Lsmw Error during the specify files

While doing Material master upload thru lsmw...using Batch input method
During the specify files step i am getting this error
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Pls Guide me.......

Hi,
How you save your source file? Need to be saved in as TAB delimited file
OK. Check link:
http://www.sap123.com/a/98/#loading-material-masters-with-lsmw-direct-input-method
http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench
Regards,
Biju K

Similar Messages

In LSMW while executing the specify file step logical file name and path.

Hi ,
In LSMW , while executing the specify file step, logical file name and path is mandatory field to entry, but in some of other LSMW objects, these fields are not mandatory one, i want to know is it possible for me to do hide the logical file name and path field in specify file step.
thanks
Md nisar

Hi,
For some Transactions while executing the Specify file step Logical File and Logical Path are mandatory.
In this case Converted file will be stored in the application server. According to the specified Logical File and Logical path.
Hope this will help you....
Regards,
Tirumala Reddy

Error 127: The specified file or directory name is invalid

Hello,
I am trying, for the first time, to Groom a users home directory. I had created user Home directory policy and have added vault and groom...

On 5/14/2013 7:16 AM, nwadmsitn wrote:
>
> Hi,
>
> I'm trying to evaluate File Reporter. I have installed the agent on a
> OES11 box. This agent is acting as my proxy agent.
>
> Then i setup a policie to scan a volume on 2 differents server. One is
> OES11, the other is OES2.
>
> When i launch my policies i have very differents result :
> - Volume Free Space : After 5 attempts finally it is working
> -File System DATA : I have most of the time this error : (127) - The
> specified file or directory name is invalid. Sometimes Operation is
> successfull but in the reports i have only data for 1 of the 2 volume
> and only for 2 directories
>
> In the log file of the nfr proxy agent i have this kind of error :
> 01 2013-05-14 13:00:29 7200 3 0006 5953 7f674b5e0700
> SRSScanAndCollectFileSystemDataService::FinalizeSc anDataEntry() - Worker
> thread encountered an error and is exiting, Scan ID = "18", Result = 0.
>
> Can someone help me ?
>
> Stephane
>
>
Stephane,
Just to clarify a few things:
1. Do you get these results for both scan targets? Or only a proxied
scan of the OES11 or OES2 volume?
2. What sort of volumes are being scanned? NSS? AFP? NCP? What's the
underlying Linux filesystem type, if applicable?
Thanks for helping us understand your problem better.
- NFMS Support Team

LSMW: Error concerning the logical path in Specify Files step

Hi,
I am trying on an ECC 6.0 EHP6 system to upload (open) POs from an existing SAP ERP system. Since I faced some complications in batch input recording method, I decided to go with the standard batch/direct input method.
I selected object 0085 (Purchase Order) and method 0001 (Purchase Order). The program that is used is RM06EEI0. I followed all the usual steps, but in the "Specify Files" step I get the message:
'****.lsmw.conv' does not exist; edit the logical path using transaction FILE
Being aware of both the FILE and SF01 transactions, I created the logical path and file (through the FILE transaction). However, after the modification, I get the message:
Logical file '****' is not assigned to physical file '****.lsmw.conv'
There is also the related SAP Note 753511 (Logical and physical path and file name in transaction LSMW) that refers to this case.

Hi,
Click on specify file radio button>Legacy data-on the PC Front end
where input file location like C:\mydocument\desktop\test.txt
and give input in Name field: mydocument
in delimiter section > select Tabular
File structure section> tick on Field order matches source structure definition
File type: Record end marker(Text file)
then press enter key and other steps as same.
Second thing you said that you have used Batch input recording
after creation and recording finish , scroll the page below on recording and put a cursor unwanted field and remove unwanted input field.
I hope your problem will resolve. you can find the steps pdf on Google search try now.
Thanks
Sanjeet Kumar

File Error: The Specified file is open and in use by this or another app...

I have imported a string of pictures and dragged them into the FCP timeline. I render them and it renders a certain percentage then it stops and says "File Error: The Specified file is open and in use by this or another application."
After reading this, I quit out of FCP, restarted my computer, opened FCP, nothing other program, tried to render again and same thing happened. It renders part of it then the error message pops up, then I can render again and it will do another percent then it will pop again and so on.
Suggestions, or does anyone know why this happened? Thank you very much for your time.
A

okay - don't know where you've got your scratch disc set but hopefully it's to another drive other than your boot.
The same drive where your render files should be located, ie some drive other than your boot drive.
Can you copy the jpegs over to that drive into a folder.
Delete them from your tl, delete them from your proj. Save your project. Close fcp.
If they're on your boot drive - delete them.
Reopen fcp and Reimport them from the new location.
Sorry for all the steps - but we have no idea how you have configured fcp or your level of experience. Trying to cover all the bases ...

