LSMW Direct Input Inspection Plan Not Writing Inspection Char File

Hello Experts,
I am using Direct Input Program RCPTRA01 to Load Inspection Plan.
Created 3 structures - Inpection Plan/Operations/Inspection Characteristics one below the other in that order.
We have a internal numbering system for assigning Group to Inspection Plan.
I defined GROUPID column in Maintain Source Fields Inspection Plan/Operations/Inspections characteristics structures and set "Identifying Field Content" as 1.
When i read data - program is reading inspection plan and operations. But it is not writing Inspection Plan file.
What am i missing. Spent quite a bit of time trying to figure out what i am missing.
Any help is appreciated.
Thanks in advance
Thanks

Hi,
I have exactly followed the same thread.
1. I have actually maintained 3 files, but when reading it takes only the header file.
2. When Creating input session I an getting a error,
No profile with entry tool for task list / 3 in session INSPLAN
Regards
Subbu.

Similar Messages

Reg:lsmw(direct input)

hi friends,
i need your help in lsmw direct input method.
my problem in my flat file one header and multiple header lines.
how to handle in direct input method.

Hi,
At "Maintain Source Structures" you need to define two structures. One for header and one for item.
HEADER_STRUCTURE
|___
       ITEM_STRUCTURE
At "Maintain Source Fields" you need to define one field as identifier at first field of the structure. Double click at the field and fill "Identifying Field Content".
Then the source file could be specified as below.
H     100965
I     1     Test 1
I     2     Test 2
I     3     Test 3
I     4     Test 4
H is the identifying field content for header and I for item.
Regards,
Teddy

Create Inspection Plan -LSMW -Direct Input -Error with Control Indicators

Hi,
I am creating Inspection Plans using LSMW-DIRECT INPUT Method.
Although MIC's control indicator parameters are correct while creating a plan it is changing the control indicator parameters.
how can we suppress this?
I want to use MIC's default parameters.
Regards
Praveen

have Lost Previous File
what does that mean? did they lose the source that should be used to load the data from?
without source you cannot load data.
Had you ever got this source file? how? by mail, then check your old mails and take it from there, ask the sender to he/she checks the SENT folder in his mail system. Maybe someone has a local copy of this fille.

Fields mobile no, house no is not there LSMW direct input customer master

Hi All,
In LSMW direct input method for customer master(RFBIDE00) fields mobile number, house number is not available. But field street(STRAS) is available there is no field like house number .
How to proceed futher. please let me know the suggestion . It's is urgent.
Regards,
Karthik.

1) read documentation to rfbide00 with se38
2) if you want to use the new adress-fields from table adrc you must use bapi or bdc to xd01
A.

Problem while Creating BOM using LSMW Direct Input

Hi all ,
I am trying to create the BOM Using LSMW Direct Input Method .
I am getting problem at step 9 that is Read Data.
It is able to read the values from header and item files .
but it is not able to write , so the Written is 0 always .
I put the field names first in the flat file and correcponding values below it with tab delimited.
Please let me know where the Problem would be.... I am trying this from long time ..
Regards ,
Raj

hi ,
Yes i am specify files i am attaching 2 files .
ones is header and the other is line item data .
my strucure is :
Hi ,
I am still getting problem while for writing the records after reading the data .....
my header structure :
STYPE
MATNR
WERKS
SELAL
STLAN
DATUV
ZTEXT
my item structure :
STYPE
MATNR
WERKS
SELAL
POSTP
MENGE
my header data :
STYPE     MATNR     WERKS     SELAL     STLAN     DATUV     ZTEXT
1     388     0110     20     1     06.01.2009     SAMPLE ZTEXT
my item data :
STYPE     MATNR1     WERKS     SELAL     POSTP     MENGE
1     388     0110     20     N     1234
1     382     0110     20     N     12345
Above text files are delimited by tabulator.
Please guide me . The files are reading but unable to write .....
Regards,
Raj

