LSMW for functional location address fields

HI Folks,
I'm loading functional location thru LSMW Direct input method. I coudn't able to see any structure relation for address fileds on functional location. I have mapped the IBIPFLOC for functional location but it doesn't have any address fields. So how to load the address fields of functional location thru LSMW direct input method. Thanks in advance.

Hi Praveen,
You can create a separate LSMW for this or you create a LSMW for FLoc upload along with the address details. I don't think this is possible with the standard program you have chosen.
Regards,
Bala

Similar Messages

Address upload for Functional Locations

Hello,
I'm using batch input session to upload address data for functional locations (PM). However, I do not see any way to enter address data with this method. Do you have any suggestions on this matter?
Thanks in advance,
Eli

yes I mean recording with LSMW.
Standard batch input and BAPI FUNC_LOC_CREATE do not have the adress data.
even for customer and vendor adresses it is not possible to do it in one shot (if you use central adress management) as you can read in OSS note 306275 and 384462

Can't find Business Object for Functional Location BOM in BAPI

Hi all,
I've to make Upload Program through BAPI for Functional Location BOM,for making that Upload i can't find BUSINESS OBJECT for FUNCTIONAL LOCATION ,Equipment BOM and Fleet Object (Vehicle).Kindly tell what Business Object should i used to create that Upload Programme.I shall be very thankful to you.
Regards,
ABAPFK

Hi
you have to do all steps in LSMW
1.Maintain Object Attributes
2.Maintain Source Structures
3 Maintain Source Fields
4 Maintain Structure Relations
5 Maintain Field Mapping and Conversion Rules
7 Specify Files
8 Assign Files
9 Read Data
10 Convert Data
11 Create Batch Input Session
Please maintain source fields required.thats important.(maintain 2 level-header and item,also provide common name of column to link to 2 files
Header file:sample
RECORDNAME     EQUNR     Plant
10001031                        10001031      3000
Item file:sample
RECORDNAME     ITEM NO     MATNR     Item catg   QTY
10001031                             10      P-1001          L               1
Regards
Seenu

Updating and deleting Partner functions for functional location

Hi ,
I am having a requirement of updating and deleting partner function for functional location .
If anyone can suggest some BAPI or function module for same .
Thanks n Regards
Manik

Hi Fritz,
Thank you for your response,
My need is to create a PARTNERS for the FUNCTIONAL LOCATION.
LET ME DESCRIBE IT.
WHEN I AM CREATING A FUNCTION LOCATION USING IL01, AS I ENTER A FUNCTIONAL LOCATION AND PRESS ENTER IN THE NEXT SCREEN.
AND
I NEED TO ENTER THE PARTNERS FROM THE DROP DROWN MENU GOTO ->PARTNERS
WHICH TAKES ME TO THE NEXT SCREEN WHERE I NEED TO FILL THE INFORMATION IN THE TWO FIELDS : FUNCT & PARTNER.
I need a partner for the functional location that i mentioned above.and i need to upload that information in through Emigall.
So my query was that can we customize that partner for this functional location and if yes, what should the constraints,
what are steps required? Do we require a custom service module?
Regards,
Robert.

Functional Location Required field- Notification processing

Hello All,
I would like to maintain Functional Location as a Required field for certain Notification Types. In IMG:
Plant Maintenance and Customer Service>Maintenance and Service Notifications>Notification Creation>Notification Types>Set Field Selection for Notifications
Field Selection for Maintenance Notifications
Field Selection Reference Objects PM Notification
When I Select Field Selection for Maintenance Notifications>Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field the Notification Type does not have Functional Locatiion as a Required Field.
When I select Field Selection Reference Objects PM Notification:ISelect Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* the Notification Type does not have Functional Locatiion as a Required Field.
But When I select Field Selection Reference Objects PM Notification:Make Functional Location as a Required field and then Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* all the Notification Type does have Functional Locatiion as a Required Field.
How do i make the Functional Location as a Required field for a particular Notification type.
Thanks
Krish

1) Field Selection Reference Objects PM Notification
2) Click 'Influencing' button
3) Double-click 'Notification type'
4) Input your notification type on 'Contents' field, then enter
5) Select 'Required' for functional location
Save
Regards
Luke

Addition of sub-screen for Functional Location / Equipment / Notification

Hi All,
Can any one help me on Addition of sub-screen based on config in new tab or sub-screen for objects for Functional Location / Equipment / Notification / Notification Item / Work OrderWork Order Operation.
If you are designed the above requirement by using ABAP objects please send sample code for the same.
I am not bothering about addtional fields which you created in your program.
Thanks a lot.
-Kalluri

Thenna,
QMIH-ILOAN -> ILOA-ILOAN
ILOA-TPLNR -> IFLOT-TPLNR
PeteA
[www.pjas.com]

Problem when Indicator for Alt. labelling for functional location activated

Dear Experts,
In our test system, i had activated alternative labelling for functional lcation for an interface with Locations in ISU.
After i activated it the entire labelling for functional locations got changed to some arbitrary sustem generated number. For a sample -?0100000000000000142. Is there a ways i can retrieve the original names back. We have reactivated it to inactive again.
Please help.
Thanks,
Boby Mathew

Hi,
Once alternative labelling is active, the previous functional location number (IFLOT-TPLNR) and OBJNR become a internal number. The visible location labels are stored in table IFLOS (Field STRNO).
How easy it is to revert to status 1-Inactive depends on the existance of IFLOS records. If there are no IFLOS records it should be possible to just deactivate via OIPU transaction - Uncheck the 'alt label active' flag - Save.
Where IFLOS records exist it means functional locations have already been created while the switch was active. These functional locations must be archived. See the full instructions for this process in note [359186|https://service.sap.com/sap/support/notes/359186]. It's a old note but is still valid for all current releases.
-Paul

Partner for functional location of connecttion object

Hi Fritz,
Thank you for your support,
I would require to have a Migration Object : PARTNER for FUNCTIONAL LOCATION of CONNECTION OBJECT.
i know its a custom development can you help me with this context. To go ahead and develop this.
As i would require this to complete the data migration cycle for one part.
what are the requirement i need to take care to make this customization possible?
Regards,
Robert.

