LSMW for Routing and Reference Operations

Hello Experts,
I am working on data transfer for Routing and Reference Operations (TCode CA01 and CA11).
I found one LSMW for Routing provided by SAP but didnt found for Reference Operations. Does anyone has more stuff related to Data transfer for Routing and Reference Operation.
Please share with me. My email id is [email protected]
Thanks in Advance..
Harkamal

Hi Harkamal,
Check the programs:
RCPTRA01
RCPTRA02
Go to SE38 .
GIve the name of the program.
Choose the Documentation radio-button.
Click Display.
It is pretty well documented.
Regards,
Ravi Kanth Talagana

Similar Messages

Routing number of operations and reference operation in the order

Hi experts,
If anyone knows about Routing number of operations and reference operation in Maintenance order , please explain.
is it used for maintenance order? if yes, please mention the path from which I can see or note the number generated by the system as Routing number of operations or operation task list no. or reference operation
Regards,

Hello,
Routing number of operations in the order"(field-->AUFPL) of the order at table AFKO, using order number. Find the Operation counter number of the operation at table AFVC using "Routing number of operations in the order".
From above we can fetch the Operation Level data of Order by using the Routing number of operations in the order"(field>AUFPL) .Routing number of operations in the order>which solely identity of the Operation for your order after creation of order it is created this number.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 23, 2010 2:47 PM

Lsmw for routing

I am trying to upload routing using LSMW.
which is the best way to use batch input or direct input. I dont have a choice fof using badis or BDC
can we upload routing without writing any code in LSMW.
so i created three files
header
operation
component allocation.
what should be the link between these three files.I did lsmw for BOM. there i ve used material number as link. bou i didnt find material number in routing lsmw. so what should be the reference.
can we take group counter number as reference.
can some one provide me the source file structures for this LSMW for routing.
thanks.

Hi,
You can use the standard LSMW for routing. As you mentioned first you upload the header and take the group no. as reference and upload the operation. and the components will be automatically assigned to the routing with the first operation.
Thanks and Regards,
Satish

LSMW for routing with standard batch input

Hello All,
I am trying to prepare one LSMW for routing upload for PP module. Routing data contains header data, operation data and master inspection characteristics data.
I have created three source structures viz. material- task list header, task header data, operation and inspection.
Header has been assigned to target structure BIMPL- Batch Input Structure for Allocation of Mat. to Task Lists,
Task header data source structure has been assigned to BIPKO- Batch Input Structure for Task List Header,
Operation source structure has been assigned to target structure BIPPO- Batch input structure for task list operation,
and inspection source structure has been assigned to BIPMK- Inspection characteristics for batch input of task lists.
Every source structure has been identified with an identifier value of which have been set as H, I,J,K for all source structures resp.
The excel file has been prepared as follows,
H     MATNR     WERKS     PLNNR     PLNAL
H     100045     1000     50000043     1
H     100045     1000     50000043     2
I     MATNR     WERKS     PLNNR     PLNAL     VALID_FROM     USAGE     STATUS
I     100045     1000     50000043     1     01012000     1                1
I     100045    1000     50000043     2     01012000     1                 1
I have mentioned here the combination of first two structures only. But it contains data of other two source structures as well (for identifier J & K).
The data from the excel is copied to the flat file and same is specified in LSMW in the step 'Specify file'.
In 'Assign file' step the flat file is assigned to all the four source structure.
Now at the time of reading data system is throwing me an error as 'Ensure field sequence is correct for data for mutiple source structures' Message no. /SAPDMC/LSMW_OBJ_060026
How to overcome this?
<removed by moderator> answers will be greatly appreciated........
Mimiri
Edited by: Thomas Zloch on Jul 11, 2011 10:16 AM

Hello ,
have you maintained this check box for the key fields"
LSMW>Maintain Source fields>double click on fieds : MATNR WERKS PLNNR PLNAL
Selection Parameter for "Import/Convert Data"-->Tick this check box
regards

Creating an LSMW for routing

Hi
I have managed to create a LSMW model, that wil create (CA01) a routing.
My problem is that components (from the BOM) is not assigned to operations.
When I display converted data, just before I create a batch input session, I can can see selected components is assigned to an operation.
When I use transaction CA03 afterwards, behind the TAB " CompAlloc" there is no materials that has been assigned to operations.
Has anyone any experience on this issue?

Dear,
As said by Bala,get the help from ABAP programmer and go for a BDC for
creation of routing.
I have not worked or used LSMW for routing,so could not give a reply for your
question.
Regards
Mangal

Differences between rate routing and reference rate routings?

