LSMW_Position,Pers area error.

hi Seniors,
I am tring to upload Infotype 0000 through PA40- LSMW. i am independently doing it but i am not an ABAPER.
i have kept the number range internal and maintained the flat file with
PERNR BEGDA ENDDA MASSN MASSG PLANS WERKS PERSG PERSK
I have mentioned the source field properly and tried to go for 14th step Run batch input session,
but to the problem is it is not recording the PLANS WERKS PERSG PERSK.
I have done the recording properly.
What could be the possible reason for this,waiting for your valuable response.
Edited by: srssaphr09 on Mar 6, 2011 7:38 PM

Please share some more information about the various steps you have made in LSMW because this information is needed to solve your problem.
First guess is that these fields are not really part of infotyp 0000 and they are not recorded for that reason. I assume you should upload both 0000 and 0001 to get these fields available.
Kind regards
Linda

Similar Messages

Name EE Grp EE SGrp Per Area & Cost Center tab disappered from PA 30 Screen

Hi Guru,
I have created the shift schedule for new company code and then moved it dev (No chng) for testing and hired an new employe on same company with new shift schedule. And as soon as execute PA 30 screen to see the master data emp namd , EE grp , EE sgrp , pers area an cost center tab has disappeared.
Please tel me wht went wrong or wht wil be possible cause for this error.
Rgds
Subrat

Here it is, sorry for the delay, I kinda gave up for a while:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP5"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "PreferredMode" "1920x1080"
EndSection
Section "Monitor"
Identifier "0-DFP10"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "3600 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "PreferredMode" "1920x1080"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "PreferredMode" "1680x1050"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP5" "0-DFP5"
Option "Monitor-DFP10" "0-DFP10"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 5520 1920
Depth 24
EndSubSection
EndSection
Last edited by xeekei (2013-09-12 22:47:09)

I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

Try pulling the battery for 10 minutes and putting it back in. Try pressing and holding the power button for a while 15-30 seconds to see if it will respond. Did anything happen to it, drop, submersion, etc. Was it functioning before you charged, When did it last work. Are you sure it charged up and the charger is working.

I tried upgrading to MountaIN lION HOWEVER i WASNT ABLE TO Install. I then tried reinstallling Snow leopard but once again it will not let me install stating there are errors on the disc. I have run disc repair on disc utility but it wont allow me

I was told to reinstall Snow leopard which I did . More troubles! It then came up cannot iinstall as there are errors. Tried going into disc utilities and repair but once again it stated iin red I cannot proceed. can anyone help me here. Before this was happening my system was slowing right down with the beach ball making an apearance after tapping the mouse or typing text.

So you are trying to reinstall Snow Leopard?
In order to do that, you need to erase your hard drive - you cannot go back to an earlier system without erasing. Make sure you back up your files first. Then insert the Snow Leopard install disk, and restart while holding down the C key. If that does not work, insert the install disk, go to System Preferences > Startup Disk and highlight the install disk > click on restart.
Once you are booted into the install disk, go past the language selection and then to Utilities in the menu bar. Use Disk Utility to repair the drive (just in case), erase it and then install. After that, eject the disk and update to the latest 10.6.8.

There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox.

There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox in windows. how can I solve this problem? if I use destop player like windows media player, no such error.
would you please give some solution for this error? thanks!

OS is window10, Metro APP is Xbox or MultiMedia 8; any video format will occur error only by following steps:
a. Put Audio / Media / Photo files into USB thumb disk or Micro SD card.
b. Connect USB thumb disk / Micro SD Card to Platform.
c. Open 'File Explorer', click USB thumb disk.
d. Open audio file with metro app: Music. / Open Media file with metro app: Video./Open Photo file with metro app.

Staging area error and universal installer does not run

Everything was ok. I installed Oracle 9i r 2, AS 9.0.2, iFS 9.0.2.
Then I uninstall AS and iFS. But AS folder remains there (with inventory,contentsXML.. folder inside), even if I deleted it, when I tried to install AS again I get the error staging area error, and the folder appears again.
Another thing is that in oracle universal installer the installed and deinstall products options do not do anything. I only can select the install option
Did I do something wrong during the AS uninstall?
What Can I do now?
Thanks for your help,

Try looking here:
http://www.thomasfly.com/Oranux/#Step-by-step
follow these steps/configs and the install will go quite nice!

IDVD5 and Power Calibration Area Error

In an effort to burn a Maxell DVD-R from iDVD, I receive the following error message just as the burn process completes:
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
1) I visited the Apple Store and the genius ordered and installed a new dvd burner
2) The new burner has the exact same error
3) I've search around the internet and realize that I'm not alone. Aparently many have seen iDVD show this error with one unusual means to fix the error. One fix was to burn the image to an external drive and then use the disk utility to burn the dvd. Apparently the issues seemed to be iDVD.
4) I've burned many DVDs with the same project to the same brand of DVD-R in the exact same manor that I tried here.
5) I have iDVD 5.0.1, a new Powerbook 15", and OS X 10.4.2.

