Lsmw-batch input

Hi all..
Am uploading vendor master using lsmw-batch input method..when there s one record in my flat file its working fine.. But when i give more than one record its throwing some errors and i cant create the session.. can any one help me regarding this...
Points will be rewarded generously...
Thanks and regards
Ashu

hi mrutyun..
the structure relations are correct since it works fine if i have only one record..
Am using the transaction XK01 for uploading.. Its reading all the records and converting perfectly..it shows error like
Trans. 1 record 2: Table BLFA1 was transfered more than once its like a warning message and i cant process the session..
its saying like <b>EDITING TERMINATED</b>

Similar Messages

  • Problem about House Number of Vender Transfer by using LSMW+Batch-Input

    Hi,
    anyone has met the same problem?
    by using LSMW+Batch-Input method to transfer vender data the field House Number cannot be added.
    Object: 0040 Vendor Master
    Method 0002 Shared
    Program Name RFBIKR00
    Program Type B Batch Input
    Thanks in advance!

    in Vedndor master LSMW batch input method there is no field for House Number , we have only one filed
    (STRAS)for street and house numner in LSMW.
    first create the vendors after that update through XK02
    for this you can write program small LSMW recording  method
    using below fileds
    LIFNR                          C(010)    Vendor
    BUKRS                          C(004)    Company Code
    STREET                         C(060)    STREET
    HOUSE_NUM1                     C(010)    HOUSE_NUM1

  • Customized LSMW (Batch Input Recording) to upload data for Vendor

    Hello Fiends,
       can u help me on this object and how to upload in xk01.
            Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
    With best wishes,
    Chandu.
    Point will be rewarded....

    Hi,
    Go through the following link, you will find your answer
    http://www.sapbrain.com
    Regards,
    Bhaskar

  • Lsmw (batch input recording)

    explain step by step procedure for uplodig master data through lsmw (batch input recording) method. please explain settings for auto field mapping in 5th step

    Hi Neela,
    These are the steps to be followed while doing a Batch Input Recording.
    LSMW STEPS (Batch Input Recording)
    1. Maintain Attributes:
    Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
    2. Maintain Source structure:
    Create a structure name
    3. Maintain Source field:
    Create a structure like the Input File
    eg:
    Name - LIFNR
    Description - Account number or Vendor Number
    4. Maintain structure relations:
    This will link the structure to the input file.
    5. Maintain field mapping and conversion rules:
    You can choose the Auto Filed Mapping under Extras Menu. Yopu can also do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
    6. Maintain field mapping and conversion rules:
    If you have any fixed values you can define here.
    7. Specify files:
    Specify the input file path and type.
    8. Assign files:
    This will assign ur file to the Input file
    9. Read Data:
    This will read ur data from teh file.
    10. Dispaly Read Data:
    You can see the uploaded data
    11. Convert Data
    This will convert the data to the corresponding format for processing
    12. Display Converted data:
    13. Create batch input session
    Here this will create a batch input session for processing
    14. Run Batch Input session:
    By clicking on the session and process (Back ground or Display Errors)
    Refer the Below Links
    http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
    /people/hema.rao/blog/2006/09/14/lsmw--step-by-step
    http://help.sap.com/bp_blv1500/BL_US/documentation/LSMW_EN_US.doc
    http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
    http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
    http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
    http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
    http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
    http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
    Reward Points if Useful
    Regards
    Gokul

  • LSMW Batch Input Recording for Create BOM

    Dear All,
    I want to do LSMW for Creating BOM using Batch Input Recording,
    I know that i have to make 2 time Recording, first for the BOM Header and second for the BOM item
    For the BOM header i have done it, but for the BOM item i got some trouble with the item number (POSNR),
    when i run the LSMW, for the first item (item 0010) was success, but for the item 0020, it can't work and i got error
    message " NO BATCH INPUT FOR SAPLCSDI 0150"
    How is the recording step by step for BOM Item so the Item number can increase well?
    Very need your help,
    Regards,
    Marufat

    Hello Santosh,
    Thanks for the reply,
    I already check in SM35 where i also thought that the main problem is about adding the new item number,
    but when i tried to do repeat recording, i can not find any entry for adding the line item, so the line item after 0010 cannot be input
    Is there any solution?
    Regards,
    Marufat

  • LSMW: Batch Input for modified XD01?

