LSmw error at time of reading files

Hi in doing LSMw in 4.7
and i am facing the following error
File 'H:\Test FB60.txt' and source structure 'VEN_POST' have no fields with the same name.
Message no. /SAPDMC/LSMW_OBJ_070023
Suggest the sol.
Thans in advance
SAPUSER5

Hai
I am also facing same error. Could you please let me know, what i need to do?
Thanks in advance..
Regards,
Kumar

Similar Messages

Error ORA-20003: Cannot read file/... in Cash Management?

Dear All.
I am having this Error in the Cash Management Module on the bank statement load process
Error ORA-20003: Cannot read file /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
How do I resolve this error.
Thank you.

Hi Lucy,
The error is probably due to one of the reasons:
1. There is no file in the location: /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
2. No permission on the file respective file.
Please get the assistance from the DBA to check on this.
Thanks &
Best Regards,

Error 16: unable to read file

Hi,
when opening this file in adobe acrobat x pro, everything goes well. But as soon as my employee starts to edit the file, like cutting a page out of it, he gets error 16: unable to read file. There's pretty no more information to give you, it's as simple as that?! It's with one file only, so far, others work great.
Anyone any idea what is happening here?
Thanks,

Robert
would there be any red flag, so to speak, other than file size, to tell me I've found what I'm looking for?Not knowing the program, I don't know what it might name its temporary files, if any, so size would be the best indicator.
Is there any particular place I should look for the temporary fileWell, there are standard places where Unix puts temporary files, /tmp and /var/tmp, but you can't navigate to these by icon since they are normally invisible. However, in WhatSize …
Click on the Folder icon, then (with cursor already in the Search box) type '/'. A sheet with "Go to the folder" drops down. Complete the path to say "/tmp" and click "Go", when you'll get a column view of the contents which you can navigate normally, then "Open" to see details. You can do the same with "/var/tmp". Probably the files you see here will be quite small, but you may be lucky.

8g touch updated 4.2.1, problems synching apps and music. gives multiple errors; device times out, internal device errors, network times out, duplicate file, too many files open. itunes diagnostics ok. what to do?

have an 8g ipod touch which has had problems trying to play games and downloading update 4.2.1. went to the apple store who kindly downloaded the software update but now can't synch and generates multiple error messages; device times out, internal device error, network times out, duplicate file and too many files open etc etc. have latest i tunes download and diagnostic test ok. what can i do?

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Open Data Set Error while trying to read file from non SAP server

Hi all,
is it possible to read data from non-SAP application Sever?
I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
I make test to read file from SAP application server and it was ok.So how to call other server?
Thanks!

Hi,
Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
Regards,
Gilberto Li

Ipod freezes during sync then error that it cant read file...