I still have the same problem with iDVD 5, Toast 7 Platinum, DVDSP, and even recording my project into a .img file and using Disk Utility, so I don't think the problem is related to a particular app, but to Mac OS X, and not even a hardware or media problem as I've previously used this brand to burn like 50 DVDs without problems (Verbatim DVD-R) and in two days I've had like 15 coasters with this project with both Verbatim and Samsung DVD-Rs.
Here is the error log:
iDVD: Burn started, Fri Dec 30 20:38:24 2005
iDVD: Burning to DVD-R media with DAO strategy in PIONEER DVD-RW DVR-104 X227 via ATAPI.
iDVD: Requested burn speed was 1x, actual burn speed is 1x.
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Write (10), block: 768, count: 64 -> 3/0C/00 Medium Error, Write error
iDVD: Burn failed, Fri Dec 30 20:39:56 2005
iDVD: Burn sense: 3/0C/00 Medium Error, Write error
iDVD: Burn error: 0x8002006E The burn failed because of a medium write error.

Error Code When Burning (Power calibration area error. (0x73, 0x03.)

I've been searching for answers to my problem and it seems like this problem has randomly popped up for many others like it has for me.
A month ago I randomly started getting this error code Power calibration area error. (0x73, 0x03.) when I tried to burn dvds in DVD Studio Pro. When I try to burn a DVD just from the finder options I get this error Code (Error code 0x8002006D)
But CD's burn fine for me.
I have been using the exact same discs that were able to burn before. They are 16x speed Memorex.
I tried relaunching the finder. I bought a Disc Cleaner today and i bought some 8x speed DVD's. I cleaned the Burner and I was able to successfully burn a 8x cd but still not the 16x.
Does anyone know the cause of this error code? Why would it just randomly happen?

Hi:
Check this thread:
http://discussions.apple.com/thread.jspa?threadID=1054119
You can use this link ** Media Brand vs. Manufatrurer Brand ** to learn about your media quality.
Hope that helps !
Alberto

Power calibration area error. (0x73, 0x03.) for my DVD burner

My dvd drive was working just fine then the other day I went to burn a dvd using idvd studio pro (like I always do) and it started burning, then about 2 minutes into the burn I got an error message stating that the burn failed due to a "Power calibration area error. (0x73, 0x03.)" then th disk just spit out of the drive. I dont know what this is or how to fix it. can anyone help??

Welcome to the discussions!
Usually this pops up when your drive does not like the disk itself. Try either a different blank or a different brand disk.
I use only TDK and Fuji disks and I have never received that error and never burned a bad disk either.

Every time I convert a CVI project to Visual C++(6.0) project, there are errors: easyio.fp, fieldpoint.fp,niimaq.fp

Every time I convert a CVI project to Visual C++(6.0) project, there are errors:
Wizard was unable to locate the following function panel modules referenced by your project: easyio.fp
Wizard was unable to locate the following function panel modules referenced by your project: fieldpoint.fp, niimaq.fp
what's the problem?

Every time I convert a CVI project to Visual C++(6.0) project, there are errors:
Wizard was unable to locate the following function panel modules referenced by your project: easyio.fp
Wizard was unable to locate the following function panel modules referenced by your project: fieldpoint.fp, niimaq.fp
what's the problem?

Report of total invoice per area

Dear Experts,
I am trying to make a report using query generator. The report is total invoice per area but I am still failed. here is the query I made:
elect distinct OTER.descript,
'invoice per teritory' = (select distinct sum(a.DocTotal) from oinv a inner join ocrd b on b.cardcode = a.CardCode where a.CardCode = OINV.CardCode and b.County = OCRD.County group by b.County) from INV1 inner join OINV on OINV.DocEntry =
INV1.DocEntry
INNER JOIN OCRD on OCRD.CardCode=OINV.CardCode
     LEFT JOIN OTER on OTER.territryID=OCRD.Territory
where OINV.DocDate between '01/01/2010' and '01/28/2010'
The result is as follows:
Area A     47533700.000222
Area A     53663149.964662
Area B     772500.000010
Area B     6705000.000072
Area C     7890000.901213
It is not expected.
I am using query generator is :
Area A     101196850
Area B     7477500
Area C     7890000.901213
but my query still give unexpected result. Please advice. Thanks a lot.
steve

Thx Gordon.
This thread is closed. I also find out the answer i.e.
select distinct OTER.descript,
'invoice per teritory' = (select distinct sum(a.DocTotal) from oinv a inner join OCRD b on b.CardCode = a.CardCode where
b.Territory = OTER.territryID group by b.Territory) from OINV
INNER JOIN OCRD on OCRD.CardCode=OINV.CardCode
     LEFT JOIN OTER on OTER.territryID=OCRD.Territory
where OINV.DocDate between '01/01/2010' and '01/28/2010'
group by OTER.descript, OTER.territryID
The result is similar with your query result.
Steve.