LSMW Direct Input Method - Change Documents

Hello experts,
Could anyone please tell me how to enable the change documents(not just runtime) for LSMW direct Input method? There is also one option "Change Documents" in the last step of the process, will this write into any table that I see the changes later If I run the last step with selected this option? If yes, What are the application (customer master data, vendor master data, material master data, etc) specific tables?
Is there anyway that I could populate this method changes into the CDHDR & CHPOS tables?
SAP documenation on this:
To enter the data into the *corresponding database tables directly*, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism
http://help.sap.com/erp2005_ehp_04/helpdata/EN/fa/097174543b11d1898e0000e8322d00/content.htm
Since this tool writing data into database tables directly skips the CDHDR & CDPOS recording..
Is there any other possible way for the complete change logs (change pointers???)? ( Or only table logging?)
Please share your experience on this.
Thanks,
Himadama

No response received..

LSMW - Direct Input Method - AS91 - RAALTD11

Hi All,
I am trying to master data upload of assets into SAP. I am doing it using LSMW - Direct Input method.
I am getting a lot of errors:
- No valid cost center was entered --- Whereas the cost center entered is valid.
- Unexpected record type: B --- whereas I have not specified any record type.
- Company code 0315 already contains assets in the number range T4 --- Whereas I have run the LSMW only for company code 0312 and with just a single record.
- And many more such errors.
Please advise if I am doing something wrong.
Also I want to know to which field shall I pass the Cumm Acquis Val and the Net Book Value.
I want to know the corresponding fields in the BALTD and BALTB structures for these fields.
My flat file contains the below fields:
- ANLKL    Asset Class
- BUKRS   Company Code
- TXT50     Description
- AKTIV    Capitalized On
- KOSTL   Cost Center
- ORD42    Allowed Capital Allowances?
- EAUFN   Investment Order
- NDJAR   Planned Useful Life in Years
- NDPER Planned Useful Life in Periods (months)
- NDABJ   Expired Useful Life in Years
- NDABP Expired Useful Life in Periods (months)
- ??    Cumm Acquis Value
- ??    Net Book Value
I don't know how to map the last two fields. Although I could find another field ANBTR01 in BALTB structure. But then which field tomap to this structure and to which field shall I map the remaining one.
Please advise.
Thanks & Regards,
Namrata

Hi All,
I have now removed the BALTB structure and am filling only teh BALTD structure. I am not getting any errors and the asset is getting created.
But when I go and check for the asset in AS93 / AS92, the depr areas (planned and expired life in years and planned and expired life in periods) are not getting populated in SAP. Also in the Takeover Values tab, ***.acquis.val and the Net book value fields are not getting populated.
Below is the mapping of all the fields:
BALTD-MANDT = 600 (GETTING POPULATED ITSELF)
BALTD-BUKRS = SOURCE-BUKRS
BALTD-ANLKL = SOURCE-ANLKL
BALTD-TCODE = AS91 (HARDCODING IN LSMW)
BALTD-RCTYP = A (GETTINGPOPULATED ITSELF)
BALTD-AKTIV = SOURCE-AKTIV
BALTD-ORD42 = SOURCE-ORD42 (ALWD)
BALTD-EAUFN = SOURCE-EAUFN
BALTD-TXT50 = SOURCE-TXT50
BALTD-KOSTL = SOURCE-KOSTL
Below are the dep areas fields values and the takeover values.
BALTD-NDJAR01 = SOURCE-NDJAR01 (PLANNED LIFE IN YEARS)
BALTD-NDPER01 = SOURCE-NDPER01 (PLANNED LIFE IN PERIODS)
BALTD-NDABJ01 = SOURCE-NDABJ01 (EXPIRED LIFE IN YEARS)
BALTD-NDABP01 = SOURCE-NDABP01 (EXPIRED LIFE IN PERIODS)
BALTD-KANSW01 = SOURCE-KANSW01 (CM.ACQUIS.VALUE - IN TAKEOVER VALUES TAB)
BALTD-KANSW02 = NET BOOK VALUE IN TAKEOVER VALUES TAB.
BALTD-WRTMA = SOURCE-WRTMA (SUGGESTED BY SOMEONE ON SDN FOR NET BOOK VALUE)
None of the above dep areas and takeover values fields (fields in bold) are getting populated in SAP.
Please help and advise how to proceed with this.
Regards,
Namrata