A little pre-info... I have owned a black 30gb 5th gen (video) Ipod for a couple of years now. I plug it in fine, my computer recognizes it fine, Itunes works fine with it... everything works great.
I just bought another Ipod off ebay that is exact as mine except white- auction states the Ipod works fine, seller has awesome feedback, etc.. I bought this for a gift for my sister for Christmas. It is second hand, so warranty is expired.
I plug it in the computer, and first tried to transfer some normal text data via explorer. I had put this same data on my own black Ipod with no issues, words fine. The white? Lo and behold I get that "Data Cycle Redundancy" error during copy. My experience is that that has always meant that the original file is messed up, not the destination its being copied too... but in this case I know the original file(s) were/are ok.
And the Ipod freezes. So I safely unplug, and try to hard reset it. It wouldnt for a bit, and I noticed the Ipod was rather warm (but this might be because it was frozen for several minutes with the backlight still on as well). Finally I get it to reset. Same stuff happens again, again its hard to reset.
So then I decide screw it, forget adding the stuff via explorer, Ill just try to get the music on my computer at least, over via Itunes, after I first restore the Ipod.
Itunes opens... recognizes the Ipod... I go to copy music, and it copies until it essentially 'freezes'. I tried many times - its not a bad file because the same file would copy the other times Id try. It would freeze on any random file, during the write process.
Then Itunes comes up with this error:
"the ipod cannot be synced. the required file cannot be found"
I dont think this is referring to my files trying to be copied, they werent deleted or moved from their location since importing into the Itunes library. Im wondering if theres a system type file on the Ipod that Itunes speaks to as it transfers...and when the Ipod freezes... hence it cant be found...
At the same time I get this error from Itunes, I get a Windows XP bubble pop up that says:
"Delayed Write Failed - Windows was unable to save all the data for the file x. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
Now again, my computer/windows is NOT the issue. Its the Ipod.
All the advice I have searched says to fix things on my computer. That includes that Apple support page in regards to those errors - it points the finger at my USB ports, etc - and thats simply not the case. If it was, my other Ipod wouldnt be working either - nor would my flash drives.
Its the white Ipod.
I saw one site suggest to format the Ipod via Windows first, then do the Itunes restore, but the Ipod froze and Windows couldnt format.
I went into Device Manager and compared the two Ipod settings, both share the same settings. They are not set on 'enable write cache'.
I have tested the HD via Diagnostics, and the BL blinked after the test, showing the HD passed... so right now I can only think of three things... a bad logic board perhaps, or the Ipod system files are corrupt somehow no matter how many times I do the restore... should I revert to an older update; is that even possible. Or the HD is bad after all and its just being missed in the test.
So now... I need help. Am I missing something important? Is it a simple fix... a corrupt file thats freezing the Ipod somewhere - or did I get a bad Ipod from the seller.
Its so close to Christmas, if there was some simple fix(instead of it being a bad HD) I could fix it myself, Id rather do that than go through the hassle of returns/refunds. Not to mention, its always a gamble how the seller will react. Will they help, or say its not a problem on their end and try to screw me... then Ill have to go through Paypal for reimbursement and that takes 90 days at least...

I wish I had good news but all I have is information. I have access to 4 5th gen ipods. 2 black 30s and 1 white 30 and 1 black 80. The one white and one of the blacks work and have worked flawlessly for the past two years. The other black 30 and 80 started having the issue mentioned here some time after upgrading to iTunes 8. I tried to lowlevel format the iPod drive to fix any issues and that didn't cure the problem. I bought a MacBook a couple of months ago and restored my ipod to Mac format and low and behold it would accept files again! However it wouldn't let me fill the ipod beyond about halfway, this was on both ipods. Now the ipods have become slowly less and less fillable. Seems like syncing rather than putting the songs on manually seems to help, but again its getting worse all the time. (the two ipods that don't have any problems belong to my girls and the problem ones belong to my son and i) <- Grasping at straws I know, but my son and I are constantly changing the songs, playlists, videos and such.
When I bought my Mac the guys at the Apple store were shocked that I was having this problem and practically begged me to bring it in so they could see what it wrong with it. I will post an update when i do that.

PSE 8 - How do I fix the error message: An error has occurred reading files or writing to disk...?

Hello
I am using Photoshop Elements 8 on Windows 7 (64 bit). I have all my photos stored on an external hard drive connected by usb. The photos were transferred onto the HDD from a Windows XP machine. I bought a new computer so I installed Photoshop 8 and imported all my photos to the organiser from the HDD. I have also taken some photos yesterday which I have uploaded to the HDD.
Now, when I want to delete a photo I check the box to say I want it to be deleted on the hard disk and I get the error message: 'An error has occured while reading files or writing files to disc. The disc may be full or there may bea problem with the source media.' This does not happen with the photos I uploaded yesterday, only the ones which were put onto the HDD from the XP machine.
Please could someone help? I have tried the File>Catalog> repair and optimise functions. I have reinstalled the software. It still does the same.
Thank you in advance
Dave

David GW wrote:
The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing.

