LSMW-DIRECT INPUT PERMISSION ERROR
Hi
I am creating lsmw program for classification, it showing one error like 'no logical path has been specified' in specify files step. But i created logical path & file and when ever run the last step there have showing error like that " Logical file name XXXXXXX not permissible"
please help me.
Thanks
Ganesh
Hi
Showing the error like..
Logical file name 'Z_LOGICALFILE_CLASS1' is not permissible
Message no. SG809
Diagnosis
You are attempting to use the logical file name 'Z_LOGICALFILE_CLASS1' in the current context. However, this logical file name is not permissible due to the system configuration.
System Response
Execution is not permissible with the logical file name 'Z_LOGICALFILE_CLASS1'.
Procedure
Select one of the permissible logical file names or contact your system administrator to have the logical file name 'Z_LOGICALFILE_CLASS1' permitted for this context.
Procedure for System Administration
The current application uses the logical file name 'CLASSIFICATION' to check the permissible logical file names. The user is attempting to use the logical file name 'Z_LOGICALFILE_CLASS1' (perhaps by selecting a previously-defined variant).
The user either needs to adjust his or her variant appropriately, or you can permit the logical file name 'Z_LOGICALFILE_CLASS1' in this context.
More information about checking file names: SAP Note 1497003 (https://service.sap.com/sap/support/notes/1497003).
Please suggest me...
Thanks
Ganesh
Similar Messages
-
LSMW Direct input method error
Hi experts,
I created the LSMW using direct input method (PR Creation).
In the create batch input session step (executed) i am getting below
message and follwed bt processing terminated message and going out
Transaction 0: transaction code / not supported
what could be the problem ? any problem in specifying logical path .
pls let me know the solution.
Thanks
saiHi chenna,
Thanks for reply, I added the tcode and now getting the message like the session was created
but when i see in sm35 there is no seesion created and there is no log also.
what could be the reason? pls explain
thanks
sai -
Error log table for LSMW-Direct input
Can any one tell me , What is the table for storing the error messages in LSMW-Direct input?
Regards,
Nageshfor LSMW-Direct input method you can use EXCUTE IN BACK GROUND. the job is running and see the job name in SM37 . after completion of your job , select you job name and press the SPOOL button there you can find the you job error log.
-
Net Price Calculation Error in LSMW(Direct Input)
Hi,
i am using LSMW-Direct Input method for Creating Purchase Order .i am facing Problem like Quantity Conversion error in Net Price Calculation.
Any one please help me out.
Regards,
Shobha HenryBest practice would be to use BAPI/ALE method instead of direct input but if you've already done with the mapping etc. try putting a break point in the generated LSMW program where the net price is calculated and transferred to SAP field and then run it to see in the debugger what's going on. I reckon its possibly a type compatibility error.
Hope this helps,
Cheers,
Sougata. -
Create Inspection Plan -LSMW -Direct Input -Error with Control Indicators
Hi,
I am creating Inspection Plans using LSMW-DIRECT INPUT Method.
Although MIC's control indicator parameters are correct while creating a plan it is changing the control indicator parameters.
how can we suppress this?
I want to use MIC's default parameters.
Regards
Praveenhave Lost Previous File
what does that mean? did they lose the source that should be used to load the data from?
without source you cannot load data.
Had you ever got this source file? how? by mail, then check your old mails and take it from there, ask the sender to he/she checks the SENT folder in his mail system. Maybe someone has a local copy of this fille. -
LSMW(Direct Input) Material master issues
Hi,
I have few issues on Material master-LSMW(Direct Input-RMDATIND) data upload(creating materials).
1. Can i upload excel sheet for uploading data! What option i have to choose in 'specify files' for this!
2. I am using fields MBRSH, MTART, MAKTX, MEINS, BISMT, MATKL, MAGRV for mapping.
But when i tried to upload in last step-start direct input program with Lock Mode-'N' it is giving error as
'Plant data does not exist'. Because this is for 'Basic Data' i though no need to input plant.
3. MATNR field is not needed for creation right as it is auto generated!
4. I have to do seperate object for this project for 'Sales organization data' & Plant Data is there any checks needed for the same!
Can anybody give solutions for the above!
Thanks in advance.
Thanks,
Deep.1. Now i am trying to process 4 records it is creating 3 records.
It is always skipping 1st record in flat file.
Any check required!
2. Also i want to write a output file(log file) to my presentation/application server with all material no's created & material descriptions. Where can i do the same!
3. Can anybody tell me how to upload using excel sheet.
Thanks,
Deep.
Edited by: Deep on May 14, 2009 3:21 PM -
LSMW --direct input for sales order
Hi frenz,
We are facing a problem in mapping the fields, sold-to-party and ship-to-party in structure BVBPAKOM.
I have already tried using partnerfunction(PARVW) and custno(KUNNR). Even then i got an error 'Specify ship-to-party or sold-to-party'. Can anyone help me regarding this problem.
Helpful answers will be rewarded with points and wishes.