    Hey!
    I want to import some customers data via LSMW, however we are using an add-on in our R3. For this reason I recieved the message: 'Old data BKNA1 cannot be processed, ADD-ON exists', when I tried to create the batch input session. All the steps before were fine. The modification of xd01 is just one button to add some additional information. Do I have to record the whole batch input session on my own again or does anyone knows an other opportunity?
    kind regards

    Guess you need an end of record marker in field SENDE (BKNA1):
    End of record marker:                                                                               
    If a batch input structure is later extended, the new end of the structure is indicated by a special field (SENDE). If you are already   
    working with the new, extended structure, you must also supply this     
    field with the NODATA indicator when "initializing" the structure. As a 
    result, the system can recognize whether the data is based on the old or
    the new structure when the structure is imported.                                                                               
    Old structures can no longer be processed and the system terminates with
    an error message if the following prerequisites are fulfilled:                                                                               
    o   You are using the modification-free enhancement of the customer/vendor master either directly or indirectly via an SAP solution.                                                                               
    o   Either you or an SAP solution extends the structure.

  • LSMW- Batch Input session getting error

    Hi All,
    I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
    Please let me know why this is happening.
    Thanks in Advance,
    Savitha

    Hi,
    Detail Error Message is as follows:
    No batch input data for screen SAPLIMR0 1110
    Message no. 00344
    Diagnosis
    The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
    Possible reasons:
    1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
    2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
    3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
    System Response
    None.
    Procedure
    For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
    For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
    For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
    Regards,
    ababfk

  • LSMW Batch input  session issue

    We have LSMW project for changing material BOM, object 0030, method 0002 and program RCSBI020 type B. I am passing header and items file. All the steps works until session creation. At session creation step it is just displaying the list of material and doesn't show any session generated.
    In what scenarios usually LSMW doesn't create the sessions? Any help would be appericiated.

    It seems that LSMW always use B (Batch Input). Try running the program RCSBI020 directly, I think you have the option not to create BI (the "Create folder" checkbox must not be selected).
    Thanks & regards,
    Hadiman

  • LSMW, batch input recording, structured file

    Hello,
    I'm new with LSMW.
    Is it right that with LSMW when used in batch input recording, it is impossible to use a structured file, with a header and with many item for exemple ?
    ( i try to do that with a financial transaction like F-02 )
    Thanks in advance for any help.
    (we are in WAS 6.20, LSMW 4.0 )
    Denis

    hai
    can any one help me how to handle lsmw with two structures  header & item data structures
    how can i map the target structures to source structures
    for example target recording structure have  ematn_01
                                                ematn_02
                                       how to map these 01 and 02 to source structures
    i have to take two source fields as ematn_01 & ematn_02
    or i have to map only one source ematn to all emant_01
                                                       _02
                                                       _03
    if there are n ematn's in that case how to map dynamically

  • Getting error while uploading gl master data using LSMW batch input data

    Hi Experts,
    I am getting error while uploading the GL master data through lsmw using batch input recording.
    After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
    and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

    Hello,
    Kindly post in the FI forum to get a better response.
    Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
    Kind Regards // Shaubhik

  • FK01- Vendor created using LSMW (batch input recording)

    Hi,
    I have created an LSMW for Creating vendor. While doing the recording I gave the telephone number 2 TELF2 dield also. But when I upload the vendors, that field is coming blank. Is there any specific reason for that? Appreciate your help.
    Thanks and Regards
    Madhu Vutukuri

    HI,
    Check the fields you have created in 'Source Structure and file you are attaching columns' if it exactly matching then check in 'Maintain Field Mapping and Conversion Rules'.
    Try once and assign points if useful.
    Sarma BH

