Lsmw mm02 view selection issue
we have written an lsmw for changing a material costing view .
we want to select only one view .after compliciting the lsmw wwe run it in the
forground mode but the view is not selecting , it is showing the error like "atleast select one view.please tell how to rectify this in lsmw.
Hi,
at the time of recording MM02 select that view which needs to be updated or changed for any value.
Then, Come out of recording and prepare a flat file and put 'X' in the cursor position where you have selected that view.
MAT1 C HALB 'X' and so on..
Try This.
Vikas
Similar Messages
-
Hi,
i was developed on bdc program for MM02. always i was used only <b>Accounting1</b> view only. but this <b>Accounting1</b> view position is changing based on the material no. How to Handle this..?Rai,
YOu have to use material type (You can fins this in MARA-MTART)
call the FM 'SELECTION_VIEWS_FIND' :
select single pstat from t134 into t134-pstat
where mtart = t_mat-mtart.
call function 'SELECTION_VIEWS_FIND'
exporting
bildsequenz = '01'
pflegestatus = t134-pstat
tables
bildtab = t_bildtab
exceptions
call_wrong = 1
empty_selection = 2
others = 3.
Thanks
Ramakrishna -
Views Selection during MM01 MSICHTAUSW-DYTXT + LSMW
Friends,
I am using LSMW to upload material master from legacy system to SAP. I made the LSMW project in one client - SANDBOX and exported the LSMW to Quality Server.
There is some mismatch in Views selection once I select Material and Industry Type. One of the view "Production Resources/Tools" is not appearing.
Would you pl suggest me where exactly I can change the settings in the configuration to make this view appear?
I tried searching the settings for Technical field name MSICHTAUSW-DYTXT for views selection.
This is bit urgent guys. Pl respond back.
Regards,
Rahul Asaicheck oyu setting in tcode OMT3E for both the system and make is same
-
Wrong views Selected when using LSMW + Recording
Hi,
I use LSMW + Recording method to extend warehouse management view, and it works fine in the DEV system, but when the LSME projrct was imported into QA system, the system selected wrong views at the begining when running this LSMW object, the WM 1 and WM 2 view should be selected, but in QA system, instead, only Accounting view is selected, what's the reason? Kindly please advise.
Thanks.The reason is the dynamic on the view selection.
Depending on the already maintained other views (like sales and purchasing and storage location) the position of WM 1+2 changes.
Instead of recording MM01 you should record MMZ1 as this has a static place for WM views.
But even better is to use report RLMG0020. -
Alright, the question I have has to deal with how to link an app to a website to download files. How, or is it even possible to link individual picker view selections to download an individual file from a website or other location such as dropbox using xcode. Sorry if this is the wrong place to post this, but if anyone can help or can send a link to a place that can, I would greatly appreciate it!
I am not getting anywhere with deploying my application or
applet.
I have set up my bc4j project. It contains all my VO info,
links, application module. (proj a)
I then have another project with DbInfo in it(has all my rowset
info), Multiple Frames, and my Applet.java file.
Actually I have an Applet.java file and a Application.java file
because I was seeing if both/either worked. Anyway they seem the
same, except for that extra window that comes up when you run the
applet.
I follow the steps in the oracle directions (from earlier post).
And all seems ok. But at ---->
[*] Select the subdirectory under myhtml where your applet's HTML
file
is located, and enter the directory path of the 'staging'
directory you
created in step 3 above, if different from the default.</li>
[*]Select the HTML files that JDeveloper created to run your
applet.</li>
[*]Select all of the Java source files in your project that make
up the
applet.</li>
I have no HTML file associated with my applet, at least that I
know of.
So do I need to create one, or should it of been done
automatically.
Also, I trying to figure out what will be the best way to deploy
my project. Applet or stand alone application is what my first
choices have been so far. I have read that there is some issues
with applets being served from a different server than the
database. So a stand alone application was my front runner, but
I haven't gotten either way to work yet. -
I am using flex builder 2.01 and have been using datagrids
for a while now. I have recently ran into a weird situation where I
have one datagrid out of three that just will not allow a manual
selection. If I set the index to 0 for instance, the initial view
of the datagrid shows the first item selected. If I go to select a
different item, the first item becomes unselected and no other item
can be selected. If I leave the initial state to be no item
selected, I can never select an item. All other datagrids are
working fine. I have tried to set selectable to true but that
didn't help. This is really odd, any assistance would be greatly
appreciated.Mmmm... Well the good news is I fixed it. The bad news is I
have no clue why it fixed it. This particular datagrid is in a
different tab in a tabnavigator panel. Attached is the expanded
working code. On the line:
<mx:Canvas label="Archived" width="100%" height="100%"
id="ArchiveTab">
I had a click="{GetPropertyArchive()}" to refresh the data on
tab selection. This was old code that was made unnecessary at a
later date but I did not remove the code. My guess is the datagrid
assumed the characteristics of the parent tabnavigator and instead
of ... wait that can't be right. If that was the case then changing
the datasource would not have fixed the select issue because the
'click' definition on the tabnavigator still existed. I would
really like to understand why this mattered so I could avoid this
issue in the future. Any ideas?? -
SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"
Office 365 SharePoint Online can be problematic when it comes to exceeding the list item threshold (e.g. 5,000).