FB50: Functional Area error

Hello Gurus-
We created a template using FB50 for our JE Revenue Expense with functional area. When we go to input something, changing amount, we get a Functional Area error F5394 is not permitted for account NNNNNN.
The only way we can get it to post is if we clear out the functional area. When this is done, the same functional area is posted?
Why is this happening?
Thanks!

Thank you Laks-
But these notes are irrelevant. We are on ECC 6.0.
After much time on this, the problem is when the user saves the account assignment via FB50. When the cost center is entered and saved. The functional area is automatically populated. Next time they access that variant, because the functional area is there, we get the error. The user then has to clear the functional area only for SAP to input back?
Is there a way around this? I've never seen this at any of my last projects.
Thank you!

Power calibration area error (0x73, 0x03.) ??? HELP!

At the beginning of iDVD writing the lead-in on a burn, I am encountering “errors were found during the burning process”.
The explanation is- “The recording device reported the media error: Power calibration area error. (0x73, 0x03.)”
Then I get a second window that reads- “MULTIPLEXER ERROR - There was a problem during multiplexing/burning.”
Can anyone answer this problem?

Hi Jeff
Power Calibration area error in iDVD
Try:
- Clening lens with a Cleaning CD/DVD
- Change brand of DVD disks to eg: Verbatim DVD-R (I use this with good result)
1. Make a disk image in iDVD then use this and
2. burn with Apple Disk util tool or if You have Roxio Toast™ AND
3. at an as slow speed as possibly eg: x1 or x2 or x4
or as Sue writes: Improve performances
iMovie: Tips to improve performance
http://docs.info.apple.com/article.html?artnum=93699
Yours Bengt W

Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca

Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 77 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.8E774FP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Errore irreversibile durante l'installazione.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2710)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2726)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2728)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2734)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2736)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2738)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2740)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2742)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2746)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2748)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2750)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2752)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2754)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2756)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2770)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2784)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2790)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2792)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2794)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2796)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2798)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2800)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2802)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2804)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2818)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2820)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2822)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2826)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2836)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2838)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2840)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2842)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2844)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2846)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2848)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2854)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2864)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2866)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2870)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2892)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2894)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2896)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2928)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2938)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2958)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2980)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2998)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3018)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3020)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3022)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3024)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3026)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3028)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3066)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3072)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3074)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3084)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3094)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3118)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3156)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3158)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3160)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3162)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3164)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3166)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3168)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3172)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3174)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3176)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3186)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3196)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3198)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3214)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed

发自我的 iPhone
在 2013年10月14日，6:46，dell 2713 <[email protected]> 写道：
Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca
created by dell 2713 in Downloading, Installing, Setting Up - View the full discussion
Exit Code: 6

PPOME ,pers no,EE group,EE subgroup,pers area not appear in Basic data tab?

Hi Friends,
                    I am new to SAP HR. I am trying to assign a person for a position in tcode PPOME. After that I could not see Pers No,Name,EE group,EE subgroup,Pers area details are not appear in Basic data tab. But for other persons which are all exist already in system ,I can see pers no,name,EE group,EE subgroup,pers area details. Could you advice what will be the issue?. Thnak you.
Regards,
Hock Teck..

Hi Rajesh / Thomaselsy,
                                    Thanks for your response. Pls see my below output,
             1.    Plogi Orga value is 'X'.
            2.I create person in PA with pers area ,ee group,ee sub group details and i can see all these details in PA0001 table. I did not create pers area, ee group ,ee subgroup for position ids. I wanted to see those pers area,ee group,ee subgroup detail, from pa0001, in PPOME under basic data tab.
           3.Whether I assign position id to a person in PA40 or assign a person in PPOME to a newly created position id,in both cases I can see details are updated in both PA0001 and HRP1001 tables correctly.
          4.I also tried to assing a position id to a person in PA40 and then through PPOME i tried to assign new position id for that same person. Then I can see new position id got replaced in PA40 properly.
          But when I double click on person in PPOME, I could not see pers no,name ,ee group,ee subgroup,pers area under basic data tab..Pls let me know how to proceed further..
Regards,
Hock Teck.

LSMW_Position,Pers area error.

Similar Messages

Maybe you are looking for