LSMW: How to move sub-projects among projects

Dear all,
As stated in the subject, Im looking for a trx or whatever that let me move a whole sub-project from projet X to project Y.
I have been searching on my own, but so far so bad, no luck.
Any help will be really appreciated and rewarded,
Thanks!
Fede

Hello Khairul and thanks for you and all that replied on this thread,
I had already tried what you say, but the field Project appearead grey so I couldnt copy among projects.
I have been researchinga in SAP notes and found this one, which fixed my problem:
#799883
Reason and Prerequisites
Up to now it was not possible to copy subprojects completely into other projects. The LSMW objects always had to be copied separately.
Solution
Importing the specified Support Packages allows you to also select a project other than your own when you copy subprojects.
Since screens are also affected by changes, this modification can only be imported through a Support Package.
Thanks again for your help,
Fede

Similar Messages

MS Project 2010 Server - How to move a single MS Project plan and SharePoint Project site from a PWA server to another PWA server (one at a time)

MS Project 2010 Server
How to move a single MS Project plan and it's SharePoint project site from a PWA server to another PWA server (one at a time)
I have 2 Project PWA servers, i know how to copy all the databases (Publishing, Draft, Reporting, archive, content) from one SQL server and copy it to the other PWA server so both server can be identical.
I need to only move a single project from a PWA server to another,
Moving the Project plan, actual time data, SharePoint site with all it's content
Is there a 3rd party tool that can be added on to the server to help me move single project plans? to different PWA servers?
-Isaack

Visit my friends at FluentPro and try FluentBooks
http://www.fluentpro.com/productsfluentbooks2013.html
they have a 2010 version also.
Hope that helps,
Thanks, Eric S. Pcubed

How to move an uncompleted iMovie project from one hard drive to another?

I want to move an uncompleted iMovie project form one hard drive to another. What do I move to make sure that all of parts of the project: movies, photos, sound, are moved?
Thanks, Bruce

Hi,
You can deploy the ADF Project as an ADF Library Jar file and reuse the taskflow from that jar file in another BPM Application.

How to move master files between projects (within Aperture)

I've imported 6,000 files into Aperture - all into one project, imaginatively named "Photos". Since I imported from a directory structure, underneath this Photos project is a nice structure of folders and albums organising my photos as I did on my hard disk. (I imported references, and then relocated the actual files on disk to a new structure based on year-month-day, ready for amalgamation with 4,000 other photos from iPhoto. So the original disk structure no longer exists.)
Since 6,000 files are too many for one project, I want to split this project into many. I've created some new top-level projects, such as "Macro" and "Flowers", and I now want to move the relevant masters into those projects.
From what I've read, it seems the only way to do so is to drag images from the top level project - certainly when I drag from the albums, only the versions move. But with 6,000 images at the top level, this reorganisation is going to be slow and tedious, and not take advantage of the organisation I'd already done in my folder structure.
Is there anyway to copy from an album, but to move the version's master to the new project too? I've tried option and alt-copying, but it doesn't seem to work.
...Jane

As you said, you can only move masters from project level, won't work if you are in an album. To help you find and select the images you want to move you can use keywords.
For example let's say you want to move all the images you have in the project 'photos' within the album 'macro' to a new project called 'macro'.
Go to the album called 'macro' and select all the images. At the bottom of the browser you have the keyword controls, if you can't see it press shift+d to show them. You can create a temporary keywords group to help you classified the images by project, in this case we create a keyword named 'macro' and apply to all the images within this album.
Now go to the project 'photos' and on the top right of the browser enter the word you wanna look for, in this case macro. Select all those images and drop them to the new project 'macro'. They will be moved.

How to move entire Final Cut Project to CS5?

