LSMW - No batch input data for screen SAPLMGMM 0060

Hi,
I'm using LSMW to extend the MRP 4view of material master, but when I execute the batch input
session, I got the error message:
"No batch input data for screen SAPLMGMM 0060"
What happened?
Kindly please advise.
Thanks.

Please let me know for all the Material your Plant & Stor Locn is same. If same do like this:
Before Recording Go to MM01 and Click on Views and select all only MRP views and set them as default and mark the option View Selection only on request and save. Then click on Orgn levels Here also do the same thing give Extending Plant & Stor Locn, Reference Plant & Stor locn Default them and Mark the option Orgn/Levels only on Request and save.
So that when you try to create material master it wont ask views / orgn levels.
Now in Flat file remove input Industry Sector, Material Type and Copy from Values and MRP Values and try to upload.
Or Try as Kiran said.
Hope you will understand this process.
Regards,
Ashok

Similar Messages

LSMW : No Batch Input Data For Screen SAPLSD412200

Hi Everyone,
I have executed all required steps in LSMW for Transfering data into a table.
I am thru...with all the steps from recording to Batch Input.
But when I execute Batch Input then its says "No Batch Input Data For Screen SAPLSD412200"
May I Know What I could be missing here.
Appreciate your prompt response and will be awarded if found helpful.
With Kind Regards,
Sudhanshu Garg

Hi
It's not easy to say what's wrong, but it seems the system has called the dynpro 2200 of program SAPLSD41 and you haven't indicate no fields for it in your Batch Input.
U should check why the system forces the call of that dynpro, probably some data you're transfering are wrong or missing.
Max

LSMW "No batch input data for screen SAPMF05A 0302 "

Hi Experts ,
i have error when upload by program "RFBIBL00"
when i user posting key 21 appear error "No batch input data for screen SAPMF05A 0302 "
but when user posting key 25 it will save without error .
is there any relation between posting key and posting by batch input "LSMW"

Hello,
You might be trying to enter data in some field which may have been suppressed in the field status group of posting key 21 or G/L account. Process the session in foreground and see if all fields your are trying to enter are available in the screen.
Thanks,
V V

Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
Regards
Fawaaz

Hi Guys,
Thanks so much for all the prompt responses. My issue is now resolved.
The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
Thanks again.
Regards
Fawaaz

No batch input data for screen SAPMSSY0 0120 error while running LSMW

I created Batch Input Recording for custom check register screen. I completed all the necessary steps but when I process the batch input session, my upload fails and gives me the following error:
No batch input data for screen SAPMSSY0 0120
I ran the Batch input in foreground to see what data am I missing and found out that one of the screen required a "DOUBLE CLICK" as user input and seems that LSMW is not able to process the "DOUBLE CLICK" (even though Batch Input recording captured the "DOUBLE CLICK") to move forward with the transaction.
Does anyone one know How can I overcome this issue or any other workaround.
Thanks Nirankar

Hi Chetan,
List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
Hope this helps, harald

No batch input data for screen MPS00100 2000

While uploading the data in infotypes 1000 and 1001 through LSMW, an error is appearing, which says, " No batch input data for screen MPS00100 2000". Please help as the same LSMW was used to upload the same data in testing clients as well.
Is this an authorization issue??

Hi
Plz chk the SPRO -
>Personnel Management----->Personnel Administration--->Customizing User Interfaces-->Change Screen Modifications
that screen is available
With regards
Vikram.N

No batch input data for screen SAPMV13A 0122

Dear all,
I 'm using the LSMW with program RV14BTCI to import the SD condition records. But, i encounter this error during the upload:
No batch input data for screen SAPMV13A 0122
Anyone experience this nefore??
Regards,
Kit

That means you missed Mandatory fields , you need to fill them first.
Identify the mandatory field in that screen.
KUMNE and KUMZA are mandatory fields.
you map them or Hardocde to some value in the field mapping stage.

No batch input data for screen SAPMF02K 0310 in PROD but ok in DEV & QAS

Hi gurus,
I created an LSMW recording for vendors but now I am having erros when uploading to PROD. The error No batch input data for screen SAPMF02K 0310 appears. The strange thing is that it works perfectly in DEV and QAS.
What would cause this? Would there be a problem with the config?
Edited by: obie villamosa on Sep 9, 2010 7:35 PM

Howdy,
As an example, your recording may work perfectly for a vendor that has not been extended to any purchasing orgs - and so it tests fine in Dev and QAS.
But when you move to Production your recording may fail against a vendor that has been extended to a purchasing org.
Just one example. I notice 0310 is the screen for Vendor purchasing org data, so maybe this is what's happening here.
Cheers
Alex

