LSMW issue while changing Customer(XD02)

Hi Experts,
I need to update the Bank details for single customer.
Actual Issue: I can insert a Bank details for a customer from flat file but if a customer has two Bank details(assume as line item) then how to handle this type of scenario using LSMW tool.
Please help me on this!
Thanks
Regards,
Vishwa

I would analyze the data first to find out how much cases will jsut get one bank and how much will have multiple.
If there are only a few with multiple, then it is probably done much quicker manually for those, and you can upload all others that have only one.
If there are many, then I would analyze what the maximum number of banks per customer is, and then put the cursor one line after the highest number and add whatever I need to add. SAP automatically skips the empty lines.
This was for recording with LSMW.
Edited by: Jürgen L. on Jun 9, 2011 11:02 PM

Similar Messages

Issue while changing Item Category during Sales Order Creation

Hi,
Requirement:
Requirement is to change the item category of Sales Order item while creating the sales order.
Rule is: If item category is IRAT then it should be changed to IRLN.
For this, I am using the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE" available in the include MV45AFZZ.
Issue:
Using the above mentioned exit, Item category is getting changed to the desired value in the created sales order BUT value of Billing Status (VBUP-FKSAA) which is supposed to get changed is blank.
For example, Sales order is created from VA01 and item category is changed manually to the value mentioned above, then for the sales order created we have VBUP-FKSAA = 'A'. But when value of Item category is not changed manually and it is changed from the exit, then value of VBUP-FKSAA is blank.
I have to find a solution which would change the value of Billing Status according to the change in the value of Item Category.
Please suggest a relevant solution.
Thanks a lot for responding.
Abhinav.
Edited by: Abhinav Jain on Apr 9, 2010 6:47 PM

Hi Abhinav,
I have a simmilar problem. In my case I am changing Reason of Rejection in the user-exit, but net value is not getting updated. Did you solve your problem? Any other way to change a field of a sales order item?
Thanking you in advance,
Nisha

BDC for change customer(XD02)

Friends,
Actually I need to write a BDC to chnage the customer telephone numbers in XD02, but strange that it doesn't get recorded in SHDB properly. How to change the existing telephone numbers as they are in the table control and no function code is recorded in the SHDB to proceess them one by one.
Has anybody come accross this.
Please suggest.
Many Thanks,
Albert.

hi
good
wheather you r using your own value or using the value that is present in the table control?
if you r using your own value than check the format in which the telephone number should be,
if you r taking the value from the table control , and you want to change the telephone number of present in that table conrol than you have to change the standard program related to xd02.
thanks
mrutyun^

Issue while changing fields in a fillable form PDF (Acrobat 10.1.4 Pro)

Good Afternoon!
This is my first time posting here, so forgive me if this is in the wrong place.
I am an IT technician trying to support a user who is trying to change a PDF into a fillable form using Acrobat 10.1.4. She is trying to use the wizard as shown in the image below:
When she uses this function, Acrobat goes through and automatically detects all possible fields and creates them for her. Below is an image of the result:
What she is trying to do is change some of the field types - specifically, she wants to change the box next to "Adult/non-college request" to a check box. She right clicks on this field to change it, and when she does, Acrobat simply closes. No error comes up, and she is not given the option to save the document - when she opens it again, it is an ordinary PDF. In addition, if she creates the form, and then only tries to save the form (without trying to change the fields), Acrobat again simply closes itself. However, she is able to manually create fillable fields if she does not use the wizard at all, and the document functions normally.
Any help with this issue would be most appreciated.

Save early and often.
I would save the result right after the wizard has made its errors.
One needs to delete the form field and then manually add the correct type of field. If you want that check box and the next to be mutually exclusive, one gives them the same name and sets the export value for each check box to a unique value.
I edit forms by opening the "Tools => Forms => Edit fields".
How to create editable PDF form fields
I do not like the wizards and create forms by adding all form fields manually according to my planned form design.

