Lsmw - How to mark a check-box

Hi,
I am creating a very simply LSMW using transaction MBST.
I need to select a specific item to be cancel.
In order to do that, at some point of the recording I need to mark a check-box.
When I execute the BI session the action of "click" the check-box fail.
Any advise?
Thanks in advance

>
Alex Santana Almeida wrote:
> Hi,
>
> I am creating a very simply LSMW using transaction MBST.
>
> I need to select a specific item to be cancel.
>
> In order to do that, at some point of the recording I need to mark a check-box.
>
> When I execute the BI session the action of "click" the check-box fail.
>
> Any advise?
>
> Thanks in advance
This description is a bit short.
when you execute MBST, then all items are checked by default.
so you probably remove all and then want to set it for one item.
Can you post your coding (just this one line) where you moved the X to the box?

Similar Messages

  • How to name the Check Box as "Want Free Gift" using PARAMETERS statements

    Hi all,
    I am new to check boxes. I have a existing report where I have to add a check box to the selection screen.
    So i said
    PARAMETERS: p_cncldc AS CHECKBOX.
    everythibng is fine and I get the check box on the selection screen. when i execute the report i get the name of check box as p_cncldc. but i want the name of the check box as "Want Free Gift".
    How to name the check box as "Want Free Gift".
    if i am saying
    PARAMTERS: Want Free Gift AS CHECKBOX. it says a syntax error saying it canot be more that 8 chars.
    Some one please help. I am new to Check boxes
    Regards,
    Jessica Sam
    Edited by: jessica sam on Mar 31, 2009 10:37 PM

    Text on the Right hand side of check box.
    selection-screen begin of block b1.
    selection-screen begin of line.
    parameters: w_check as checkbox.
    selection-screen: comment  4(30) TEST .
      selection-screen end of line.
    selection-screen end of block b1.
    INITIALIZATION.
    test = 'Want Free Gift AS CHECKBOX'.
    Text on the Left hand side of check box.
    selection-screen begin of block b1.
    selection-screen begin of line.
    selection-screen: comment  2(30) TEST .
    parameters: w_check as checkbox.
      selection-screen end of line.
    selection-screen end of block b1.
    INITIALIZATION.
    test = 'Want Free Gift AS CHECKBOX'.
    OR:
    GOTO(Menubar)>Text Elements>Selection Texts
    Regards,
    Gurpreet

  • How to activate the Check box in Purchase Order after Goods Receipt

    Hi All,
    How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
    Where t make the settings in SPRO.
    Regards,
    Shailendra Hadkar

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • How to handle the check box in the alv tree display

    Hello,
    in my ALV Tree Report i have a check box in the output.
    I have one check box in the selection screen as select all .
    if this is selected then all the check boxes in the output must be selected that is (X).
    am using CL_GUI_ALV_TREE  for this.
    Please give me some input how to make that check boxes 'X' in the above mentioned case.
    With Regards,
    Sumodh.P

    Sumodh,
    check this
    Re: Select all checkbox in ALV tree
    please search before posting
    Thanks
    Bala Duvvuri

  • How to get a check box on the selection screen

    Hi all
    can any body tell me how to get a check box on the selection screen

    parameter: pa_check   as checkbox.
    To define the input field of a parameter as a checkbox, you use the following syntax:
    PARAMETERS <p> ...... AS CHECKBOX ......
    Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
    If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
    REPORT DEMO.
    PARAMETERS: A AS CHECKBOX,
    B AS CHECKBOX DEFAULT 'X'.

  • How to default a check box?

    Hi,
      How to default a check box?
    Regards,
    Jaya

    Hi
    DATA :
       w_c type c value 'X'.
    WRITE :
       w_c as CHECKBOX , 'XYZ'.
    Regards
    Pavan

  • How to keep a check box in script

    hi
    how to keep a check box in script

    Hi,
    go to sapscript editor
    Change the editor to 'PC Editor' and take the menu.
    Include -> Characters -> SAP Symbols
    whether this will not be visible in the print preview.
    other wise..
    Just keep it like <697> in your text element.
    Telephone <697> : &W_TAB-TEL&
    Corresponding symbol will be printed in the paper.
    Note: It will not be displayed in the print priveiw.
    Regards,
    Shiva k

  • How to create a check box that can be unchecked

    How do I create check boxes that can be checked and the unchecked in Forms Central?
    For example, if you accidentally check a box - you want to uncheck it. Right now it doesn't allow you to do that.
    please help.
    Thanks
    Gen

    Are you sure you're not using radio buttons? Check boxes behave the way you'd expect for me with a form generated by FormsCentral.
    I'm going to move this to the FormsCentral form since the team there may want to take a look at the form.

  • How can I take check box in particular cell of the table in smartforms??

    Hi experts,
       pls tell me how can I take check box in particular cell of the table in smartforms??
    It is not interactive form.
    I hv taken small windows as check boxes.but i think it is not a proper solution....give me another solution...

    Hi,
    first create text for a particular cell.
    In that we have a  text editor  in that text editor we have symbols in include menu.
    whatever the symboll u want to put to ur cell . just assign it.
    please check it. if it helpful reward points.
    regards,
    satish.

  • How to display that Check Box In Down of Tabular Rows .