No batch input data for screen for VF01

Hi All,
Iam trying to to create billing document using BDC for VF01 with sales order. For single line item it is working fine and that to in Mode 'A'. But while creating invoices using multiple sales orders , Iam getting the following error.
No batch input data for screen 'SAPMV60A' '0102' . Error - 0344.
Kindly help me as I was strucked here.
My code .
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KOMFK-VBELN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                  gwa_bdc-vbeln.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    REFRESH messtab[].
    CALL TRANSACTION 'VF01' USING bdcdata
                     OPTIONS FROM wa_options
                     MESSAGES INTO messtab.
Please <removed by moderator> help.
Thanks ,
Srikanth.A
Edited by: Thomas Zloch on Sep 15, 2011 1:47 PM

Hi Jurgen
LOOP AT git_bdc INTO gwa_bdc.
   refresh messtab[].
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KOMFK-VBELN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                  gwa_bdc-vbeln.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    REFRESH messtab[].
    CALL TRANSACTION 'VF01' USING bdcdata
                     OPTIONS FROM wa_options
                     MESSAGES INTO messtab.
Error message population....
REFRESH bdcdata[].
ENDLOOP.
Thanks,
Srikanth.A

No batch input data for screen SAPMSSY3 0131 in Sales order IDOC

I am processing Sales order IDOCS in status 64 using RBDAPP01 .Some of them error out to status 51 with the message -
No batch input data for screen SAPMSSY3 0131 .
I know the standard IDOC inbound process tries to simulate the posting in a BDC like process.
Now, I went to we19 and the screen hangs up in a pop up in the partners tab with partner type 'WE' and my shipto (which is actually filled in the IDOC), missing..upon repeatedly hitting enter, it goes thru and an idoc is posted in status 53. But still unable to get through the root of this issue.
Any, insight will help.

Hi,
I think the pop-up is generated through and user-exit for which recording is missing. This is why your idoc stays in status 64...
Handle the screen recording in the user exit IDOC_INPUT_ORDERS
user exit routine
PERFORM customer_function_dynpro.
FORM CUSTOMER_FUNCTION_DYNPRO.
CALL CUSTOMER-FUNCTION '002'
    EXPORTING DXVBAK   = XVBAK
              DVTCOMAG = VTCOMAG
              DLAST_DYNPRO = LAST_DYNPRO
              DXMESCOD = IDOC_CONTRL-MESCOD
    TABLES    DXBDCDATA = BDCDATA
              DXVBAP    = XVBAP
              DXVBEP    = XVBEP
              DYVBEP    = YVBEP
              DXVBADR   = XVBADR
              DYVBADR   = YVBADR
              DXVBPA    = XVBPA
              DXVBUV    = XVBUV
              DIDOC_DATA = IDOC_DATA
              DXKOMV    = XKOMV
              DXVEKP    = XVEKP
              DYVEKP    = YVEKP
    EXCEPTIONS
              USER_ERROR = 01.
Regards,
Krishnakumar

"no batch input data for screen SAPLMR!M 6220 in BDC while holding Invoice

Hi
     I am facing a problem while uploading Invoice data and to hold the data in miro transaction I am getting the error
     "no batch input data for screen SAPLMR!M 6220 " . It is for non PO data only I am facing this problem using BDC.
     But for Po based Invoice I am getting Invoice number while holding the Invoice. I am Using SHBDB to record the
      transaction   details
    Please give me some solution regrading this.
Samir

Krish ,
            I am doing it in same transaction MIRO for both PO and NON-PO. I am able to generate an Invoice number while holding   the Invoice For NON-PO taking vendor as invoice Party .While I am recording it in SHDB and trying to use the
same in my BDC Programe it is throughing this error and also by testing the program which has been generated by the
SHDB trnasaction i am getting the same Error . Is there any diferrent trnasaction that is used to hold NON_PO invoice ?
Where Invoice number will be generated automatically ?

No batch input data for screen SAPMSSY3 0131

Dear All,
I have developed a report where i need to upload (old and new)incoterms,payment terms,document type and update in the table ekko with my new values (incoterms,payment terms and document type).
Problem :For this report i have uploaded the excel sheet and values are getting uploaded into my internal table.but when using bapi_agreement_maintain to update the ekko table ,in return table its showing No batch input data for screen SAPMSSY3 0131.
Anyone please give the reason/solution to solve the problem.
Regards,
Bhavani.

Hi,
screen SAPMSSY3 0131 is the debugging screen so if you have any break-points in any of the transactions remove the breakpoint and check.
Basically this BAPI is calling a transaction to execute a transaction in no dialog mode so if you have break-points in any of those program you will face this issue.
Regards,
Himanshu

