LSMW: error message u00ABNo logicial path specifiedu00BB
Hello,
I'm trying to create an LSMW for the MIGO transaction.
At step 1, I chose the object 0110 andmethod 0000 which brings program RM07MMBL and program type «B» (batch input) by default.
When I get to step 7 «Specify file», I specified a file at the legacy data level, but the system ask me to specify a file at the converted data too. When I clicked F1 in the logical data field, it says:
Logical Path
Logical path of input files for the batch input or direct input program. The respective batch or direct input program determines whether you need to make an entry here.
Since I don't have the choice to use a batch input program (dicted by the parameters I entered at step 1), I don't know which logical path file to use. I know I can define them in the FILE transaction, but I don't know which one to use for what I want to do, i.e., generate many MIGO transaction using a batch input.
Please help.
Thanks.
Hi,
In specify file , you can see "legacy data" and "converted data".
Click on the legacy data lable & You can click on the edit button (pen) ,
and edit the path < your local hard disk drive at c:\documents and setting \ >
After that , there's pop up windows will show as below :
File Name : c:\documents and setting \
Name *. Txt
File contents , is the file is from source table or from file.Delimiter ,
File sturcture ,
File type.
Code Page.
TQ.
Similar Messages
-
Trying to uninstall or repair get an error message: The folder path 'My Music' contains an invalid character. How do I fix?
Try the following user tip:
"not a valid short file name" and "invalid character" install errors -
Error Message:The folder path 'Program Files' contains an invalid character
I have an 80G iPod. I never had a problem with the itunes program until I switched to Vista. When I try to open iTunes I get the following error message:
*The folder path 'Program Files' contains an invalid character*
I have itunes installed on both my HP and on an external hard drive that I use as my backup in case something goes wrong. Neither one opens and I get the same error message on both. I have tried to uninstall iTunes and then reinstall and get the same message so I can't uninstall.
I'm really frustrated, I need to get to my music for a huge presentation in a few days. Can anyone help?
Thanks in advance,
JejoHave you tried working through the steps in the General section of this article?
http://support.apple.com/kb/HT1926 -
Hello. I couldn't get my Topaz plug-ins to work (kept crashing without saving the image), so I uninstalled/reinstalled, and no improvement. So I decided to uninstall and re-install PSE 10 to see if that would help. I got an error message: 2343: Specified path is empty, and then the uninstall quit. That's where I am now. Can't find it in my Control Panel Uninstall programs list, but it is still in the programs file. Not sure if I should delete all the folders and .dll's in the program folder. (It wasn't showing up in the Control Panel before I tried to use the disks, either.) I'm using Windows Vista. Thanks for any help you can give me.
Nevermind. I found it by searching Google. "Error 2343.Specified path is empty" | Install | Windows
-
When uninstalling an older version of reader, I get an error message about transform paths
I tried to uninstall version 8.1.2, and I get an error message to verify that the specified transform paths are valid. Some body please help. I could use the 90mb of space it's taking up.
My system is a laptop, vista 32 bit. No security update issues are involved. I am running version 10, and simply want some memory back.Claudia, thanks for the link. It removed the old version in about 30 seconds Microsoft Fixit looks like a great repair tool. Thanx for the hook-up. Redbaron8.
Think of your family and friends often.
Always keep an eye on your enemies,
and be sure you know the difference between them!
Willy
Date: Thu, 12 Jan 2012 09:35:24 -0700
From: [email protected]
To: [email protected]
Subject: When uninstalling an older version of reader, I get an error message about transform paths
Re: When uninstalling an older version of reader, I get an error message about transform paths
created by Claudio González in Adobe Reader - View the full discussion
If you feel you need erasing 90 MB. I would suggest getting some additional storage medium (external HD, ...). In any case, you may want to try the following: Run this fix from Microsoft: http://support.microsoft.com/mats/Program_Install_and_Uninstall Uninstall Reader using Add/Remove Programs
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4135555#4135555
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4135555#4135555. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
cannot go to cmd+V or S, I cannot change my password. -error message ===boot file path system library coreservices boot.efi.... Please help.
Got it thanks macjack . Command + S on restart.
In this case Nad69-Breizh did you try restarting with the option key down and re-selecting the boot drive.