Hi,
I would like to import my entire final cut pro 7 project (20 bins, 10 sequences, 300+ clips) to Premiere CS5.It is very important that the structure that I have setup be maintained (bins, sequences and the clips within them) About two months a ago, I did this without a hitch..
This time I can't seem to get more than 1 bin and 1 sequence to export from FCP. I checked the master clips, but still 1 bin, 1 sequence. Actually this is more of a FCP question since the issue is with Final cut and not premiere but I'm hoping someone may know the answer.
Help would be greatly appreciated

If anyone else comes across this issue here is how you solve it. Make sure you have the browser window selected and nothing else, then export an XML.

How to move ADF HumanTask (ADF Project) from One BPM Application to ANother

Good DAy!
Problem
We've created huge Project on ADF with difficult form and now we have to create the same (95%) form in another BPM Application
Is it possible to migrate ADF Project from one BPM Application to Another???

Hi,
You can deploy the ADF Project as an ADF Library Jar file and reuse the taskflow from that jar file in another BPM Application.

How to move CodeWarrior plug-in project to Xcode plug-in project??????????

Hi everybody,
I have a problem in moving CodeWarrior Photoshop plug-in project to Xcode Photoshop plug-in project:
1. I had done as step by step in file makingxcodeprojects.html (Conversion process for Adobe Photoshop plug-ins). I thinks who concern this problem always have. But it isn't more detail with moving simpleformat project in CodeWarror to simpleformat project in Xcode.
2. Please, may you give me another example (step by step, i hope it is more detail in configuration step, libraray step, code project step). If so, thanks alot.
Thanks,
[email protected]

After Effects Developer Center

How to move the WSDLs from Project to MDS ?

I have registered MDS using EM Console. I have created JDeveloper connection to MDS as well. I would like to know how to create the WSDL references in MDS store.

Hi ..
If the drag & drop functionality is enabled you can drag the catalog and drop it in another InfoArea just as you do with files on your PC.
The other procedure is Use the right mouse button to create an InfoObject catalog in the InfoArea. If you want to make a copy of an existing InfoObject catalog, specify a reference InfoObject catalog.
and check this thread
Re: Info Object Mapping to Info Area

How to move Event (not necessarily connected to Projects ) and projects to new external drive

I am running Snow Leopard 10.6.8 and iMovie11 9.0.4 have a had very stressful time trying to clear down the Movies folder from my internal drive and get it across to a new external hard drive, as my 700gb drive on my 2009 iMac is practically full. I have taken a full back-up and also created a new 1.5 TB partition on the external drive. However I do not know how to get the Events and Projects across, and for iMovie to know that every thing is now on the new drive.
Initially I copied the 2 folders using finder, which seemingly worked but then I discovered that iMovie did not display the the new events, so I deleted the 2 folders from the external drive and tried manually moving the events in iMovie. This was very slow, with lots of spinning wheels and eventually iMovie crashed. So I moved the new Event copies I did manage to create into trash, but still iMovie was crashing.
I then, thinking something had become corrupted, I tried to restore the Events folder and Projects folder from my backup, but that did not work as I got a message saying the there was not enough space to do the copies (why does it need extra space as I assume it would be overwriting the existing folders ?). So in desperation I did some forum searching and ended up deleting the com.apple.iApps.plist. Now iMovie seems to be working fine, and is displaying al the events from my internal drive (I have ejected all other drives), and I am back to square one (hopefully), however for some reason the 'month' folders I had previously created in each Event 'Year' have disappeared and all the, for example 2013 events, are now under the 2013 folder with no Month sub folders( I assume this is something to do with the preferences I had deleted ?)
I am hoping someone can direct me on the right path for getting the Events (not all of which are used in Projects) and Projects across to the new external drive, so I can free up space on the internal drive (and install Mountain Lion - my end goal).
I have been trying to do all this since 0600 this morning, so if anyome can help it would be very much appreciated.
Jim (now grabbing a much needed beer !)

Do the external drive show up in iMovie 11?? I just drag and drop in iMovie and don't touch it or change in finder.

How do I move a Premier Elements Project to a new computer?

I want to move a Premier Elements Project to a different machine with more efficient RAM and SSDs. How do I move a Premier Elements Project to a new computer?