---praveen.hi,
join this link dude
LSMW DIRECT INPUT FOR SALES ORDER
cheers,
sanjay. -
LSMW direct input method - Equipment BOM
Hi Experts,
We have already written program for equipment BOM master in LSMW direct input method. I do not know about this direct input method.
Here they have maintained 2 source structures and relavant source fields. one for BOM header and other for BOM items. The first field they maintained is LINK in both the source fields. I really do not know what that field is all about. I checked in step specify files and found that they have previously mentioned two files, one for BOM header and other for BOM items. but when I tried to save in this step it gives me error that " No logical path specified". Can anybody tell me what is this error is all about.Please heip me to get out of this problem.
Thanks and best regards,
PraveenHi praveen,
LSMW does not accept two files.
In the step create source strcture
crte one structure with BOM header like with ZBOM_H.
Under that create another structure for item ZBOM_I.
ZBOM_H
ZBOM_I like this structure will will be.
In the step source fields.
crate onne variable with indicatoe header.While creating the variable we have field 'identify field content ' field in pop up screen 'H'.
assign all header files under identifier 'H'.
then under ZBOM_I create identifier with 'I'.
Assign all the item fields to this.
then map the fields.
In the file should be H header fields.
I item fields.
I
I.
Then Header .It should be like this.
in saptechnical u will get the examples go though them once.
Thanks -
LSMW Direct Input Method - Change Documents
Hello experts,
Could anyone please tell me how to enable the change documents(not just runtime) for LSMW direct Input method? There is also one option "Change Documents" in the last step of the process, will this write into any table that I see the changes later If I run the last step with selected this option? If yes, What are the application (customer master data, vendor master data, material master data, etc) specific tables?
Is there anyway that I could populate this method changes into the CDHDR & CHPOS tables?
SAP documenation on this:
To enter the data into the *corresponding database tables directly*, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism
http://help.sap.com/erp2005_ehp_04/helpdata/EN/fa/097174543b11d1898e0000e8322d00/content.htm
Since this tool writing data into database tables directly skips the CDHDR & CDPOS recording..
Is there any other possible way for the complete change logs (change pointers???)? ( Or only table logging?)
Please share your experience on this.
Thanks,
HimadamaNo response received..
-
LSMW - Direct Input Method - AS91 - RAALTD11
Hi All,
I am trying to master data upload of assets into SAP. I am doing it using LSMW - Direct Input method.
I am getting a lot of errors:
- No valid cost center was entered --- Whereas the cost center entered is valid.
- Unexpected record type: B --- whereas I have not specified any record type.
- Company code 0315 already contains assets in the number range T4 --- Whereas I have run the LSMW only for company code 0312 and with just a single record.
- And many more such errors.
Please advise if I am doing something wrong.
Also I want to know to which field shall I pass the Cumm Acquis Val and the Net Book Value.
I want to know the corresponding fields in the BALTD and BALTB structures for these fields.
My flat file contains the below fields:
- ANLKL Asset Class
- BUKRS Company Code
- TXT50 Description
- AKTIV Capitalized On
- KOSTL Cost Center
- ORD42 Allowed Capital Allowances?
- EAUFN Investment Order
- NDJAR Planned Useful Life in Years
- NDPER Planned Useful Life in Periods (months)
- NDABJ Expired Useful Life in Years
- NDABP Expired Useful Life in Periods (months)
- ?? Cumm Acquis Value
- ?? Net Book Value
I don't know how to map the last two fields. Although I could find another field ANBTR01 in BALTB structure. But then which field tomap to this structure and to which field shall I map the remaining one.
Please advise.
Thanks & Regards,
NamrataHi All,
I have now removed the BALTB structure and am filling only teh BALTD structure. I am not getting any errors and the asset is getting created.
But when I go and check for the asset in AS93 / AS92, the depr areas (planned and expired life in years and planned and expired life in periods) are not getting populated in SAP. Also in the Takeover Values tab, ***.acquis.val and the Net book value fields are not getting populated.
Below is the mapping of all the fields:
BALTD-MANDT = 600 (GETTING POPULATED ITSELF)
BALTD-BUKRS = SOURCE-BUKRS
BALTD-ANLKL = SOURCE-ANLKL
BALTD-TCODE = AS91 (HARDCODING IN LSMW)
BALTD-RCTYP = A (GETTINGPOPULATED ITSELF)
BALTD-AKTIV = SOURCE-AKTIV
BALTD-ORD42 = SOURCE-ORD42 (ALWD)
BALTD-EAUFN = SOURCE-EAUFN
BALTD-TXT50 = SOURCE-TXT50
BALTD-KOSTL = SOURCE-KOSTL
Below are the dep areas fields values and the takeover values.
BALTD-NDJAR01 = SOURCE-NDJAR01 (PLANNED LIFE IN YEARS)
BALTD-NDPER01 = SOURCE-NDPER01 (PLANNED LIFE IN PERIODS)
BALTD-NDABJ01 = SOURCE-NDABJ01 (EXPIRED LIFE IN YEARS)
BALTD-NDABP01 = SOURCE-NDABP01 (EXPIRED LIFE IN PERIODS)
BALTD-KANSW01 = SOURCE-KANSW01 (CM.ACQUIS.VALUE - IN TAKEOVER VALUES TAB)
BALTD-KANSW02 = NET BOOK VALUE IN TAKEOVER VALUES TAB.