If no Recovery option, try command option R for internet recovery. Takes some time to load up. -
Is anyone else getting an error message from Windows Installer that says it cannot find the correct path to install ITunes 10.5?? Or when trying to install it, it says that the older version cannot be removed?? I NEED HELP!! I want to upgrade my phone to iOS 5 and cannot without iTunes 10.5!
i think im getting this problem! ive got loadz of windows updates that wont update and i seen somewhere that that has something to do with why itunes wont download properly:/
-
LSMW error message during "Start Idoc generation"
Hi ,
I am getting error message "'/tmp/YS.lsmw.conv' File Has Not Been Accepted for Processing"
during the step "Start Idoc generation" in transaction LSMW.
Please help to solve this issue.
Thanks & regards,
YogitaHi,
I already have set port and partner function.
As per the details of the error message, it says "
System Response
Clarify if the inbound file is a Unicode file.
Procedure
If it is not a Unicode file, change the port definition and then start inbound processing again.
If it is a Unicode file, then the file must be generated with the 'EDI_DC40_U' indicator. This must be clarified with the creator of the file.
I have added the check Unicode fomat while defining the port.
Can you please help?
Regards,
Yogita -
I keep getting an error message about Network Path
I am using ADE 4.0.3
The book I am trying to download is called ICC Uniform Rules for Demand Guarantees. Error message I receive is below.
ICC Uniform Rules for Demand Guarantees:
IO Error on Network Request.
Please check your network connection and try again.
Network Path:
http://ebooks.coastlinesolutions.com:8080/media/1a94f1fb-41d2-4673-8639-321287b04a73.pdf
Event Detail:
Error #2038
--- end ---I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Error Message:PRVF-3929 - PATH environment variable.
Hello,
I am trying to install Oracle on my laptop and getting the following error message resulting into hault of installation.
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:Indrajit-PC
INFO: Expected Value:1023
INFO: Actual Value:1159
INFO: Error Message:PRVF-3929 : Adding the Oracle binary location to the PATH environment variable will exceed the OS length limit of [ "1023" ] for the variable on the node "Indrajit-PC"
INFO: Cause: The installer needs to update the PATH environment variable to include the value "%ORACLE_HOME%/bin;".
However, doing so will cause PATH to exceed the maximum allowable length that this operating system allows.
INFO: Action: Ensure that the sum of the lengths of your current PATH environment variable and that of
"%ORACLE_HOME%/bin;" does not exceed the operating system limit.
Restart the installer after correcting the setting for environment variable.
Oracle Database Trying ton install - win64_11gR2
MY PC CONFIGURATION:
- Windows 7
- 64 bit
Can you please help me getting this solved please.C:\>Set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Indrajit\AppData\Roaming
asl.log=Destination=file
CLASSPATH=.;C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=INDRAJIT-PC
ComSpec=C:\Windows\system32\cmd.exe
COPLIB=C:\Program Files (x86)\Teradata\Client\13.0\CLIv2\
DataConnectorLibPath=C:\Program Files (x86)\Teradata\Client\13.0\bin
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Indrajit
JAVA_HOME=C:\Program Files\Java\jdk1.7.0
LOCALAPPDATA=C:\Users\Indrajit\AppData\Local
localtd=1
LOGONSERVER=\\INDRAJIT-PC
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\Program Files (x86)\AXSMOD;C:\Program Files (x86)\Teradata\Client\13.0\A
XSMOD\;C:\Program Files (x86)\Teradata\Client\13.0\bin;C:\Program Files (x86)\Te
radata\Client\13.0\bin;C:\Program Files (x86)\Teradata\Client\13.0\CLIv2\;C:\Pro
gram Files (x86)\Teradata\Client\13.0\ODBC Driver for Teradata\Lib;C:\Program Fi
les\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Fil
es\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\Syste
m32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\ATI
Technologies\ATI.ACE\Core-Static;c:\Program Files\WIDCOMM\Bluetooth Software\;c:
\Program Files\WIDCOMM\Bluetooth Software\syswow64;;C:\Program Files\Dell\DW WLA
N Card\Driver;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\
QuickTime\QTSystem\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;
C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft
SQL Server\100\DTS\Binn\;C:\Program Files\Java\jdk1.7.0\bin;C:\Program Files (x
86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Teradata\Client\
13.0\Shared ICU Libraries for Teradata\lib\;C:\Program Files (x86)\AXSMOD;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 37 Stepping 5, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=2505
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
QTJAVA=C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Indrajit\AppData\Local\Temp
TMP=C:\Users\Indrajit\AppData\Local\Temp
USERDOMAIN=Indrajit-PC
USERNAME=Indrajit
USERPROFILE=C:\Users\Indrajit
windir=C:\Windows -
Can not download and install Itunes 10 - Get this message "The folder path 'Program Files' contain an invalid character. I tried to uninstall my old Itune through Control Panel but get the same message. What do I need to do?