FILE ERROR: The Specified file is open and in use...

FILE ERROR: The Specified file is open and in use by this or another application.
I get this error when I import a .MOV created by Live Type. All applications, except FCP, are closed. I can reboot the computer and get the same thing. It happens when I try and "render all". Thanks.

It's probably either spotlight looking at the files, or some anti-virus program thinking your render is a virus.

Cannot render files. The following message appears: file error; the specified file is locked

Suddenly I cannot render any project in Final Cut 6, because a message reads: file error: the specified file is locked. Any clues on what to do?

The reason we suggest searching is there are too many possible causes and unlikely answers and FCP6 was a long time ago.
bogiesan

File error: The specified file i locked. when i am trying to render a clip on the time lin e

WHen i want to render a clip on the timeline it tells me this message"file error: The specified file i locked."drive and file and they are not locked.
What setting do i check for this
because up till now the program was rendering all clips on the time lne
I have checked the the drives and files and they are unlocked.
please advise
i have to render the clip from the timeline as n export then bring it back in
annoying !

Before I ask you to check permissions on the drive you save your material and output files, try creating a new project, copy everything from the old one in it (highlight-copy-paste in new project) and save as with a new name. Does this work?

File error: The specified file is locked - HELP!

hello,
everytime i try and save my project i keep getting the error:
File error: The specified file is locked
i went to the project and "get info" and saw that the file is locked...i also noticed that every other file in my computer is locked as well.
i just got my machine back from the repair shop...is there a setting i can use to turn off all locked files??
thanks,
steven

Paste the text that Neil posted,
*tell application "Finder"*
*set locked of every item of entire contents of home to false*
*end tell*
into the white area under the Record and Run buttons. Then click Compile, then the Run button.

File error - the specified file is locked, Final cut pro

file error - the specified file is locked, Final cut pro

I usually get this when I try to save a project and it isn't stored on my HD(usually external HD or RAID). Sometimes I can do a save as and save it to the desktop.
Sometimes everything is cleared up with a restart. It seems like it is a FCP7/OS developmental need which is mute because 7 is no longer supported by Apple.

Error Message "the system cannot find the specified file"

Hi,
I built my website with iWeb, but when I want to publish it on my own domain (not .mac) I've always this error message (the system cannot find the specified file) with many files. I've tryed many ftp host but I still have the same problem. I ask my host domain manager and everything is ok with them. Si I guess that the problem comes from iWeb.
Please help me.
Thanks

I get the error: Cannot Copy 08 the curse in on my house: Cannot find the specified file. Make sure you specify the correct path and file name.
The song "the curse in on..." is on the "into the woods" soundtrack. I deleted the entire soundtrack from my iTunes Library, shut down and tried again. Same error. I did a search of all three hd (2 external and c) nothing found. I searched for song name and "into the woods" I even searched for the artist "Nicholas Parson Company" nothing on any of the 3 HDs. I also went into explorer and manually searched for the song under soundtracks, misc, various and I could not find it. I consolidated my library and restarted. I tried again and same error message. Can a level 4 or 5 offer any help. I am at a loss...
The error won't let me copy one library to another HD.

Please help with "Error writing the project file. The specified module could not be found." error.

I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.

Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Ugh: Error [0x800700a1] The specified path is invalid.

I'm having the following problem.
Our backups are failing with the following error:
In the backup logs, I find:
Error in backup of D:\ during write: Error [0x800700a1] The specified path is invalid.
Error in backup of D:\Perforce\ during write: Error [0x800700a1] The specified path is invalid.
Error in backup of D:\Perforce\Database\ during write: Error [0x800700a1] The specified path is invalid.
Error in backup of D:\Perforce\Database\p4s.exe during write: Error [0x800700a1] The specified path is invalid.
In the event viewer, I find:
The backup operation that started at '?2010?-?05?-?24T21:51:56.331072200Z' has failed with following error code '2155347997' (The operation ended before completion.). Please review the event details for a solution, and then rerun
the backup operation once the issue is resolved.
And on the command line, wbadmin returns:
Found (41) files.
The backup operation stopped before completing.
Summary of the backup operation:
The backup operation stopped before completing.
Detailed error: Element not found.
The backup of the system state failed [5/24/2010 5:23 PM].
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-24-05-2010_14-51-56.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-24-05-2010_14-51-56.log
The operation ended before completion.
Element not found.
ERROR(-3): Backup failed!
This is very frustrating.
The more I use Windows built-in backup the more fragile it seems to be.
The D drive is a local drive and the path is valid.
Running check disk finds no problems. The drive is mostly empty.
I tried with and without the anti-virus software, same problem.
There are no other server errors to indicate a problem with the drive or the path.
I ran vssadmin list writers, and none of them returned any errors.
Why would the backup return an invalid path error, for a path that is valid?
Any help would be greatly appreciated.
Thanks much,
James.

