LSMW-BAPI Sales order creation

Hi All,
I was trying to create sales order through the LSMW BAPI method.
For the first line item i'm getting the correct quantity that i''m passing.
But from second line item onwards quantity field is appearing as 0 (zero) even though i pass the different quantity values.
i'm assiging the quantity to the REQ_QTY field in the schedule line items structure.
Please suggest any solution for this.
Thanking you.
with regards,
Bharath

Hi,
Can u tell me the steps to create a sales order using idoc, i've created a bapi but thats a temprory use. I wanted to created a sales order automatically when a purchase order is saved.
Please let me know if u can help me, i wanted to do it using idoc
Regards
Sanju

Similar Messages

Userexit in BAPI sales order creation

HI all,
My requirement is one SERIALNUMBER field add BAPI salesorder creation.
That field not existed in satndard BAPI structures.BAPI input XML file.
Salesorder>extras(menu)>Technical object->serialmumber[RIPW0SERNR).
please give any enhancement serial number BAPI sales order creation.
Thanks.
Edited by: sreddy GPs on Sep 23, 2008 5:59 AM

Hello,
Whatever the Structure that you are refering to in the BAPI for Sales Order Creation, use an Append Structure to add the SERIALNUMBER field to the existing Standard BAPI Structure.
For your information, the following are the BAPIs that can be used for Sales Order Creation.
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_SALESORDER_CREATEFROMDATA
BAPI_SALESORDER_CREATEBOS
Hope it would serve your purpose.
Thanks and Regards,
Venkat Phani Prasad Konduri

LSMW bapi sales order

hi folks,
iam doing LSMW Bapi method for sales order creation do we need to create mandatorly header and item structure for in source structure creation in LSMW ?points will be rewarded for useful answers.

Yes u need to create two structures one for header and the other for line item. Within Src structure first create Structure for Header Data then create another structure UNDER Header Data (LOWER LEVEL).
~Sid

Error in bapi sales order creation

hi..
I m creating sales order using bapi fm, It was working fine, but all of a sudden it is giving error 'NO OBJECT STATUS AVAILABLE FOR SDI 0.' and Sales order is not gettign created. Any idea why the problem occurs?

Hi Cynthia,
This is probably caused by a COMMIT WORK in a user exit during sales order processing. This COMMIT WORK triggers FM BUFFER_STATUS_REFRESH which in turn causes this problem.
You can easily find out by putting a break-point in this FM and then take a look in the call-stack to find out where the commit work occurred.
Regards.
John.

LSMW Sales Order creation using Bapi method

Hi folks ,
iam doing Lsmw bapimethod ,sales order creation .In the step start idoc processing iam getting error "Has Not been Accepted for Processing ",why iam not getting plz let me know points will be awarded for all answers .

Hi,
You need to set the IDOC settings in the initial LSMW screen. It will be there in menu path.
Award points if helpful
Regards,
RamaKrishna C

Regarding Sales Order Creation

hi all,
I have one requirement , i.e Our Client has one wish that for every customer he is fixing some line items means 5 or 6 line items. IF it is less than that sales order will not create for that particular customer and it needs to show warning message .
How can i achieve this .
Plz send some suggetions to solve this problem.
Regards
Rami Reddy

hi,
pls see the below threads.
SALES ORDER creation using BAPI
sales order creation/change
XML upload of data into SAP - Sale order creation
sales order creation
Sales order creation BAPI
thanks
karthik

Sales order creation with bapi in webdynpro using table control

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items. Pls give me some idea to resolve this issue, here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' method CREATE_SALES_ORDER .
Declaration for Order Header Node DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

