LSMW Customer Master text load- screen to small

Hello!
I am loading customer texts via LSMW.
Some of the texts are very long (up to 29 paragraphs/lines), though during LSMW batch run, the screen shows only 20 paragraphs/lines, so 21 onwards are not loaded...
How to expand the quantity of lines so it is eg 30 on the screen?
Thanks!
Cheers
Bea

Hi,
You can try to increase the resolution of your screen and make the screen to look smaller.
Or you can try to use FM 'SPLIT_TEXTLINE' to split those text which cant upload to your master data.
Thanks.

Similar Messages

LSMW for Customer master text upload

Hi
I would want to upload the customer master text using LSMW. I see a message type /DSD/HH_CUSTMASTEXT (Customer master additions) being available.
has anybody used this for text upload??
I am not sure how it works, i dont see the provision to enter the text unlike the "SAVE_TEXT function module.
If any one of you have used it, kindly let me know.
Thanks
Manju

Hi Srinivas,
yes we could do the text upload using direct input method. I need to invoke it from web methods, it would be difficult with direct input method and hence i was looking for using IDOC's.
Regards
Manju

LSMW Customer Master Error

I am getting the following error in LSMW customer master master load in LSMW for only some of the records.
Field KNVV-WAERS. does not exist in the screen SAPMF02D 0310
Any one now the solution

Hi
Make sure you have mention the Currency in your screen or data.

In LSMW Customer master standard program.....

I have problem in LSMW customer master data creation.I have used LSMW standard program
object : 0050
method : 0000
prog.name : RFBIDE00
PROGTYPE : B
but upto Dispaly converted data all the steps are wrking fine..
but In the step13: Create batch input session, I am getting error message.
like "Editing was terminaterd"
kindly guide me on this..........

hi
chk this:
/message/3216495#3216495 [original link is broken]
regards,
madhumitha

Customer Master text replication

Hi all,
does anyone know if it is possible to replicate R/3 customer master texts across to CRM via the standard customer master replication to CRM?
regards
Jens

Hi Jens,
Yes, it's possible.
At R/3 side, using t-code SM30, configure table vision V_CRMTXTID to map the customer texts ID's of R3, with the CRM ones.
Something like this (entry example):
KNA1 0002 'some description' -> BUT000 0002
Kind regards,

Mass load of customer master texts

Hi!
I need to load texts to the customer master sales texts. It is too much to do it manually.
How can I do it? Is it any LSMW solution for that?
Thanks!!
Bea

Hi Beata,
Yes, you can do it through LSMW.
You can use FM CREATE_TEXT.
Hope it helps.
Regards,
MT

LSMW Customer Master Load

Hi,
I´m using standard batch input object 0050 (customer master) to upload customers to the system.
I now have the problem, that it´s working in foreground, but not in background. In foreground, I´m
getting a warning, that the field KNA1-BRSCH does not exist on screen SAPMF02D 0120. As I have
seen, the field comes on the next screen, and when I press enter, it´s filling that field there. So in the
end, I can run the batch input in foreground.
But in background it´s always stopping because of this message. But as it is standard batch input,
it shouldn´t come up, right?
Does anybody have an advice for me, what to do?
Is it possible to let the batch input session run in a state, that it ignores warnings and just stop at
errors?
Thank you for your help!

The field was suppressed by customizing, and because of that, the error occured...

Customer Master Text data label display in BEx query

Hi,
In my query output i have the customer number and its text displayed. The data comes from customer master infoobject.
But the label is displayed only for customer number.
But I need the label for text also needs to be displayed.
Kindly let me know is there any possibilities to display the label for the text.
Regards,
Indhu

Hi Induja ,
For 0CUSTOMER , name attribute is there so it will work fine, for others like 0MATERIAL, 0COMP_CODE etc. you can follow the steps which i have posted in above reply.
Use the same steps for 0Material, creation of Z- infoobject with reference char. of 0Material.....
Create one custom 'z' InfoObject lets say ZCUSTOMER with Reference Characteristic of 0CUSTOMER and add it to the data target, map it with same field for which 0CUSTOMER is mapped and load data into target (DSO, cube) or if you are reporting on multiprovider then assign it.
Because ZCUSTOMER is created with reference of 0CUSTOMER and mapped with the same source field , ZCUSTOMER will act as copy of 0CUSTOMER.
In query designer drag 0CUSTOMER and ZCUSTOMER. change display setting
0CUSTOMER display as Key only
ZCUSTOMER display as Text only.

Customer Master Text Information !!!!

Hi Folks,
I have a quick question on the maintenance of the Text at Customer master records. The question in paint here is that;
1. Can we use bring the free text maintained at Customer master level in the different reports like SQVI, ABAP reports?
2. Is there any standard report by which you can pull the text maintained at customer master level (General, Accounting and Sales area text)?
Please do let me know and if yes can you please provide me the transaction code and data base tables for this.
Thanks and best regards,
Sandy

