LSMW - Error in Inventory - Create batch input session
Hello good day.
I'm trying to create a batch input session for inventory upload (Standard Batch Input program - RM07MMBL) and when I select the Name of logical file = "MM_INVENTORY_MANAGEMENT_GOODS_MOVEMENT" and press F8, the following error occurs:
<b>Sequential file mmgoods cannot be opened
Message no. M7 850</b>
Now as the legend says.... I've contacted my system administrator and he keeps telling me everything is ok, but the error keeps appearing, where can I see if I have authorization for this "file" ???
Where is it created ??
I need more info on this.
Your help is very much appreciated.
Thank you.
Juan
go to file transaction n check for the logical file path and logical file weather it is defined correctly r not?
if it is correctly defined check for the file, weather the flat file is defined at the correct location which is defined in the logical file path
u can refer the below link also
Re: Logical file
Regards,
Naveen
Similar Messages
-
LSMW Create Batch Input Session question
Hi all
when I use LSMW to upload data. every step is OK, but at the NO. 13 step ' 13 Create Batch Input Session', it always set the 'Display Trnacts per BI Folder' field a default value '1' .I must clear the defautl value and let the field to black so I can create ONE session.
why it always set a default value '1' in the 'Display Trnacts per BI Folder' field ??
anybody can help me?
thanks a lot!!Hi,
=> Looks like you havent mentioned the TCODE that you are using whilst recording. There is a field specific to TCODE in the step 'Maintain Field Mapping and Conversion Rules'. Double Click on the field, a dialog opens, give your TCODE in capitals.
=> Check if you have mapped all the fields that you want to upload using LSMW. You could have missed mapping few target fields with their source fields.
=> Remove any unnecessary structure relations in step 4 - 'Maintain Structure Relations'. -
LSMW Create Batch Input Session
Hi all
when I use LSMW to upload data. every step is OK, but at the NO. 13 step ' 13 Create Batch Input Session', it always set the 'Display Trnacts per BI Folder' field a default value '1' .I must clear the defautl value and let the field to black so I can create ONE session.
why it always set a default value '1' in the 'Display Trnacts per BI Folder' field ??
anybody can help me?It shows the no. of transactions covered in a particular session. Like if you have 1000 records in your load file and if u put 500 transactions as value then it will create 2 sessions of 500 each. And if you leave it blank then by default also it will create 1 session......
Best Luck,
Ravin -
PIR - LSWM Error in create batch input session
Hi
i made a conversion program Purchasing info record through Standard object / Direct Input in that Step 13 : Create Batch input session when i execute the Batch Input session i am getting the following error message
Transaction 00000001 : no transaction code transfered.
Please help me to solve this issue
Thanks & Regards,
mani.Hi
Everything is working perfectly till STEP 10 : " Display Read Data"
once if i convert it it was not populating the correct one. i cant find the T.Code ,Material Number & Indictor for Purchasing Info record.
Please help me to solve thi s issue
Thanks & Regards,
Mani. -
LSMW Routing Standard Batch Input Create Batch Input Session
Hello All,
I am using LSMW for routing upload, using standard batch input method. Program RCPTRA01.
I am facing this quite peculiar problem.
I have tried first with separate text file for every source structure. Everything works fine till convert data step.
But when I go for 'Create Batch Input Session' it creates session for tables MAPL, PLKO, PLPO, PLMZ, PLMK. Other tables remain balnk (EAPL, PLFL, PLAB, PLFH, PLPH, PLFT, PLFV, PLWP). Because of this while running the session only the header and material assignment to task list get uploaded. Rest data, operation, MIC, component allocation do not get uploaded.
I have also tried for one text file for multiple structure. In that I face porblem for BDC creation. While debugging I faced th same thing in this also.
Could anyone please explain me the soution for this? Do I need to amend any progrm fior this?
Expecting lightning fast replies from Gurus....
MimiriHello All,
I am awaiting your reply on this.......
Mimiri -
LSMW Issue at step -Run Batch Input Session
Dear gurus,
While uploading service master through lSMW while processing the system prompts a message specifying "Buffertable not upto date" at Run Batch Input Session step .So please investigate what is missing/wrong.
Wirth regards,
RajI dont think that this has directly something to do with LSMW.
It is more related to the transaction your try to post in the batch input.
Search OSS with the error message number. I had seen some notes for number SE001, but your message is actually twice in the message table, and you did not tell the message number.
If it is message SE001, then you may find programm corrections in OSS.
Otherwise just log out and in again and try, or open a message at OSS yourself if the problem still persists -
Error while Running BRS Batch input session
Dear Gurus,
When i am running Batch input session after BRS statement posted, system giving Error message:
<b>No batch input data for screen SAPDF05X 3100</b>
Entered, saved and posted the statement. after that while processing session getting error like this........How to overcome.
Can we post statement directly without creating session.
Regards,
VenkatHi,
The ABAP Counterpart has to build an exception handling for this particular message.
Normally these messages occur either after an upgrade or after a change in the account(different filed status)
Provide points if usefull.
Thanks,
Praveen -
LSMW : error message when ru batch input
Hi,
i want to integrate some FI docs with LSMW, when i run the Batch input i have this error : Choose valid function.
Any idea to solve that.
full points will be assigned.
RegardsHi Mark,
Welcome.