Perhaps try the following user tip with that one:
"not a valid short file name" and "invalid character" install errors -
LSMW: Error concerning the logical path in Specify Files step
Hi,
I am trying on an ECC 6.0 EHP6 system to upload (open) POs from an existing SAP ERP system. Since I faced some complications in batch input recording method, I decided to go with the standard batch/direct input method.
I selected object 0085 (Purchase Order) and method 0001 (Purchase Order). The program that is used is RM06EEI0. I followed all the usual steps, but in the "Specify Files" step I get the message:
'****.lsmw.conv' does not exist; edit the logical path using transaction FILE
Being aware of both the FILE and SF01 transactions, I created the logical path and file (through the FILE transaction). However, after the modification, I get the message:
Logical file '****' is not assigned to physical file '****.lsmw.conv'
There is also the related SAP Note 753511 (Logical and physical path and file name in transaction LSMW) that refers to this case.Hi,
Click on specify file radio button>Legacy data-on the PC Front end
where input file location like C:\mydocument\desktop\test.txt
and give input in Name field: mydocument
in delimiter section > select Tabular
File structure section> tick on Field order matches source structure definition
File type: Record end marker(Text file)
then press enter key and other steps as same.
Second thing you said that you have used Batch input recording
after creation and recording finish , scroll the page below on recording and put a cursor unwanted field and remove unwanted input field.
I hope your problem will resolve. you can find the steps pdf on Google search try now.
Thanks
Sanjeet Kumar -
Hi,
While doing LSMW, step-3 Maintain Source Fields I have encountered the following problem
"Error when uploading file 'D:\Documents and Settings\ethirajan.v.raghavan\Des' (return code 13)."
Message no. /SAPDMC/LSMW_OBJ_020015
Can someone guide me to rectify this step by step?
VengatHi,
I have sent you an Attachment.. to your mail ID
Check it once.
Anand K
Edited by: Anand K on Mar 6, 2008 1:46 PM -
LSMW Error -Message no. M3039
HI
While i am uploading the Material master Sales View data system is showing the error
for uploading the material master i am using the transaction code MMZ1
Countries still missing, for example, IN
Message no. M3039
at the time of creating manually through MM01 & MMZ1 there is not issue while doing the LSMW only i am getting the error
please guide me how to solve the issue
Regards,
AnuThanks for Reply
i checked OSS note by still i am clear what it is mentioned is Assign Country to Sales Org, Plant and Assign Sales org, Company code
The relevant settings are:
- assignment of plants to sales organization
- assignment of country to plant
- assignment of country to sales organization (via company code)
- tax per country.
i have done why still system is showing
please guide me how to solve the issue
Regards,
Anu -
Error Message: "This upgrade path is not supported"
Scenario
During the process of upgrade to Windows 10 Technical Preview, we may encounter the error “This upgrade path is not supported. Please close Setup and re-launch from the root of the media or go back and pick a different installation
choice.” in the Compatibility report.
Analysis
Step 1: Perform the scenario 1: the upgrade installation fails.
Reproduce this error following the steps below:
Download the Windows 10 Technical Preview ISO installation file.
Extract the ISO installation file to C:\New folder, and now the location of the installation file is
C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\.
Click setup.exe from the installation file, and then click
Install now.
Setup is starting, and then get two options Upgrade and
Custom which is the classic setup wizard which we can see during booting from DVD.
Click Upgrade to run upgrade installation, however, the error occurs.
It seems that it is impossible to perform upgrade installation to Windows 10 Technical Preview, although it is fine to click
Custom to perform clean installation which cannot keep the personal setting and applications.
However, what we want is upgrade installation, not clean installation.