LSMW(Direct Input) Material master issues

Hi,
I have few issues on Material master-LSMW(Direct Input-RMDATIND) data upload(creating materials).
1. Can i upload excel sheet for uploading data! What option i have to choose in 'specify files' for this!
2. I am using fields MBRSH, MTART, MAKTX, MEINS, BISMT, MATKL, MAGRV for mapping.
    But when i tried to upload in last step-start direct input program with Lock Mode-'N' it is giving error as
    'Plant data does not exist'. Because this is for 'Basic Data' i though no need to input plant.
3. MATNR field is not needed for creation right as it is auto generated!
4. I have to do seperate object for this project for 'Sales organization data' & Plant Data is there any checks needed for the same!
Can anybody give solutions for the above!
Thanks in advance.
Thanks,
Deep.

1. Now i am trying to process 4 records it is creating 3 records.
    It is always skipping 1st record in flat file.
    Any check required!
2. Also i want to write a output file(log file) to my presentation/application server with all material no's created & material descriptions. Where can i do the same!
3. Can anybody tell me how to upload using excel sheet.
Thanks,
Deep.
Edited by: Deep on May 14, 2009 3:21 PM

LSMW - Direct Input - Sales order - item text

Hi,
I'm having a problem similar to the problem posted by Laurent Guilloteau on 2/3/2006 titled:
LSMW - Direct Input - Sales order - item texts
While this thread shows the issue as being answered, I'm not clear on what action to take.
I'm using an LSMW with program RVINVB10 to load sales orders to SAP.
I'm successfully loading the orders, including header level text, however the item text is not showing on the order.
I have source structures defined as follows:
Source Structures
       REC1                     VBAK - Header
           REC4                     VBPA - Order Partners
           REC6                     BTEXHKOM - Header Text Header
               REC7                     BTEXLKOM - Header Text Lines
           REC2                     VBAP - Order Items
               REC8                     BTEXHKOM - Item Text Header
                   REC9                     BTEXLKOM - Item Text Lines
               REC3                     VBEP - Order Schedule Lines
In actions 'Read Data' and 'Convert Data', I see text for the two text structures, at the header and item level. But after execution of Direct Input program, I don't see text in at the item level of the sales order, however I do see text at the header level.
Does anyone have any insight on what's causing the item level text not to show on the order?
Best regards,
Stuart

Hi all,
Many thanks for the suggestions. One of our expert developers got involved and provided the solution.
In order to have item level text populate, the VBAP-PSTYV (the sales document item category) field also needs to be populated. The VBAP-PSTYV field value is dependent on the sales document type. (Or, at least it is for the configuartion set up in my example) The sales document type is VBAK-AUART.
Stuart

