LSMW: error when import source file which contains other language character

When I use LSMW to import master data,
on the step,"Specify Files",there are
two choice for code page,"ASCII" "IBM DOC",
but neither of them can work correctly,
both cause chaotic code.
for example "#ãb####բ##"

Hi Colin!
I'm working with English and Cyrillic input files. As long as I don't use English file for the Russian application, all works well.
I figured out two important points:
- Log-in in 'target' language. This has to set locale and language defaults -> LSMW will asume correct codepage (when your system has correct default settings).
- Save your text file with correct codepage. With MS Word or MS Excel I haven't seen detailed options, but with OpenOffice  you can set codepage when saving files with '*.csv'-filter.
Regards,
Christian

Similar Messages

  • Header Error when importing Wav files

    The problem I'm experiencing is that Premiere CS6 will not import my Wav audio files. When I try to import them it gives the following message and fails to import the file:
    "The file cannot be opened because of a header error".
    The original audio file, which opened happily in FCP 7 (I'm migrating the project to Premiere from a previous Final Cut Pro project) is in the following format (as described in the Movie Inspector of QuickTime Player):
    Linear PCM
    16 bit little-endian signed integer
    2 channels
    48000 Hz
    Although the files won't open in Premiere, they will open in Adobe Audition, which gives their bit depth as 32 (it also describes the original format as "16 bit little-endian" - I confess that this technical side of sound files is unclear to me).
    Any suggestions of how I can coax Premiere into importing and opening these files?
    Thanks, Andrew

    Perhaps some of the suggestions in this thread: http://forums.adobe.com/message/4713932#4713932 will be helpful?
    Good luck,
    Hunt

  • Illustrator shows BG error when importing ai files made in Flash

    Hello Everyone!
    I've been using Flash for a couple of years now... I use it
    mostly for designing fashion graphics (!!!). I know that
    Illustrator is excellect for creating artwork, but I am a big Flash
    fan and can't help it :) Of course, I have to use Illustrator from
    time to time which makes it a bit tricky when importing modified
    Flash files.
    I export Flash files as AI ones, but encounter numerous
    errors while opening such files in Illustrator. I think the problem
    is with the Color settings. Flash uses RGB, and CMYK is
    Illustrator's default settings. When I try to export a graphic
    symbol (with layers, groups of objects and simple shapes) from
    Flash Professional as an AI file, it always exports as Illustrator
    6.0 version (wonder why)... Then I try to open this file in
    Illustrator CS2 and always get a "BG" error message which is
    similar to this one:
    Can't open illustration. The illustration doesn't have the
    correct number of operands for an operator.
    Offending operator: "Bg"
    Contex:
    Bb
    0000 Bh
    1.0.0.000819.20.....etc. (lots of figures)...Bg
    So after getting such a message and pressing "OK" there are 2
    possible results:
    1. The program (Illustrator CS2) opens a blank artboard
    (stage) with absolutely NO objects or symbols on it.
    2. The program opens an incomplete graphic on the artboard
    (stage) with many missing objects and shapes (say, if I exported a
    graphic with 2 layers, the top layer will be missing).
    Unfortunately, these are the most common results....Though a
    few days ago I hkept several AI files open and tried to export an
    AI file made in Flash. To my greatest surprise Illustrator could
    open the file with absolutely everything I exported from Flash!!!
    Except for Bitmap fills, of course....But everything else was just
    perfect! I was amazed no end!
    Like an idiot I didn't save the file, and the next day I
    spent 2 hours trying to get the same result...which I didn't. Never
    did since then...Though I used the same graphic over and over...
    So my question is...What settings should I have in order to
    be able to open AI files exported from Flash? If I got it once, it
    means it is possible to open such files...
    I would greatly appreciate if anybody could help me find a
    way out of this situation. I have to use Illustrator more often
    now, and I need my artwork to be convered to AI files without
    significant modifications or corrections... Is it doable?
    Thank you so much in advance!!
    Ella

    Did you ever find a solution to this?
    I need to export characters from Flash files to use in Illustrator, but I keep getting "offending operator bg" messages.