    Dear Friends,
    i have created tabular form and one check box Item in that region.
    i want to display that checkbox Item after tabular form Rows .
    How to display that Check Box In Down of Tabular Rows .
    Thanks

    Hi,
    From report attributes, you can change column order
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/bldapp_rpt.htm#sthref1348
    Regards,
    Jari

  • How to select One Check Box at a time

    Dear All
    I have 10 records in details blok and also I have 10 check boxes .
    I want user can only check one check box at a time .
    For example If first record I have checked and i am trying to check the last record then the first record UNCHECKED and the last record will checked .
    Like how redio buttons work ..
    How can i do that ..?
    I have done like this :-
    1st I have declare a global variable in PRE_FORM :GLOBAL.CNT := 'N';
    Then
    WHEN-CHECKBOX-CHANGED trigger
    IF CHECKBOX_CHECKED(EMP.CHK') THEN
        IF :GLOBAL.CNT != N THEN
            :EMP.CHK := Null
       HERE what to write ???
            RAISE FORM_TRIGGER_FAILURE;
        ELSE
            :GLOBAL.CNT := Y;
        END IF;
    ELSE
        :GLOBAL.CNT := N;
    END IF;Edited by: LuKKa on Aug 29, 2012 1:12 PM
    Edited by: LuKKa on Aug 29, 2012 1:13 PM

    LuKKa,
    An easier method would be to use a Calculated Field to summarize the value of your CHECKBOX Item. For example, add a non-table item (call it SUM_CHECKED) to your detail block and do not assign it to canvas - so it will not be displayed. Then set the following properties of the SIM_CHECKED item:
    Database Item = No
    Calculation Mode = Summary
    Summary Function = Sum
    Summarized Block = <YOUR DETAIL BLOCK>
    Summarized Item = <YOUR CHECKBOX ITEM>
    Next, you will need to change your Detail Block property Query All Records to YES (this is required for the Calulated Item).
    Now, make sure your checkbox is data type NUMBER and has the following minimum properties set:
    Data Type = Number
    Maximum Length = 1
    Initial Value = 0
    Value when Checked = 1
    Value when Unchecked = 0
    Check Box Mapping of Other Values = Not Allowed or Unchecked
    Now, in your Checkbox Item's When-Checkbox-Changed trigger add code similar to this:
    IF ( CHECKBOX_CHECKED('YOUR_DETAIL_BLOCK.YOUR_CHECKBOX_ITEM') ) THEN
       IF ( :YOUR_DETAIL_BLOCK.SUM_CHECKED > 1 ) THEN
       --Reset the checkbox
       :YOUR_DETAIL_BLOCK.YOUR_CHECKBOX_ITEM := NULL;
       MESSAGE('You can only check one item.');
       Message(' ');
       RAISE Form_Trigger_Failure;
       END IF;
    END IF;I have confirmed this method works and it is more efficient than looping through your records to see if other checkboxes are checked.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to read the check box value in alv report

    hi experts,
    i m working on one alv report where i m using the check box for field selection in alv display.
    but i don't know how to read the only selected fields.
    wa_fieldcat-fieldname = 'BOX'.
      wa_fieldcat-tabname = 'IT_HEADER'.
      wa_fieldcat-seltext_m = 'Box'.
      wa_fieldcat-checkbox = 'X'.
      wa_fieldcat-input = 'X'.
      wa_fieldcat-edit = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'AUFNR'.
      wa_fieldcat-tabname = 'IT_HEADER'.
      wa_fieldcat-seltext_m = 'Sales Doc'.
      wa_fieldcat-hotspot = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         i_callback_program                = v_repid
         I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
         i_callback_user_command           = 'USER_COMMAND'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
         it_fieldcat                       = i_fieldcat[]
         i_save                            = 'A'
         it_events                         = v_events
        TABLES
          t_outtab                          = it_header
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    *&      Form  USER_COMMAND
          text
         -->R_UCOMM    text
         -->,          text
         -->RS_SLEFIELDtext
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
      CASE r_ucomm.
    when '&RELEAS'.
    endcase
    endform.
    i gone through some already posted que for same problem i tried options like
    loop at it_header.
    endloop.
    but i m getting box field empty.
    is there i missed something? plz sugeest.. if u have any other solution plz post...

    Have this code in your user command fm:
    * For capturing changed data
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_grid = w_grid.
      CALL METHOD w_grid->check_changed_data
        IMPORTING
          e_valid = w_valid.
      IF w_valid = 'X'.
    loop at itab where mark = 'X'.
    endloop.
    ENDIF.
    Regards,
    Ravi

  • How to add a check box in ALV Grid using SAP R/3 release 4.6b?

    Hello everyone,
    I hope you all fine.
    I'm writing because I have a requirement with ALV Grid,  what I need to do, is to insert a checkbox into a cell, I already read the forum to know how to do that, but I'm using a SAP R/3 release 4.6b, and when I execute the program the checkbox is displayed greyout,  because this release doesn't have the EDIT property into the slis_t_fieldcat_alv.
    Does any body know how to enable the checkbox cell in the ALV Grid for this release?, so it will allow the user to mark the desired rows.
    I'll really appreciate if you guys could help me to find a solution.
    Thanks for your time.
    Regards,
    Guillermo

    Hi,
    if you need just a check box for each line, try to get rid of this line from your layout.
    g_layout-box_fieldname = 'ZZCHECK'.
    SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
    Cheers

  • Putting tick mark into check box in smartform

    hi,
       can any one please let me know if i can put a tick mark in the check box of the smartform.
       for example: i need to select one among yes or no check box. how do i do it.
       should i have to upload a graphic of the tick mark and then display or is there any provision in smartforms to do that.

    Hi,
    Check threads like
    smartform- check box
    and
    what r the steps to display check box in smartform
    Eddy
    PS.
    Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
    Spread the wor(l)d!

  • Is there a way to automatically add a page to my current form when the user marks the check box?

    I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
    I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
    Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
    If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
    I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
    Thanks,

    One word: Templates
    For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
    Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

Maybe you are looking for