LSMW , how the same is related to data migration,.

HI Experts,
please explain the concept of data migration.
What is LSMW/ how the same is related to migration,
what are the other types of data migrationo other than IDOC & BDOC in sap crm.
IS there any there other tools that helps in data migration,
if so , what are they.
Can a functional guy be able to do the data migration in LSMW.
thanks & regards
Prajith P

Hi Prajith,
I second Venkat, but also you need to know about Data Transfer Workbench in CRM.
Go into the IMG and follow the path: Customer Relationship Management>> CRM
Middleware and Related Components>> Exchanging Data With External
Components>> XIF Adapter Setup>> Inbound Direction>> Settings for the Data
Transfer Workbench and LSMW>> SAP Data Transfer Workbench.
Here's the help from SAP for the Data Transfer Workbench:
http://help.sap.com/saphelp_nw70/helpdata/EN/0d/e211c5543e11d1895d0000e829fbbd/frameset.htm
That should take you where you need to go. Good luck!
Satish

Similar Messages

  • Can two java program write to the same port by fetching data from different

    can two java program write to the same port by fetching data from different ports, if yes is thing possible for a 3rd program to get all data (is there any data loss or collision)
    how is this possible

    can two java program write to the same port by fetching data from different portsTwo java clients can connect to the same server port and they can both write to it. However the server will see the connections as two separate accepted sockets.

  • Can Bootcamp and Parallels share the same Windows applications and data?

    I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah!
    I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallels share the same Windows applications and data?
    My thought would be to allow my wife to access Quicken from Parallels and not have to reboot. She will only need lightweight access and the overhead of running virtualization wouldn't impact her. I, on the other hand, would want to occasionally boot natively into Windows and run the same application with the same datafile. Is this possible?
    Thanks and looking forward to joining the MacIntel world!

    Thanks for all of the freplies. I suspected that BootCamp and Parallels could not shar ethe same partition, but wanted to verify. To address some of the other posts:
    Re: Quicken vs MoneyDance - I looked at MoneyDance a while back and while it is comparable to Quicken for Mac, it isn't comparable to Quicken for Windows (ergo, Quicken for Mac isn't comparable to Quicken for Windows!). But, as I said, that is a topic for another thread!
    Re: Using Bootcamp/Parallels for only one app: I actually have several apps that I still need access to on Windows. I work with many business applications than only run/are supported on Windows as well as receive some complex Office documents which Office for Mac cannot handle. Quicken (for Windows 2007) was just the best example of a consumer app where I could see wanting access from both OS X and Windows.

  • After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine:Are you sure you want to back up to the same device your original data is on? the WD disk has mounted??

    After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?"  I've reformatted in Disk Utilities...not sure what I did wrong.  Any help would be appreciated.

    Not sure what you mean by "booted" from it.
    If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
    Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again.

  • Is there any way I can program "Capture" to save pnp.picts always under the same name, without a date ?

    Is there any way I can program "Capture" to save pnp.picts on the desk, but always under the same name, without a date ?
    It may be sound weird, but I use it in a very special way, and I would like, like photoshop, that capture just replace
    the previous pict by the new one..without any warning.
    Pierre

    There is no way to go back from an XFA form to an Acroform even with Acrobat Pro, still less with Acrobat. You either need to remake the form, or change your plans to use a third party viewer - Adobe have an excellent range of programs they would like you to use!

  • I have a 2nd iPhone, the same problem of missing Data in Notes Apps again. Please advise.

    I have a 2nd iPhone, the same problem of missing Data in Notes Apps again. Please advise.

    Did you purchase the music through the iTunes Store?
    The apps you have purchased can be downloaded for free from the App Store.
    http://support.apple.com/kb/HT2519

  • How manage two numbers files in the same screen to compare data

    Hello,
    I have two - 2 numbers files that I want to compare data between them in the same screen, How can I do that? Like in Excel you can compare two differente files in the same screen with the option windows cascade or something like that.
    Please Help Me.....

    First, turn off the abomination that is called "Full Screen" -- ported from the iPhone, land of tiny screens and single tasks.
    Then resize the first window to take up half the screen and place it on the left. Open the second spreadsheet and resize its window and place it on the right.
    Compare.

  • How to use the same variable value for data entry and the planning sequence

    Hi,
    the scenario is the following:
    Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
    Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
    What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

    You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
    Ravi Thothadri

  • Reload the same viewController with different data?

    Hi -
    I have a view which can have either a list of, say, fruit, or fruit vendors. If it a list of vendors, clicking a vendor loads a view where it lists the fruit they sell. If it's a list of fruit, clicking a fruit loads a view where it lists all the vendors of that fruit.
    The same view controller controls that page no matter which set of data is displayed.
    What I'd like to do is animate the transition when that click takes place just like I was going to a different view controller.
    I tried this:
    [[self navigationController] pushViewController:self animated:YES];
    But it's not doing anything - at all.
    Is there a way to do this short of rewriting it to have two separate view controllers for the two sets of data?
    (Sorry, posted this in the wrong forum and I don't see a way to delete it here...)
    Message was edited by: Sue Boettcher1

    Well, I spoke too soon.
    I can get the page to load and it animates right, but I think I haven't got it hooked up right in the nib "referencing outlet" stuff correctly.
    I can't get my head around it - I have to create a new instance of the view INSIDE a method for the view itself. I can see where the other (original) instance of the view is hooked up in the nib but I can't figure out how to hook up the new second instance.
    I'm probably not explaining this very well but I can't post a screenshot...