Sales order creation with bapi in webdynpro

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
       elem_order_header TYPE REF TO if_wd_context_element,
       stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
       elem_order_items TYPE REF TO if_wd_context_element,
       stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
      i_order_header_in TYPE table of bapisdhd1,"
      i_order_partners TYPE TABLE OF bapiparnr,
      w_order_partners TYPE bapiparnr,
      i_return TYPE TABLE OF bapiret2,
      w_return TYPE bapiret2,
      i_order_items_in TYPE TABLE OF bapisditm,
      w_order_items_in TYPE bapisditm,
      i_order_conditions_in TYPE TABLE OF bapicond,
      w_order_conditions_in TYPE bapicond,
      w_order_SCHDL type BAPISCHDL,
      i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input = w_order_items_in-material
   IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
   IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
         w_order_SCHDL-req_qty     = stru_order_items-target_qty." '5'.
          APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
   order_header_in = w_order_header_in
   IMPORTING
     salesdocument = v_sales_doc
     TABLES
       return = i_return
       order_items_in = i_order_items_in
       order_partners = i_order_partners
        order_schedules_in = i_order_SCHDL
       order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
    RECEIVING
      message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
      wait = 'X'.
    CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
    INTO v_message_text SEPARATED BY space.
Report Success message
    CALL METHOD l_message_manager->report_success
    EXPORTING message_text = v_message_text.
    ELSE.
      v_message_text = 'Error Creating Sales Order'.
Report Error message
      CALL METHOD l_message_manager->report_error_message
      EXPORTING message_text = v_message_text.
      ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
        itm_number type bapisditm-itm_number,
        material type bapisditm-material,
        plant type bapisditm-plant ,
        target_qty type bapisditm-target_qty,
        target_qu type bapisditm-target_qu,
        target_val type bapisditm-target_val,
    currency type bapisditm-currency,
        end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
        wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
   APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
       elem_order_header TYPE REF TO if_wd_context_element,
       stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
       elem_order_items TYPE REF TO if_wd_context_element,
       stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
      i_order_header_in TYPE table of bapisdhd1,"
      i_order_partners TYPE TABLE OF bapiparnr,
      w_order_partners TYPE bapiparnr,
      i_return TYPE TABLE OF bapiret2,
      w_return TYPE bapiret2,
      i_order_items_in TYPE TABLE OF bapisditm,
      w_order_items_in TYPE bapisditm,
      i_order_conditions_in TYPE TABLE OF bapicond,
      w_order_conditions_in TYPE bapicond,
      w_order_SCHDL type BAPISCHDL,
      i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input = w_order_items_in-material
   IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
   IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
         w_order_SCHDL-req_qty     = stru_order_items-target_qty." '5'.
          APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
   order_header_in = w_order_header_in
   IMPORTING
     salesdocument = v_sales_doc
     TABLES
       return = i_return
       order_items_in = i_order_items_in
       order_partners = i_order_partners
        order_schedules_in = i_order_SCHDL
       order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
    RECEIVING
      message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
      wait = 'X'.
    CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
    INTO v_message_text SEPARATED BY space.
Report Success message
    CALL METHOD l_message_manager->report_success
    EXPORTING message_text = v_message_text.
    ELSE.
      v_message_text = 'Error Creating Sales Order'.
Report Error message
      CALL METHOD l_message_manager->report_error_message
      EXPORTING message_text = v_message_text.
      ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
        itm_number type bapisditm-itm_number,
        material type bapisditm-material,
        plant type bapisditm-plant ,
        target_qty type bapisditm-target_qty,
        target_qu type bapisditm-target_qu,
        target_val type bapisditm-target_val,
    currency type bapisditm-currency,
        end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
        wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
   APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.

BAPI - Problem in Sales order creation

Hi Friends,
I have problem in Sales order creation using BAPI ,I am getting a messsage - Error in creating document ,I have sent the code along with this mail ,can you help it out.
Code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text   = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
       EXPORTING
            sales_header_in     = header
            sales_header_inx    = headerx
       IMPORTING
            salesdocument_ex    = v_vbeln
       TABLES
            return              = return
            sales_items_in      = item
            sales_items_inx     = itemx
            sales_schedules_in = lt_schedules_in
            sales_schedules_inx = lt_schedules_inx
            sales_partners      = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
    COMMIT WORK AND WAIT.
    WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
Regards,
Dinesh

what messages u are gettting in RETURN ? Please check the RETURN tables data.
[code]CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Regards
Prabhu

Reena Prabhakar - Sales order creation Using BAPI

Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
Dinesh

Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = l_order_header
    IMPORTING
      salesdocument       = l_salesdocument
    TABLES
      return              = it_return
      order_items_in      = it_order_items
      order_partners      = it_order_partners
      order_schedules_in = it_order_schdl
      order_conditions_in = it_order_conditions
      order_text          = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION.

