Lsmw for cl20n through batch input recording

Hi Experts
I tried to create lsmw using recording method for CL20N for uploading classification for rel object.
But i am unable to create lsmw.
Please suggest possible solution.
regards
ramSiva

Hi,
You can use the standard Batch input program(details below):
Object                0130   Classification
Method               0001   Batch input
Program name    RCCLBI02
Program type      B   Batch input
Hope this is useful.
Reetesh
Edited by: Reetesh on Dec 5, 2011 4:49 PM

Similar Messages

LSMW for Listings via Batch Input recording - Help ?

Hi
Has anyone had any luck with trying to upload Listings via LSMW at all ?
I have created on, via batch input recording
I have lots of records with entries from 1 to 16
I have recorded enough entries to cope with 16
However when i try to execute the batch session, if there is only 1 material that requires an entry, then i cannot get past this screen, the LSMW is wanting entries for the next line and so on
I presume I must have to put some sort of a ruling in per Material number it is expecting, so if it is not poupulated then to move on, but to save the entries that have already been made
I do not have much experience in writing rules into LSMW so
Any ideas / help would be much appreciated
Thanks
Tony

Hello Tony,
In the past I have suggested this to few people and were successful with this link, please try, but only thing you need to take care is use VB02 instead of XK01 with reference to this link what I am trying to say.
http://youtu.be/fz94PcvtdZw
Regards,
Sridhar.

Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
Regards
Fawaaz

Hi Guys,
Thanks so much for all the prompt responses. My issue is now resolved.
The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
Thanks again.
Regards
Fawaaz

LSMW, batch input recording, structured file

Hello,
I'm new with LSMW.
Is it right that with LSMW when used in batch input recording, it is impossible to use a structured file, with a header and with many item for exemple ?
( i try to do that with a financial transaction like F-02 )
Thanks in advance for any help.
(we are in WAS 6.20, LSMW 4.0 )
Denis

hai
can any one help me how to handle lsmw with two structures header & item data structures
how can i map the target structures to source structures
for example target recording structure have ematn_01
                                            ematn_02
                                   how to map these 01 and 02 to source structures
i have to take two source fields as ematn_01 & ematn_02
or i have to map only one source ematn to all emant_01
                                                   _02
                                                   _03
if there are n ematn's in that case how to map dynamically

Customized LSMW (Batch Input Recording) to upload data for Vendor

Hello Fiends,
can u help me on this object and how to upload in xk01.
Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
With best wishes,
Chandu.
Point will be rewarded....

Hi,
Go through the following link, you will find your answer
http://www.sapbrain.com
Regards,
Bhaskar

LSMW Batch Input Recording for Create BOM

Dear All,
I want to do LSMW for Creating BOM using Batch Input Recording,
I know that i have to make 2 time Recording, first for the BOM Header and second for the BOM item
For the BOM header i have done it, but for the BOM item i got some trouble with the item number (POSNR),
when i run the LSMW, for the first item (item 0010) was success, but for the item 0020, it can't work and i got error
message " NO BATCH INPUT FOR SAPLCSDI 0150"
How is the recording step by step for BOM Item so the Item number can increase well?
Very need your help,
Regards,
Marufat

Hello Santosh,
Thanks for the reply,
I already check in SM35 where i also thought that the main problem is about adding the new item number,
but when i tried to do repeat recording, i can not find any entry for adding the line item, so the line item after 0010 cannot be input
Is there any solution?
Regards,
Marufat

LSMW for material master using Batch input recording method

Dears,
I am using Batch input recording method to upload material master data. But while selecting views , I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry . That is when I run in foreground system selects only basic data and purchasing views but the plant data views are not selected(palnt data views are selected by scrolling while recording).
How to resolve this issue.
Pls help
Regards
Kamesh

HI,
, I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry
Don,t scroll use Page down button from key Bord
like select Basis view and then press page down button from key board ,then you will get next view now select it
Regards
Kailas Ugale

Lsmw (batch input recording)

explain step by step procedure for uplodig master data through lsmw (batch input recording) method. please explain settings for auto field mapping in 5th step

Hi Neela,
These are the steps to be followed while doing a Batch Input Recording.
LSMW STEPS (Batch Input Recording)
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
Create a structure like the Input File
eg:
Name - LIFNR
Description - Account number or Vendor Number
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
You can choose the Auto Filed Mapping under Extras Menu. Yopu can also do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process (Back ground or Display Errors)
Refer the Below Links
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
http://help.sap.com/bp_blv1500/BL_US/documentation/LSMW_EN_US.doc
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward Points if Useful
Regards
Gokul

Difference between batch input method and batch input recording in LSMW?

hi,
plz tell me the difference between batch input method and batch input recording in LSMW?
thanks & regards
Ruban

Hi Ruban,
The main difference between the two is in lsmw we can view the code status at any time just by coming to prvious steps, but whereas in batch input method unless the recording is finished we cant view the code.
second diff is tht we need to do lot of coding in batch inptu whereas here in lsmw we need not do much coding and mapping to data.
third diff is that batch input is both inbound and outbound where as lsmw is only inbound.
hope u got the differences.....
Regards,
sana M...

Error While Doing LSMW For CL20N.