Hi Fritz,
Thank you for your response,
My need is to create a PARTNERS for the FUNCTIONAL LOCATION.
LET ME DESCRIBE IT.
WHEN I AM CREATING A FUNCTION LOCATION USING IL01, AS I ENTER A FUNCTIONAL LOCATION AND PRESS ENTER IN THE NEXT SCREEN.
AND
I NEED TO ENTER THE PARTNERS FROM THE DROP DROWN MENU GOTO ->PARTNERS
WHICH TAKES ME TO THE NEXT SCREEN WHERE I NEED TO FILL THE INFORMATION IN THE TWO FIELDS : FUNCT & PARTNER.
I need a partner for the functional location that i mentioned above.and i need to upload that information in through Emigall.
So my query was that can we customize that partner for this functional location and if yes, what should the constraints,
what are steps required? Do we require a custom service module?
Regards,
Robert.

Alternate labelling for functional locations

Hi PM Experts,
Does anyone know how to go about using "Alternate labelling for functional locations".
We currently use a GIS code for our description of our FLOC's, the problem is that the users cannot see the address of the FLOC.
I dont know if the Alternate labelling for functional locations will work or if there is another option available.
Kind regards

Thanks.
It is maintained in the FLOC. The main reason we need the address is when we print out a work order. It displays the FLOC ID but we need the address to be printed out on the order.
Regards

Change pointer for functional location- deletion flag & activation status

Hello,
Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
I found that those two are stored in:
table     field
TAPL     LOEKZ
TAPL     PARKZ
The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
Thanks in advance.

Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
rgds.

Tables for Functional location/equipment in Sales Area

Hi ,This is sivakumar ...
h2.
I wanna know Tables for Functional Location/equipment in Sales area under the Customer Service erena.

I know the sales order number, header and item ..
I need other parameters to use this table....

Function module like ENQUEUE and DEQUEUE for function location.

Hi All,
I should be highly appreciate if any one help me for locking function module like ENQUEUE and DEQUEUE
for function location.
Thanks
Shaw

Hi,
You can either use the standard way of locking by using :
data:lv_varkey          TYPE rstable-varkey.
concatenate functional_location sy-mandt into lv_varkey .
*   Lock table
    CALL FUNCTION 'ENQUEUE_E_TABLEE'
      EXPORTING
        mode_rstable   = 'E'
        tabname        = 'IFLOS'
        varkey         = lv_varkey
      EXCEPTIONS
        foreign_lock   = 1
        system_failure = 2
        OTHERS         = 3.
*     Unlock table
      CALL FUNCTION 'DEQUEUE_E_TABLEE'
        EXPORTING
          mode_rstable = 'E'
          tabname      = 'IFLOS'
          varkey       = lv_varkey.
Or,
As mentioned above create a lock object via transaction SE11.
Go to transaction se11:
--> Enter lock object name e.g EZ_IFLOS
--> Click on create
--> Enter description
--> Click on tables tab
--> Enter 'IFLOS' as table name
--> select lock mode
--. click on save and activate.
2 function modules will be created as DEQUEUE_EZ_IFLOS and ENQUEUE_EZ_IFLOS .
Regards.

Outbound IDOCs for Functional Location

Hi experts
We are planning to use IDOCs for interfacing SAP and Legacy system using XI.
THis will be an outbound interface as we will be updating the legacy system with SAP.Therefore I am looking for a standard outbound IDOC for functional location.
So far I have not found one. Can you advise the outbound IDOC for Functional location ?
Another question I have , I have found some IDOC's but they are not released , Is there a way to release the IDOC's, what needs to be done for this.
Many Thanks
Regards
Gaurav

Hi Vinod,
This is the case for the 2 outbound Idocs from ECC to SNC for which settings have been maintained to send them immediately:
1. PORDCR1
2. STPOD
I have asked my PI team to check the PI port / PI cache. Will keep the thread updated if theres any resolution.
Regards,
Bharath

To maintain 'Functional Location Description' field as mandatory field

Hi All,
I am unable to maintain the "Functional Location Description" field as mandatory field (Screen Filed: IFLO-PLTXT).
In IMG settings, I am unable to find this field to change it to "required" field. Could you pls. tell me the way to make this field as mandatory.
Thanks in advance.
JK

hi try t.code oiaj there is a filed of description

BAPI for functional location

Hi expert,
I want to upload master data for functional location .
can any body suggest me name of BAPI for the same .???
Regards
Prasad

Prasad,
It would be very useful for you to have a look at TCode BAPI to see what is available
PeteA

LSMW for functional location address fields

Similar Messages

Maybe you are looking for