LSMW Master Data Load issue for UOM.

Hello Friends,
I hope that someone out there can provide a answer to my question.
I am attempting to use LSMW to load Alternate units of measure via MM02. The Main data is already in the system.
My Flat file has 2 levels.
Header--> contains Material Number
Line --> contains data relevant to each UOM that I want to enter.
When I do the Direct Input Method, I get the following message:
"The material cannot be maintained since no maintainable data transferred"
Here is the format of the flat file.
SOURCEHEAD HEADER
IND C(001) INDICATOR
Identifing Field Content: H
MATNR C(018) Material
SOURCELINE UOM DATA
IND C(001) INDICATOR
Identifing Field Content: L
MAT C(018) MAT
UMREN C(005) Denominator for conversion to base units of measure
MEINH C(003) Alternate Unit of measure sku
UMREZ C(005) numerator for conversion to base units of measure
EAN11 C(018) International Article Number (EAN/UPC)
NUMTP C(002) Category of International Article Number (EAN)
LAENG C(013) Length
BREIT C(013) Width
HOEHE C(013) Height
MEABM C(003) Unit of Dimension for Length/Width/Height
VOLUM C(013) Volume
VOLEH C(003) Volume unit
BRGEW C(013) Gross weight
NTGEW C(013) Net weight
GEWEI C(003) Weight Unit
When I manually process the data, I have no issues.
I am thinking that I may just be missing some piece of information necessary to get this data processed, am can not see what the answer is.
Any Help that can be provided would be great.
Regards,
Christopher

Hello,
You need to map BMMH1 along with BMMH6.
Map TCODE& MATNR in BMMH1 with XEIK1 = 'X' (BasicData). Subsequently map fields of structure: BMMH6.
I just made a test now and it works fine for me.
Hope this helps.
Best Regards, Murugesh AS

Similar Messages

  • LSMW Master Data Load issue.

    Hello Friends,
    I hope that someone out there can provide a answer to my question.
    I am attempting to use LSMW to load Alternate units of measure via MM02. The Main data is already in the system.
    My Flat file has 2 levels.
    Header--> contains Material Number
    Line --> contains data relevant to each UOM that I want to enter.
    When I do the Direct Input Method, I get the following message:
    "The material cannot be maintained since no maintainable data transferred"
    Here is the format of the flat file.
    SOURCEHEAD                HEADER                                                                               
    IND                            C(001)    INDICATOR               
                                       Identifing Field Content: H       
        MATNR                          C(018)    Material                
    SOURCELINE                UOM DATA                                                                               
    IND                            C(001)    INDICATOR                                                                               
    Identifing Field Content: L                                  
         MAT                            C(018)    MAT                                                
         UMREN                          C(005)    Denominator for conversion to base units of measure
         MEINH                          C(003)    Alternate Unit of measure sku                      
         UMREZ                          C(005)    numerator for conversion to base units of measure  
         EAN11                          C(018)    International Article Number (EAN/UPC)             
         NUMTP                          C(002)    Category of International Article Number (EAN)     
         LAENG                          C(013)    Length                                             
         BREIT                          C(013)    Width                                              
         HOEHE                          C(013)    Height                                             
         MEABM                          C(003)    Unit of Dimension for Length/Width/Height          
         VOLUM                          C(013)    Volume                                             
         VOLEH                          C(003)    Volume unit                                        
         BRGEW                          C(013)    Gross weight                                       
         NTGEW                          C(013)    Net weight                                         
         GEWEI                          C(003)    Weight Unit                                        
    When I manually process the data, I have no issues.
    I am thinking that I may just be missing some piece of information necessary to get this data processed, am can not see what the answer is.
    Any Help that can be provided would be great.
    Regards,
    Christopher

    Answered. Problem was that the Basic Data one flag was not set. Thanks to  Murugesh AS

  • Master data loading issue

    Hi gurus,
        Presently i am working on BI 7.0.I have small issue regarding master data loading.
        I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
       How can i handle this.
    Best Regards
    Prasad

    Hi Prasad,
    Following is happening in your case:
    <b>Loading 1st Time:</b>
    1. Data loaded to PSA through ipack.It is a full load.
    2. data loaded to infoobject through DTP.
    <b>Loading 2nd Time:</b>
    1. Data is again loaded to PSA. It is a full load.
    2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
    Please clear the PSA after the data is loaded to infoobject.
    Assign points if helpful.
    Regards,
    Tej Trivedi