Need sales order creation using bapi in oops

need code for sales order creation using bapi in oops

hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan

Mass sales order creation using BAPI

Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandra

Hi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K

SALES order creation using BAPI's

Hai to all,
I want to create sales order using bapis .I am new to this topic could any body guide me how to create sales order step by step process using bapis.
Thanks in advance.
Regards,
Chaitanya

**　プログラムＩＤ　　　　　　 ： ZBAPI_SALESORDER_CREATE               *
**　プログラム名称　　    　　 ： Upload Sales Order Creation                   *
**　処理概要　　　　　　　   　：                                       *
**　作成者　　　　　　　　　　 ： Karthik.P                             *
**　作成日　　　　　　　　　　 ： 2006/08/10                            *
REPORT ZBAPI_SALESORDER_CREATE LINE-SIZE 132 MESSAGE-ID ZMMBAPI .
       Internal table definition                                     *
****<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>>>
DATA: GT_ORDER_HEADER_IN LIKE BAPISDHD1,
*******<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
      GT_ORDER_HEADER_INX LIKE    BAPISDHD1X,
*****<<<<<Return Parameter>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
      GT_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE, " Return Messages
*********<<<Communication Fields: Sales and Distribution Document Item<>>>>>
      GT_ORDER_ITEMS_IN LIKE BAPISDITM OCCURS 0 WITH HEADER LINE, " Item Data
*********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
      GT_ORDER_ITEMS_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE, "Item Data Checkbox
*********<<<Communication Fields: Sales and Distribution Document Item>>>>>>>
      GT_SALESDOCUMENT LIKE BAPIVBELN-VBELN , "Number of Generated Document
*********<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
      GT_ORDER_PARTNERS LIKE BAPIPARNR OCCURS 0 WITH HEADER LINE, "Document Partner
********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
      GT_ORDER_SCHEDULES_IN LIKE BAPISCHDL OCCURS 0 WITH HEADER LINE, "Schedule Line Data
****<<<<<<<<Checkbox List for Maintaining Sales Document Schedule Line>>>>>>>>
      GT_ORDER_SCHEDULES_INX LIKE BAPISCHDLX OCCURS 0 WITH HEADER LINE, " Checkbox Schedule Line Data
*******Communication Fields for Maintaining Conditions in the Order
      GT_ORDER_CONDITIONS_IN LIKE BAPICOND OCCURS 0 WITH HEADER LINE,
******Communication Fields for Maintaining Conditions in the Order
      GT_ORDER_CONDITIONS_INX LIKE BAPICONDX OCCURS 0 WITH HEADER LINE.
       Data definition                                               *
DATA: BEGIN OF GT_FT_SALES OCCURS 0,
       DOC_TYPE(4) ,        "Sales Document Type
       SALES_ORG(4) ,        "Sales Organization
       DISTR_CHAN(2) ,      "Distribution Channel
       DIVISION(2)   ,       "DIVISION(2)
       SALES_DIST(6) ,      "Sales district
       INCOTERMS1(3) ,      "Incoterms (part 1)
       INCOTERMS2(28) ,     "Incoterms (part 2)
       PMNTTRMS(4) ,        "Terms of payment key
       PRICE_DATE(8) ,       "Date for pricing and exchange rate