Hello PP members:
I would like to differences between rate routing and reference rate routings
Thanks for your time,
Thanks Again,
Suren R

Hi Mr.Suren,
As explained by other friends Routing is used in Discrete manufacturing and Rate routing is used for REM-Repetitive manufacturing.
In addional to these types SAP has given 2 more types
1.Reference operation set -Used in Discrete manufacturing.
2.Reference rate routing - Used in REM.
If similar rate routing is been used for producing many materials,then instead of entering(these steps) in rate routing of each material you create a refrence rate routing and you enter the work centres used and the other details.After saving you get a group counter number showing reference rate routing is saved with group XXXXXXXXX.
When you are creating rate routing for a material say A ,after giving the name and plant details in the top you will be able to see an icon "copy from" and you can select the radio button for reference rate routing and give the group counter number. or else without giving it here you have got an option to select the reference rate routing after entering into the operation screen also.
In that particular page in operation overview screen,there will be an icon copy,there you can click that icon and you can give the reference rate routing group counter number and very easily you can create rate routing for N number of material.
Likewise you can use reference operation set while creating routing for a material in Discrete manufacturing.This basically reduces the time in creating routing or rate routing for materials in Discrete & REM respectively
CA01,CA02,CA03-Create,Change,display (routing) respectively.
CA11,CA12,CA13-Create,Change,Display reference operation set Respectively.
CA21,CA22,CA23-Create,Change,Display rate routing respectively.
CA31,CA32,CA33-create,change,display reference rate routing resp.
I hope this will help you.
If useful reward your points.
Thanks & regards
Karthik.

Problem in LSMW for Routing. Urgent

Hello all,
I am doing LSMW for Routing. The object attributes are
Object 0170 Routing
Method 0001 Batch inpu
Program name RCPTRA01
Program type B Batch input
The material number MATNR and the plant WERKS is not getting filled up in the initial screen (CA01 tcode). The fields are RC27M-MATNR and RC27M-WERKS. But all other fields are getting filled up.
I have given the structure relation to BI001, BIMPL, BIPKO, BIPFL, BIPPO.
When I checked the program RCPTRA01, I could able to find out the below code which actually passes space to the above fields.
Material
BDC_TAB-FNAM = 'RC27M-MATNR'.
BDC_TAB-FVAL = SPACE.
APPEND BDC_TAB.
CLEAR BDC_TAB.
Werk
BDC_TAB-FNAM = 'RC27M-WERKS'.
BDC_TAB-FVAL = SPACE.
APPEND BDC_TAB.
CLEAR BDC_TAB.
How to go about this.
Awaiting your reply,
Thanks in advance,
Balaji

Hi,
Im trying to load long text for Operations using the program RCPTRA01 however the screen sequence dosn't even enter the long text area, is there is anything specific that i would have to do to make sure the long text gets in

BAPI for Routing and recipe??

Hi Gurus,
Kindly let me know the standard BAPI's available for routing and recipe.??
Thanks in advance.
Regards
Naveen.

Dear
BAPI for routing :
1.BAPI_ROUTING_CREATE :
Refer all the BAPIs for farther information in our expert posting : Re: BAPI_ROUTING_CREATE
BAPI for master recipe:
1.MRTRS300_MASTER_RECIPE_SAVE
2.BAPI BAPI_QPMK_SAVEREPLICA
3.BADI CPS_EXECUTION_D or BOM_UPDATE
4.CP_DIG_SIGNATURE or CUSLNTRTO_ADDIN
Regards
JH

Error in LSMW for routing,.

i am getting ths error whiled assigning materials to operations, for Routing PP.
You cannot edit the task list object with activity type.
i am using direct input to upload routing material assignment to operation and this is my structure.
my source structure
GRP
GRPCT
OPERAT
ALTNATIVEBOM
HEAMEA
PLANT
MATER

Hi,
Check in log details why it is not updated and also you can run session foreground errors only.
Regards
Md.MahaboobKhan

Lsmw for BOM and Routig

Hi. I am new to this lsmw stuff. i have to upload my boms and routings.i am thinking of doing lsmw for that.can u please guide me . how to do that, which is the best way to do that. can i use recording for uploading the bill of materials and routing.
can some one send me a template for uploading boms and routings.

