LSMW for material master upload

Hi gurus
i have one problem while uploading material master with LSMW.
I have murged 2 company codes in one so while creating material master system is asking me tax classification data in sales view for 2 country sales org and distrubition channel. I am using sap std LSMW for material master creation.
system is giving me error as " tax classification data not maintained completely".
need your valuable help to solve this problem

Tax classification data is mandatory field in Sales view of MM01.
Check out you mapping for the tax classification fields. usually classification value is 0 OR 1.
You can first test the values in MM01 Sales View with the legacy data you have and this way you will able to find the mandatory fields also and can see the valid values for the fields.
Remember you may have more than one Tax Classification values depending on the country code.
For that you can add those many columns in legacy data file and map them.
Hope it helps.

Similar Messages

  • LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA -Adding Custom Fields

    Hi Gurus,
    I'm developing LSMW for Material Master Upload using BAPI method.
    Object:BUS1001006
    BAPI:BAPI_MATERIAL_SAVEDATA
    MESSAGE TYPE: MATMAS_BAPI
    BASIC TYPE : MATMAS_BAPI03.
    There is a requirement to use/map a custom field. Upon research custom field can be added to the parameter EXTENSIONIN and EXTENSIONINX, but I have no Idea on how to do it with LSMW. Please advise what approach is needed.
    Thanks and Regards,
    Jay

    Hi Gurus,
    I got the following code below.
    The custom field won't get updated.... Please advise on what should I do... I've checked different forums and still can't come up with the solution... Please advise..
    REPORT ztest_extend_matmas1.
    STRUCTURE
    TABLES:
    bapimathead, "Headerdata
    bapi_mara, "Clientdata
    bapi_marax, "Clientdatax
    bapi_marc, "Plantdata
    bapi_marcx, "Plantdatax
    bapi_makt, "Material description
    bapiparex, "Extensionstruktur
    bapiparexx,
    bapiret2. "Return messages
    DATA:
    bapi_te_mara LIKE bapi_te_mara,
    bapi_te_marax LIKE bapi_te_marax,
    v_file TYPE string.
    INTERNAL TABLE
    *to store the output data
    DATA:BEGIN OF it_material_number OCCURS 0.
            INCLUDE STRUCTURE bapimatinr.
    DATA:END OF it_material_number.
    *for materialtext
    DATA:BEGIN OF it_materialdesc OCCURS 0.
            INCLUDE STRUCTURE bapi_makt .
    DATA:END OF it_materialdesc.
    *für z-feld
    DATA:BEGIN OF it_bapiparex OCCURS 0.
            INCLUDE STRUCTURE bapiparex.
    DATA:END OF it_bapiparex.
    *für z-feldx
    DATA:BEGIN OF it_bapiparexx OCCURS 0.
            INCLUDE STRUCTURE bapiparexx.
    DATA:END OF it_bapiparexx.
    *to return messages
    DATA:BEGIN OF it_return2 OCCURS 0.
            INCLUDE STRUCTURE bapiret2.
    DATA:END OF it_return2.
    DATA:BEGIN OF it_return OCCURS 0.
            INCLUDE STRUCTURE bapiret1.
    DATA:END OF it_return.
    DATA
    lt_messages      TYPE bapiret2_t.
    PROCESSING
    *bapimathead-material = it_material_number-material.
    bapimathead-material = '100-2520'.
    bapimathead-ind_sector = 'P'.
    bapimathead-matl_type = 'AEM'.
    bapimathead-basic_view = 'X'.
    bapimathead-purchase_view = 'X'.
    bapimathead-inp_fld_check = 'I'.
    *bapimathead-BASIC_VIEW = 'X'.
    *bapimathead-SALES_VIEW = 'X'.
    *bapimathead-PURCHASE_VIEW = 'X'.
    *bapimathead-MRP_VIEW = 'X'.
    *bapimathead-FORECAST_VIEW = 'X'.
    *bapimathead-WORK_SCHED_VIEW = 'X'.
    *bapimathead-PRT_VIEW = 'X'.
    *bapimathead-STORAGE_VIEW = 'X'.
    *bapimathead-WAREHOUSE_VIEW = 'X'.
    bapi_mara-matl_group = '0001'.
    bapi_mara-old_mat_no = '100-251'.
    bapi_mara-base_uom = 'ST'.
    bapi_marax-matl_group = 'X'.
    bapi_marax-old_mat_no = 'X'.
    bapi_marax-base_uom = 'X'.
    bapi_marc-plant = '1000'.
    bapi_marcx-plant = '1000'.
    it_materialdesc-langu = 'EN'.
    it_materialdesc-matl_desc = 'DESC'.
    APPEND it_materialdesc.
    *bapi_te_mara-material = it_material_number-material.
    bapimathead-material = '100-2520'.
    *bapi_te_mara-zzforst = '4148'.
    bapi_te_mara-material = '100-2520'.
    bapi_te_mara-zzmar_field1 = '4148'.
    *bapi_te_marax-material = it_material_number-material.
    bapimathead-material = '100-2520'.
    *bapi_te_marax-zzforst = 'X'.
    bapi_te_marax-material  = '100-2520'.
    bapi_te_marax-zzmar_field1 = 'X'.
    it_bapiparex-structure = 'BAPI_TE_MARA'.
    it_bapiparex-valuepart1 = bapi_te_mara.
    APPEND it_bapiparex.
    it_bapiparexx-structure = 'BAPI_TE_MARAX'.
    it_bapiparexx-valuepart1 = bapi_te_marax.
    APPEND it_bapiparexx.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata            = bapimathead
        clientdata          = bapi_mara
        clientdatax         = bapi_marax
        plantdata           = bapi_marc
        plantdatax          = bapi_marcx
      IMPORTING
        return              = it_return2
      TABLES
        materialdescription = it_materialdesc
        extensionin         = it_bapiparex
        extensioninx        = it_bapiparexx
        returnmessages      = lt_messages.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    THanks and Regards,
    Jay
    Edited by: jhayyy on May 17, 2011 6:54 AM

  • LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA

    Hi Gurus,
    Im trying to develop lsmw for material master upload using bapi method.
    Object:BUS1001006
    BAPI:BAPI_MATERIAL_SAVEDATA
    MESSAGE TYPE: MATMAS_BAPI
    BASIC TYPE : MATMAS_BAPI01.
    I m unable to find parameters to load gross_weight volume and volume unit and also problem loading the custom fields of material master. Any body who has worked on this one, can you please help me.
    Thanks
    venkat

    The BAPI_MATERAIL_SAVEDATA support the gross_weight or the volume via the tables UNITSOFMEASURE and UNITSOFMEASUREX.
    eg.
    UNIT_OF_WT =KG
    ALT_UNIT = PCS
    NUMERATOR = 1
    DENOMINATR =1
    GROSS_WT =1000
    All the customer specific field are supported by the EXTENSIONIN and EXTENSIONINX tables.

  • What is the standard program for Material Master upload using LSMW

    Dear All
    I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.

    Hi Amol,
    You can load the material master using direct input method  in LSMW ,details of which are as follows:
    Object               0020   Material master
    Method               0000                 
    Program name         RMDATIND             
    Program type         D   Direct input    
    Please revert back in case of any doubt.
    Cheers
    VJ

  • Issue in LSMW for material master using standard input program RMDATIND!!

    Hello guys,
    I have a issue in LSMW for material master.
    I have a custom field in MARA table. which I want to add in my LSMW.
    I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
    Is there anything else I need to do apart from addition of field in the structure BMMH1.
    Thanks in advance for your help.
    Regards,
    Sumeet....

    see oss note 44410, it gives you a step by step overview.
    https://service.sap.com/sap/support/notes/44410

  • LSMW for Material master data

    Hi,
    Anybody can help me, how to make LSMW for Material master data.
    Thanks in Advance
    Arjun

    pls follow the thread:
    http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm
    regards,
    indranil

  • Help me for material master upload by using Direct Input method

    <b>Hi All,</b>
       Can any one help me out for developing Material Master Upload program  by using <b>Direct Input</b> Method where we are also submitting the report to upload the data in SAP Database.
    <b>
    Thanks in Advance!</b>
    <b>Ramkumar.K</b>

    <b>Hi Kumar,</b>
      Thanks! I am using submit statement in my program as well but its populating all the views like Sales Organization Data, Sales - General / Plant Data, Accounting, and all the other views except the<b> Basic Data View</b>.. Eventhough i have populated the corresponding fields of the same.
    I am also using structure BGR00, BMM00, BMMH1 to upload the data
    Can you please help me on this..
    <b>
    Regards,
    Ramkumar.K</b>