Hi Experts,
Am creating a LSMW For CL20N. While doing tht through the Batch Input Method its throwing a Runtime error message DYNPRO-NOT-FOUND.
If any one know this please help me to sort out this problem..
With Cheers,
Sumodh.P

Hello,
Check recording you have done for CL20N transaction. Look out for screen call sequence.
Looks like the screen call sequence is different while recording & at time you uploading your data.
You can check it while uploading data with run BDC MODE 'A'. displays ALL screen.
In this way you can see where error is coming up with your upload data.
Try to do re-recording of the same transaction with your upload data.
Some-time depending upon your upload data screen sequence gets changed, this may cause the BDC while upload to fail.
Make sure your BDC recording with test data & upload data are matching in business data sense.
Regards,
sameer

Batch input recorder - subscreen missing

Hi all,
I made a batch input recording with transaction VCH2.
But in recording mode the subscreen with the already existing classification values is missing. The subscreen is not shown...
Any ideas?
regards

If these subscreen is part of Modification or enhancement to the transaction.(i.e the subscreen is added later on for some specific requirement).
you just need to add these screen Manually in you code they don't appear in recording.
Even if you add custom fields to the tcode they will behave the same.
The is issue is just will custom fields and subscreens.
Regards,
Gurpreet

SaveAs in Batch Input Recorder

Hi! I'm Cherrie, a newbie. Is it possible to incorporate exporting attached file of an email message to Batch Input Recorder? How?
Trying to save the file to a local pc automatically as batch input recorder process. However, it always stops where export button is to be clicked as before SaveAs dialog shows.
Please help.

Hi,
It's not possible to save file to local pc if you run your program in background.
Krzys

IW31 Batch input recording for lsmw

Hi all,
I am facing difficulty in doing LSMW for IW31 transaction. I have created the flat file with the identifiers. But when i run the session, for 2 items of a single header, two different orders are created with one for each item.
Is it the problem with the flat file or with the recording?
Thanks in advance.
Vijay

A method we've used for KB31N using BDC with some success is to loop at an internal table containing the fields to populate (we use an input file with 8 fields and constants/global variables for the rest). I don't have the code avaialble but here is some pseudo-code:
open a new session for the document
append data to a BDCDATA table (either static/global or dynamic/user-/file-input)
if in list view move cursor to top left (EL2(01)) and insert line; if in individual view simply enter the fields to move to a new record
when at the last record, post the data
close the session
run the transaction with the BDCDATA from the newly created session
Since the order of our data is important in the final document we read the data into an internal table and assign sy-tabix to an ID field. Then we simply sort the internal table by ID descending just prior to the main BDC loop.
Please note that I said we've used this method with some success. I've found that there seems to be a limit to the number of entries but have, as yet, found no documentation on what the limit may be, why there appears to be one, or even if there is a limit in the first place or if I'm seeing the effects of limited resources.
I hope this answer helps. Thanks.
Scott in New York, USA

PO creation using LSMW through batch input method

Hi, I am new to working with LSMW and i have completed a project for creating purchase orders using the direct data input method. I need to do the same using batch input method, however in the maintain structure relationship step, it is only allowing me to assign one structure to the recording that i have done, however in po creation we need separate (nested) structure for header and line item, could anybody help me past this please?

Hi Rudra!
OK, now you just know, why you have only one line, not multiple PO item lines. To get a dynamic number of items, you need a complex program - just like standard direct input.
If you need a field, which is not part of this program, don't try to write your own program for batch input - it's just to much work before you have a good result.
You can use Bapi method instead with BAPI_PO_CREATE1. This can handle a lot of fields and there is some documentation available how to fill the Bapi.
If this looks to complicated in the first moment, think about creation of POs via direct input and a small batch recording to change your additional field(s) afterwards. (You can select EKPO table to generate list of 'wrong' migrated orders for input in LSMW.) Use field 'Item' in the bottom of ME22 to position your desired line in first screen line, just change one PO-line after one other (every time a 'save' -> no problem with different number of lines / PO).
Regards,
Christian

Batch Input / Recording for EnjoySAP transaction

Hi Experts,
May I know any possibility for us to do recording/batch input processing for EnjoySAP transaction ??
Nowadays I need to do Recording for ME29N, as ME28 have some problem on release some of the PO document, so may I know any tool that I might can use?
Thanks
Cheers,
Isaac.

Hi Issac,
Suggest you to<b> Search in SDN with key - eCATT</b>
Will get few more useful related Posts.
Check
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Part I - eCATT An Introduction
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
Part II - eCATT Scripts Creation - TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Part III - eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Part IV - eCATT Chaining, Parameterization, Creation Of Test Data,Test Configuration, System Data /people/sapna.modi/blog/2006/04/18/ecatt-chaining-parameterization-creation-of-test-datatest-configuration-system-data-part-iv
Part V - eCATT Scripts Management Via Test Workbench
/people/sapna.modi/blog/2006/04/13/ecatt-scripts-management-via-test-workbench-part-v
Part VI - eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
Reward points if this Helps.
Manish
Message was edited by:
Manish Kumar

Lsmw for cl20n through batch input recording

Similar Messages

Maybe you are looking for