       PURCH_NO_C(35) ,     "Customer purchase order number
       PURCH_NO_S(35) ,     "Ship-to Party's Purchase Order Number
       EXCHG_RATE(8) ,      "Directly quoted exchange rate for pricing and statistics
       CURRENCY(5) ,         "SD document currency
       MATERIAL(18),         "MATERIAL
       TARGET_QTY(13) ,     "Target quantity in sales units
       ITEM_CATEG(4) ,      "Sales document item category
       MATL_GROUP(8) ,      "Material Group
       PURCH_NO_C1(35),      "Customer purchase order number
       SALES_DIST1(6) ,     "Sales district
       INCOTERMS11(3) ,     "Incoterms (part 1)
       INCOTERMS21(28),     "Incoterms (part 2)
       PMNTTRMS1(4) ,     "Terms of payment key
       EXCHG_RATE1(8) ,    "Directly quoted exchange rate for pricing and statistics
       PRICE_DATE1(8) ,    "Date for pricing and exchange rate
       TRG_QTY_NO(5)    , "Factor for converting sales units to base units (target qty)
       DIVISION1(2)     ,                                   "DIVISION1
       SALQTYNUM(5)     , "Numerator (factor) for conversion of sales quantity into SKU
       GROSS_WGHT(3)    , "Gross Weight of the Item
       NET_WEIGHT(15)    , "Net Weight of the Item
       UNTOF_WGHT(3)    ,"Weight Unit
       PARTN_ROLE(2)   ,"Partner function
       PARTN_NUMB(10)   ,"Customer Number 1
********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
       ITM_NUMBER(6) ,"Item number of the SD document
       REQ_QTY(8) , "Schedule line date
       DLV_DATE(8) , "Schedule line date
       MS_DATE(8) , "Material availability date
       LOAD_DATE(8) , "Loading time (local time with reference to a shipping point)
       GI_DATE(8), "Time of goods issue (local DATE, with reference to a plant)
       TP_DATE(8) , "Transportation planning -time (local w/ref. to shipping pnt)
       ITM_NUMBER2(6) , "Condition item number
END OF GT_FT_SALES,
       MSG(240) TYPE C, " Return Message
       E_REC(8) TYPE C,    " Error Records Counter
       REC_NO(8) TYPE C, " Records Number Indicator
       S_REC(8) TYPE C,   " Successful Records Counter
       T_REC(8) TYPE C.   " Total Records Counter
selection block for EXCEL UPLOAD FILE>>>>>>>>>>>>>>>>>>>>>>>>
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETERS FILE TYPE IBIPPARMS-PATH OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
*<<<<AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .>>>>>>>>>>>>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILE .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = FILE.
**<<<<<<<<<<<<<<<<<START-OF-SELECTION.>>>>>>>>>>>>>>>>>>>>>>>>>>>
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'                                 "#EC *
    EXPORTING
      FILENAME                = FILE
      FILETYPE                = 'DAT'
    TABLES
      DATA_TAB                = GT_FT_SALES
    EXCEPTIONS
      CONVERSION_ERROR        = 1
      FILE_OPEN_ERROR         = 2
      FILE_READ_ERROR         = 3
      INVALID_TYPE            = 4
      NO_BATCH                = 5
      UNKNOWN_ERROR           = 6
      INVALID_TABLE_WIDTH     = 7