LSMW Direct input method: 0150 Characteristics with Values

I am trying to upload several characteristics with Values using LSMW Direct Input method 0150.I have defined 2 level structure for Characetristic header and values. Have set the relevant indicators as 1 for characterisitc data and 2 for Values. I have set the T-code to CT04.I am trying to upload the data but only Characteristic data is getting generated and not the values. Can anyone help me out as to what may be the reason.
The fields I have in my uploading template is as below:
LINK     NAME     DESCRIPT     STATUS     FORMAT     LENGTH     DECIMALS     UNIT     WERT
1     TON     WEIGHT LIFT CAPACITY     1     NUM     8     0     ton
2                                        20
2                                        50
2                                        60
2                                        70
2                                        100
The Fields I have mapped in Source structre are:
Source Fields
        CHARACTERISTIC            PM Characteristics
            LINK                           C(001)    Identify Field Content:1
                                           Identifing Field Content: 1
            NAME                           C(030)    Characteristic Name
            DESCRIPT                       C(030)    Characteristic description
            STATUS                         C(001)    Status of a characteristic
            FORMAT                         C(004)    Data Type
            LENGTH                         C(002)    Number of Characters
            DECIMALS                       C(002)    Number of Decimal Places
            UNIT                           C(006)    Unit of Measure, Language-
            CHARACTVALUE              Characterisitc Values
                LINK                           C(001)    Identify field content
                                               Identifing Field Content: 2
                BLANK1                         C(001)    Blank1
                BLANK3                         C(001)    Blank3
                BLANK2                         C(001)    Blank2
                BLANK4                         C(001)    Blank4
                BLANK5                         C(001)    Blank5
                BLANK7                         C(001)    Blank7
                BLANK6                         C(001)    Blank6
                WERT                           C(030)    Characteristic Value
Source Structure is:
Source Structures
        CHARACTERISTIC           PM Characteristics
         CHARACTVALUE             Characterisitc Values
Structure relation is as below:
Structure Relations
        BGR00 Batch Input Structure for Session Data                       <<<< CHARACTERISTIC PM Characteristics
              Select Target Structure BGR00 .
            BIMST Batch input for characteristics                              <<<< CHARACTERISTIC PM Characteristics
                  Select Target Structure BIMST .
                BIMZW Batch Input: Allowed Characteristic Values                   <<<< CHARACTVALUE   Characterisitc Values
Can anyone help me resolve this issue.....
Thanks in advance
Murad

Hi,
Go through this links its might helpfull to you.
Re: Porblem during characteristics LSMW
Assigning Characteristics to a class using LSMW
Issues Uploading Characteristics Data into SAP Using LSMW
LSMW: CHaracteristics Load
Thank you,

LSMW direct input method - Equipment BOM

Hi Experts,
We have already written program for equipment BOM master in LSMW direct input method. I do not know about this direct input method.
Here they have maintained 2 source structures and relavant source fields. one for BOM header and other for BOM items. The first field they maintained is LINK in both the source fields. I really do not know what that field is all about. I checked in step specify files and found that they have previously mentioned two files, one for BOM header and other for BOM items. but when I tried to save in this step it gives me error that " No logical path specified". Can anybody tell me what is this error is all about.Please heip me to get out of this problem.
Thanks and best regards,
Praveen

Hi praveen,
LSMW does not accept two files.
In the step create source strcture
crte one structure with BOM header like with ZBOM_H.
Under that create another structure for item ZBOM_I.
ZBOM_H
ZBOM_I like this structure will will be.
In the step source fields.
crate onne variable with indicatoe header.While creating the variable we have field 'identify field content ' field in pop up screen 'H'.
assign all header files under identifier 'H'.
then under ZBOM_I create identifier with 'I'.
Assign all the item fields to this.
then map the fields.
In the file should be H header fields.
                              I item fields.
                              I
                              I.
Then Header .It should be like this.
in saptechnical u will get the examples go though them once.
Thanks

Lsmw direct input method for ct04

Hello Friends,
Im using lsmw direct input method RCCTBI01 obj 0150 method 000 for creating characteristics value.
In lsmw im getting erro at "specify file" stage as "no logical path has been specified. I have come to conclusion tht i have to define some logical path in FILE transaction code but im not clear what needs to be done .
Pls let me know how to define logical file path for ct04 transaction.
Regards,
Sunny

Hi,
First choose or create a directory by selecting say TMP as the logical file path and then click the assignment of physical paths to logical paths.Double click your operating system eg. UNIX then specify the directory followed by a generic filename e.g. /tmp/<FILENAME>
Now click logical file name definition and create a new name, say ZCT04_FILE give the logical path as TMP and then specify the file name e.g. CT04.TXT and the format ASC.
The file will then be created as /tmp/CT04.TXT
Regards,
Darren