BALTD-WRTMA = SOURCE-WRTMA (SUGGESTED BY SOMEONE ON SDN FOR NET BOOK VALUE)
None of the above dep areas and takeover values fields (fields in bold) are getting populated in SAP.
Please help and advise how to proceed with this.
Regards,
Namrata -
Hi
I am uploading BOM throuh LSMW direct input ..... in this procedure i have got an error at step 7 specify files
i have specify file then i try to sve that step sysytem has given below error... pls could any guide me this procedure.
Error message:
"No logical path has been specified"
Message no. /SAPDMC/LSMW_OBJ_060046
Regards
H GVD
Edited by: hemanth.gvd on Feb 11, 2012 1:19 PMDuring file assignment when it asks for logical path and logical file for ".conv" file to be saved on the server(Double click on .conv file name). Just enter a path name and file name ( eg: ZPATH and ZFILE) and hit enter if the path doesn't exist it will create one, same with logical file name.
Look at this [screen shot.|https://lh6.googleusercontent.com/-AoGzW-nBdNs/Tzafs1eEmuI/AAAAAAAAAAk/7OY27NE3ijA/s720/image001.png] -
Hi All,
I m facing a problem in LSMW - direct input for XD01Transaction (Create Customer).
while testing the file from Application server using BATCH INPUT SESSION. At the end, my Session fails and it shows an error in the log "Function code cannot be selected" and under that line 1 more comment is there - "Transaction Error".
please help me in this issue.
Edited by: Rahul Gautam on Sep 17, 2008 1:53 PM
Edited by: Rahul Gautam on Sep 17, 2008 2:25 PMHi
I found the Solution
Thanks -
Problem while Creating BOM using LSMW Direct Input
Hi all ,
I am trying to create the BOM Using LSMW Direct Input Method .
I am getting problem at step 9 that is Read Data.
It is able to read the values from header and item files .
but it is not able to write , so the Written is 0 always .
I put the field names first in the flat file and correcponding values below it with tab delimited.
Please let me know where the Problem would be.... I am trying this from long time ..
Regards ,
Rajhi ,
Yes i am specify files i am attaching 2 files .
ones is header and the other is line item data .
my strucure is :
Hi ,
I am still getting problem while for writing the records after reading the data .....
my header structure :
STYPE
MATNR
WERKS
SELAL
STLAN
DATUV
ZTEXT
my item structure :
STYPE
MATNR
WERKS
SELAL
POSTP
MENGE
my header data :
STYPE MATNR WERKS SELAL STLAN DATUV ZTEXT
1 388 0110 20 1 06.01.2009 SAMPLE ZTEXT
my item data :
STYPE MATNR1 WERKS SELAL POSTP MENGE
1 388 0110 20 N 1234
1 382 0110 20 N 12345
Above text files are delimited by tabulator.
Please guide me . The files are reading but unable to write .....
Regards,
Raj -
Reg:lsmw(direct input)
hi friends,
i need your help in lsmw direct input method.
my problem in my flat file one header and multiple header lines.
how to handle in direct input method.Hi,
At "Maintain Source Structures" you need to define two structures. One for header and one for item.
HEADER_STRUCTURE
|___
ITEM_STRUCTURE
At "Maintain Source Fields" you need to define one field as identifier at first field of the structure. Double click at the field and fill "Identifying Field Content".
Then the source file could be specified as below.
H 100965
I 1 Test 1
I 2 Test 2
I 3 Test 3
I 4 Test 4
H is the identifying field content for header and I for item.
Regards,
Teddy -
How do i check the log for LSMW direct Input
Also When i run the LSMW program the LAST STEP has Start Direct Input
What all step do i need to select to make the program run Automatically
Now i tried doing that but had to press Enter key until the load was Over
Thankyou
Shhi,
use option extended log (e.g. in rfbibl00) and after run goto sm37 - Job-log
A.
Maybe you are looking for
-
How to display XML content in a JSP
Hi, can anyone help me in displaying xml content in a JSP?
-
How to maintain translation of views in material master
Hi, How we can maintain translation of views in material master E.g. Basic Data Classification Purchasing MRP1 MRP2 Ect- We want to maintain translations in different languages. Thanks Sudhir
-
I deleted Safari's cache.db thinking this would resolve an issue. It did but now there is no cache.db. Where does Leopard put the cache.db if it has been deleted. I would have thought it would have been rebuilt. Thanks for any ideas and suggestions.
-
Can I get some sort of discount to download Photoshop CS5 if I already have the CD for it?
Excuse me if this sounds like a silly question but I just wanted to make sure. I got a MacBook Air with no CD ROM. I already have Photoshop CS5 for Mac but it's a CD. Is there any way of transferring the Photoshop software to this new Mac with little
-
Just installed 10.8.4 on MacBookPro and no longer can connect to Netgear NAS. Get a message: Version of server trying to connect to not supported. Checked passwords and all config info and they are correct. Apple help line not interested in givin