards
Oliver Prodinger

The issue was actually caused by a kernel problem, as described in the topic
SAP NetWeaver 2004s ABAP Trial Version SP8 Troubleshooting Guide
I applied the recommended bug fixes and now it works perfectly!
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37">SAP NetWeaver 2004s ABAP Trial Version SP8 Troubleshooting Guide</a>
Hope It will solve your problem
Cheers
Parag

Error in Bdoc '....Editing was terminated'

Hi All,
         I am replicating the BP from CRM to ECC using BDoc type 'Bupa_main' when the BP
is saved under some role.
When I save the BP , the Bdoc shows in error 'Partially send, receivers have errors'.
After reprocessing the Bdoc in transaction SMW01, 1 entry is created in KNA1 and CRMKUNNR,
but no BP is created. The error list in transaction SMW01 is shown as
     Messages for business partner 0100000252:     XR     100
     ....Editing was terminated     FB     13
I checked in ST22, there are no runtime errors.
I tried CRMM_BUPA_MAP, there I get the message as
'005     4AF79F489B97018: Object is in status Running'
And there are no queues in SMQ1 or SMQ2.
Any idea why it is happening or how to solve it?

Hi Aditya,
The problem is mainly because of some user exits in your system.
So, if its possible, deactivate all the user exists from table : TBE24 and TPS34 in your system and try again.
And also check in the ECC system - CRMRFCPAR table field SEND_XML is set to "X". If both CRM and ECC are unicode system, then the SEND_XML field in the CRMRFCPAR table in the R/3 system should be set to "X"..
Also refer the following notes :
928974
788871
621470
1049761
Hope the above information would help you to solve the issue.
Best Regards,
Vignesh Ravikumar

Disk Utility error: "No such file or directory."

I'm trying to copy a DVD I made in iDVD. What I've always done in the past is to open Disk Utility, put the DVD in the optical drive, select "Images...New...Image From [optical drive]". But today when I do this I get an error message that says "No such file or directory."
I've tried selecting the drive ("2.0 GB PIONEER DVD-R...") and selecting the DVD ("CFTPRODUCTDEMO").
The DVD plays in DVD Player no problems. I have 11 GB free on my hard drive. I'm using a new Pioneer DVR-111D external optical drive (the internal 106D won't read DVDs it makes).
What's wrong?

Hey,
Im having the same exact problem.
Toast even says it has a medium error with this drive.
I cant burn with toast and it wont play other DVD-R movies
that I have burnt on other systems.
What is the fix?

./startserver.sh error - No such file or directory - server.properties

Hi,
Can someone help please.
I have just installed power center 8.1.1. and DAC server - software downloaded from OTN.
I am not able to start DAC server. I am new to OBIEE
$ ./startserver.sh
OS detected: Linux
Dec 25, 2008 1:54:41 PM com.siebel.etl.engine.core.ETLUtils logException
SEVERE:
ANOMALY INFO:::
An exception occurred. Shutting down server...
EXCEPTION CLASS::: java.lang.ExceptionInInitializerError
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::Application Manager Failed Initialization
EXCEPTION CLASS::: com.siebel.etl.bootup.ApplicationManagerInitializationExcepti on
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java: 157)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79 )
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
::: CAUSE :::
MESSAGE:::/u01/oracle/product/10.2.0/DAC/bifoundation/dac/conf/server.properties (No such file or directory)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java: 151)
com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79 )
com.siebel.etl.bootup.ApplicationManager.<clinit>(ApplicationManager.java:62)
com.siebel.etl.net.QServer.setSpill(QServer.java:159)
com.siebel.etl.net.QServer.<init>(QServer.java:84)
com.siebel.etl.net.QServer.main(QServer.java:420)
Dec 25, 2008 1:54:41 PM com.siebel.etl.net.QServer <init>
SEVERE:
Shutting down server...
$

Hi Chris
Could you refer the SAP KBA for the error message
1845424 - Web Dispatcher : SCSA and SysLog not found messages appear during startup
BR
SS

Compressor Error- No Such File Or Directory Help!

I was trying to export something from final cut pro in compressor when compressor gave me the following error- Failed: HOST [Avi-Zephyras-iMac.local] error reading source file /Users/Avi/Movies/Final Cut Events/2012 Event/Original Media/Photo125: No such file or directory
I really would appreciate some help! Needs to be exported this weekend.

I got the same error message, and found a similarity in our two cases that led me to the solution
Both of our filenames had an "&" in them. Notice that your original filename was photo125&126, but the error message only said photo125? My file had an ampersand, but the error message similarly only listed the name up until the ampersand.
So I duplicated the file in Finder, removed the original from my project and replaced it with the new one, sans &, and it worked just fine! And it's my first distributed encode with Compressor and Qmaster, so double win!