Dear,
Please refer this link,
[LSMW|lsmw for bom component]
Regards,
R.Brahmankar

Trying to create a password for router and wireless adapte

I was reading through alot of posts and just couldnt find an answer that worked.
I have a linksys wireless router, never had a pass set up on it, and lately
I find someone is connecting to my internet and I would like to put a password
on it. I found these instructions... but it wouldnt accept admin as the password
to allow me to create a new one. I followed these instructions.
"The default password of the router is admin. If you have set up a password before, it will not recognize the default admin.Hold the reset button of the router for 10secs and it will retrieve the default admin...To change the default password, lauch internet explorer(pc should be connected to the router hardwired), type on the address bar, 192.168.1.1--it willl prompt for a username and password, leave username blank and password will be admin...It willl bring you to the set up page of the router..click on the administration tab and from there you can create your new password for your router... To encrypt the wireless network refer to our website, www.linksys.com/kb and search for answer id 759...it will walk you through with the process..."
I am using windows XP for OS and the Wireless G? The router is on my main PC
and the adapter is on my other PC. How do I go about obtaining a password on this? The Model # for the wireless piece is WMP54G not sure what it is on the actual router.
Message Edited by FullSmile on 09-17-2006 11:11 PM

If the router is not accepting the default admin password even after a reset of 10 sec you can hold down the reset button for 30 sec and if that doesn't work even,the other options would be to change browser settings,try a different comp, try upgrading the firmware of the router through tftp.exe.You can download the tftp.exe file from ftp.linksys.com/pub/network.

Does sccm 2012 supports ibcm for linux and unix operating systems

folks,
does SCCM 2012 supports linux and unix operating system for IBCM ..........as per my knowledge it dont what i have learn t through bing........

I thought it's not supported for Linux and Unix, see also:
http://blogs.msdn.com/b/teju_shyamsundar/archive/2014/05/23/installing-the-system-center-2012-r2-configuration-manager-client-on-linux-part-2.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Power consumption for router and switch

I have a linksys EZSX88W switch which I checked power consumption of 70ma idle. It's supplied by the adapter which has an output of 1000ma. Not sure what the consumption when switch is being used. I also have an WRT54GS but haven't checked consumption yet, but it's powered by the same 1000ma adapter. In an effort to save energy-that -GREEN FEELING- I was thinking of using on power adapter to power bothe the router and switch. Has anyone tried this yet?? Also if I posted this in the wrong area I hope the moderator will move the post.
thanks

So you are thinking of Powering on both the Devices using a single Power Adapter? Well never tried to make both the devices use a single power adapter. As far as i think its not possible. But if you still wish, you can give a try and check if that works for you or not.

Syslog for router and switch

Hi all,
Any one help me to configure router and switch log on windows server. I dont have any idea please send me link or guide to configure syslog server on windows. For PPTP vpn users also.

Hi,
Are you asking, "How do I set up my Windows server as a Syslog Server"... in order to receive messages from your routers and switches?
If so, I'd suggest a google search on syslog server - locate and download the software there, and it should have a configuration guide with it.
Was this the information you were looking for?
Curtis

Different results for table and dimension operator

hi
I am new to Oracle and specially Data Warehousing.
I created a mapping with a target operator Dimension, it does not give the desired result. Then I changed the target operator to a table, which gives the expected result. All others are the same like the join condition etc.
I think there is some problem with the dimension, please, help me finding the problem of the dimension.
Details of the dimension: there are two levels in the dimension. the surrogate key for both the levels is the same (ID) but business keys are different. The business key of the level 1 appears in level 2 and is properly mapped to the same attribute. the surrogate key of both the levels in not mapped to any attributes.
regards
Arif
P.S: I tried to include a screen dump of the mapping here, but not possible.

I used @section and <?fo:page-number?> of <?fo:page-number-citation:xdofo:lastpage-joinseq?> but I still get wrong numbering by group
Group1:- 1 of 6
Group1:- 2 of 6
Group2:- 1 of 6
Group3:- 1 of 6
Group4:- 1 of 6
Group4:- 2 of 6
the syntax <?fo:page-number-citation:xdofo:lastpage-joinseq?> is getting total document pages instead of group pages. Desired output is
Group1:- 1 of 2
Group1:- 2 of 2
Group2:- 1 of 1
Group3:- 1 of 1
Group4:- 1 of 2
Group4:- 2 of 2
Below is my syntax
In Header section <?for-each@section:G_VENDOR?>
<?fo:page-number?> of <?fo:page-number-citation:{generate-id()}?>
In Body
<?start:body?>
<?end body?>
<?split-by-page-break:?>
<?end for-each?><fo:block id="{generate-id()}"/> --this is in form field
Please help.
Thanks,
Venkat

LSMW for Routing and Reference Operations

Similar Messages

Maybe you are looking for