Versamail error: Time out reading body

I have Versamail version 3.1B
When I select "get " for my AOL email, I receive an error message "Time out reading body"
When this occurs I do not receive any of my email's. I am able to send email, however.
My software version on the phone is 1.12-SPCS
Post relates to: Treo 650 (Sprint)

eagerly awaiting message regarding this problem. Having it still in 2008 with my palm t/x
Post relates to: Palm TX

FRM-10221 Cannot read file PL000000-but there is no menu named PL000000 !!?

Hi all!
I'm having a problem wich will get me nervous!
Here we have an application 100% generated from designer. The problem is that it have been started in questionnables ways ... there is 2 workarea to contains all the forms needed for the application instead of 2 containers in the same workarea. The workarea "JD" where we put all the utility forms and the workarea "PL" where we put all the forms use for the application configuration.
Recently I have developped a new form in the container "PL" but the menu calling this form is in the workarea "JD" with a fake copy of the original form so we can refer it in the "JD" menu. When i generated and run the applications and i choose my new form in the menu i got the error "FRM-10221 Cannot read file PL000000" 2 times then the forms is called and is running correctly. I really don't understand whats is going on cause there is no menu called "PL000000" in the 2 workarea!!!
All that i read about this error mesage from now tell that the menu is not in the form path or many other solution, but in my case I got an error about a menu that does not exists!! I know that something is triggering this but i just can't find it cause there is no menu called "PL000000" anywhere in this application!!??
Is there someone who could have an idea about whats going on here!!??? HELP PLEASE!
Thank you!

Thanks alot!
I'm not familiar with 100% generated forms from Designer yet and your answer make me discover something. It seems that when you generate a new form, the main menu of the container is automatically attached to that forms by default.
Plus i was wrong in a point in my original post. There was no menu named "PL000000" but there was one named something else but with the "implementation name" as "PL000000" ... my bad ...
Thanks alot again, my problem is now solved!
:o)

FRM-10221: Cannot read file /u02/applfint/apps/apps_st/appl/au/12.0.0/resource FRM-41810 FRM-41067

Hello Experts,
I am in the process upgrade EBS to 12.1.3 and when attempting to launch forms to "Generate All Business Views", I encountered three Form errors:
FRM-10221: Cannot read file /u02/applfint/apps/apps_st/appl/au/12.0.0/resource
FRM-41810: error creating menu
FRM-41067: cannot fine menu item: invalid ID
Back in my shell, I have also noticed that some part of my environment variable is not functioning correctly or is missing:
. /u02/applfinp/apps/apps_st/appl/APPSOFPROD_ofinprod01.env
or
. /u02/applfinp/apps/apps_st/appl/OFPROD_ofinprod01.env
Gives:
-bash: /usrxit/devenv.env: No such file or directory
I have used adadmin utility and choose option to recreate grants and synonyms; executing adautocfg.sh but problem is persisting.
Thanks
Mathias

Hello Hussein,
I am glad you are online. I am on a deadline to finish an upgrade by 8 AM this morning.
I have actually finished the upgrade and was about to "Generate All Business Views" to fix all the dozens of invalid views that are trailing.
I had just finished applying Patch 9239090 to get to ebs 12.1.3 an its pre-requisits. This is the first time I am opening these forms and all forms are throwing the same error.
I have manually relinked the adadmin:
adrelink.sh force=y "ad adadmin"
Autoconfig is giving errors:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 1
java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
Thanks
Mathias

Error for the uploading csv file to database

Hi i tried to upload the csv file to database and i am getting error as
<cffile action="read" file="#data_dir_upload#/di_audit_corp_upc_ldr_tbl.csv" variable="di_audit_corp_upc_ldr_tbl">

<cfloop index="index" list="#di_audit_corp_upc_ldr_tbl#" delimiters="#chr(10)##chr(13)#">
    <cfquery datasource="#request.dsnCAO#">
            