This is lsmw batch input error.while uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
Fix the error using logs.
thanks
karthik -
Revaluation error"posting are in batch input session"
HI All,
we are using 6.0 version and user has executed revaluation for FEB month,they were practised to use the online postings, but when they excute the revaluation there was an error message for 3 accts " valauation kept in batch input session "and accounts determination is missing for these accounts" and when we check the batch input session using SM35 there is no session with error. How to work on this ?
Is there any particular transaction where we can check the batch input session and execute once the accounts are assigned ?
Plz advice us, and is necessary for closing the month end activity.
best Regards
StephenExecute the session either online or in display error mode. This will give you the exact point of error and also you will be able to get detailed error message.
Regards
Rakesh Pawaskar -
How to handile errors in batch input(session)method
Hi Friends..
How to <b>Re upload the error records</b> in batch input(session)method in BDC Programming?
Regards
D BabuHi
U can do it manually by SM35: the wrong trxs can be run again.
If you want to do automatically I don't think you can do it easyly, because to know if a record was loaded successfully depends on how you have loaded it and your data source .
For example:
if the records have to be loaded are from a file and every record is a trx, you could re-read the file and match it with session log:
Log--Result--
Record file
Trx 1 OK 1
Trx 2 OK 2
Trx 3 KO 3 (Re-load it)
Trx 4 OK 4
Trx 5 KO 5 (Re-load it)
Trx 6 OK 6
How to read session log see trx sm35
Max -
RFUMSV50- Error during batch input session
Hello Experts,
I am getting an error after creation of batch input session for program RFUMSV50.
If I run the session in foreground it gives velow error
program successfully worked 3 months back without any error but after that I am facing this type of issues.
Can anyone please guide what exactly missing in the configuration.
Regards,
psHi Salvatore,
I'm in the same situation. I execute a BI, but it stops after a waring appears.
If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
Did you solved your Problem or did you have an hint for me.
Kind regards
Yvonne Adler -
Create batch input, does not include all records
Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs. -
Batch input session for Recurring Entry
Hello All,
i have created Batch input session for Posting document's for recurring entries creted and job executed in background through SM35 and done successfully, but i am unable to find the Batch input session in SM35 which i have created to run the job.
i want to see the log file for this Batch Input session.
Please help me how to get the batch Input Session.
Thanks
ShankarHi Murali...
Thank you a lot for your answer, i have created the Batch input session without selecting the "HOLD Session" Check box..
Issue Resolved
Thanks Again
Shankar -
Batch Input Session empty while posting Manual Bank Statement T.Code FF67
Hi Experts,
I am trying to do the Bank Reconciliation by T.Code FF67.
The statement is getting saved but I could not see the Batch Insput Session (T.Code SM35) to post the entries.
Please help me in this issue.
Thanks in advance
PriyaHi,
Saving Bank Statement Data and Posting Statement are two different transactions.
Once both amounts (in FF67, Amounts Entered, Statement Amount at the bottom) are matched then if you save, it will save the data in FF67 format. In that screen only if you save again then it will post statement and create batch input session. Similarly you also processed or differently?
Check again in FF67 statement screen & revert back.
Sarma BH -
Table control lines cannot be controlled in Batch Input session ?
I am using a program which creates Batch Input sessions for the transaction FCHR (Online cashed checks) . The second screen is that of a table control where the check number is entered.
I observed that while doing SHDB, if we tick the default size then changing the desktop resolution has no effect on the number of lines in table control - we see 14 lines in both cases.However, when the batch input session is processed, the number of table control lines varies according to the resoution(9 lines for 800600 and approx 15 for 1024768). Selecting the 'Dynpro standard size' option while processing the session has no effect.
I know call transaction with 'default' parameter in optparam will take care of this problem. But I want to know whether Batch Input Session is known to have a problem with different resolutions.HI..
i had the same problem once.... i dealt in the following way
while entering values in table control
1) enter value in the first line
2) look for button on application toolbar using which you can increment line
3) you will not find difference for first line but you will find it when you insert second line and go for next line.
4) now for every increment you will get table conrol as (02) if you are going for recording.
this will surely solve all issue related to table control as it solved for me
regards
Edited by: Mohit Kumar on Feb 19, 2009 12:04 PM
Maybe you are looking for
-
Fonts display problem with Entourage
Hello, I am a new Mac user, having just migrated from Vista to iMac. I love my mac but I am experiencing a problem with how Entourage is displaying some of my emails. They display as weird caracters and symbols, but not all of my email does this, jus
-
About Push Notification Rules in iOS
I've been using iOS for some years now and there's a behavior regarding Push Notifications that I still don't understand. When I launch an app for the first time, let's say a game, and the system asks me "AppName would like to send you push notificat
-
** List of RFCs to retrieve messages from SXMB_MONI
Hi friends, I found only one RFC 'SXMB_SELECT_MESSAGES' to retrieve messages from SXMB_MONI. But, this RFC returns only message id. Could you kindly tell RFCs or classes other than this which will be usefull to retrieve XML Payload and other things
-
Photoshop Elements 13: Freistellen - Merkt sich Bildgröße nicht
Wen man in Elements 13 mehrer Bilder geladen hat und will alle individuell auf eine gemeinsame Größe (Pixel x Pixel) beschneiden, "vergisst" das Programm, sobald man ein Bild beschnitten hat und auf das nächste wechselt, diese Freistellungmaße. Gibt
-
I received an email from comcast that ai need to change my send email settings but don't know how
I need to change the outbound port to 465. 25 will no longer be supported