Step 2: Perform the scenario 2: the upgrade installation works fine.
If extract the ISO installation to C:\New in the above step2, click the
setup.exe from the installation file C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\, the upgrade installation would work fine, which is as shown the following two figures:
Step 3: Check the setupact.log
file which contains information about setup actions during the installation of the two scenarios.
Scenario 1: Check the setupact.log file of the scenario 1. The detailed information is shown as below:
2014-10-14 19:03:40, Info UI Determining whether we should run ConX or legacy setup
2014-10-14 19:03:42, Info UI Will launch ConX setup experience
2014-10-14 19:03:42, Info UI Launching ConX setup experience
2014-10-14 19:03:42, Info UI Launching C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
2014-10-14 19:03:44, Info UI Unknown command line for ConX setup experience. Launching legacy setup experience.
2014-10-14 19:03:44, Info UI Determining if we are in WDS/Unattend mode
2014-10-14 19:03:44, Info UI No need to hide autorun
2014-10-14 19:03:44, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2014-10-14 19:03:44, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2014-10-14 19:03:44, Info UI AppWindow has layout style 0
2014-10-14 19:03:45, Info UI NavWindow has layout style 0
2014-10-14 19:03:45, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-10-14 19:04:57, Info [0x0a018e] UI Passing command line parameter ("C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
Scenario 2: Check the setupact.log file of the scenario 2. The detailed information is shown as below:
2014-10-14 19:08:04, Info UI Determining whether we should run ConX or legacy setup
2014-10-14 19:08:05, Info UI Will launch ConX setup experience
2014-10-14 19:08:05, Info UI Launching ConX setup experience
2014-10-14 19:08:05, Info UI Launching C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
According to the two logs, we can get the following points:
In scenario 1, it would invoke the SetupPrep.exe in the source folder directly to perform an installation preparation. However, it failed to recognize the path
C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe. Then it would launch legacy setup.
In the scenario 2, Windows setup would be redirected to the ConX setup to perform upgrade installation automatically.
So, what is the difference of the scenario 1 and 2 to bring the different results of upgrade installation?
Workaround
Based on lots of testing, we find that if there is no space in the extracting location of the ISO installation
file, the upgrade installation would work fine.
What’s more, we can get the meaning of the two setup models in the setupact.log:
Legacy setup: it is same with setup from DVD boot.
ConX setup: it would check the compatibility and language UI for upgrade preparation, then perform migration and upgrade directly.
Additional Resource
From the release of Windows 10 Technical Preview, many users have installed and tested Windows 10 Technical Preview, we still hope more and more users would download and install Windows 10 Technical Preview for test, and provide
us your feedback.
Download Windows Technical Preview
http://windows.microsoft.com/en-us/windows/preview-iso
Download Windows Technical Preview for Enterprise
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-technical-preview-for-enterprise
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Hello,
I would guess that existence of a space in the folder name is what the issue is. Try removing the space from the folder name and see if works. New_Folder for example
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.
Maybe you are looking for
-
Hi, i want to print a HTML-formated Page without the tags and whit pictures in the page, i think thats also called WYSIWYG. How i can do this ? Is there a possiblility to convert HTML to printerfriendly format like RAW ?
-
SA: BerkeleyDB not available...
Hello everybody, is there an explanation, why amavis is giving me this error on a standard mail installation of OS X Server 10.4.3 -> 10.4.4? (You only see the error if you chance the protocol level to debug.) "BerkeleyDB not available, using memory-
-
How to always rotate objects around the same point, even using the right-click menu?
I need some of my objects to always rotate around the same point. How can I select a point which will stay that way? Using the rotate tool resets after deselecting. Also, I'd like to rotate objects around a certain point even when using the right cli
-
Can't use old AI materials in AI CS6?
Hi. I've been using Illustrator to draw certain parts of illustrations-like surgical instruments in a drawing otherwise done by hand or in Photoshop-through many versions of Illustrator. CS3, CS5 and now CS6. And I'm having trouble now making use of
-
Adobe Elements 7 - Jumpy Video
i'm trying to make a video using an avi file i have on my computer. the file plays perfectly outside of adobe, but as soon as i start editing it in elements the preview and final product are both really jumpy and skips alot. help? i tried to add a vi