  • Import error when importing .psd file created in Photoshop CS3

    I have a file that was created in Photoshop CS3. I am trying to import this file into Catalyst CS5, but I keep getting an input error. I created a file in Photoshop CS5 and I was able to import this .psd file successfully into catalyst. So I guess my question is this; Does Catalyst support .psd files created in Photoshop CS5 only? If this is the case, how can I convert the CS3 .psd to a CS5 .psd

    I am now building my files using photoshop CS5. A few challenges I have experienced while trying to import into Catalyst:
    - If I do a straight import into Catalyst, I loose all my colors in Catalyst. That is, catalyst imports all my vectors without any of the colors I had in Photoshop. My understanding is that Catalyst has libraries to support Photoshop files, so your import from Photoshop should not look any different in Catalyst.
    Work Around: I have had to rasterize / merged all my image layers for the different components I have built in Photoshop CS5. Then when I start the import process I click the Advanced button on the catalyst import dialog. From the advanced dialog, I have to flatten (to bitmap) all the images I intend to import.
    This process takes about two hours because I have a lot of components on the page.
    Is there something  I'm not doing right here? I'm not seeing the value add to Catalyst, if it's taking me this long to just import .psd files

  • Error when importing EPS files in Publisher 2010

    Whenever I attempt to insert an EPS file (possibly other image types as well) into a Publisher document I get a prompt asking for what type of file the source is and then this error:
    "An
    error occurred while importing this file."
    This is running as a Citrix Published Application running on Server 2008 R2 and I've found that this does not happen outside of Citrix.  If i login directly to the server via RDP or right from the console I do not get this issue.  I've posted in
    the Citrix Forums and it looks like this is something to do with MS Publisher and not being able to use the Explorer shell.
    http://forums.citrix.com/thread.jspa?threadID=307437
    Researched this error and found this article:
    http://support.microsoft.com/kb/224744 (This is unacceptable since the file needs to be in EPS format to keep functionality)
    There was another article but I cannot find it for the life of me at this time but it suggested that you uninstall and reinstall Office or repair Office.
     I did both with no luck.
    I am able to get Citrix to open up publisher with the shell by initiating this command:
    explorer.exe /root,D:\Program Files\Microsoft Office\Office14\MSPUB.exe
    With this command firing up Publisher I'm able to import EPS files with no problem.  However I cannot pass an argument to this command so double clicking documents in our Citrix portal do not open up the document but rather just opens up a blank Publisher
    file.  So this isn't a good "solution."
    I should not have to make this command to just be able to import images as a workaround.  Anyone run into this in their Citrix environments?  Microsoft, do you have anything that can be tweaked with Publisher to allow this to work as normal in
    a Citrix environment?

    I was able to get a workaround for this. I made a .cmd and put this into it:
    if [%1]==[] explorer2.exe /root,D:\Program Files\Microsoft Office\Office14\MSPUB.exe %1
    if [%1] NEQ [] "D:\Program Files\Microsoft Office\Office14\MSPUB.exe" %1
    You will need to change your paths to your MSPub.exe and if you are using explorer.exe change that as well.  We use explorer2.exe since we've found issues with using the original explorer.exe.
    Once you have that CMD file made.  Save it to your Xenapp boxes in the same location and then point your published app to that file to launch Publisher.
    This worked for us but I'm not sure  if it will work for anyone else but give it a go and let me know.

  • Error when importing psd files into Premiere Pro

    I am using Adobe Premiere Pro CS4 and Photoshop CS4.  Whenever I attempt to import a psd file I get this error message:  "File format not supported".  I have tested it with different file sizes and properties.  My files are RGB and 8 bits/channel.  Is there any way to resolve this problem?  I am also using Adobe After Effects and importing psd files works great with it. 
    Thanks

    Welcome to the forum.
    The RGB and 8-bit take care of two possible causes, so thanks for getting those out of the way early on.
    Does the PSD file contain Layers? Are any of them mostly Transparent, with just a few pixels, such as a small logo? Those have created issues.
    What is the exact version of CS4, that you are running? Seems that there WAS an issue with PSD's in an earlier version, and that a later update fixed that.
    There is another element with PSD's, that has caused issues, but my feeble mind is suddenly blank on what that was about. Seems that Colin Brougham commented on it not that long ago. I'll see if I can drege up one of those threads, but you might aslo want to do a Search on "PrPro" and "PSD," though the forum Search might still be broken. Maybe Google, and also look for replies from Colin. I'll do the same too. IIRC, one had to Open the offending PSD in PS, and just do a Save_As with a short file name, and a short Path (not buried deeply inside a sub-folder structure), and all was good, but do not recall any other details at the moment. I would also eliminate any spaces in the new file name, just to eliminate any issue there - use the _ like in the old DOS days, though do not think that one had to adhere to the old 8.3 structure.
    Good luck,
    Hunt

  • CRM2013 - Error When Import Solution File

    Hi, Can I know why I unable to import solution file ?
    and show me the following error.
    What can I do to fix this problem??
    Thank you!