Sandy,
I will give you example using function module READ_TEXT. You can test this by running this in SE37, hit the test icon. Parameters to be filled in as follows ...
-> Client, e.g. 010
-> ID, the text ID in your text procedure, e.g. 0001 or Z001, etc.
-> Language, e.g. EN
-> Name, e.g. the text name, can find this in table STXH-TDNAME, in my example it was the customer number, e.g. 0000105036
-> Object, e.g. closely tied to the 'Name', in this example as I was dealing with customer text at general data level, e.g. KNA1 (table)
The result here is that I am asking the function module to read text object 0001 associated with customer 105036 at the general data level of the customer for language key EN.
So, need to understand what level you have your text stored at. General data (KNA1)? Company Code (KNB1)? or Sales Area (KNVV). This will define your 'Object'. You can pick up the text ID from your text procedure, and you will no the text name via the customer number. You can double check most of this in table STXH first before you test example in the function module.
Once you have working example, you could then relay spec to your ABAP team to build program with selection screen that runs this function module. I do not think you can achieve any of this via SQVI or SQ01. There are calls to includes inside of the function module, and I believe these includes are performing the reading and converting the 'Data' in table STXL.
Review with your ABAPer, and let me know if you need more. Just revert back.
Thanks,
Jay

LSMW - Customer Master & BAS

Hi!
We are trying to load a Customer Master file from a flat file using LSMW and Data Transfer Workbench to load the address data in BAS (since we need to access some extra fields like email address). The problem is that LSMW also creates a new address in BAS so how do we associate the address created by Data Transfer Workbench to KNA1? Do I need an ABAP program and functions ADDR_ADOWNERREF_READ and ADDR_ADOWNERREF_DELETE? Do I then just write over the value in the KNA1-ADRNR field with the value created by Data Transfer Workbench? Can this be done automatically using LSMW?
Thanks,
Tony.

Hi Tony,
I know you have posted this a long time ago but were you able to figure this out?
If you were, can you please help me with this.
Thanks,
Kevin

Customer Master Text object extract

Hi Guys,
I am working migration of Customer master data from 3.1i systems to ECC 6.0 systems. So can you please help how i can extract and migrate the Text objects for the Customer master which is maintained in the tables STXH and STXL.
Regards,
Vinnie

hi,
Each text is maintained in Text id's, so you can ask your abaper to pick up the date from that text id and store it in a Ztable, then copy or import the same in ECC6.0 version and update at customer level.
Regards,
Sudhir

Customer Master Text Fields

Hello,
What tables and relations would be used to access the customer master sales data short and long text fields in an SQ01 query?
Thanks for your reply.

Hi,
I think KNVV would be the starting table and the text tables would be related to KNVV. When doing an F1 on the short and long text fields I get RTEXT-TTEXT and RTEXT-LTEXT but these can't be used in an SQ01 query.
Regards

Invoice SAP SCRIPT is not printing Customer master text.

I was given a SD-invoice# XXXXXXXXX, which has problem with in it's SAP SCRIPT --> is the text is taken from "customer master data head office text" is not printed on the SCRIPT out put.
1). What I don't understand by going to /nvf03 --> by giving invoice number , then how can I view the script output ?
The text is supposed to print in footer ...however the coding inthe FOOTER window is
/: INCLUDE 'Z_FOOTER_SO_4700_INV' OBJECT TEXT ID ADRS LANGUAGE 'IT'
So, do I need to add coing for text of customer master data ?
Any idea about text and field name ?
THANKS IN ADVANCE.

Hello,
To see the output go to /VF03, enter the billing document number but don't press enter. Go to Billing Document in the menu bar, Issue Output to, select a line and do a print preview (if there's nothing there, the doc hasn't been printed before).
To print the text, ask somebody to navigate to where it is in SAP. Double click on it, choose Got -> Header. This will give you all the information you need for the INCLUDE.
The INCLUDE statement you have is for a standard text (trans: SO), not the "customer master data head office text".
Michael
Edited by: Michael Evershed on Sep 26, 2008 10:41 PM
Edited by: Michael Evershed on Sep 26, 2008 10:41 PM

LSMW : Customer Master upload

hello,
i am uploading customer master data using the standard object : 0050 and program : RFBIDE00.
I am trying to upload data like Street2, street3 and street 4 which can be viewed in the street address drop down in transacction XD01/02. In my lsmw i am using the mapping for these fields in the structure BIADDR2 where the fields i mapped to are str_suppl1, str_suppl2, str_suppl3.
but when i try and upload data i do not get these fields updated even though i have given them in the upload file.
Please can anyone tell me the reason why it is doing so?
Thanks and Regards
Swanand

Hi Swanand,
We have done the customer master upload using LSMW but with the IDoc variant (message type DEBMAS). You can upload all data you need using this IDoc.
Regards,
John.

Custom Master Text Tables

Hi,
I'm creating a customer master report and having problem determining the text tables of some fields:
a.) Sales Region
b.) Sales Office
c.) Customer Group
d.) Delivery Priority
e.) Shipping Conditions
f.) Delivering Plant
g.) Partial delivery per item (Complete delivery indicator)
h.) Terms of payment
i.) Acct assgmt group
Appreciate any helpful hints.
Regards,
Mawi

currently, i dont hv SAP access, so, just am answering generically,
- you can get them with check tables relationship, in either SE11 or SE16
- use WHERE USED LIST of that particular field, then pick the table, which possess the T in the last position of the name
- also check, VALUE TABLEs at domain level in SE11
thanq
Edited by: SAP ABAPer on May 6, 2009 4:40 AM

LSMW Customer Master text load- screen to small

Similar Messages

Maybe you are looking for