Welcome to the Premiere Elements Forum.
I constantly migrate my Premiere Projects between my laptop, and my workstation, but I set those Projects up, initially, with that in mind - which is different than having a Project set up on one computer, and then moving it to another. For my setup (remember, this is initially, when I start a Project), see these two articles:
Setting Up Project Folders & Sub-folders
Using External HDD's for Video Editing
For existing Projects, there are a couple of ways to address this. The method that you use, might depend on how you plan on moving the Project.
If you have an external HDD, and plan to use that to do the move, see the "Using External HDD's" article above, as it talks about drive letters in the OS. Getting that correct first, can save a lot of work later.
Then, one can use the Project Archiver to Copy the Project, and necessary files to that external. When one has done that, I strongly suggest that they test that "archived Project," to make sure that the Archiver has gathered everything necessary. The success of that process can depend on how one has set up their folders and sub-folders, and where their Assets (the material that has been Imported into the Project) is located. That is why I always urge one to test everything first. Then, just plug that external HDD into the new computer. At that point, they will have two options: edit to/from the external, or Copy everything to the new computer. For the former, see that "Using External HDD's" article, as there can be some limitations, such as both HDD speed and connection speed, that can impact how well things work.
Next, one could just Copy (over a a wired, or wireless network, or via an external HDD), the Project file (PREL), all Assets, and most of the Scratch Disk folders, to the new computer.
Note: there are files in the Media Cache, such as CFA's and PEK's for the Conformed Audio, that do not have to be Copied/Moved, as PrE will rebuild those (give the program time to do so, and do not edit the Project, until they ARE rebuilt). Same for the Render Files, as if those are needed, one can easily hit Enter/Return, to Render the Timeline, or part of it, again.
Keep the folder structures.
If one gets the "Where is file _____ ?" message, this ARTICLE will be helpful.
Note that the PREL (Project) file is really an XML database. It contains NO MEDIA, but only absolute links to where that media was Imported from. See this ARTICLE for more background.
Good luck, and if you have any questions, or something above was not clear, please ask, before you make the move, as the answers might save you some time, and extra work.
Hunt

How do I combine several short movies into one large project?

You’ll often find a longer project much easier to work with if you work on it in shorter pieces. Doing this can minimize system lugging and maximize program responsiveness as well as reduce the likelihood that you’ll run into problems when you try to output your finished movie.
Once each segment is finished and output, open a new project and combine the segments into a final mix.
In order to do with this minimal loss of quality and maximum performance, you’ll want to output each segment in its ideal video format – a format that the program is designed to work with natively and won’t have to re-render. Instructions for outputting each of these ideal video formats are found below.
The ideal source video format for a standard definition video project is the DV-AVI, although DV-MOVs will also work.
The ideal source video format for a high definition video project is either the 1920x1080 HDV MPEG or the 1920x1080 MTS AVCHD file.
For standard video
If you’d like to export your video project – or even a portion of your project – so that you can import it into a standard definition Premiere Elements video project on a Windows computer, use Publish & Share/Computer/AVI with the DV preset option. The file you output will have an .avi suffix
The Macintosh equivalent to the DV-AVI file is the DV-MOV. To output a DV-MOV file from your project, use Publish & Share/Computer/MOV with the DV preset. The file you output will have a .mov suffix.
For high-definition video
If you’d like to export your video project – or a portion of your project – from an HDV (tape-based high-definition) project for use in another HDV project, use Publish & Share/Computer/MPEG with the MPEG2 1920x1080i 30 preset (or 1920x1080i 25 for PAL).
If you’re working on an Full AVCHD project, output your video by clicking Publish & Share/Computer/AVCHD and using the M2T 1920x1080i preset (with the appropriate frame rate). For more information on outputting AVCHD video.
Both forms of high-definition video will output with the .m2t suffix.
(From The Muvipix.com Guide to Adobe Premiere Elements)

A. Theist wrote:
e.g Chicago - Ballet for a Girl in Buchannon = Seven (7) tracks. How do I turn this into one long track?
The best way is to use an audio editor. A popular one that is free, and has both Windows and Mac versions, is Audacity.
If you want to try to do it with iTunes, you will need to burn the tracks to a CD, and then rip back from the CD using the "join tracks" option. However, this method will not give you any control over the transitions.

