LSMW for Quality Inspection Plan

Dear All,
I am in process of uploading Quality Inspection Plans through process of LSMW with standard object 0240 (Inspection Plans) with batch input method. With this when I am trying to create Batch Input Session, system is throwing me error as 'Characteristics is not yet created' (Message Number - QS 320). I have maintained all the relevant master data before going to upload Q Inspection Plan.
Could any one pl. throw light on this issue?
Regards,
Prashant

Depending on what control indicator key for master inspection characteristics have you implemented in the operations within the plan, the system checks if the characteristics are completely maintained.
This has nothing to do with LSMW, it's just a normal message,.....what I find estrange is that the message you're saying is a warning message not an ERROR message.

Similar Messages

  • Purchase ledger invoices that are blocked for quality inspection.

    Purchase ledger invoices that are blocked for quality inspection.When invoices are keyed against a stock item that is required to be checked for quality the invoice automatically blocks. Once the check has been carried out and the batch has been released the invoice should automatically release for payment according to terms, however this is not happening.I checked MSC3N,where batch is in unrestricted and status released.Still in material document shows batch in QI.
    Can any one what is the problem.

    Hi
    check in MMBE where the material is lying under the batch .Is it under QI or Unrestricted.
    from QI07 you can put it into Unrestricted or take the UD of lot if generated.
    please revert back
    Regards
    Sujit

  • Error - Invoice is blocked for quality inspection.

    While making payment to vendor the error shown - Error - Invoice is blocked for quality inspection.
    Can anybody help ?

    This is caused by customizing of QM in procurement.
    You can only pay if the material is released from quality status.

  • Unrestricted stock with Migo for quality-inspect materials

    Dear MM Gurus,
    We have a case, for some vendors(between cross company sales) we want to have the materials posted to the unrestricted stock.
    We have changes the stock type form quality inspect stock to unrestricted stock during purchase order creation with MM badi purchase_custom.Now it's ok and when go to migo, it seems also unrestricted stock.After saving the migo screen, checked the material document, it seems again quality inspect stock.
    What happens seems that, the system before saving checks the material master and sees the quality inspect type there selected.
    What we need here is to deactivate this during migo also.Could you please suggest us a userexit-badi to deactivate the quality data of the material so that the stock type is unrestricted.
    Thanx in advance
    Best regards
    Jack Black

    Hi,
    I suggest as per the scenario as if want to go for particular vendors with material combination for quality inspection and for other vendors with material combination for stock type unrestricted.
    I suggest not to go for any user exits.
    You have two options
    1. While creating purchase you can change the stock type in item detail in delivery tab pag e by selecting the desired stocktype for the vendor material combination. For this you need to uncheck the tick mark for quality inspecion for the material in the materila master record.
    2. You can tick the material subject to quality inspection in materila master as it is which willbe defaulted and appear as read only while craeting purchase order for all your vendors. After doing the goods reciept you can tranfer the stock from quality inspection to unrestricted with movement type 343.
    Regards,
    Tushar Patankar

  • Automatic batch determination for quality inspection stock

    Hello, gurus.
    Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check ‘CH’ and Checking Rule for Availability Check ‘03’ where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
    Why it is not possible to do automatic batch determination for quality inspection stock then?

    OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

  • How many TO need to create for Quality inspection material

    Dear all,
    When we do GR's ,TR is created & material is goes for quality inspection .
    So after UD, PCN is created so for this PCN we need to Create & Confirm TO.
    So my question is what we do for open TR which was created after GR posting.
    DO we have to create TO for this TR.
    I mean how TO get's created in this process?
    Please help me out.
    Regards,
    Rock

    what do you do physically?
    a) do you keep the stock in goods receipt area until it is released from the Q status
    b) or do you putaway that stock into its destination bins before it is released from Q-status
    in both cases you use the TR that was automatically created during goods receipt to create the TO.
    in case a) you just execute LU04 to process the posting change notice to change the stock status from Q to unrestricted  prior to creation of the TO.
    in case b) you create the TO directly and process the PCN in LU04 later when the usage decision was made.
    part B can create some difficulties (especially if you setup automatic processing) as you may get several quants because the material need more than one destination bin, while you just have 1 quant in the GR area 902.  So SAP may not be able to determine the quant that needs to be released from Q status by itself, and user has to select those quants manually.