Error: No batch input data for screen SAPMZVKDIALOGDEMO 1000 Help Needed

Hi Experts!
I wrote a program for BDC. I am attaching the code herewith. When i am trying to process the session in SM35, i was getting the error: No batch input data for screen SAPMZVKDIALOGDEMO 1000. Can anyone please tell me, what am i doing wrong.
Thanks.
REPORT zvkbdcdemo01.
DATA: bdc_tab LIKE bdcdata OCCURS 6 WITH HEADER LINE.
DATA: session LIKE apqi-groupid VALUE 'Session #1'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
    client                    = sy-mandt
*   DEST                      = FILLER8
    group                     = session
*   HOLDDATE                  = FILLER8
*   KEEP                      = FILLER1
    user                      = sy-uname
*   RECORD                    = FILLER1
*   PROG                      = SY-CPROG
* IMPORTING
*   QID                       =
* EXCEPTIONS
*   CLIENT_INVALID            = 1
*   DESTINATION_INVALID       = 2
*   GROUP_INVALID             = 3
*   GROUP_IS_LOCKED           = 4
*   HOLDDATE_INVALID          = 5
*   INTERNAL_ERROR            = 6
*   QUEUE_ERROR               = 7
*   RUNNING                   = 8
*   SYSTEM_LOCK_ERROR         = 9
*   USER_INVALID              = 10
*   OTHERS                    = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM fill_bdc_tab.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    tcode                  = 'ZVKTR001'
*   POST_LOCAL             = NOVBLOCAL
*   PRINTING               = NOPRINT
*   SIMUBATCH              = ' '
*   CTUPARAMS              = ' '
TABLES
    dynprotab              = bdc_tab
* EXCEPTIONS
*   INTERNAL_ERROR         = 1
*   NOT_OPEN               = 2
*   QUEUE_ERROR            = 3
*   TCODE_INVALID          = 4
*   PRINTING_INVALID       = 5
*   POSTING_INVALID        = 6
*   OTHERS                 = 7
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
* EXCEPTIONS
*   NOT_OPEN          = 1
*   QUEUE_ERROR       = 2
*   OTHERS            = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form fill_bdc_tab
*       text
FORM fill_bdc_tab.
REFRESH bdc_tab.
PERFORM populate_bdc_tab USING:
'1' 'SAPMZVKDIALOGDEMO' '1000',
' ' 'SFLIGHT-CARRID' 'LH',
' ' 'SFLIGHT-CONNID' '0400',
' ' 'SFLIGHT-FLDATE' '07/07/2007',
' ' 'SFLIGHT-PRICE' '1982',
' ' 'SFLIGHT-CURRENCY' 'EUR',
' ' 'SFLIGHT-PLANETYPE' 'A310-300',
' ' 'BDC_OKCODE' 'CREA'.
ENDFORM.                    "fill_bdc_tab
*&      Form POPULATE_BDC_TAB
*       text
*      -->FLAG       text
*      -->VAR1       text
*      -->VAR2       text
FORM populate_bdc_tab USING flag var1 var2.
CLEAR bdc_tab.
IF flag = '1'.
    bdc_tab-program = var1.
    bdc_tab-dynpro = var2.
    bdc_tab-dynbegin = 'X'.
ELSE.
    bdc_tab-fnam = var1.
    bdc_tab-fval = var2.
ENDIF.
APPEND bdc_tab.
ENDFORM.                    "POPULATE_BDC_TAB

This normally means that you are trying to insert data on a screen for which a particular field is not available.
So check screen number, screen fields and report name. In case of screen fields, use F1, F9 (technical information), and check the name of the screen field for batch processing (all the way at th bottom of the pop-up). This can differ from actual name of the screen field.
If all this is ok, try to create a recording of the transaction with SM37.

FBRA: No batch input data for screen SAPMF05A 0700

Hi Gurus,
I am processing transaction code FBRA on foreground. The document that i am trying to reset involves a foreign currency transations which revaluated periodically.
When I try to reset the document it gives me noteice that "exchange rate differences were posted, clearing document will be reversed. do you want to continue?"
When I press OK, it ask me to enter ther reversal reason "02". Then it gives me an error that "no batch input data for screen SPAMF05A 0700"
Please help me to solve this.
Many thanks!
-JUN-

Dear JUN,
All this is telling you is that there is some piece of information that you are not supplying the batch input session. You can analyse the session in SM35 to see what's missing.
Reward points if it is helpful.
Thanks and Regards,
Naveen.

No batch input data for screen SAPMSSY0 0120

HI All,
I am trying to process an Inbound IDOC via IDOC_INPUT_ORDERS. But when I do this I am getting the following message:
No batch input data for screen SAPMSSY0 0120
And the IDOC goes into error.
When processing the IDOC again via WE19 in foreground, I see a screen which pops up where it states:
<matnr> has Phase out Status, valid from 01.01.2011
the only way to get this screen out of the way is to cancell. But this is not working when I do WE19 in background. Does anybody have an answer on this one?
Best regards,
Guido Koopmann

Hi Raymond,
I checked out your note and see that it's valid for release: SAP_APPL 470 and my version for SAP_APPL is 500 level 19.
The SAP_BASIS version in 640 level 21.
So would be meanig that this note is not valid for me right?
Best regards,
Guido Koopmann

LSMW - No batch input data for screen SAPLMGMM 0060

Similar Messages

Maybe you are looking for