LSMW- Error :No target structure could be found.

Hi All,
In LSMW I'm using Business Object BUS1001006 and Method SAVEDATA.
Which is working fine in Development system and Testing system. But the problem is in the production system.
At the 4th step (Maintain Structure Relation )in LSMW  I'm getting an error ' No target structure could be found. '.
It would be thankful if any one could suggest me how can we solve this problem?
Thanking you,
Suresh

ok....fine....seems lke i found ur problem .
For using a bapi , u need to create ale message type ( tcode bdbg ) . Aftercreating message for this BAPI, the server will  generate a new ALE idoc message type, and  function inbound and outbound to handle this kind of idoc.
Next, you can configure the LSMW for BAPI ,(if you don't do the first step, the BO can't been choosen in the LSMW).
Then you choose the business object and method appropriately. The target structure of this LSMW scenario is the IDOC type of you create for this BAPI.
Remaining steps are like in normal lsmw .
You have to maintain settings for  inbound processing of idoc in each server seperately . Check wt u have done in dev\test server for inbound processing . Repeat the same in production server .

Similar Messages

  • LSMW-Error Msg:No target structure could be found

    hello friends,
    I was trying to upload data for 0000.0001,0002 using LSMW, 
    first 3 steps are recorded, but when i reach the the 4th step , m getting an error msg :<u><i><b>No target structure could be found.</b></i></u>could u plz suggest y this error is coming and where to maintain the target structure.
    many thanks
    desia

    Hi
    U made the structure in the step2 and step3 thats fine
    Now   you are  at step3 u r uploading or adding by ur own all the fields to structure
    I mean to say did you able to see it?
    Create a structure you can find all the structure fields at the time of creation of recording
    Means
    You can view that go to the first Step --- Execute it and display/change it -
    Overview -
      you can see the recorded struc -
    double click on that to view whole struc.
    Now you have to make the structure in the notepad according to the fields you have recorded only what you have to change not default.

  • Lsmw by Idoc creation-NO Target Structure Cound be Found

    HI,
    I m Naveen. i m facing a problem in LSMW. i m having huge data of inforecords and i m using LSMW for uploading.
    i m create LSMW by IDOC processing and i m stopped at 4th step where i have to "Maintain Structure Relations" but the target structure is not coming and it not allow to go inside the tab and gives Error "NO Target Structure Cound be Found". kindly sugget me what to do.
    wait for your valuable inputs.......
    Naveen

    Post this thread in ABAP forum. You may get better solutions there.
    Umakanth R

  • I*sqlplus: Internal error (no valid library could be found)

    Hello
    I have installed Oracle 8.1.7 on Windows NT
    and Oracle 8.1.7 on Sun Sparc Solaris.
    On Windows NT, I have installed i*sqlplus.
    However, when connecting from browser
    in the index file
    I've given a valid username/password of
    a database in Oracle 8.1.7 on Sun Sparc
    and a connect string to the database
    on Oracle 8.1.7 on Sun Sparc.
    This connect string is created using
    Net 8 assistant and this connect string
    is on the Windows NT with Oracle 8.1.7.
    However, instead of connecting I
    am getting the error
    Internal error : (no valid library could be found)
    Can you please help me?
    Thanks

    Cyril,
    Can you connect to the database using the command line version of SQL*Plus? If so, you're using the correct syntax.
    It sounds like iSQL*Plus is not set up correctly. Do you have the necessary 8.1.7 components on the NT machine (Oracle HTTP Server, Net8, SQL*Plus)?
    Review the installation documentation, and/or post more specific information on your set up.
    Alison
    iSQL*Plus Team

  • ISQL*Plus: Internal error (no valid library could be found)

    I install iSQL*PLUS on middle tier (9i AS 1.0.2.1) according to documentation, when I trying to connect I am getting Internal error (no valid library could be found). The TNSNAMES.ORA file is correct.
    Any suggestions will be highly appreciated.

    My first suggestion is to use the HTTP listener on the RDBMS bundle. This is what iSQL*Plus 8.1.7 Beta was built for.
    The HTTP servers on the iAS and Database releases require mods to be compiled differently.
    - CJ

  • I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on it. HELP!! What's going on? This happened after I downloaded Chrome and then

    I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on a link. HELP!! What's going on? This happened after I downloaded Chrome and then decided to delete it. 