  • Error in 0EMPLOYEE Master Data Load Issue

    Hi,
    We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
    Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
    Can you please advice, how can we fix this issue ASAP as its a production issue?
    Thanks!
    Best regards,
    Venkata

    > Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
    May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
    Cheers,
    Sree

  • Master Data Load Issue

    Hi Experts,
    This is regarding an issue with Master Data "DELTA" load.
    WBSe master data has below fields
    WBSe
    Approval Year
    Program definition
    Program position
    Funding Type
    ABCD
    2014
    ZZPA
    Z_ABCD
    CB
    Program Position master data has below fields
    Approval Year
    Program definition
    Program position
    Funding Type
    2014
    ZZPA
    Z_ABCD
    DC
    WBSe master data table has "look up" for program position to populate "funding type" based on Approval Year,Program Definition and Program Position.
    The issue is, daily delta load is not getting "recent/new funding type values".
    But, If load the same record with program position selection in FULL Load, the new funding type is getting updated.
    Please tell me why "funding Type" is not getting updated with new value in DELTA load.
    Thanks
    Asha

    Hi Asha,
    In delta mode only new or changed records are loaded to WBSe MD,
    and look up will only pick up data if data is loaded from Data Source to WBSe MD.
    There are 2 solutions to this :-
    1) change WBSe MD to full load, it will take care, as MD is always over written.
    2) Enhance this field in Source system, i.e. Data Source enhacement, if you know the Table for look up in source system.
    Thanks and Regards,
    Amit.

  • SPM Master Data Load Issue

    We are on SPM 3.0 SP3 (BW on HANA) We get the following error:
    "Data target EXPORT data cluster too large for application buff () inactive; processing stopped. Activate data target"
    when we load a master data file which has more than 4000 rows. Some of our files have 300000 rows and splitting the files into smaller chunks cannot be an option.  We have tried the option provided by a SAP note to adjust the parameters for the infopackage. We have also tried tweaking the packet size in the RSXAADMIN table.
    Any help in resolving this issue is appreciated.
    Thanks,
    Mani

    Hi Mani,
    Select the infopackage and reduce "Maximum size of a data packet in rows" to 1000 by default its value should be 20000 reduce it to 1000.
    If still don't work reduce it further like 800 or less.
    Let me know if you need further help.
    Assign point if helped.
    Regards,
    Aditya Panwar

  • Master data load issue in BPC Dimensions

    Hi BPC Experts,
    I am facing an issue when loading master data to BPC dimensions.I have an Infoobject called Prodtype.I loaded master data and text to prodtype infoobject.Then i locked the BPC dimension C_Prodtype and executed DTP to load attributes and text from infoobject prodtype to BPC dimension C_Prodtype  .We able to see the data in BPC dimension C_Prodtype.By using program we are updating the BPC Dimensions  C_Prodtype.But this product type values are not displayed in BPC Administration.
    I request your help in solving this issue
    Thanks
    Mahesh

    Hi Mahesh,
    Please log into BPC admin console. Select the dimension and click on "export dimension" from the action pane.
    Hope this helps.

  • Master data load issue with flexible data source

    Hi All,
    1CL_OLIS001have this data source for loading configuration data. the changed records are not updating into this DS regularly.
    I have delta load on this every day. It loads correct data for one month and suddently it will start loading 0 records every day with out failing. If I reset the delta, it will work fine for month or two and then will corrupt again.
    Is any one have this kind of issue before Please suggest to resolve this issue permanently?
    Thanks and Regards,
    Pooja

    Hi Pooja,
    1) It might be Database table space issue in the backround, Please checkit out with BASIS
    Regards,
    Marasa.