Issue in LSMW(Direct Input) for FB01 with (RFBIBL00)

Hi All,
I am developing a LSMW-Direct input method for TCode-FB01 using program RFBIBL00.
I am using one file as input file. I have below fields in the file.
STYPE
BLART
BUKRS
BLDAT
BUDAT
MONAT
WAERS
KURSF
XBLNR
BKTXT
XMWST
NEWBS
NEWKO
NEWUM
WRBTR
KOSTL
PROJK
AUFNR
PRCTR
SEGMEN
MWSKZ
WMWST
ZFBDT
ZUONR
SGTXT
My Data is as below: (Single record) 1 - Header data, 2-Item data
1     SA     1123     01062009     01062009     6     USD          Test1     Testing
2                                                       40     100005          10                                             Test     Test
2                                                       50     100005          10                                             Test     Test
After 'Converted data' step it is displaying 7 rows instead of 3 rows for BGR00, BBKPF, BBSEG.
Is there any condition(logic) i need to write to make it to 3 rows.
All the data displayed above is for single record.
Because of this issue i am not able to create document through FB01.
How to solve this issue!
Thanks,
Deep.

you need to pass 2 strctures like below
1 is header and 1 is item
here INDENT is link between 2 files
in your case 1 record: BGR00,
1 record : BBKPF
2 records: BBSEG
its only 4 records, i think you file contains space for 3 more record you check that.
and also in the last step you have option for creating the batch input method, create BI and run in foreground ....
YFIC_HEADER           Header
         INDENT                         C(010)    Identifier
         BLDAT                          C(008)    Document Date
         BLART                          C(002)    Document Type
         BUKRS                          C(004)    Company Code
         BUDAT                          C(008)    Posting Date
         MONAT                          C(002)    Posting Period
         WAERS                          C(005)    Currency
         KURSF                          C(009)    Exchange rate
         BELNR                          C(010)    Document Number
         WWERT                          C(008)    Translation Date
         XBLNR                          C(016)    Reference
         BVORG                          C(016)    Cross-co. code no.
         BKTXT                          C(025)    Document Header Text
         PARGB                          C(004)    Trading part.BA
         XMWST                          C(001)    Calculate Tax
         LDGRP                          C(004)    Ledger Group
         YFIC_ITEM             Item Data
             INDENT                         C(010)    Identifier
             NEWBS                          C(002)    Posting Key
             NEWKO                          C(017)    Account
             NEWUM                          C(001)    Special G/L ind.
             NEWBW                          C(003)    Transact. type
             WRBTR                          C(015)    Amount
             MWSKZ                          C(002)    Tax Code
             XSKRL                          C(001)    W/o cash disc.
             KOSTL                          C(010)    Cost Center
             AUFNR                          C(012)    Order
             GSBER                          C(004)    Business Area
             PRCTR                          C(010)    Profit Center
             RASSC                          C(006)    Trading Partner
             FKBER                          C(004)    Functional Area