  • LSMW : error message when ru batch input

    Hi,
    i want to integrate some FI docs with LSMW, when i run the Batch input i have this error : Choose valid function.
    Any idea to solve that.
    full points will be assigned.
    Regards

    Hi Mark,
    Welcome.
    This is lsmw batch input error.while  uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
    Fix the error using logs.
    thanks
    karthik

  • Editing is terminated message when running batch input error using lsmw

    Any Idea why would I get the info message like
    "Editing is terminated message when running batch input error using lsmw"
    please suggest where to look at.
    Thanks,
    Edited by: mark_yellow mark on Jul 1, 2008 3:27 AM

    Hi Mark,
    Welcome.
    This is lsmw batch input error.while  uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
    Fix the error using logs.
    thanks
    karthik

  • 'S' message in BDC and message of type 'A' in batch input session

    We have to upload data for ABZON transaction of assets. When we use LSMW with recording method and try to upload say 3 records. All teh records are updated successfully but the batch input session log says last two records with a message of type 'A' "leave transaction is not possible in batch input"
    But when we upload the same data with BDC program with call transaction then teh log shows same message with type 'S'.
    what could be the reason for this?
    Though data gets uploaded successfully the 'A' message is being displayed in LSMW batch input log.
    if anyone has encountered a similar problem pls let us know how to resolve this asap.
    Thanks,
    Simmi

    Did your batch input end with save ( /11 ) or what ok_code are you using ?

  • Problem in batch input method

    Hi wizards,
    please help me for the following problem:
    I have created a parent recording for MATERIAL MASTER in LSMW batch input method by selecting all of the fields that may be required for different material types.  Now I want to edit the recording and create new recordings from the parent one for specific material types.  For this, i have made a copy of the same recording with a different name in the same project.  In the copied recording, i have kept only the screen fields which i require for a particular material type and deleted the rest. I have created new structure relationships and field mapping rules for the new recording. Now when i upload the data, system is behaving normally upto the DISPLAY READ DATA stage, but gives a short dump on CONVERT DATA. On inspection i have found that during FIELD MAPPING, the _source field mapping is still showing mapping with the source structure of the parent recording for fields which have mapping rule as "Transfer" but it is picking up the new source structure for those source fields for which mapping rule is "Constant"_.
    Kindly help me solve this problem as i do not want to create a separate recording for each material type. Can creating a new subproject help in this regard?
    Thanks and regards
    Abhik

    Hi Harris,
    could you please let me know how to use the two methods you have mentioned? If you have any docs regarding the same then could you please mail it to me at [email protected]? Or else if you have any link for the same then please do send it to me.
    However, I would like to know that if separate recording is required for every material type, then why the "COPY RECORDING" and "DELETE SCREENFIELD" utilities have been provided.
    Thanks and regards
    Abhik

Maybe you are looking for

  • Error while accessing Scheduler Tab on xmlpserver

    Hi all While trying to schedule a publisher report,we are getting the following error java.lang.NoClassDefFoundError: oracle.xml.parser.v2.NSResolver at java.lang.J9VMInternals.verifyImpl(Native Method) at java.lang.J9VMInternals.verify(J9VMInternals

  • Unable to install adobe Flaah player

    Hello, I am new to this so bear with me, I am on my laptop with Internet 7, and windows 64 bit I was uable to install adobe flash player.  I was getting all flags from you tube and my on line school that I needed to update my flash player.  So I went

  • Count Substring in String

    Is there any way you can count the number of substrings in a string using Coldfusion? E.g. haystack = 25fdjkkjlafjkl25alksdfjaafdjk25sl needle = 25 result = 3

  • How to resolve error 50103

    Dear All I am trying to collect data from two sensors. Both sensors ouput is Analoge Voltage. My purpose is to acquire data from both sensors and then plot thier waveforms, multiply both waveforms and get FFT. The error coming is 50103. The immage of

  • Country Grouping does not exist for tax year 2012 01

    I get this error when simulating payroll for period 01 in tax year 2012. I use the South African payroll.