  • 2 files running at the same time for adquiring data from different ways

    I want to adquire from a serial port( using VISA) and from a DAQ at the same time. I want data form both devices at the same time.
    My program is a while loop reading continuously from both devices until I stop the while loop with a control.  
    I have noticed that I don't receive right data when I read from both devices in the same program.
    So, I have tried to run 2 different programs, one for Visa adquisition and another for DAQ adquisition, at the same time. At this way i receive data ok.
    So, i want to know how can i do execute 2 different .vi files at the same time and how can i get data from the another one.
    Please, help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. I don't know what to do!
    Luz 

    Luz,
    you can insert two seperate while loops in parallel into one VI. Please
    take a look into the template browser and the example finder of LV for
    some examples. You can find the template browser by selecting "new"
    (not new vi!) in the file-menu. The example finder is located in the
    help-menu.
    hope this helps,
    Norbert B.
    NI Germany
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to find tables related to data sources

    Hi...
    Can anybody tell me how to fine Database tables related to Data source.
    Ex: I have a data source 0fi_ap_3. How can i fine From   which tables it is extracting the data.
    Thanks & Regards
    Pankaj Angra

    Hi Pankaj,
       This has already been discussed in the following forum links,.. they will be helpful...
    Re: Find R/3 tables which are in the datasource
    Tables associated with DataSource!
    Find R/3 tables which are in the datasource
    Hope this helps...
    Thanks,
    Raj

  • How to decide target related to data source

    Hi Friends,
                    How can i decide data target(ODS/CUBE) related to Data Source.

    Hi Vishali,
    It depends on the type of data load and volume of data.
    If it is full upload with small volume of data, you can directly load cube.
    if it is full upload with large volume of data, then you can load a DSO and then load delta to the cube.
    If you have delta load which supplies only the after image, then you have to load that into DSO before loading delta to the cube.
    If your delta load supplies before and after image then you may or may not keep a DSO in between.
    What is your scenario?
    Thanks,
    Krishnan

  • Copying contents between hard drives with the same folder names erases data

    I have Final Cut Pro assets stored in two hard drives. I was attempting to consolidate them into a single directory on one of the two hard drives. I did this by dragging and dropping the contents of one folder into the equivalent folder on the destination hard drive, meaning that several folder names were shared between the two directories.
    In Windows, the only contents that would be overwritten are files and folders who share the exact same relative name during the copy procedure. However, OS X appears to have erased the entire contents of the destination folder in favor of the contents of the source folder.
    Time Machine is not enabled: Not enough hard drive space to store everything twice.
    Is this by design? Am I missing something? Is my data recoverable by means that would not cost me several hundreds of dollars? On a scale of 1 to screwed, am I screwed?
    Message was edited by: NuclearBastard

    Seems like you did not select the content but the folder itself. Let's say you're copying from folder A to B. To only overwrite stuff in folder B with the same name while keeping other files & folders, you need to go inside folder A and select the content. If you do select folder A itself, it will completely replace folder B. This is normal behaviour and I'm sure it's the same with other operating systems like Windows.
    This behaviour, of course, applies also to any subfolders within A & B, so you can't just use the Finder for such a +merge operation+. I'm not 100% sure, but since you were overwriting a lot of stuff, I'd say you're screwed and your data is gone, sorry.
    To avoid things like that in the future, you might want to use software which has the ability to synchronize file structures. In Terminal you can use ditto for that, but there are several GUI apps out there, too. Just search http://www.versiontracker.com for merge or synchronize and you should find something.
    Björn

  • If I configure a buffered pattern input and a buffered pattern output on the 6534 to both operate from the internal clock, will data be transferred out on the same rising edge as data is transfered in or are there two separate oscillators?

    Basically, I want to perform a buffered pattern output synchronously with a buffered pattern input. If I configure the two groups to be internally timed from the same frequency, will the data in be transferred on the same edge as the data out or will the two groups use different oscillators?

    Hi Joseph,
    There are two clocking structures on the 653x boards, one for each group. This means, even if you specify the exact same frequency for both there is no guarantees that they will be synchronized exactly.
    The workaround for synchronizing both groups is to have 1 group clocked internally and 1 group to be clocked externally. Then route the Req line from the internally clocked group to the Req line of the externally clocked group.
    Hope that helps.
    Ron

  • Can i back up more than one iphone onto the same computer and keep data separate?

    can i back up more than one iphone to the same (pc) computer and keep the data separate?

    http://support.apple.com/kb/HT1495

Maybe you are looking for