Examples of what happens after exceeding the threshold (e.g. 5,000 items):
You can’t create new forms for the list in SharePoint Designer.
You may have challenges with metadata fields in the forms (e.g. adding metadata values, editing metadata values, deleting the metadata column from the list).
Cannot save the list as a template (i.e. you get the threshold error).
Issue I'd like assistance with: how can I create a custom NewForm in SharePoint Designer
when the list exceeds the threshold limit, given this is Office 365 SharePoint Online and I don't have access to increase that limit?
As a control for my testing, I created another list with just a few custom columns with no list items --it worked fine for that list.
I also tried clearing local AppData cache which didn't solve it. I'd need Central Admin on O365 SharePoint Online to increase the threshold which I don't have access
to do. Errors received in SharePoint Designer:
"Could not save the list changes to the server." After getting this, I tried to work around
the create new forms issue by saving a copy of the original NewForm as NewForm2 and got the root error that I suspected was underlying it all:
“Server error: the attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator”.
Any ideas for how to create a new list form in SD?Thanks Alex.
I just found a couple new workarounds instead of using SharePoint Designer:
Method 1: Add web parts to the form pages on the client side:
Go to the list and execute one of these actions depending what form you want to edit: create a new item (NewForm), edit an item (EditForm), or display an item (DispForm).
With the form you want to edit displayed, go to the gear icon and click "Edit Page".
You should now see the web part page show up with "Add a Web Part" as an option.
Add a Content Editor or Script Editor web part.
Add your custom code to either one to manipulate the HTML objects using your favorite web languages.
Method 2: Use InfoPath 2013.
The InfoPath 2013 route appears to work. -
SHOW ALL / HIDE ALL BUTTONS produce error in chm but not in "View Selected Item"
My SHOW ALL and HIDE ALL buttons work in the View Selected
Item mode. However, the compiled version generates an error tag:
Line: 72
Char: 1
Error: Object expected
Code: 0
URL:
mk:@MSITSTORE:C\Documents%20and%20Settings\glenn_michaels\RoboHelp%206.0\TCA\!SSL!
In short, the the compiled chm is located in the SSL. I tried
adding showhide.js and ehlpDhtm.js to the SSL folder, but that
didn't make a difference. What is missing? How do I fix this?
Many thanks in advance...
glennitoMr. Grainge,
I've tried to follow your instructions to the letter, but I'm
not having any luck.
1) I copied the showhide.js to
a) RoboHelp 6.0 > Project Folder
b) RoboHelp 6.0 > Project Folder > SSL
c) RoboHelp 6.0 > Project Folder > SSL >
MicroSoft_HTML_Help
2) I pasted btnhideall.gif, btnshowall.gif, printerblue.gif
into
a) RoboHelp 6.0 > Project Folder > SSL
b) they are also listed in RoboHelp 6.0 > Project Folder
3)The Project Manager > Baggage File originally displayed
a
a) Project (Name) folder
b) ehelp.xml
c) RoboHHre.Ing
I opened the Baggage File > Project (Name) folder,
selected New Baggage File, and added, respectively:
i. btnhideall.gif
ii. btnshowall.gif
iii. ehlpDhtm.js
iv. printerblue.gif
v. printerred.gif
vi. showhide.js
vii. TCA.fpj
vii. root.fpj
4) I also opened rhbag.apj in Notepad. It shows
a) ehelp.xml and RoboHHRE.Ing accompanied by
<usercreated>false</usercreated> tags
b) the remaining baggage files are accomanied by
<usercreated>true</usercreated> tags
5) Finally, I used Notepad to display two topic files in
which the error message identified a Line: XX. In one case the line
# is 42, in another, 19. In both cases, when I counted lines,
starting with <body>, I ended up on:
onClick="JavaScript:hideEm()"
However, I am none the wiser for my effort and don't know
what (5) might be telling me.
6) The only thing I can think of is that the compiled chm
file is two levels away from the Project Name directory that holds
all the files. The files live in Robohelp 6.0 > Project Name
while the compiled help is found in Robohelp 6.0 > Project Name
> SSL! > MicroSoft_HTML_Help > Project Name.chm.
Should I be adjusting the Relative Path within the topics?
Many thanks for your attention and assistance.
glenn -
"View Selected Item" does not display
I'm using RoboHelp7 out of the Technical Communication Suite.
When I'm working on a topic and select the
View Selected Item button, the topic does not display. When
I first tried yesterday, nothing happened (IE didn't open and there
was nothing in my tray). I contacted Oversea's support and was
informed that there wasn't an incident for this occurance. I was
instructed to uninstall and reinstall RoboHelp.
I uninstalled and reinstalled the applications and the button
still doesn't work; however, this time there is an hourglass for an
instant before not producing any results.