      GUI_REFUSE_FILETRANSFER = 8
      CUSTOMER_ERROR          = 9
      NO_AUTHORITY            = 10
      OTHERS                  = 11.
IF SY-SUBRC <> 0 .
    MESSAGE E000.
ENDIF.
SKIP 3.
FORMAT COLOR COL_HEADING INVERSE ON.
    WRITE 40 TEXT-001.
FORMAT COLOR COL_HEADING INVERSE OFF.
SKIP 1.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
    WRITE :/ TEXT-002, 13 SY-MANDT , 104 TEXT-003, 111 SY-UNAME,
              / TEXT-004, 13 SY-DATUM , 104 TEXT-005, 111 SY-UZEIT.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
SKIP 3.
LOOP AT GT_FT_SALES.
      PERFORM SLALE_UPLOAD_DATA.
ENDLOOP.
T_REC = E_REC + S_REC.
SKIP 3.
FORMAT COLOR COL_TOTAL INVERSE ON.
    WRITE: /38 TEXT-007, T_REC.
FORMAT COLOR COL_TOTAL INVERSE OFF.
FORMAT COLOR COL_NEGATIVE INVERSE ON.
    WRITE: /38 TEXT-008, E_REC.
FORMAT COLOR COL_NEGATIVE INVERSE OFF.
FORMAT COLOR COL_TOTAL INVERSE ON.
    WRITE: /38 TEXT-009, S_REC.
FORMAT COLOR COL_TOTAL INVERSE OFF.
*&      Form SLALE_UPLOAD_DATA
      text
--> p1        text
<-- p2        text
FORM SLALE_UPLOAD_DATA .
*******<<<<<<<<<<Communication Fields: Sales and Distribution Document Header>>>>>>
    GT_ORDER_HEADER_IN-DOC_TYPE =    'TA'.
    GT_ORDER_HEADER_IN-SALES_ORG = GT_FT_SALES-SALES_ORG . "'0001'
    GT_ORDER_HEADER_IN-DISTR_CHAN = GT_FT_SALES-DISTR_CHAN. "'01'
    GT_ORDER_HEADER_IN-DIVISION =   GT_FT_SALES-DIVISION. " '01'
    GT_ORDER_HEADER_IN-SALES_DIST = GT_FT_SALES-SALES_DIST ."'000001'
    GT_ORDER_HEADER_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1. "'CFR'
    GT_ORDER_HEADER_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
    GT_ORDER_HEADER_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS .    "'0001'
    GT_ORDER_HEADER_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE ."'20060818'
    GT_ORDER_HEADER_IN-PURCH_NO_C = '32'.
    GT_ORDER_HEADER_IN-PURCH_NO_S =   '32'.
    GT_ORDER_HEADER_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE ."'1.00000'
    GT_ORDER_HEADER_IN-CURRENCY = GT_FT_SALES-CURRENCY . " 'EUR'
********<<<Checkbox Fields for Sales and Distribution Document Header>>>>>>>>>
    GT_ORDER_HEADER_INX-DOC_TYPE   = 'X'.
    GT_ORDER_HEADER_INX-SALES_ORG = 'X'.
    GT_ORDER_HEADER_INX-DISTR_CHAN = 'X'.
    GT_ORDER_HEADER_INX-DIVISION   = 'X'.
    GT_ORDER_HEADER_INX-SALES_DIST = 'X'.
    GT_ORDER_HEADER_INX-INCOTERMS1 = 'X'.
    GT_ORDER_HEADER_INX-INCOTERMS2 = 'X'.
    GT_ORDER_HEADER_INX-PMNTTRMS =   'X'.
    GT_ORDER_HEADER_INX-PRICE_DATE = 'X'.
    GT_ORDER_HEADER_INX-PURCH_NO_C = 'X'.
    GT_ORDER_HEADER_INX-PURCH_NO_S = 'X'.
    GT_ORDER_HEADER_INX-EXCHG_RATE = 'X'.
    GT_ORDER_HEADER_INX-CURRENCY = 'X'.
*****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
    GT_ORDER_ITEMS_IN-ITM_NUMBER = '000010'.
    GT_ORDER_ITEMS_IN-MATERIAL = GT_FT_SALES-MATERIAL .
    GT_ORDER_ITEMS_IN-PO_ITM_NO = '32'.
    GT_ORDER_ITEMS_IN-CUST_MAT22 = 'AGNI-IV'.
    GT_ORDER_ITEMS_IN-BILL_DATE = '20060808'.
    GT_ORDER_ITEMS_IN-PLANT = '0001'.
*GT_ORDER_ITEMS_IN-STORE_LOC = '0001'.
    GT_ORDER_ITEMS_IN-TARGET_QTY = GT_FT_SALES-TARGET_QTY . "'1000'