Upload sales text for material master using LSMW direct input method

Hello Experts,
I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR           LONGTEXT                                                     LINE
MATERIAL1    LONGTEXT FOR MATERIAL MATERIAL1       1
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT            Source structure for long text
Step 3-> Maintain souce file
Source Fields
ZLONG_TEXT             Source structure for long text
                       MATNR                         C(018)    MATNR
                       LTEXT                          C(132)    LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header                                           <<<< ZLONG_TEXT Source structure for long text
              Select Target Structure /SAPDMC/LTXTH .
/SAPDMC/LTXTL Long Texts: Row                                              <<<< ZLONG_TEXT Source structure for long text
             Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH                  Long Texts: Header
Fields
   OBJECT                Texts: Application Object
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTH-OBJECT = 'MVKE'.
   NAME                  Name
                                Source: ZLONG_TEXT-MATNR (MATNR)
                                Rule :   Transfer (MOVE)
                                Code:    /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
   ID                         Text ID
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTH-ID = '0001'.
   SPRAS                 Language Key
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL                  Long Texts: Row
Fields
    TEXTFORMAT     Tag column
                                Rule :   Constant
                                Code:    /SAPDMC/LTXTL-TEXTFORMAT = '/'.
    TEXTLINE             Text Line
                                Source: ZLONG_TEXT-LTEXT (LTEXT)
                                Rule :   Transfer (MOVE)
                                Code:    /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file
Legacy Data          On the PC (Frontend)
             Data                           D:\Sales_Longtext.txt
Step7 -> Assign File
ZLONG_TEXT Source structure for long text
              Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure             Read      Written        Not Written
ZLONG_TEXT              1                1              0
Transactions Read:            1
Records Read:                   1
Transactions Written:         1
Records Written:                 1
Step 8 -> Display read data
Field Name                    Field Text Field Value
MATNR                          MATNR      MATERIA1
LTEXT                            LTEXT      SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read:          ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written:       ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read:                 1
Records Read:                        1
Transactions Written:              1
Records Written:                     2
Step 10 -> Display converted data
1 /SAPDMC/LTXTH                   1MVKE      MATERIAL1                                                                   0001E
2 /SAPDMC/LTXTL                   2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench
Project:                              ZNRD_PRJ1       ORH
Subproject:                        ZNRD_SUBPRJ2    Upload long text
Object:                               ZNRD_LTEXT      Long text tru direct input
File :                                   ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total:                                1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts:                 0
Now when i check the material master sales view -> sales text it is empty.
Please help me with the same.
Regards,
Ranjith N

Hello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR             LONGTEXT                                              LINE
MATERIAL1     LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure
/SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT            Texts: Application Object
                         Rule : Constant
                          Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME               Name
                         Source: ZLONG_TEXT-MATNR (MATNR)
                         Rule : Transfer (MOVE)
                         Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID                     Text ID
                         Rule : Constant
                         Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS             Language Key
                         Rule : Constant
                        Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
                         Rule : Constant
                         Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE          Text Line
                         Source: ZLONG_TEXT-LTEXT (LTEXT)
                         Rule : Transfer (MOVE)
                         Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file Legacy
Data On the PC (Frontend)
             Data D:\Sales_Longtext.txt
Step7 -> Assign File ZLONG_TEXT
Source structure for long text
          Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure            Read                Written                Not Written
ZLONG_TEXT                  1                       1                            0
Transactions Read          1
Records Read:                1
Transactions Written:      1
Records Written:             1
Step 8 -> Display read data
Field Name             Field Text                      Field Value
MATNR                    MATNR                         MATERIA1
LTEXT                     LTEXT                            SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read:    1
Records Read:           1
Transactions Written: 1
Records Written:         2
tep 10 -> Display converted data
1 /SAPDMC/LTXTH     1    MVKE        MATERIAL1 0001   E
2 /SAPDMC/LTXTL     2/   SALES TEXT FOR Material       MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench Project:
ZNRD_PRJ1 ORH
Subproject:   ZNRD_SUBPRJ2     Upload long text
Object:          ZNRD_LTEXT          Long text tru direct input
File :              ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total:                                1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts:                0
Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
Regards,
Ranjith N

Error log table for LSMW-Direct input

Can any one tell me , What is the table for storing the error messages in LSMW-Direct input?
Regards,
Nagesh

for LSMW-Direct input method you can use EXCUTE IN BACK GROUND. the job is running and see the job name in SM37 . after completion of your job , select you job name and press the SPOOL button there you can find the you job error log.

LSMW Direct Input Inspection Plan Not Writing Inspection Char File

Similar Messages

Maybe you are looking for