         INSERT INTO [dbo].[di_audit_corp_upc_ldr_tbl]
                            ( cpt_dpt_cd,cpt_com_cd,sub_com_cd,con_upc_no,pid_lng_dsc_tx,pid_sht_dsc_tx)
         VALUES
                  (<cfqueryparam value='#left(trim(listgetAt('#index#',2,',')),2)#' cfsqltype="cf_sql_char">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',3,',')),3)#' cfsqltype="cf_sql_char">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',4,',')),5)#' cfsqltype="cf_sql_char">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',1,',')),13)#' cfsqltype="cf_sql_varchar">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',5,',')),25)#' cfsqltype="cf_sql_varchar">,
                   <cfqueryparam value='#left(trim(listgetAt('#index#',6,',')),12)#' cfsqltype="cf_sql_varchar">)
   </cfquery>
</cfloop>
Error:
An error occurred while executing DTS package to import data.
Invalid list index 6.
In function ListGetAt(list, index [, delimiters]), the value of index, 6, is not a valid as the first argument (this list has 5 elements). Valid indexes are in the range 1 through the number of elements in the list.
i am unable to solve this issue can any one will help me to solve this issue
Thanks,
Kiran

I take it your are trying to use a csv file to insert new data into a database, using flex and coldfusion?
if so, then I would load the file in flex using cffile in ColdFusion and then use Load Data if you are using MySQL
This can show you more about it.
http://blog.tygate.com/?p=75
We get very large csv files ftp'd to us every week, and we have to load them in to the db. this works for us.

Unable to find/read file META-INF/ra.xml

When using the oc4j_admin_client to deploy an ear to a oas cluster I get this error, but only sometimes. I cannot find anything on the web that explains what might be causing this to occur. I'm guessing it might be with the configuration of OAS but even so I have no idea where to look. If anyone out there can give some advice it would help. Thanks,
[Summary] There are total 1 instances in the operation.
[Summary] Operation failed on applicationServerName/instanceName
[Summary] Operation on cluster FAILED since 1 instanced failed!
FINE: CoreRemoteMBeanServer.release call release on CoreRemoteMBeanServer: oracle.oc4j.admin.management.mejb.MEjb@5c1ae90c
FINE: CoreRemoteMBeanServer.release Call remove on MBeanServer EJB
FINE: CoreRemoteMBeanServer.release Call close on RMI Context: javax.naming.InitialContext@1629ce8c
SEVERE: J2EEDeploymentManager.deploy Deploy error: Operation failed with error:
Unable to find/read file META-INF/ra.xml in D:\oracle\u01\oas\10.1.3\j2ee\instanceName\connectors\AppName\AppName archive (IO Error: D:\oracle\u01\oas\10.1.3\j2ee\instanceName\connectors\AppName\AppName (The system cannot find the pat
h specified))
oracle.oc4j.admin.deploy.api.J2EEDeploymentException: Operation failed with error:

Hi forum-hog,
I think this is due to a known product defect. The patch is available and can be downloaded and installed.
Please try the following:
1) Download and apply patch 9073284
2) Perform the deployment again
Hope this helps.
Thanks,
Cris

When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Issue in lsmw ; error in read file step

hi,
i 'm facing some really strange issue in lsmw..
i have created one header structure and 3 sub structures.
until now its working fine
but when i created 4th sub structure and in the read file step, its giving the following error :
"Generation aborted. Reason: No fields with equal names"
again if i delete that extra structure, its working fine..
i really don't understand whats the problem... is there any restriction on number of structures?
i need ur help guys
Thanks in advance
shekhar

In step 13 Create Batch Input Session .....select Keep Batch input folder check box and goto step14 Run batch Input Session ....
Slect your session name and click on Process....it will give one window and select Display Errors Only....then it will execute without press enter every screen...if any error is there it will stop and display error screen.
Mohan

HT201250 My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?

My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can’t be copied onto the backup disk because it appears to be read-only. How do I fix it?

Hello,
http://pondini.org/TM/C6.html

LSmw error at time of reading files

Similar Messages

Maybe you are looking for