  • Classification view creation via LSMW for Material master

    Hi,
    We are planning to have an LSMW for creation of material master along with classification view for configurable materials.
    Though we see a flag to indicate classification view  - XEIC1                        Indicator: take Classification view into account
    We do not see a structure where in we can pass all the characteristics and the corresponding values.
    Is this something possible only with BAPIs such as -> BAPI_OBJCL_CREATE after creation of other view for that material.
    Regards,
    HR

    Hi,
    Thanks for the response. This is helpful.
    However, we were intending to use a single LSMW for creation of all views of material master including classification view. Right now we are using Program RMDATIND as direct input method in LSMW.
    Please let me know if there is a way to use single LSMW for creation of all views of material master.
    Thanks
    HR
    Edited by: Hema Rao on Jan 8, 2009 7:58 AM

  • LSMW for material master using Batch input recording method

    Dears,
    I am using Batch input recording method to upload material master data. But while selecting views , I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry . That is when I run in foreground system selects only basic data and purchasing views but the plant data views are not selected(palnt data views are selected by scrolling while recording).
    How to resolve this issue.
    Pls help
    Regards
    Kamesh

    HI,
    , I need to scroll to select the vies lets say Plant storage loc view. While scrolling and selecting ,views are not recorded propelry
    Don,t scroll use Page down button from key Bord
    like select Basis view and then press page down button from key board ,then you will get next view now select it
    Regards
    Kailas Ugale

  • Material master upload -lsmw

    Hai guys,
               I want to upload material using lsmw for material master.i am following all the steps in the lsmw. i am using the batch input method for uploading.If the sales unit is different from the unit of measure..i will be getting the conversions data like numerator and denominator fields.
    i am getting the same fields if the issue unit is also different.so i couldnt able to map it correctly with the conversion fields..this repeating fields are not captured in the recording for the target fields.
    so i couldnt able to map it.please help me to solve this problem..
    with regards,
    sathish..

    Hi,
    Please close this duplicate thread..
    Thanks,
    Naren

  • LSMW for Vendor master

    Hi All,
    I am trying to use LSMW for Vendor Master upload.
    I have gone through all the steps and it is showing correct data in "Display Read Data".
    Also the data in "Display Converted Data" is correct.
    However when i am running step "Create Batch Input Session" , it is giving following errors:
    (1) Transaction XK01 is not supported
    (2) editing ws terminated.
    Wt could be possible reason for this,I am using standard Batch method for object 0040 and program name RFBIKR00.
    ("Maintain Object Attributes" details).

    hello,
    in the field mapping step, check whether tcode field has been assigned as XK01 properly.
    Reward Points if it is Useful.
    Thanks,
    Manjunath MS

  • Uploading sales text and Purchase order text for material master

    Hi,
      I have created, material master with LSMW  byt not updated SALES TEXT and Purchase order text with LSMW  now i want to uplaod the sales and po text for material master can you give some link or ref. code to upload the text i have near 1000 items for which i want to uplaod text  when i have done the recording with SHDB  i have not found filed in recording.
    regards,
      zafar

    Hi,
    I have made the code in se38
    as below but still it is not working
    REPORT  ZTEST_TEXT.
      data: headerl like thead occurs 0 with header line.
      data itab3 like tline occurs 0 with header line.
    headerl-tdobject = 'MATERIAL'.
    headerl-tdname = '00000000000LSMW123'.          "(Material : 000000000300000560, Sorg : 0001, Dist channel: 01)
    headerl-tdid  = 'BEST'.
    headerl-tdspras = 'E'.
    append headerl.
    move '*' to itab3-tdformat.
    move 'Testing PO text' to itab3-tdline.
    append itab3.
    call function 'SAVE_TEXT'
      exporting
        header                = headerl
      insert                = ' '
       savemode_direct       = ' '
      tables
        lines                 = itab3
    exceptions
       id                    = 1
       language              = 2
       name                  = 3
       object                = 4
       others                = 5.
       IF SY-SUBRC = 0.
         CALL FUNCTION 'COMMIT_TEXT'
           EXPORTING
                OBJECT   = headerl-tdobject
                NAME     = headerl-tdname.
       ENDIF.
       break-point.
    regards,
    zafar

  • Step by step instruction for Using LSMW Recoding method for Material Master

    Guys,
    Can some one explain step by step procedure for uploading the materials master data to R/3 by using LSMW Recoding method. By the time you reply I will go through the rule of uploading the data..
    Thanks guys,
    Dhanu.