Issue while changing validity date for assigned roles: SAP IDM 7.2 SP8

Hello Experts
I assigned the Task on repository for validity modification for Roles as in below screenshot:
When I modify the role validity, Task defined for Validity modification doesnt get triggered and IDM executes the tasks defined as Modify Task and fails with below errors:
1. Could not obtain repository name from Pending object.
2. Error ! Audit id , Variable doesnt exist in MXPT_GET_ENTRYTYPE.
I tried checking provisioning audit logs but could'nt find any Audit ID created for validity modification and I guess due to this tasks are getting cancelled.
Why the task defined in Modify Valdity tasks doesnt get triggered when I modify the Role assignment validity ?
Am I doing anything wrong with the SAP Standard way of working ?
Regards
Deepak Gupta

Hi Deepak/Chris,
We are also facing a similar issue in our project where modifying validity of the role does not trigger any task. We then changed the Modify attribute(in task tab) on the priveleges to "inhereted".
The modify task is now triggered and completes successfully. However, no changes occur in backend.
We need unedrstand where do we maintain the setting to define which attributes(if changed) will trigger an event task in the provisioning framework. the "check attributes modification" task within the provisioning framework executes the below query:
select COUNT(VarName) from mxpv_audit_variables where AuditID=%AUDITID% and VarValue='%MSKEY%' and VarName='MARK_EXEC_MODIFY_ATTR%MSKEY%'
The query gives the result as "False" in case we only modify the validity of the role assigned to user. Thus no event tasks are executed for the same.
Can anyone please share where do we define the attributes for this query to give "True" as result for role validity modification.
regards,
Nits

LSMW issue while uploading the hiring data

Dear Experts,
I am trying to create LSMW to upload hiring data for IT0000, IT0001, IT0002. Initially i tried with PA40 recording, but it was not selecting my respective action type. Then i tried with PA30 with external no. range, but still its not selecting action infotype.
I used the following source file data for recording, please check and advise anything if i need to modify
PERNR     N     008
SELEC_01     C     001
TIMR6     C     001
CHOIC     C     035
SUBTY     C     004
BEGDA     DDMMYY     010
ENDDA     DDMMYY     010
MASSN     C     002
MASSG     C     002
PLANS     N     008
WERKS     C     004
PERSG     C     001
PERSK     C     002
BTRTL     C     004
ABKRS     C     002
VDSK1     C     014
NACHN     C     040
VORNA     C     040
TITEL     C     015
GESCH     C     001
SPRSL     C     002
GBDAT     DDMMYY     010
FATXT     C     006
GBORT     C     040
GBLND     C     003
GBDEP     C     003
KITXT     C     004
NATIO     C     003
Regards
Tan

Hi,
I am running it on foreground with external no. range for two employees. My main issue is its not selecting the action infotype from PA30 screen only.
How to test in display mode...please suggest
Regards
Tan

Performance Issue while changing a characteristic using CT04 transaction

Hi Experts,
Just now we have upgraded our system from 4.6C to ECC 6.0. In the new system we have created some characteristics and later I am trying to change these characteristics using transaction CT04 .
There are some characteristics which are already present in the new system which has come from 4.6 C. Now when I try to open/change these characteristic (already existing) using CT04 it does not take any time where as if I try to open/change a characteristic which is created newly in ECC 6.0, then it takes a lot of time.
When I run SQL trace for both the scenario, then I find that most of the time taken is on Query on table PLFV.
Trace Result for Newly Created Characteristic :
115 PLFV PREPARE 0 SELECT WHERE "MANDT" = :A0 AND "ATINN"
= :A1 AND "LOEKZ" = :A2 AND ROWNUM <= :A3
3 PLFV OPEN 0 SELECT WHERE "MANDT" = '070' AND "ATINN" =
0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1
336681733 PLFV FETCH 0 1403
For this time taken is 336681733 .
Trace Result for Existing Characteristic :
2 PLFV OPEN 0 SELECT WHERE "MANDT" = '070' AND "
ATINN" = 0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1
For this time taken is 2.
Here one difference I see is that for the Newly created characteristic, Prepare, Open and Fetch part is executed where as for the already existing query only Open is executed.
The program which is used for querying PLFV is SAPLCMX_TOOLS_CHARACTERISTICS.
Could you please help me in this.
Your response is highly appreciated.
Regards,
Lalit Kabra

Hi Rob,
Thanks for the response. But the problem which I mentioned is not with all the characteristics. It occurs only with those characteristics which are newly created. The characteristics which are already created are opened without any delay.
So I am bit confused whether for this problem there would be be any note though I tried searching the same as well.
Please respond if some one has clue about this issue.
Your response is highly appreciated.
Regards,
Lalit Kabra