  • Error in LSMW in Uploading Inspection Plan in QP01

    Hi All,
    I am facing problem when executing LSMW, I am Uploading Inspection Plan in QP01 transaction using Direct Input methos. The problem is on 13th step :Error that I get is 'No profile with entry tool for task list / / / in session INSPECTION_OBJ', here INSPECTION_OBJ is the name of the session. I have given the constant value of field profile (BIPKO-PROFIDNETZ) in mapping step and also activated check box 'entry tool' under profile to remove this error. But in  that case i can pass only the header data while processing the session and control does not get into Operation and characteristic screen.
    Can anyone pls help me..
    Thanks in advance...

    You might need to redo the recording all over again, BDC has plentty of scenario for screen selection to go wrong, so can't really tell what cause your problem based on your desc.  I have been stop using BDC to uplaod material since 5 years ago, I always use Direct input in LSMW and it works much better. I recomend you try the Direct input method instead of BDC if still getting problem.

  • Lsmw for qp01 (inspection charactoristics).

    Hello ,
    I am trying to do lsmw for qp01 transaction (inspection charactoristics.)
    I am using Recording method to upload the data.
    I have started recording and filled
    first screen i.e header :
    MATNR C(018) Material
    WERKS C(004) plant
    STTAG DDMY(008) Key Date.
    then i have clicked enter next screen comes. which is inspection plan create tast list overview.
    here i have selected a first line and clicked 'operations' pushbutton.
    next screen operations overview opened.
    following 2 fields are for selecting line and clicking the pushbutton.
    ENTRY_ACT C(011) Entry
    FLG_SEL_01 C(001) FLG_SEL_01
    Then i have selected first line and clicked 'inspection charactoristics' pushbutton.
    next screen charactoristics overview screen is opened.
    Inspection charactoristic screen :
    VERWMERKM_03 C(008) VERWMERKM_03
    VERWMERKM C(008) VERWMERKM
    QPMK_WERKS C(004) QPMK_WERKS
    PMETHODE C(008) PMETHODE
    QMTB_WERKS C(004) QMTB_WERKS
    KURZTEXT C(040) Description
    SOLLWERT C(016) SOLLWERT
    TOLERANZOB C(016) TOLERANZOB
    My data is in .txt file.
    When i run the lsmw , when i process this session , then in inspection charactoristic screen it uploads values of master inspection charactoristics from datafile and takes automaticaly short text insp. charactoristics but system show a window to enter the Target value for quantitative charactoristics Upper specification limit and lower specification limit values for mic's .
    But i have already given these values in my .txt file.
    It is not taken from my .txt file. Again asking me to enter the values.
    Please tell me solution for this problem.

    Hi,
    For each Quantitative Char enter the quantitative data in QS23 .Then you do the LSMW recording.
    This is because you might selected control Indicators Lower and Upper specific limit.
    Regrds
    Praveen

  • How value with few decimals will be enabled for quality inspection records?

    Hi ,
    my client requirement is in such a way that i need to record the quality parameter( quantitative results) like 3.12 in qa32 transaction. how do i enable the respective MIC settings for the same, kindly suggest me
    regards
    archu

    In QS23 transaction --> Select Button Quant.data  -->Maintain Decimal places.
    All new inspection lots will allow you to maintain decimal places.
    If Inspection lot is already Released, Go to QA02 and reset the sample, Re-assign the inspection plan.

  • Block Vendor invoice for quality inspection stock

    hi,
    I have done MIGO & manually change stock type from unrestricted to quality inspection & posted the document. Now i want vendor invoice should automatically block when doing the MIRO, but it is not happening. How to do this?
    Thank's & Regard's
    Parag lute

    Dear Parag,
    Now that you have manually changed the stock type unrestristed to Quality inspection, the option you can use is go to stock overview Tcode:MMBE and psot the stock from quality to block stock. This is completely mannual process.
    If you prefer system to do it automatically, then activate quality inspection setup in MM02, quality view -> inspection setup (inspection type - 01, 04, 08) and also maintain Qinfo Tcode: Qi01 for the assigned material.
    Regards,
    Prashanth Pai
    "Award, if usefull"