How to move iMovie '11 project to Macbook with iDVD

I have a movie I created in iMovie '11 on an iMac without DVD drive or iDVD. I have a Macbook with both. How can I burn the completed project onto a DVD on the other Mac? I have the appropriate Firewire cable. Thanks.

Copy the iMovie projec file, xxxxxx.iMovieProject to the other Mac and put it in the Movies folder. Open it with iMovie, use the Share ➙ Media Browser menu option to get it out of iMovie so iDVD and import it from it's Media/Movies pane.
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to move a photo into a different project

I'm trying to clean up my projects and organize them better, but I'm stuck because I have mistakenly gathered unrelated photos into too many projects. I just want to move a photo from one project to another, but I'm not getting how to do it. I've been able to merge projects which has helped a lot, but some photos just don't belong in the projects they are in. Is there some simple thing I'm missing?

Drag the selected Image(s) from the Browser and drop them on the target Project's name in the Library Inspector.
You may find it helpful to flag Images in various containers that you want to move into a specific Project, then select the Flagged container from the Library inspector, select all the flagged Images, and drag-and-drop them into the target Project.
More information is here in the User Manual.
HTH,
--Kirby.

How to move Projects and Events with iPhoto video included in iMovie '11?

I work with a group of educators using iPads for video. One method for getting their clips into iMovie '11 is via iPhoto and then using the iPhoto Video link in iMovie to get the footage on a timeline (trying to import directly into iMovie '11, using the iPad as a "camera", has proved inconsistent, especially with footage from iStopMotion or Filmic Pro 1 and 2).
The problem is, when it comes time to copy or move an event and project, the iPhoto clips don't come along; they are dependent on the iPhoto library, so you can't continue editing on a different machine. I tried File > Consolidate Media, but it was inactive (in my test project, all clips came from iPhoto). If I look at Reveal in Browser, it goes to the bowels of the iPhoto library. If I copy the project to another drive, it too, points to the iPhoto library (if I'm on the same machine; otherwise it doesn't see it). I also tried optimizing the footage in the hope that it would create an Event with optimized clips that I could then transfer.
Am I missing something? It seems nuts that you can't transfer work to another machine without manually picking through the bowels of iPhoto. These days, lots of shooting is done on iPads and iPhones. Any help would be appreciated.

My suggestion would be that in the future, they upload photos only to iphoto, and upload video clips directly to iMovie. In the early days of iOS, going through iPhoto was the only way, so it is a habit that I have had to break.
With iOS 5 and 6, iMovie now recognizes the iPhone and the iPad as cameras.
I agree that the Consolidate Media command should bring over iPHoto movies along with the photos. I suggest that you go to iMovie/Provide Feedback and let the developers know that you would like this feature.

How do you Move an iMovie '08 Project to Another Mac?

What's the best way to move an iMovie '08 project to another Mac on my network? (Both Macs have iMovie '08.) Specifically, is there an easy way to move a project and the event containing the imported clips in one step?
Often, I'll do work on my Intel MacBook then transfer stuff to my Intel iMac for long term storage. In iMovie '08, I tried various imports and exports and nothing worked so well. For example, when you drag and drop a project file from one computer to another the clips don't come with it. You can play the movie but the clips in the media browser are grayed-out.
There ought to be something like the archive routine that packages up everything and lets you put it on another computer for further editing.
Thanks!

I would like to know the same thing but not for another Mac... just another user. Should be almost the same procedure right?
My iMovie '08 is crashing like crazy! I just want to get the projects into iMovie using a fresh user and hope that fixes it. I can see where copying/moving preferences into the library of the other user (along with duping the projects in the movies folder) might succeed in opening the project in another user. I'm just afraid of moving bad prefs or something.

LSMW: How to move sub-projects among projects

Similar Messages

Maybe you are looking for