    I have Lion and I just came across this link and it took care of the problem.
    Jose Antonio Solis
    Re: Lion: Delete google chrome completely include user profile?
    Try deleting:
    ~Library/Application Support/Google
    and
    ~Library/Caches/Google/Chrome

  • Error- No partner profile could be found [Idoc(KU) to File(LS)

    Hi Experts,
    I am creating Idoc to file scenario i.e KU to LS
    I have already created an outbound partner profile using transaction WE20.
    SNTPRT- Partner number - 1100024          RCVPRN Partner number  - PEVCLNT100
    Partner Type- KU                                        RCVPRT Partner type  - LS
    It is showing below error in We19 :-
    Entry in outbound table not found
    No partner profile (outbound parameter) could be found using the following key:
    /PEVCLNT100/LS//DELINF////
    What could be the problem ?
    Regards,
    Anshul

    Hi,
    Go thru the following threads...might help you..
    Entry in outbound table not found
    Re: Outbound Program using ALE/IDOC
    Regds,
    Pinangshuk.

  • Reader 10.1.1 install error--"No valid sequence could be found for the set of patches."

    At 96% completion of Reader install Windows gives above error msg. I close that window, then new window says "Installation complete." I click finish. New window opens with "Installation successful - you are now running Adobe Reader." Yet Reader does not show up as installed; unable to open pdfs. Thanks for any help.

    Solution provided by pwillener on similar problem was tried. Reader downloaded, installed and seems to be working fine now.............   Many thanks !! 

  • TS3276 Links in recieved email won't work.  Message shows up:  "Error:  no associated application could be found"

    None of the links in any of the four email accounts I have in Mail will work.  If I click a link within the email, I get an error message as above.  I can't figure out how to fix it.

    Not exactly sure which action is responsible, but full function has been restored. I restarted computer and I "refreshed" Firefox. One way or the other the problem has been resolved.

  • Mail dont open URL (links) Error No associated application could be found.

    I started with, YES, Safari is my Default web browser...
    quick look work OK.
    I have two profiles on the same machine (with same problem..)
    I have tried alredy:
    delete mail folder - Did not help
    rename com.apple.LaunchServices.plist -  Did not help
    use OnyX/Maintenance - Did not help
    Do you have to ideas?
    Thank you
    Dror

    OK , I found the solution,
    I boot my Computer and select "OPTION"
    I boot from USB with 10.8 system
    (Lion DiskMaker)
    http://blog.gete.net/lion-diskmaker-us
    and select reinstall my system.
    Work and fix the problem...

  • "No certificate templates could be found..." error using web enrollment on Win2k8 R2 Enterprise SubCA

    Hi Folks,
    I have installed an online issuing CA running on Win2k8 R2 Enterprise, and installed the web enrollment role service on it.
    I have duplicated two computer certificate templates (computer & web server) on our DC's, modified them as Win2k3 templates, made some changes and saved them, then published them on the CA by selecting New -> Certificate Tempate
    to issue. The templates have read and enroll permissions set for domain admins and domain computers (my account is a domain admin). I can successfully enroll for them using the certificates MMC.
    When connecting to https://myca.mydomain.com/certsrv however, the page loads. I click on 'Request a certificate', then 'Create and submit a request to this CA'. I see a warning indicating that this website
    is attempting to perform a digital certificate operation on my behalf, so I click yes. Immediately after doing so, I get the error:
    "No certificate templates could be found. You do not have permission to request a certificate from this CA, or an error occurred while accessing the Active Directory."
    I have spent about 2 hours searching on this error and found at least 50 people complaining of this, but no real solutions. Here is what I have tried with no success:
    1) http://support.microsoft.com/kb/811418. Everyone references this solution, but it hasn't worked for anyone. The string values and cases are the same for me.
    2) Enabled SSL on the certsrv website.
    3) Set the authentication on the certsrv site to enable integrated authentication and disabled anonymous authentication.
    4) Created a separate application pool running under the Network Service then set the Certsrv application to run under it.
    I should note that this exact same condition occurred in my lab install, but rather than waste time trying to fix it in the lab, I just went ahead with the production install, only to experience the same problem, so apparently web enrollment is just
    broken out of the box on 2k8 R2 Enterprise.
    Does anyone have any idea how to get this working as advertised? Thanks for any help,
    Ian

    It appears to be an issue in Server 2012R2 as well.
    In our case, is a new two tier PKI setting is implemented on two Windows Servers 2012R2. After the installations and configurations are completed, I was unable to load certificate templates when requesting a certificate on the Web interface.
    The issue was that the pass-through authentication did not work in IIS with the standard Application Pool Identity.
    The solution was as followed:
    1. Changed the NTFS permissions on the certsrv virtual directory in IIS (C:\Windows\System32\CertSrv\en-US), by adding a (domain) user account with read and list permissions.
    2. In IIS CertSrv > Basic Settings > Connect as - select "Specific user:" and set the newly created user with the username and password.
    3. Tested in Basic Settings with - "Test Settings" button and both Authentication and Authorization were successful.
    4. Request certificate from Web interface and the templates are available.
    Note: You must have a certificate in the Templates store which you have duplicated from the Templates available.