Issue while changing activity partner in BAPI BAPI_ACTIVITYCRM_CHANGEMULTI

Hi,
I'm trying to change 'Activity Partner' for an activity using BAPI BAPI_ACTIVITYCRM_CHANGEMULTI. But the function module is giving me an error 'Document could not be saved.'. I'm already calling BAPI_ACTIVITYCRM_SAVE BAPI_TRANSACTION_COMMIT after the main BAPI.
Can someone help me? Any help would be highly appreciated.
Here are the parameters I'm filling for the above BAPIs.
BAPI_ACTIVITYCRM_CHANGEMULTI
    lt_header-guid         = t_tgtact-act_guid.
    lt_header-object_id    = t_tgtact-act_no_crm.
    lt_header-mode         = 'B'. "Change
    lt_headerx-guid         = c_x.
    lt_headerx-object_id    = c_x.
    lt_header-mode          = c_x.
    lt_partner-ref_guid           = <original BP guid>
    lt_partner-ref_kind           = 'A'.
    lt_partner-ref_partner_handle = '0001'.
    lt_partner-ref_partner_fct    = '00000009'. "Act part
    lt_partner-partner_fct = '00000009'. "Act part
    lt_partner-partner_no   = <new BP no>.
    lt_partner-no_type      = 'BP'."bus. partner no
    lt_partner-display_type = 'BP'."bus. partner no
    lt_partnerx-ref_guid           = c_x.
    lt_partnerx-ref_kind           = c_x.
    lt_partnerx-ref_partner_handle = c_x.
    lt_partnerx-ref_partner_fct    = c_x.
    lt_partnerx-partner_fct = c_x.
    lt_partnerx-partner_no   = c_x.
    lt_partnerx-no_type      = c_x.
    lt_partnerx-display_type = c_x.
BAPI_ACTIVITYCRM_SAVE
    lt_objtosave-guid        = <act_guid>
    lt_objtosave-OBJECT_TYPE = 'BUS2000126'.

Hi Vivek,
Thanks for the reply. I have made the changes. Could you please see the code below? I believe that the parter and partnerx table will only have one entry each.
Please let me know if I'm doing something wrong here. Thanks!
Header -
    lt_header-guid         = t_tgtact-act_guid.
    lt_header-handle       = '0001'.
    lt_header-mode         = 'B'. "Change
    lt_headerx-guid         = c_x.
    lt_headerx-handle       = c_x.
    lt_headerx-mode         = c_x.
Reference -------------------------------*
    lt_partner-ref_guid           = t_tgtact-act_guid.
    lt_partner-ref_kind           = 'B'.
    lt_partner-ref_handle         = lt_header-handle.
    lt_partnerx-ref_guid           = c_x.
    lt_partnerx-ref_kind           = c_x.
    lt_partnerx-ref_handle         = c_x.
Reference Partner ---------------------------*
    lt_partner-ref_partner_handle = '0002'.
    lt_partner-ref_partner_fct    = c_parfn_actbp.
    lt_partner-ref_partner_no     = t_tgtact-bpno.
    lt_partner-ref_no_type        = 'BP'.
    lt_partner-ref_display_type   = 'BP'.
    lt_partnerx-ref_partner_handle = c_x.
    lt_partnerx-ref_partner_fct    = c_x.
    lt_partnerx-ref_partner_no     = c_x.
    lt_partnerx-ref_no_type        = c_x.
    lt_partnerx-ref_display_type   = c_x.
New Partner ---------------------------*
    lt_partner-partner_fct = c_parfn_actbp.
    lt_partner-partner_no   = t_tgtact-tgt_bpno.
    lt_partner-no_type      = 'BP'.
    lt_partner-display_type = 'BP'.
    lt_partnerx-partner_fct = c_x.
    lt_partnerx-partner_no   = c_x.
    lt_partnerx-no_type      = c_x.
    lt_partnerx-display_type = c_x.
Object to Save -
    lt_objtosave-guid        = t_tgtact-act_guid.
    lt_objtosave-object_type = 'BUS2000126'.
    append: lt_header, lt_headerx.
    append: lt_partner, lt_partnerx.
    append: lt_objtosave.

