LSMW / In Production, throws me out of SAP at READ DATA - 9th stage

Hi experts,
Am trying to load data via LSMW from text file, my issue is,
When I do this in Production, it just crashes and throws me out of SAP at the "READ DATA" stage,
So, any clue that Why it is so? How to fix it?
thanq
Edited by: Alvaro Tejada Galindo on Feb 27, 2008 12:25 PM
Edited by: Srinivas on Feb 27, 2008 12:29 PM
Edited by: Srinivas on Feb 27, 2008 12:30 PM

Hi Srinivas,
Strange that this only occurs in Production. Could try to switch on debugging and step forward until the error occurs? Perhaps this gives a clue what the problem might be.
Regards,
John.

Similar Messages

To find out how SAP is handling language support in the standard product.

Hi All,
i have one issue like "To find out how SAP is handling language support in the standard product". Any body have the solution, please send me as soon as possible.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.

It would be easier to send a solution if you'd clearly defined the problem!.
SAP is built to be multilingual.
For ABAP development, to ensure that your code is able to be multilingual, you should not hard code any text that the users could see - you should instead use text elements, standard texts, OTR, message classes etc.
matt

LSMW Read Data behaving differently in production and in ECC

Hi All,
I have writte a LSMW for CJ12 longtext and it is working fine in development but in production it giving error message at 13th step as BDC_INSERT, Transaction code .. is invalid and when i try to simulate the issue i found that in Read Data step i found the difference as transactions read in development are 399 where as the transactions read in production are 267 for the same file.And i debugged the Display Read program and observed that the read program used GUI_UPLOAD to read the data from the text file.and there itself the GUI_UPLOAD internal table contains 399 in development and 267 in production.I tried to simulate why this is happening but coldn't figure out.Can any one help me why this has happened.And we are using ECC6 with EHP4 in development and EHP3 in production and it has to upgrade to EHP4.

if you are really certain about the source file (I doupt too) then there are only 2 more possibilities
a) your LSMW object is different (transport it again from developement to production, only so you can be sure that LSMW object and source will be the same)
b) a real SAP error because of different release levels. Open a ticket at SAP to get help.

How to route the information to approver with out involving sap workflows.

Hi Developers,
i have a doubt regarding how the requester filled form information will be send to approver with out involving SAP workflows in the portal.
Normally i know the procedure where users fills the form with the approver details, the filled information is routed to approver UWL by trigerring a function module thru webdynpro.
But i need to know is there any procedure to route the information without involving any backends.
Thanks in Advance.

Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

MRP Generated production orders greys out Sales Order and Customer fields

Hi there,
The MRP generated production orders greys out the Sales Order and Customer fields for some reasons. These fields are really important as they link the production order to the sales order and the customer's purchase order. Could the SAP team please fix this or advise alternative way of getting the sales order and customer info on production order? Thanks.

Hello
MRP only poulated this fields in case the material master has been set up with a strategy group hich is make to order (normally 20). Otherwise MRP summarizes all the requirements from different Customer orders and creates a production order
Stephan

How to make a Roll Out in SAP BW

Dear Gurus,
In a few days I'm going to work in a Roll Out of SAP BW and I have never worked in a Roll Out. The idea is that a company should have the same BW than the pater company. I have to ensure and prevent that they will won't have any problem when we add the same BW to the company.
I would like to know the steps that I should make. Some of the things I think I have to check are: Check that the data sources in R3 extract the information, check they need the same infoobjects than the parent company and if they need new ones. Check that they use the same reports, etc.
Any information you can add about this? I've been seeking in SCN but I haven't found information about this.
Many thanks!
Regards,
J.

Hi,
Below are my suggestions for the rolll out ( new Bi system development which will use the existing the ECC system) and it will be fast too.
1)Ask your basis system to build a BW system same like existing with a different SID. This will ensure all your BW data models will come as like that. They will do an export and will build the new system.Depending upon the size and back size strategy it will take upto max 1 week to build a new system.
2) Now connect all the source systems to this new BW system.
3)Replicate and activate the Datasources which ever required.
4) Fill the set up tables in ECC for LO **** pit datasources by deleting the set up tables.
5) start the init loading for this datasources. If it is finance , just trigger the init infopackage.
6) As delta queue is based upon a combination of datasource and source system , your earlier BW system will not have any impact.
7) You can have new developments in this new system too .
8) Transport path is most important... You can use one development and different quality and productions or multiple development , quality and productions.
DBW-->QBW-->PBW
DEC-->QEC-->PEC
I suggest first you can have one development and then different quality and prodcutions. This saves the development time and also resource cost. Hope this info is useful
Regards,
Rajesh.

Production order print out

Hi friends,
i would like to know the configuration setting required for shop floor paper print out like producton order, confirmation, time ticket etc. i have checked execute printing in opkp. in control key, print, print time ticket, print confirmation are checked . in co04, and co04n i am not able to get the production order print out.
in opk8 please tell the required confirmation in detail (step by step)
regards'
Arun

Need to do the setting in OPK8
first check the configutaion link below and then come bsck w/yr doubt
http://help.sap.com/saphelp_40b/helpdata/en/3a/72369adc56d11195100060b03c6b76/frameset.htm

How to find out Which SAP programs are affecting Which Z programs?

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fix

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.

run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.

Phone locked up- and I am ready to throw it out the window

Last night before going to bed, I plugged my phone in to charge. (Using the IPhone charger and plugged into the wall). My phone is currently showing the battery, yesterday's date and the time of 9:22pm. I can't get the phone to do anything. I just held down the on/off button for 5 minutes but I can't get it to turn off.
This is the second phone that I have had that has this issue (returned the first one and it was sent in to Apple. I got a letter back that they could not fix it and they sent a new phone).
Any suggestions??

Any suggestions??
Yes - don't throw it out the window.
If you are unable to perform a Reset by pressing and holding the Home key and Sleep/Wake key simultaneously until seeing the white Apple logo and then release which forces a system restart or this doesn't work and if so, you are also unable to perform a complete Restore, call AppleCare - (800) 694-7466.

Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

Sorry, does this link work
http://www.apple.com/support/appleid/
I ended up having them call me then was able to give them 1 of my secret questions right and they reset things so I could reset all my secret questions.
Try going into contact support and see if you can schedule a call. There seems to be some issues with peoples' id's and this update. iTunes thought that I'd never bought anything from my computer or device before, and I clearly had, so it's like it got confused. THen I tried to get my questions reset, but the mail never came, which is why I just got a phone call because I felt it was 'real person' time.

Why does my ipad keep throwing me out of games and apps?

Why does my ipad keep throwing me out of games and apps?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I have an original iPad running 5.1.1. It has started throwing me out of safari to the point it is now unusable. Have tried everything including full restore but problem persists?

I have an original iPad running 5.1.1. It has started throwing me out of safari to the point it is now unusable. Have tried everything including full restore but problem persists?

Try a few things:
First, try double tapping the home button. You should see a row of apps at the bottom; these are your recenty opened apps. Hold your finger down on any of the icons until they start to shake, and a red minus() appears. Tap the red minus for each app. This will close the app, not delete it. If you have too many apps open, this can cause crashes.
If it still crashes, try the basic troubleshooting steps here:
Basic Troubleshooting Steps for iOS
(Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

How to find out where sap error messages stored...

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Hi,
I also got the same message when that message no is not there
E:SABAPDOCU:000 test
yours is S-type and message id ZY and message no 127
127 is not there either change the no or create the same
Regards
Shiva

LSMW / In Production, throws me out of SAP at READ DATA - 9th stage

Similar Messages

Maybe you are looking for