Pacman Error: No such file or directory, please help

This morning I decided to make a package using the ABS and I noticed this error when executing Pacman.
error: /var/lib/pacman/local/pacman-2.9.8-1/desc: No such file or directory
Consequently, the custom package (Gaim Beta 4) kept complaining about dependancies, when I knew those packages were installed in the system. I did some searching around and it appeared that my local database may be currupted? At any rate, one of the posters suggested to forcefully reinstall the offending package, which I did. Upon doing so, it appeared that I had found a solution. However, after installing another package, the error appeared again. Repeating the process resolves the error, but only once before it occurs again.
Upon further searching, another poster suggested that I should remove the offending directory, and then reinstall the package. When I attempt to remove the directory, I get a kernel panic and my entire system freezes. Since there is so much output, I've take a photo of the error (X just freezes).
I apologise for the dodgy flash, but you can see the output. If anyone could offer any suggestions/assistance, I'd appreciate it.
Cheers,
Tate
EDIT: If it helps, I'm using the latest 2.6.18 stock Arch Kernel and LVM2 with ReiserFS.

try this:
cd /var/lib/pacman/local
mv pacman-2.9.8-1 pacman-2.9.8-1.old
pacman -Sf pacman
verify /var/lib/pacman/local/pacman-2.9.8-1 folder exists
verify that following files are in folder: depends, desc, files, install
verify pacman -Syu works
rm -rf /var/lib/pacman/local/pacman-2.9.8-1.old

FastCGI error "no such file or directory"

I am trying to get a public face on django with my Mac OS X server 10.4.9 using mod_fastcgi. Django is installed and everything works fine in my shell (bash + python 2.4).
I noticed these lines in the error log:
[error] (2)No such file or directory: FastCGI: doesn't exist and can't be created: No such file or directory
[error] (2)No such file or directory: FastCGI: can't create dynamic directory "/usr/logs/fastcgi/dynamic": doesn't exist and can't be created: No such file or directory
[notice] FastCGI: process manager initialized (pid 1477)
[notice] Apache/1.3.33 (Darwin) mod_fastcgi/2.4.2 mod_jk/1.2.6 DAV/1.0.3 mod_ssl/2.8.24 OpenSSL/0.9.7l PHP/4.4.4 configured -- resuming normal operations
It appears the first two lines are errors that are followed by a positive indication.
I am confused as to what this means and how to resolve it. Links to info, suggestions, etc. would be gratefully received.

I abandoned use of fastcgi; see similar posts I made about the same date as this one.

Txn_checkpoint error: no such file or directory

hi:
I am using berkeley db with the python binding. But my program always through a exception like this:
environment.txn_checkpoint()
bsddb._db.DBNoSuchFileError: (2, 'No such file or directory -- txn_checkpoint: failed to flush the buffer cache No such file or directory')
There are several processes are using berkeley db, any body can give me a hint of why this happen? Which file does buffer cache stores?
Thank you.
-qiao

Hi qiao,
What Berkeley DB version are you using?
How do you use set_data_dir?
Maybe you don't have DB_CREATE set, or maybe the path names are wrong, or maybe you are reordering directories.... there are many scenarios that may lead to this error.
Can you please send me an example program that fails in the way you describe? I'll see if I can duplicate and debug the failure locally.
txn_checkpoint method may fail if no environment is specified.
Can you tell me the: Berkeley DB path, source code path, DB_HOME path? Also, be sure that you have write permissions on database disk directory, in order for checkpoint to flush the data.
Regards,
Bogdan Coman

Switch Boot Error--no such file or directory

Hi,
I have upgraded the firmware of 3500 xl switch. When i reset the switch its going to switch: prompt and giving the No such file or directory erro.
Whereas if i see dir flash: the ios file is listed there.
I am attaching the detail observation/error file for reference.
Please suggest.
Regards,

Hi Amit,
Find the output of each command.
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch: load_helper
switch: BOOT:=flash:c3500xl-c3h2s-mz.120-5.WC12.bin
Can't set variable with illegal char ":" (0x3a) in name.
switch: sync
Unknown cmd: sync
And after giving the command.
boot flash:c3500xl-c3h2s-mz.120-5.WC12.bin
The switch was rebooted from the flash and i could get the username and password screen.But again when i rebooted it was came to switch: screen.
Please suggest.
Thanks

LSMW, 13 th step .error ---no such file found, editing was terminated

Similar Messages

Maybe you are looking for