  • Movement Type 321/322 for Quality Inspection in warehouse

    Hi Experts,
    I have stock of 950 To in Leanwarehouse in plant. I wanted to move 50 TO material or Quality Inspection to same leanwarehouse 0001 by movement type 321 but it throw error
    Deficit of SL Stck.in qual.insp 11 TO : 1727 4040 0001
    In MMBE I saw the stock for the same material. Why there is an error? It is also not blocked.
    While I tried with movement type 322 it got accepted.
    Can anyone explaing the reasons for this I shall appreciate.
    Thanks for your time.

    Hi, it's better to ask on logistic forum.
    Did you see in MMBE  required value of material at Quality Inspection on entered storage location?

  • LSMW Direct Input Inspection Plan Not Writing Inspection Char File

    Hello Experts,
       I am using Direct Input Program RCPTRA01 to Load Inspection Plan.
    Created 3 structures - Inpection Plan/Operations/Inspection Characteristics one below the other in that order.
    We have a internal numbering system for assigning Group to Inspection Plan.
    I defined GROUPID column in Maintain Source Fields Inspection Plan/Operations/Inspections characteristics structures and set "Identifying Field Content" as 1.
    When i read data - program is reading inspection plan and operations. But it is not writing Inspection Plan file.
    What am i missing. Spent quite a bit of time trying to figure out what i am missing.
    Any help is appreciated.
    Thanks in advance
    Thanks

    Hi,
    I have exactly followed the same thread.
    1. I have actually maintained 3 files, but when reading it takes only the header file.
    2. When Creating input session I an getting a error,
    No profile with entry tool for task list /  3 in session INSPLAN
    Regards
    Subbu.

  • Single inspection plan for all Inspection Plan usages

    Hi
    I have to prepare a single inspection plan, than can be used against inspection type '04' and '15' and '01'.
    Please tell me which inspection plan usage I should use, I tried '3' = Universal, but at inspection lot creation the system is unable to find inspection plan.
    Thanks in advance.

    My customer manufactures semi-finished good, some times he can purchase semi-finished from the market. Sample are reserved for future testing as well.
    so following inspection types are required for the same material
    1) GR against PO                '01'
    2) GR against Production    '04'
    3) Sample Management   '15'
    Almost all the time, the same specifications are tested and my customer wants to maintain a single inspection plan.
    I have one option that is to create 3 inspection types using all the above  inspection types and to use the same "Usage" say '5' in customizing of Inspection Type. But I don't know the consequences
    Please give me other solution or highlight the consequences of my solution
    Kindly help.
    Edited by: Chris SAP on May 13, 2010 11:36 AM

  • Specifying storage bin for quality inspection.

    Hello all,
    I am wanting to move a material, that is stored in multiple storage bins in our warehouse, into an inspection lot.
    I can create a 322 movement in MIGO however this doesn't specify storage bin location, it looks at the warehouse as a whole.
    So can you please help me to specify the storage bin that I am wanting to create a manual inspection lot on.
    Regards,
    Chris

    you cannot do quality inspections of bins, you can only do quality inspection of material stock .
    the quality inspection in QM module is carried out at inventory managment level.
    an inspection lot is created with QA01.
    This moves the stock into quality inspection.
    Along with the MM posting, a WM posting change notice (PCN) is created to move quantity from unrestricted use to Q-status in WM too. you then process this PCN with LU04 transaction. Here you allocate the quants that are effected.
    when the inspection is done, then a usage decision is made with QA11 transaction, which creates again a PCN in WM.

  • FM for Quality Inspection Results Recording.

    Hello!
    I was wondering if someone can help me out on this one:
    The requirement calls for entering the same set of results for several inspection lots.  Short of using batch input, is there a function module that can enter the results of an inspection lot?
    Thanks in advance.  Points for anyone who can give helpful answers...

    Hi Vidhya,
                     Can you please elucidate the isuue a bit more in detail........ in which tab during result recording you are trying to attach file......So I can help with what ever little I know in SAP...........
    Regards
    Kaushik

Maybe you are looking for