Hi Sriram,
Thanks for getting back to me!
I'll try to mail them to you before the end of the week.
A quick question:
if the backup failed to find and copy a single file or directory (for whatever reason), why does it abort the whole process?
The file in question was not critical, so having it missing from the backup would only have been a minor inconvenience.
Obviously, you want to log such an event very clearly, but it does not make sense to me for it to kill the whole process...
Will this be improved in future versions? I have to admit, I've not seen much backup software stop because of such a trivial error, except maybe "copy" from the command prompt.
I think the built-in Window Server 2008 R2 backup software is very promising, and overall, I like it better than the old NT Backup crud.
However, from my limited use, it still seems rough around the edges; too many glitches and problems, something you don't want to see from your backup software.
Thanks much,
James.

Error during the SAP NetWeaver 7.01 ABAP Trial Version Installation

Hi everybody,
I'm just beginning to discover SAP system and have already my first problem ^^
During the installation, the system stop at 33 or 34% of the complete installation. I've verified the system requirements and need some help to pass this step :
I've got an Intel(R) Core (TM)2 Duo CPU @2.66Ghz with 3.25 Go of RAM and with 55Go 25 hard disk free space
I've made the SAP Management Console installation and after this, i found this error in the log file :
(Oct 8, 2008 5:09:54 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:sapdbNSPlog.txt for details.
(Oct 8, 2008 5:09:54 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME~1/svigot/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME~1/svigot/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
I control the MaxDBSAPNWPREV.log and find this type of error :
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst: starting installation phase of package SAP Utilities 7.7.04.23 32 bit
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst: ---------------------------------------------------------------------
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst:
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SAPUTL.TGZ"
Wed Oct 08 17:09:32 EDT 2008 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-08 20:30:27 bin/
Wed Oct 08 17:09:34 EDT 2008 MaxDB sdbinst: extracting: -rw-r--r--      1215488 2008-07-08 18:59:59 symbols/sapni.pdb
Wed Oct 08 17:09:36 EDT 2008 MaxDB sdbinst: checking unpacked archive... ok
Wed Oct 08 17:09:53 EDT 2008 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Wed Oct 08 17:09:54 EDT 2008 MaxDB sdbinst: Free to wrong pool 3851a8 not 44344634 at SAPDB/Install/InstallRegistry/Package.pm line 406.
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Error during call to sdbinst, rc= -1073741819
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Done with call_sdbinst
Wed Oct 08 17:09:54 EDT 2008 MaxDB: rc of sdbinst = -1073741819
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Start of CallSdbuninst
Wed Oct 08 17:09:54 EDT 2008 MaxDB: IndepProgPath: C:/sapdb/programs
Wed Oct 08 17:09:54 EDT 2008 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Calling check for db_enum in case of an abort
I've delete all files, all references to SAP with the regedit and made others tries but with practically the same results ... It can be made on other packages ...
I don't understand how can i resolve it and need your helps.
Thanks for your help,
Regards
Séverin

so ... i don't understand why ... I retry to make th einstallation on the first Windows and i've always the same error but not at the same place. It stops between 33 and 35% of the installation during the check of the package ... very strange.
Have you made the installation with the SP3 or do you using the Netweqver with that ? Becquse my problem comes during the installation. I'll try to make the upgrade of the Windows to control the good working of the system (i think there is no problem with that .... but in the doubt )
Thanks for the information Peerasit Jomsri

Dboraslib.dll - Error 126 : "The specified module could not be found."

Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
        Error 126 = "The specified module could not be found."
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    1
intno      0
make:      multithreaded, Unicode
pid        2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
     shared lib "dw_xml.dll" version 1 successfully loaded
     shared lib "dw_xtc.dll" version 1 successfully loaded
     shared lib "dw_stl.dll" version 1 successfully loaded
     shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          10528     (1316)
DpShMCreate: sizeof(tm_adm)          2506872     (12472)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpShMCreate: sizeof(comm_adm)          290000     (580)
DpShMCreate: sizeof(vmc_adm)          0     (372)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Mon Aug 09 06:45:43 2004
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     3224 Ended         no      1   0             0
1 DIA     3232 Ended         no      1   0             0
2 UPD     3240 Ended         no      1   0             0
3 ENQ     3248 Ended         no      1   0             0
4 BTC     3256 Ended         no      1   0             0
5 BTC     3264 Ended         no      1   0             0
6 SPO     3272 Ended         no      1   0             0
7 UP2     3280 Ended         no      1   0             0
Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9, udp     6 ( 66%), shm     3 ( 33%)
since last update     total     9, udp     6 ( 66%), shm     3 ( 33%)
Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
Good Bye .....

Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar

Lsmw Error during the specify files

Similar Messages

Maybe you are looking for