The button doesn't work with anything that I've created or
with the example projects (Clownfish School). Any help would be
greatly appreciated. I'd hate to have to regenerate the project
just to look at a quick change.
Thanks,
MattSounds like I need to add a note to that Snippet. Thanks.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Hi,
I have a Fusion Web Application in Jdeveloper 12C that gets the colors and skinning from a CSS file.
When i add:
af|dvt-hierarchyViewer
background-image: -webkit-linear-gradient(bottom, #FFFFFF 0%, #000000 300%);
background-color: currentColor;
background-attachment: scroll;
to my CSS file and run my application, the Hierarchy opens with a grey colour but then it flashes back to the default light blue gradient of fusionFx-simple-v2.desktop as soon as it tries to fetch data.
But if i change these settings on the Hierarchy itself, the colour changes to the grey and it stays grey.
Any help with this will be appreciated
Stefan du PreezDuplicate Hierarchy Viewer CSS issue
Timo -
Can I unplug my USA apple TV, take it to Austria and will it work in Austria (using a power converter of course)? In other words, will I get USA Apple TV viewing selections? Or, will it work at all?
The ATV is the same device worldwide.
Content is determined by the location where the ATV is physically connected. -
Limiting Query View selections for Web reports
In web reports, users currently have Query View Selection but they want to be able to just see views that they have created and not all others.
How can this be done?
Does creating views in web and in BEX pull different auth objects or is it same? - Which objects are check in WEB views? Bex views use s_rs_comp with the QVW componenet.. but the trace does not show any log like this.Hi,
User specific protection of queries are controlled by authorization object S_RS_COMP1.
Authorization RSZOWNER = "$USER" allows the user access to activities in all the components he is an owner of.
Check out this link, the analyst 3 scenario is what you are looking for:
http://help.sap.com/saphelp_nw04/helpdata/EN/41/05453caff4f703e10000000a114084/content.htm
Regards,
Zaheer -
Query View Selection - Filter by owner
Hi
I'm using BW 3.5 and have the Query View Selection Web Item in my template.
I want to show in this web item only views from the user created them - the current user should only see the views he created and not all.
How is this possible?
Thx
RogerHi Roger,
You can acheive it in authorization object S_RS_COMP1.
Activity: *
Name (ID) of a reporting compo: *
Type of a reporting component: Query View
Owner (Person Responsible) for: $USER$
He will be having access of his view only.
Regards,
Kams -
Hello,
I am working with Bex 3.5 WAD. How do i make use of the web item "query view selection". It is not working properly for me. Is there any document that i can follow to create a web template using the above web item. Please advise.hello Gillian,
I looked at that link before. I am able to use query view selection bex in my web template and the query drop down box is being populated by all the query views created for the query and i have given a table (table_1) as the affected web item. When i publish my template i can see the query view drop down box with the list of query views and the table. When i select one view the table is showing the results for that view, but when second view onwards the data doesn't change? what am i doing wrong. below is my html code.
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="ITEMVIEWDROPDOWN_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_VIEW_DROP_DOWN"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="WIDTH" value="20"/>
<param name="VIEW_DD_TARGET_ITEM" value="DP1_table"/>
<param name="VIEW_DD_RRI" value="X"/>
<param name="VIEW_DD_USE_ALL_QUERY_VIEWS" value="X"/>
<param name="VIEW_DD_DESCRIPTION_I" value="B"/>
ITEM: ITEMVIEWDROPDOWN_1
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="DP1_table"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
ITEM: DP1_table
</object> -
Problem viewing selected iPhoto video event full screen in iMovie.
How do I view selected iPhoto video full screen as an event in iMovie? It always plays the last import instead. I did follow the instructions, but that does not work.
Adrian...
I'm having the same problem!!!! Mine use to sort from new to old and it changed for some reason?
I spoke to apple care and they said it mimics the iphoto order... but it doesn't... I've tried everything, including reversing assending and decending in iphoto.
Like you said, it seems trivial... but it is a pain to scroll to the bottom for everything!
Someone help us
Thanks.
j
Maybe you are looking for
-
How do i transfer my address book from one computer to another
Old computer is XP new compiuter is 7. Mozilla Thunderbird is the email program. Both are installed on separate computers.
-
How do I transfer my Itunes library from my old PC to Mac air? I have tried the migrate download but the old PC not liking it. What other options do I have? I have an ITunes library on both PC and Mac Air and I want it all on the Mac Air.
-
Issue in creating a connection to the target GlassFish Server .
Hi , I am facing issue Creating a connection to the target GlassFish Server. I am using jdevelepor version 11.1.1.4.0. Here i am trying to create an application server connection. But in the Application navigator i couldnt able to lcate the (In the A
-
Hi User needs the list of Vendors with Vendor ID, Business Partner ID and Name.Which tables are to be refered. With Regards Sathya
-
Is it possible to install a Selphy CP900 without an installation CD?
Is it possible to install a Selphy CP900 without an installation CD?