    GT_ORDER_ITEMS_IN-ITEM_CATEG = GT_FT_SALES-ITEM_CATEG . "'TAN'
    GT_ORDER_ITEMS_IN-MATL_GROUP = GT_FT_SALES-MATL_GROUP . "'01'
    GT_ORDER_ITEMS_IN-PURCH_NO_C = GT_FT_SALES-PURCH_NO_C . "'32'
    GT_ORDER_ITEMS_IN-SALES_DIST = GT_FT_SALES-SALES_DIST . "'000001'
    GT_ORDER_ITEMS_IN-INCOTERMS1 = GT_FT_SALES-INCOTERMS1 . "'CFR'
    GT_ORDER_ITEMS_IN-INCOTERMS2 = GT_FT_SALES-INCOTERMS2 . "'HAMBURG'
    GT_ORDER_ITEMS_IN-PMNTTRMS = GT_FT_SALES-PMNTTRMS .    "'0001'.
    GT_ORDER_ITEMS_IN-EXCHG_RATE = GT_FT_SALES-EXCHG_RATE . "'1.00000'
    GT_ORDER_ITEMS_IN-PRICE_DATE = GT_FT_SALES-PRICE_DATE . "'20060808'
*GT_ORDER_ITEMS_IN-SALES_UNIT = 'DZ'.
    GT_ORDER_ITEMS_IN-TRG_QTY_NO = GT_FT_SALES-TRG_QTY_NO . "'23'
    GT_ORDER_ITEMS_IN-DIVISION = GT_FT_SALES-DIVISION   .   "'01'
    GT_ORDER_ITEMS_IN-SALQTYNUM = GT_FT_SALES-SALQTYNUM .   "'32'
    GT_ORDER_ITEMS_IN-GROSS_WGHT = GT_FT_SALES-GROSS_WGHT. " ' 25272000'
    GT_ORDER_ITEMS_IN-NET_WEIGHT = GT_FT_SALES-NET_WEIGHT. "'24464000'
    GT_ORDER_ITEMS_IN-UNTOF_WGHT = GT_FT_SALES-UNTOF_WGHT . " 'KG'
*GT_ORDER_ITEMS_IN-CURRENCY = 'EUR'.
    APPEND GT_ORDER_ITEMS_IN.
****<<<<<<Communication Fields: Sales and Distribution Document Item>>>
    GT_ORDER_ITEMS_INX-ITM_NUMBER = '000010'.
    GT_ORDER_ITEMS_INX-MATERIAL = 'X'.
*GT_ORDER_ITEMS_INX-PO_ITM_NO = 'X'.
    GT_ORDER_ITEMS_INX-CUST_MAT22 = 'X'.
    GT_ORDER_ITEMS_INX-BILL_DATE = 'X'.
    GT_ORDER_ITEMS_INX-PLANT = 'X'.
*GT_ORDER_ITEMS_INX-STORE_LOC = 'X'.
    GT_ORDER_ITEMS_INX-TARGET_QTY = 'X'.
    GT_ORDER_ITEMS_INX-ITEM_CATEG = 'X'.
    GT_ORDER_ITEMS_INX-MATL_GROUP = 'X'.
    GT_ORDER_ITEMS_INX-PURCH_NO_C = 'X'.
    GT_ORDER_ITEMS_INX-SALES_DIST = 'X'.
    GT_ORDER_ITEMS_INX-INCOTERMS1 = 'X'.
    GT_ORDER_ITEMS_INX-INCOTERMS2 = 'X'.
    GT_ORDER_ITEMS_INX-PMNTTRMS = 'X'.
    GT_ORDER_ITEMS_INX-EXCHG_RATE = 'X'.
    GT_ORDER_ITEMS_INX-PRICE_DATE = 'X'.
*GT_ORDER_ITEMS_INX-SALES_UNIT = 'X'.
    GT_ORDER_ITEMS_INX-TRG_QTY_NO = 'X'.
    GT_ORDER_ITEMS_INX-DIVISION = 'X'.
    GT_ORDER_ITEMS_INX-SALQTYNUM = 'X'.
    GT_ORDER_ITEMS_INX-GROSS_WGHT = 'X'.
    GT_ORDER_ITEMS_INX-NET_WEIGHT = 'X'.
    GT_ORDER_ITEMS_INX-UNTOF_WGHT = 'X'.
*GT_ORDER_ITEMS_IN-CURRENCY = 'x'.
    APPEND GT_ORDER_ITEMS_INX.
*****<<<<<<Communications Fields: SD Document Partner: WWW
    GT_ORDER_PARTNERS-PARTN_ROLE =   'WE'.
    GT_ORDER_PARTNERS-PARTN_NUMB = '0000000057'.
***GT_ORDER_PARTNERS-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER . " '000010'.
    APPEND GT_ORDER_PARTNERS.
*********<<<<Communications Fields: SD Document Partner: WWW>>>>>>>>>>>>>>>>>>
    GT_ORDER_SCHEDULES_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER." '000010'
    GT_ORDER_SCHEDULES_IN-REQ_QTY = GT_FT_SALES-REQ_QTY .   "'234'
    GT_ORDER_SCHEDULES_IN-DLV_DATE = GT_FT_SALES-DLV_DATE ." '20060824'.
    GT_ORDER_SCHEDULES_IN-MS_DATE = GT_FT_SALES-MS_DATE . "'20060808'
    GT_ORDER_SCHEDULES_IN-LOAD_DATE = GT_FT_SALES-LOAD_DATE. " '20060822'
    GT_ORDER_SCHEDULES_IN-GI_DATE = GT_FT_SALES-GI_DATE . " '20060823'
    GT_ORDER_SCHEDULES_IN-TP_DATE = GT_FT_SALES-TP_DATE .   "'20060821'
    APPEND gt_ORDER_SCHEDULES_IN.