    Hello Kenny Chan,
    Looks like you need to import the solution called DynamicsXRMTools first (you can see it on the Managed Solution column of the screen).
    This means the solution you are trying to import contains components that are dependent of the solution DynamicsXRMTools and by that reason you are unable to install your solution.
    Let us know if it works.
    Best Regards

  • Generic error when importing .mxf files

    Hi, this will be my first time editing MXF files from the Canon XF100, but when i import them to Premiere Pro CS6, non updated version u get that the fil can not be imported because of a generic error. I usually work with AVI. I am on a Windows 7 64 bit with a quad core 3.3 and 8 gb ram 1667 mhz. I have not downloaded any software except the Canon XF Utility. Anybody who can help me? And yes i imported the whole File map with SIF files and MXF files, and in the map there are also XML and XMP.
    Thank you on beforehand§

    How do you import the footage?
    Ulf

  • File error when importing .mp4 files

    Hi there,
    I have a problem concerning importing files.
    I had some .mkv files, which I converted to .mp4 files with just 1 audio track and no subtitles using Handbrake.
    Problem is, I can't import these files into Final Cut Pro 7.
    It gives the following error:
    "File error: 1 file(s) recognized, 0 access denied, 1 unknown."
    I have no problem importing .avi files, or .mp4 files that haven't been converted.
    Does anyone know what I should do? I don't know any other program to convert .mkv files, so basically, I'm bound to using Handbrake.
    Thanks in advance!!

    I didn't know Handbrake was such a bad tool.
    I never did much video-editing before, so I usually used iMovie, and the Handbrake-converted files worked fine with that.
    And I did what you said, I converted the video to .mov with MPEG Streamclip, using the mentioned presets, but now I have another problem.
    A 22 minute file, which was 360MB before converting, turned into a 6.2GB file after converting.
    Since I use videoclips from a TV Serie, which has over 60 episodes, this is going to cost a lot of space. Is there any way to reduce the filesize without destroying the video quality, or is there any, ANY, way to make FCP accept .mp4 files?
    I don't care if it slows down my Mac or anything, it's just that I know it's possible, with the 700MB file from one of my posts above.

  • "Red Error" when importing video files

    Hello, I tried importing video files (.MOV) into Final Cut Pro X but this "red file error" just comes out and I don't know what to do.  I even tried importing my video clip from my iSight camera but it just shows that red error. I feel like every video file imported gets "redded". I don't know how to solve this problem. Thank you all!
    - MT
    P.S. Final Cut Pro X 10.0.3

    You have "Proxy media" selected under Preferences->Playback, but you are not creating proxy media for your clips on import. That's why you get the red clips.
    This is easy to solve. Either:
    1) Create the proxy media for your clips, by control-clicking, and choosing "Transcode Media..." and checking the box for proxy media;
    or
    2) Choose "Original/Optimized media" in Preferences->Playback.
    Proxy media uses less disk space and is easier to handle than either the original or optimized media, but is of lower quality; but you can do all the editing in proxy, and then just before you are done, switch again to original/optimized. This way you get lower overhead when editing, and still get the better quality result.
    This may be even more relevant for older, less powerful macs, or when you need to use an internal drive, or a slow usb drive with FCP X. If you have a fast mac and a fast drive, you can work away without transcoding, for the most part (multicam clips and other heavier edits may still warrant a transcode).

  • Error when importing static files in run-time installation

    Hello all,
    I have a development environment running 3.2 and also a run-time test environment running 3.2. I'm trying to import an export of static files from the development environment into the test environment, and we're getting the following:
    SQL> @static_file.sql
    Set Credentials...
    Check Compatibility...
    API Last Extended:20090112
    Your Current Version:20090112
    This import is compatible with version: 20090112
    COMPATIBLE (You should be able to run this import without issues.)
    Set Application ID...
    ...static file repository
    declare
    ERROR at line 1:
    ORA-00001: unique constraint (APEX_030200.WWV_FLOW_HTML_REPO_IDX1) violated
    ORA-06512: at "APEX_030200.WWV_FLOW_HTML_API_PRIVATE", line 84
    ORA-06512: at "APEX_030200.WWV_FLOW_HTML_API", line 45
    ORA-06512: at line 6
    We've exported and imported these same static files in the past with no issues, and we also exported and imported two applications and an image export without issues.
    Any idea what is causing this?
    Thanks!
    John

    Update:
    I had two static files in my export - one was assigned to a specific application and one wasn't. When I ran into the issue importing, I had elected to export "all static files". I just tried it again, but exported and imported each of them individually, and it worked fine so I'm back in business.
    But perhaps there is an issue when exporting all files, when they aren't all assigned the same way? Maybe something to be looked into...
    John

  • Error When Importing Mp4 file

    I get this error message that pop up when I try to import:
    "File Error: Unknown File"
    What is the requirement for .mp4 or .mov files in order to have it imported to FCP? Also I have another large file that can be imported, but when I play it in the edit area, it lags and the video doesn't play smoothly....would I need to compress or would I need to convert to a certain frame per sec or something?