    Hi,
    The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
    The LSM Workbench covers the following steps:
    (1)Read the legacy data from one or several files (e.g. spreadsheet tables, sequential files)
    (2)Convert the data from source format to target format
    (3)Import the data using standard interfaces (Batch Input, Direct Input, BAPI, IDoc).
    The Steps for LSME are:
    Example: Customer Master upload:
    LSMW to Update Customer Master Records with Transaction Recording
    Call Legacy System Migration Workbench by entering transaction code LSMW. Every conversion task is grouped together as Project / Subproject / Object structure. Create a Project called LSMW_DEMO and a Subproject as CUSTOMERS and Object as CUST_REC
    Step 1: Maintain Object attributes
    In this example, you will be updating the customer master records with the help of recording a transaction (XD02). Choose radio button Batch Input Recording and click on the recording overview icon to record the R/3 transaction. Enter the Recording name as XD02_REC, the description as Customer Master Updates Recording, and the transaction code as XD02.
    Step 2. Maintain Source Structures
    Give a name and a description to the source structure
    Step 3. Maintain Source Fields
    In this step, you need to list what fields are present in the source structure. The easiest way is to click on u2018Table Maintenanceu2019 icon to enter Fieldname, Type and Length for each field
    Step 4: Maintain Structure Relations
    Execute a step to u2018Maintain Structure Relationsu2019. Since, there is only one Source and Target Structure, the relationship is defaulted automatically.
    Step 5: Maintain field mapping and conversion rules
    Field RF02D-D0310 represents that you chose u2018Sales viewu2019 for the customer Master screen accordingly its value should be set to X. Keep your cursor on field RF02D-D0310 and click on Constant rule icon to choose the constant value of u2018Xu2019.
    If your source file already has the field value, you choose rule u2018Source Fieldu2019.
    Keep cursor on field u2018KUNNRu2019 and click on u2018Assign Source fieldu2019 icon to choose source field CUSTOMER from structure XD02S
    Step 6: Maintain fixed values, translations, user-defined routines
    You can also maintain re-usable translations and user-defined routines, which can be used across conversion tasks. In this case, that step is not required.
    Step 7: Specify files
    In this step, we define how the layout of the input file is. The input file is a [Tab] delimited with the first row as field names. It is present on my PC (local drive) as C:\XD02.txt.
    Step 8: Assign files
    Execute step u2018Assign Filesu2019 and the system automatically defaults the filename to the source structure.
    Step 9: Read data
    In this step, LSMW reads the data from the source file (from your PCu2019s local drive). You have the option to read only selected rows and convert data values to Internal format.
    Step 10: Display read data
    This step is optional. If required, you can review the field contents for the rows of data read.
    Step 11: Convert data
    This is the step that actually converts the source data (in source format) to a target format. Based on the conversion rules defined, source fields are mapped to target fields.
    Step 12: Display Converted data
    Again this is an optional step to view how the source data is converted to internal SAP format
    Step 13: Create batch input session
    Once the source data is converted in an internal format, you can create a batch session to process updates.
    Step 14: Run Batch Input Session
    You can execute the BDC session by Run Batch input session. Executing a batch input session is a standard SM35 transaction for managing BDC sessions. Once you have successfully executed the batch input session, the customer master records are updated in the system. You can confirm this by viewing the customer master records (XD03).
    Follow the link for material master
    http://www.sap123.com/showthread.php?t=98
    Regards,
    Biju K

  • Material master Upload with LSMW

    Hi
    When I make Material master Upload with LSMW, I could not find any entry in planning file.
    Please explain.

    Mayuresh,
    Not all LSMW transactions properly update Planning file.
    You can run transaction MDAB to set up planning file in Background
    You can run transaction MDRE to detect and correct Planning file inconsistancies in Background.
    It is probably a good idea to run these jobs periodically, say, weekly, in most production environments.
    Regards,
    DB49

  • Material Master upload - LSMW direct input method - Internal Number problem

    Dear friends,
    I am uploading material masters with LSMW - Direct Input Method.
    The materials have internal numbers.
    I have four plants and I want to extend the same material in all plants.
    But LSMW is creating a new material for each row.
    Is there any way out or any indication I put in file to repeat the internal numbers created for all other plants?
    I can create another LSMW for material extension. But I want to know whether the problem can be solved in the current LSMW?
    Regards,
    Avinash

    http://www.sap123.com/a/98/
    Check the internal number range once.... before extending mateial...

Maybe you are looking for