*********<<<<Communications Fields: SD Document Partner: WWW FLAG>>>>>>>>>>>>>>>>>>
    GT_ORDER_SCHEDULES_INX-ITM_NUMBER = '000010'.
    GT_ORDER_SCHEDULES_INX-REQ_QTY = 'X'.
    GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
    GT_ORDER_SCHEDULES_INX-MS_DATE = 'X'.
    GT_ORDER_SCHEDULES_INX-LOAD_DATE = 'X'.
    GT_ORDER_SCHEDULES_INX-GI_DATE = 'X'.
    GT_ORDER_SCHEDULES_INX-DLV_DATE = 'X'.
    APPEND gt_ORDER_SCHEDULES_INX.
********Communication Fields for Maintaining Conditions in the Order
    GT_ORDER_CONDITIONS_IN-ITM_NUMBER = GT_FT_SALES-ITM_NUMBER ." '000010'
    APPEND GT_ORDER_CONDITIONS_IN.
***Communication Fields for Maintaining Conditions in the Order
    GT_ORDER_CONDITIONS_INX-ITM_NUMBER = '000010'.
    APPEND GT_ORDER_CONDITIONS_INX.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
      EXPORTING
   SALESDOCUMENTIN               =
        ORDER_HEADER_IN               = GT_ORDER_HEADER_IN
        ORDER_HEADER_INX              = GT_ORDER_HEADER_INX
SENDER                        =
BINARY_RELATIONSHIPTYPE       =
INT_NUMBER_ASSIGNMENT         =
BEHAVE_WHEN_ERROR             =
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
     IMPORTING
       SALESDOCUMENT                  = GT_SALESDOCUMENT
      TABLES
       RETURN                         = GT_RETURN
        ORDER_ITEMS_IN                = GT_ORDER_ITEMS_IN
        ORDER_ITEMS_INX               = GT_ORDER_ITEMS_INX
        ORDER_PARTNERS                = GT_ORDER_PARTNERS
       ORDER_SCHEDULES_IN            = GT_ORDER_SCHEDULES_IN
       ORDER_SCHEDULES_INX           = GT_ORDER_SCHEDULES_INX
       ORDER_CONDITIONS_IN           = GT_ORDER_CONDITIONS_IN
       ORDER_CONDITIONS_INX          = GT_ORDER_CONDITIONS_INX
ORDER_CFGS_REF                =
ORDER_CFGS_INST               =
ORDER_CFGS_PART_OF            =
ORDER_CFGS_VALUE              =
ORDER_CFGS_BLOB               =
ORDER_CFGS_VK                 =
ORDER_CFGS_REFINST            =
ORDER_CCARD                   =
ORDER_TEXT                    =
ORDER_KEYS                    =
EXTENSIONIN                   =
PARTNERADDRESSES              =
    IF GT_RETURN-TYPE EQ 'E' .
      E_REC = E_REC + 1.
      READ TABLE GT_RETURN WITH KEY ID = 'V1'.
      FORMAT COLOR COL_NEGATIVE INVERSE ON.
      REC_NO = E_REC + S_REC.
          CONCATENATE TEXT-006 REC_NO ':'
          GT_RETURN-MESSAGE INTO MSG SEPARATED BY SPACE .
          CONDENSE MSG.
          WRITE: / MSG.
      FORMAT COLOR COL_NEGATIVE INVERSE OFF.
ELSEIF GT_RETURN-TYPE EQ 'S'.
      S_REC = S_REC + 1.
      FORMAT COLOR COL_POSITIVE INVERSE ON.
          MSG = GT_RETURN-MESSAGE.
          CONDENSE MSG.
          WRITE: / MSG .
      FORMAT COLOR COL_POSITIVE INVERSE OFF.
     PERFORM COMMIT_MM.
ENDIF.
      CLEAR: GT_RETURN[], MSG.
ENDFORM.                    " SLALE_UPLOAD_DATA
*&      Form COMMIT_MM
      text
--> p1        text
<-- p2        text
FORM COMMIT_MM .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT   = 'X'
      IMPORTING
        RETURN = GT_RETURN.
clear:      GT_ORDER_ITEMS_IN[],GT_ORDER_CONDITIONS_IN[].
ENDFORM.                    " COMMIT_MM