    Try opening up the video in QuickTime and export using the same codec, but make sure to select what the frame rate is (such as 29.97) and see if you can import it then.
    Dave

  • Error when importing XER file

    Dear all,
    When I tried to import XER file, it has error as the following :
    Type : Exception
    Event code : CVRCU-2518-3
    Description : TCCustomVirtualRow.CleanUpVarValues: Default value 800 provided for field day_hr_cnt is not valid.
    However, when I import XML file, it is ok.
    Please let me know why and how to fix it.
    Thanks and regards,
    Hoang

    Dear all,
    When I tried to import XER file, it has error as the following :
    Type : Exception
    Event code : CVRCU-2518-3
    Description : TCCustomVirtualRow.CleanUpVarValues: Default value 800 provided for field day_hr_cnt is not valid.
    However, when I import XML file, it is ok.
    Please let me know why and how to fix it.
    Thanks and regards,
    Hoang

  • Error when Import XSD file

    Hello expert,
       During creating Data Type in the build, I try to import XSD file, but system says:" XSD schema containing the construct "choice" are not permitted here"!
       I found in the XSD, there are this definition:
                                  <xsd:element name="EmploymentInfo" minOccurs="0">
                                       <xsd:complexType mixed="true">
                                            <xsd:choice>
                                                 <xsd:element name="FullTimeEquivalence" type="xsd:decimal"/>
                                                 <xsd:element name="WorktimeInfo" maxOccurs="unbounded">
                                                      <xsd:complexType>
                                                           <xsd:sequence>
                                                                <xsd:element name="Duration" type="xsd:duration"/>
                                                                <xsd:element name="Period" type="xsd:duration"/>
                                                           </xsd:sequence>
                                                      </xsd:complexType>
                                                 </xsd:element>
                                            </xsd:choice>
                                       </xsd:complexType>
                                  </xsd:element>
         Could anybody tell me how to handle this? I am not quite familiar with XSD. Thanks a lot.
    Best regards,
    Shouxin

    Hi,
    replace choice with sequence
    <b><xsd:complexType>
         <xsd:choice>
              <xsd:element name = “A” type=”xsd:string” />
              <xsd:element name= B” type=”xsd:string” maxOccurs=”unbounded” />
         </xsd:choice>
    </xsd:complexType></b>
    is handled identical to
    <b><xsd:complexType>
         <xsd:sequence>
              <xsd:element name = “A” type=”xsd:string” minOccurs=”0” />
              <xsd:element name= B” type=”xsd:string”
    minOccurs=”0” maxOccurs=”unbounded” />
         </xsd:sequence>
    </xsd:complexType></b>
    Regards
    Tarun Telang

  • Install iTunes 10.4.1 install error - The Folder Path "File Name" contains an invalid character

    Upgraded computer from XP Prof 32-Bit to Windows 7 Ultimate 64-Bit (Upgrade package, performed Custom Install).
    Attempt to install iTunes 10.4.1 for 64-Bit.  Receiving the following error/problem:
    The Folder Path "File Name on my external drive" contains an invalid character
    I click ok and then get this:
    The Installer encountered errors before iTunes could be configured.  Errors occurred during installation.  Your system could not be modified,  Please run the installer again, or click Finish to exit.
    Any fixes for this?

    Sorry, one of us is not managing to be clear enough.
    Does the message read The Folder Path "File Name on my external drive" contains an invalid character or perhaps The Folder Path "<some path name here>" contains an invalid character?
    If so, then the problem might be just what it says it is with the path name in question... Either way if you list the path given in the error message in a reply to this thread it might provide a clue for anyone tying to help with the problem.
    You could try downloading the installer to C:\iTunesSetup.exe in case that helps.
    tt2

Maybe you are looking for

  • Is there any way to print 6 Keynote slides in 2 columns on a page?

    I am using Keynote '08 and am trying to create a pdf file with 6 slides on each page, on two columns, in portrait format. Does anybody know how to do this?

  • Attach 2 adobe form with the first adobe form

    Hi All,       Can we merge the multiple adobe form into a single adobe form in CRM.  I appended both the adobe form content in a single internal table and tried to download PDF file using FM "GUI_DOWNLOAD" I was able to see only the first form. Could

  • Error Message after downloading, RED "X"

    I loaded Quickbooks 2008 Monday and Flash hasn't been the same. I get the "must download" error and when I download and check for the program in "Add or Remove", the Flash icon has a little red "X" over the upper right hand corner. The Flash works fo

  • Lens adapter Sigma to Canon

    Hi all, I have a Canon T3i and recently bought lens Sigma 24-135mm f/2.8-4.5, but I just realized that it doesn't fit in my camera. I would like to know if I can easily find an adapter and which one could be. I found one in Amazon, but I'm not sure i

  • Payables Documents Numbers

    While creating bank accounts in Payables, why are we not allowed to use the same document numbers again even when the Payment Methods differ? I understand that the numbers cannot be the same when the payment method is the same (checks, for example),