  • No article document could be found for cancellation" with Message no. VL622

    Hi Experts
    when I am Reverse the goods movement( for delivery cancel ) in VL09 I am getting error "No article document could be found for cancellation" with Message no. VL622.
    I am unable to delete the delivery and the delivery is not allowing me to do GR also, while In warding (GR)
    I am getting error "PL Stock in transit exceeded by 56 EA : 300387450 0611 10" Message no. M7022
    even though PGI is finished for Delivery, stock is not reduced. It is still showing in supplying site only
    Kindly help me out to delete the delivery or to do the GR.
    Regards
    sudha

    Pls refer sap notes 331758

  • No article document could be found for cancellation

    Dear All
    when I am Reverse the goods movement( for delivery cancel ) in VL09 I am getting error "No article document could be found for cancellation" with Message no. VL622.
    I am unable to delete the delivery and the delivery  is not allowing me to do GR also, while In warding (GR)
    I am getting error "PL Stock in transit exceeded by 56 EA : 300387450 0611 10" Message no. M7022
    even though PGI is finished for Delivery, stock is not reduced. It is still showing in supplying site only
    Kindly help me out to delete the delivery or to do the GR.
    Regards
    sudha
    Edited by: sudha on Sep 24, 2008 2:14 PM

    Hi ,
    Pls refer sap notes 331758

  • COPA extraction: RD155 No source could be found to answer the search query

    Hi Everyone,
    I'm trying to schedule an init. load for the new fiscal year from an Account-based 1_CO_PA** extractor. I've entered restrictions for Controlling Area (single entry) and Fiscal Period (PERIO) 001.2011 - 001.2025.
    When I try to schedule the init. load or even test the extraction in RSA3, I get the error message 'No source could be found to answer the search query'. I've checked my summarization levels and and they have the value '*' for all characteristics.
    If someone can provide an explanation for the error message, it would be most helpful.
    Thanks,
    Ram

    Hi Ram,
    This error is almost always caused by incomplete or incorrect customizing:
    In addition, the summarization level must have status 'ACTIVE' (this applies also to the search function in the maintenance transaction for CO-PA data sources,KEB0).                                                                               
    Please also review the SAP note 392635 which is release independent and has further information on the customizing and CO-PA extraction:                                                                               
    392635 - Information: Sources with BW extraction for account-based    
               CO-PA                                                        
    So please check your customizing and the note 392635 carefully in particular please pay attention to the following:                                                                               
    There has to be one (single)  summarization level that contains all characteristics (except for  the controlling area) with '*' in the   
    characteristics view in  transaction KEDV and has status 'active'.   
    After checking the above you need to replicate the datasource in the connected BW system and reactivate the transfer rules.               
    Best Regards,
    Des

  • Message no. RD155 -- No source could be found to answer the search query

    Hi All,
    while checking my new COPA datasource in RSA3, I get the Error message No source could be found to answer the search query Message no RD155.
    I have maintained the summarization levels which is in a status of "Active Without Data". Also note, the tables for CE1XXXX, CE2XXXX & CE3XXXX do not contain data. However, CE4XXXX table does contain data.
    Kindly help.... its very very important and i need to finish this datasource ASAP

    Hi
    I am unable to implement both the notes as I am already on a higher version of PI_BASIS.
    I have replicated my datasource into the BW system..
    While doing the INIT load without DATA TRANSFER, i do not get any error message, however, while doing a Delta it does not bring in any records but does not fail as well
    However, if i delete the initialization selections and load the data using the setting INITIALIZATION WITH DATA TRANSFER or Full UPDATE, the data load fails with the ERROR MESSAGE "Errors occurred in data selection."
    Please help... This issue is very very important and i need to deliver it ASAP
    Edited by: Sneha Santhanakrishnan on Jun 24, 2010 9:29 AM

Maybe you are looking for