  • DATA LOAD ISSUE /NO ROLL UP MEMORY

    Hello Team,
    I have this master data load failure for FIS_BELNR. The problem which I think that everytime it tries to load it runs out of internal table space in the backend. I really don't know what it means. This data is been failing everyday because of the same problem.
    I have attached all the screen shots and ABAP short dump analysis screen shots as well. One can read in details why is it failing it tells exactly what the problem is , but how to fix it.
    Any more details needed please let me know.
    ABAP runtime errors    TSV_TNEW_BLOCKS_NO_ROLL_MEMORY                 
           Occurred on     25.10.2007 at 02:53:55                                                                               
    >> Short dump has not been completely stored. It is too big.                                                                               
    No roll storage space of length 2097424 available for internal storage.
                                                                                    What happened?                                                                               
    Each transaction requires some main memory space to process           
    application data. If the operating system cannot provide any more     
    space, the transaction is terminated.                                                                               
    What can you do?                                                                               
    Try to find out (e.g. by targetted data selection) whether the        
    transaction will run with less main memory.                                                                               
    If there is a temporary bottleneck, execute the transaction again.    
    If the error persists, ask your system administrator to check the     
    following profile parameters:                                                                               
    o  ztta/roll_area            (1.000.000 - 15.000.000)                 
           Classic roll area per user and internal mode                   
           usual amount of roll area per user and internal mode           
    o  ztta/roll_extension       (10.000.000 - 500.000.000)               
           Amount of memory per user in extended memory (EM)              
    o  abap/heap_area_total      (100.000.000 - 1.500.000.000)            
           Amount of memory (malloc) for all users of an application      
           server. If several background processes are running on         
           one server, temporary bottlenecks may occur.                   
           Of course, the amount of memory (in bytes) must also be        
           available on the machine (main memory or file system swap).    
           Caution:                                                       
           The operating system must be set up so that there is also      
           enough memory for each process. Usually, the maximum address   
           space is too small.                                            
           Ask your hardware manufacturer or your competence center       
           about this.                                                    
           In this case, consult your hardware vendor                     
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)               
           Restriction of memory allocated to the heap with malloc        
           for each dialog process.                                       
    Parameters for background processes:                                                                               
    hat can you do?                                                                               
    ry to find out (e.g. by targetted data selection) whether the         
    ransaction will run with less main memory.                                                                               
    f there is a temporary bottleneck, execute the transaction again.                                                                               
    f the error persists, ask your system administrator to check the      
    ollowing profile parameters:                                                                               
    ztta/roll_area            (1.000.000 - 15.000.000)                  
          Classic roll area per user and internal mode                    
          usual amount of roll area per user and internal mode            
      ztta/roll_extension       (10.000.000 - 500.000.000)                
          Amount of memory per user in extended memory (EM)               
      abap/heap_area_total      (100.000.000 - 1.500.000.000)             
          Amount of memory (malloc) for all users of an application       
          server. If several background processes are running on          
          one server, temporary bottlenecks may occur.                    
          Of course, the amount of memory (in bytes) must also be         
          available on the machine (main memory or file system swap).     
          Caution:                                                        
          The operating system must be set up so that there is also       
          enough memory for each process. Usually, the maximum address    
          space is too small.                                             
          Ask your hardware manufacturer or your competence center        
          about this.                                                     
          In this case, consult your hardware vendor                      
    bap/heap_area_dia:        (10.000.000 - 1.000.000.000)                
          Restriction of memory allocated to the heap with malloc         
          for each dialog process.                                        
    arameters for background processes:                                                                               
    Error analysis                                                                               
    The internal table "IT_62" could not be enlarged further.                
    You attempted to create a block table of length 2097424 for the internal 
    table "IT_62". This happens whenever the OCCURS area of the internal table
    is exceeded. The requested storage space was not available in the roll   
    area.                                                                    
    The amount of memory requested is no longer available.                                                                               
    How to correct the error                                                                               
    Please try to decide by analysis whether this request is                 
    reasonable or whether there is a program error. You should pay           
    particular attention to the internal table entries listed below.                                                                               
    The amount of storage space (in bytes) filled at termination time was:                                                                               
    Roll area...................... 2595024                                  
    Extended memory (EM)........... 2001898416                               
    Assigned memory (HEAP)......... 1886409776                               
    Short area..................... 16639                                    
    Paging area.................... 24576                                    
    Maximum address space.......... "-1"                                                                               
    If the error occurred in a non-modified SAP program, you may be          
    able to find a solution in the SAP note system.                          
    If you have access to the note system yourself, use the following        
    search criteria:                                                                               
    "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"                                        
    "SAPLZ_BW_EXTRACTORS " or "LZ_BW_EXTRACTORSU24 "                        
    "Z_BW_AP_GL_BELNR"                                                      
    If you cannot solve the problem yourself, please send the                
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                             
       To obtain this, select the "Print" function on the current screen.    
    Thanks

    Hello,
    The memory of your internal table wants beyond the system configured threshold.
    Decrease your package size or extend the mentioned parameters (basis task):
    ztta/roll_area (1.000.000 - 15.000.000)
    Classic roll area per user and internal mode
    usual amount of roll area per user and internal mode
    ztta/roll_extension (10.000.000 - 500.000.000)
    Amount of memory per user in extended memory (EM)
    abap/heap_area_total (100.000.000 - 1.500.000.000)
    Regards, Patrick Rieken

  • Master data Load for Substance Creation :  Using BAPI in LSMW  ?