Performance Issue while changing Characteristics from CT04

Hi Experts,
Just now we have upgraded our system from 4.6C to ECC 6.0. In the new system we have created some characteristics and later I am trying to change these characteristics using transaction CT04 .
There are some characteristics which are already present in the new system which has come from 4.6 C. Now when I try to open/change these characteristic (already existing) using CT04 it does not take any time where as if I try to open/change a characteristic which is created newly in ECC 6.0, then it takes a lot of time.
When I run SQL trace for both the scenario, then I find that most of the time taken is on Query on table PLFV.
Trace Result for Newly Created Characteristic :
115 PLFV       PREPARE      0     SELECT WHERE "MANDT" = :A0 AND "ATINN"
      = :A1 AND "LOEKZ" = :A2 AND ROWNUM <= :A3
3 PLFV       OPEN                 0   SELECT WHERE "MANDT" = '070' AND "ATINN" =
   0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1*
336681733 PLFV       FETCH       0   1403
For this time taken is 336681733 .
Trace Result for Existing Characteristic :
2    PLFV       OPEN               0           SELECT WHERE "MANDT" = '070' AND "
                                                              ATINN" = 0000000575 AND "LOEKZ" = ' ' AND ROWNUM <= 1
For this time taken is 2.
Here one difference I see is that for the Newly created characteristic, Prepare, Open and Fetch part is executed where as for the already existing query only Open is executed.
The program which is used for querying PLFV is SAPLCMX_TOOLS_CHARACTERISTICS.
Could you please help me in this.
Your response is highly appreciated.
Regards,
Lalit Kabra

hi Rajesh,
Pls check the below comments
Please install the Oracle optimizer patch 6740811 and 6455795 as per
note 871096. Also ensure you have installed the other patches listed in
the same note as these are mandatory when running on Oracle 10.2
If this does not solve your problem open an OSS message for this.
Regards,
Lalit

Issues while changing primary key in table

Hi
I have one table. In that two fields are primary key. I want to change the second PK as FK only. But when i am changing this field as FK. Its showing one error 'Primary Key Change not permitted for value Table ZCAUSECATMASTER' . How to avoid this error.
Please help me.

Hi.....
Remove that primary key for the second field and assign your foregin key..table to that filed.....
So when you give entries in that second filed it will be validated with its foregin key table......its nothing but check table...
what all values in the foregin table only can given.....
regards
raja

Issue while importing customer records from Staging tables

hi,
we are trying to insert customer records from other erp system to oracle ebs.
We are able to push the data into staging table and call the procedure 'hz_cust_account_v2pub.create_cust_account'
Now we could see the data being entered in 'HZ_PARTIES'
but could not see the records from frontend.
On the other hand in case of vendors and employee we could see the data from frontend as well
Is there any particular flag or field we are missing?
thanks for the help in advance
Edited by: sam on Sep 13, 2012 1:15 AM

Has the " DQM Serial Sync Index Program" run after you have run the import? If not try and manually submit this job and see if you can view your changes

Issue while updating(Changing) quantity on line at quick sales order form

Hi,
I am facing a issue while changing quantity ordered on the order line in quick sales order form. (R12.1.3)
Although the same logic works exactly as required in 11.5.9.
There is a custom logic, post booking line status is Awaiting Shipping.
Now when quantity is changed +(Saved), the status changes to a custom state but at the same time a new row is created with the same line id but different reservation id in the MTL_RESERVATIONS.
The quantity here is the difference between the original quantity and the new entered quantity.
And post completion of the custom logic the original row is updated, but being there a additional row the quantity reserved at the shipping tab comes wrong.
Our requirement is of update which is happening but not the additional insert which is going into MTL_RESERVATIONS.
The logic is perfect in 11.5.9 and no additional insert is being made.
Kindly help and give some ideas for the possible reason the issue.
Please ask for more information if required.
Thanks,
Vishal

Hi Mahendra,
I have gone through the note id that you have given. sorry to say that, that is refering to diffrent issue.
Actually what i did is, At form header level, I have hide the fileds using the folder options. once after changes I have closed the form and re-opened it. by that time I can see that Button names got changed in bottom of the "Quick sales order form". Not sure how it become changed. there five buttons over the form, only two button names got changed.
Kindly suggest any other options.

Error while changing PO in SRM extended classic Version 5.0

Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
Srujank

Hello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima

Error while changing the component quantity

Hi Experts,
I facing an issue, while changing the component quantity of the process order. Parent material have fixed lot size and the componenets maintained as fixed quantity in BOM. When I try to change the quantity of the components in process order, it showing an message "Please re-explode the BOM, since the component quanities are changed.
Why am getting this message?
Regards,
Sureshbabu G.

Hi
As Mr Reddy said, there is a fixed quantity indicator ticked in the BOM, therefore you are getting that error. Please remove the tick in BOM in the item details besides the quantity field and then try changing the quantites while confirming.
Chandra

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

LSMW issue while changing Customer(XD02)

Similar Messages

Maybe you are looking for