BAPI for Sales Order Creation.

Hello gurus,
I want to create a sales order using BAPI.
I have tried some BAPI's like BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPI_SALESDOCU_CREATEWITHDIA.
But I am not able to update the Miscellaneous Information like Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
Is there any other BAPI thru which i can update these fields while creation of Sales Order.
The Fields which I can provide to BAPI as import parameter is:
Order Type(VBAK-AUART),
Contract(VBAK_VGBEL),
SALES Org (VBAK-VGORT),
Dist Channel(VBAK-VTWEG),
Division (VBAK-SPART),
Open Quantity (VBAK-KWMENG)
Plant(VBAP-WERKS)
Storage Location (VBAP-LGORT)
Mode of transport(VBAP-OIC_MOT), Forwarding Agent(VBAP-OIC_LIFNR), Base Location(VBAP-OIA_BASELO), Truck Number(VBAP-OIC_TRUCKN), Pipeline trip No.(VBAP-OIC_PTRIP), Pipeline operator´s external batch number(VBAP-OIC_PBATCH).
Thanks In Advance,
Points will be rewarded for Best Solution......
Yogesh Sharma

hi,
I can give u a suggestion .. try it ..
its a quite a long process....
in BAPI_SALESORDER_CREATEFROMDAT2
there is a table EXTENSIONIN...
here u can add append structure and carry on ur sales order creation
Follow the process
Customer Enhancement for VBAK, VBAP, VBEP
Description
You can use this parameter to transfer user-specific enhancments to a BAPI. The customer has to complete the EXTENSION structure and the system automatically continues processing it. If you have not defined any user-specific fields, then you can transfer a blank EXTENSIONIN structure.
Technical information about Customer Enhancements
The following description uses an example to explain how to proceed with customer enhancements to the SD tables VBAK, VBKD, VBAP and VBEP.
The customer has added their own fields to table VBAP using the INCLUDE structure CUTEST. This structure contains 2 fields:
CFIELD1, CHAR 10
CFIELD2, CHAR 3.
The customer also requires that these two fields can be maintained with the BAPI.
1. Maintain structure CUTEST in table VBAP
2. Because the BAPIs work with checkboxes, you must also define a CUTESTX checkbox for the customer structure. It should be structured like this:
Field name       Data element
CFIELD1            CHAR1
CFIELD2          CHAR1
3. Define these customer structures in the structures VBAPKOZ und VBAPKOZX using INCLUDE or APPEND.
4. Add the customer structures to the BAPE_VBAP and BAPE_VBAPX BAPI structures using the APPEND technique.
5. Adjust the following structures for customer enhancements to table VBAK:
a) VBAKKOZ
b) VBAKKOZX
c) BAPE_VBAK
d) BAPE_VBAKX
6. Adjust the following structures for customer enhancements to table VBEK:
a) VBEPKOZ
b) VBEPKOZX
c) BAPE_VBEP
d) BAPE_VBEPX
7. Generally, the data should be added to the BAPI interface in the internal communication structures (VBAKKOM, and so on). There, you can process the data in the SD tables (VBAK, and so on).
8. If the EXTENSIONIN parameter contains customer data, you must complete at least the key fields in the relevant standard parameters.
For example:
You want to change customer field VBAP-CFIELD2 for item 20 to "XYZ" in order 4711.
The following entries are expected:
Import:     BAPIVBELN-VBELN       = '0000004711' Document number
            BAPISDHD1X-UPDATEFLAG = 'U'           UPDKZ for doc header
Tables:     BAPISDITM-ITM_NUMBER = '000020'      Item number
            BAPISDITMX-ITM_NUMBER = '000020'      Item number
          + BAPISDITMX-UPDATEFLAG = 'U'           UPDKZ for item
You must complete the EXTENSION table as follows:
STRUCTURE                          VALUEPART1       1234561234567890123
BAPE_VBAP                       0000004711000020                 XYZ
BAPE_VBAPX                      0000004711000020       X
Further Information
You can find more information in the BAPI programming guide in the chapter for enhancements to BAPIs.
Notes
You must complete the STRUCTURE field with the name of the relevant enhancement structure (BAPE_VBAK, BAPE_VBAP, BAPE_VBEP). You can complete the remaining fields with the append structures from the enhancement structures.
At the moment, you can use the BAPI to store enhancements in the following structures:
VBAK : An enhancement to header data requires an append structure to BAPE_VBAK and an enhancement to structure VBAKKOZ.
VBAP : An enhancement to item data requires an append structure to BAPE_VBAP and an enhancment to structure VBAPKOZ.
VBEP : An enhancement to schedule line data requires an append structure to BAPE_VBEP and an enhancement to structure VBEPKOZ.
VBKD : If you are using an enhancement for header data, you must add an append structure to BAPE_VBAK. You also need to enhance structure VBAKKOZ. If it is for item data, you need to add an append structure to BAPE_VBAP. You must also enhance structure VBAPKOZ.
If you also want to work with checkboxes, each X-structure must also contain an append structure.
For example:
A customer has created an order and wants to include the material long text (50 digits long).
The EXTENSIONIN structure must be completed with BAPE_VBAP. Two fields have fixed definitions in this structure. These are in the VBAP host key (VBELN, POSNR). The customer sets up an append structure that contains field ZMAT50.
Because the VBELN is normally blank when you create an order, the data can look like this:
STRUCTURE   |BAPE_VBAP
VALUEPART1 |          000010Customermateriallongtext50
              VBELN     POSNR ZMAT50

BAPI for Sales Order Creation from Third-party Application

Hi,
I need to create a Sales order in a SAP system from a third-party applications. Please provide the list of BAPIs/Interfaces that are involved in creation of Sales Order.

Hi,
Check this link, explains step by step.
http://abaplovers.blogspot.com/2008/02/bap-sales-order-create.html
Thanks,
Krishna

LSMW-BAPI Sales order creation

Similar Messages

Maybe you are looking for