    Hi ,
    Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
    I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
    Appreciate your help and suggestion.
    David

    Thanks John.
    I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
    The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
    With Respect & Regards
    David

  • Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

    Hi,
    Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
    T. Code is:  /SAPCND/GCM
    I need to load data on a file (extracted from 4.6) for service contracts.
    I tried LSMW : for this transaction, recording does not work.
    I am trying loading thru Idocs (LSMW). But that too is note really working.
    Do we require some custom development for this , or is some SAP standard funcntionality available ??
    Can anyone provide some valuable inputs one this.
    Would appreciate your responses.

    Hi Tiest,
    Thanx for responding.
    U r right, our clint is upgrading from 4.6 to ECC.
    So as per the clients requirements, we are maintaining all the configs for Services in CRM.
    Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
    What I am looking os some standard upload program.
    LSMW recording does not work.
    This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
    IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
    But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
    Till now, I am only able to define just one field name and a field value.
    I want this to word for mutliple entries.
    Hope u get my point.
    Thanx

  • Master data load for 0COSTCENTER (Cost Center) failing

    Hi Experts
    I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
    (R) Filter Out New Records with the Same Key
          (G) Starting Processing...
          (R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
    Could you help me on this one please.
    Regards
    Akshay Chonkar

    Thanks All
    I have got the issue resolved
    The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
    So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
    Everything is fine now thanks for your help.
    Regards
    Akshay Chonkar

  • Error in Setting lock for Master Data Load

    Hi Team,
    I encounter the following error while uploading the Masterdata
    "Lock NOT set for: Loading master data attributes
    Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
    I Performed the following steps
    1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
    2) RSATTR->infoobject list-> no infoobject found
    3)Tried after sometime ,but load continue to fail
    Could anyone help to solve the problem
    thanks
    Bala

    Hi Bala,
    Check in SM12 if there are any locks exist with the change run number?
    First check if there are any Master data loads running related to it?
    Check in the Attribute change run screen if there are any change run steps are running?
    Once after checking the above if no locks exist and no master data is running then check the below steps
    1. Run RSA1 transaction
    2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
    3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
    4. Click "Reset Status" button at Run ID 465451241
    NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
    If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
    Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
    It releases all the locks by that change run....and continue with your further work/jobs...
    Regards
    KP

  • Master data loads for Attributes and texts failing

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

  • Master Data Load for New Attribute

    Hi Users,
    We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
    I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
    This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
    When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
    Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
    Please suggest
    Regards
    Zabi

    Hi,
    The situation is:
    Field x from source maps to
    1. field y ( which was existing field ) and also maps to
    2. field z which is the new attribute.
    field y has to get updated for company codes 10 for example.
    field z for company codes 30.
    now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
    So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
    Master Data Load for New Attribute 

Maybe you are looking for

  • Make to order---subcontracting

    Dear Expert, Please help me on below scenario. I raised special sales order through MTO process. After that i run MRP. In this Process, one Subcontracting Process comes throgh Production Planning. I have converted PR to Subcontract PO. The Account as

  • Unable to view recent photos on my Mac in PSE 11 organizer

    unable to view recent photos on my Mac in PSE 11 organizer ..I see them in Iphoto not organizer..Please help

  • BADI - ME_PROCESS_PO_CUST - CHECK Method

    Hi ALL, When I create I'm able to get data of all the line items in the purchase order in the method IF_EX_ME_PROCESS_PO_CUST~CHECK. I need to do validations and change material and material group. I want to call the method like below: Data HS_DETAIL

  • SQL Express 2008 R2 and SQL 2005 Server SP1 in single Windows 2003 server

    Hi, I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database. As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the S

  • Missing "file - save as"

    Hi, when I view a pdf file in a webbrowser (firefox) (both latest versions) I don't have the possibility to save the document like "file -> save as" with using a specific file name or folder. What do I have to do? Thanks a lot.