LSMW Problem

I want to add start stocks with 561 movement via MB1C transaction. When I do it manually it is ok. But when I want to do this in LSMW batch input session. I give an popup screen with titled "Account Assigment Block". But I didn't see this popup in the executing manually?
Whats happen? Thank you

> When you click on the button to process the session
> you will get a popup with a few check boxes.
>
> can you check the simulate background mode check box
> in the additional functions section and check if the
> problem still exists ?
No When I execute it simulate background mode it is ok. Thank you

Similar Messages

  • Vendor Master Data LSMW problem

    Hi,
    I have vendor master data in XLS file. Created project in LSMW with standard batch input object 004 (Vendor Master Data), Method (0001 standard) and Program name RFBIKR00.
    Other constant data:
    BLF00-TCODE = 'XK01'
    BLF00-LIFNR = 'FOX1220' ... 'FOX1221' etc
    BLF00-BUKRS = '3800'
    BLF00-EKORG = '2000'
    BLF00-KTOKK = "LIEF'
    other all data like (Bank detail, purchasing data, accounting data, dunning data) are coming from that single XLS file.
    Problem while creating Batch Input Session: <b>"Vendor FOX1221: data retention at plant level not allowed"</b>
    Why??? Reading and converting data is fine.. but still problem terminates the BDC.
    Please help me out
    Thanks,
    Chetan Shah

    Hey it is solved, just making WERKR (Data retaintion at Plant Level) = 'X'
    Thanks,
    Chetan Shah

  • LSMW problem with Partner functions in Customer Master

    Hi All,
    Requirement is to load the Customer Master Data using LSMW.
    Loading General data is ok, But when I am planning to load the
    partner function using the recording method in LSMW, How do I upload
    more than '1' Ship to party partners and more than '1'
    Bill to party partners using LSMW.
    Normally in table control there is a "+" button at the end of the
    table control which when pressed enters one line in table control,In
    Partner function screen , there is no such button available, so how
    can I determine which line am I supposed to enter data using LSMW.
    One partner can have multiple no of BP and SH partners like more than 10
    of both types. How do I upload these partner functions in SAP using LSMW?
    Regards,
    Ajay

    That a customer master has several business partners is just usual, a customer can have as well several company codes and sales areas. So where exactly is the problem?
    Most problems come with recordings, recordings should be the last option, not the first.
    What import method do you use?

  • LSMW problem (Specify files)

    Hi Friends
    I try to specify file in LSMW (from local PC).
    <b>Legacy Data          On the PC (Frontend)</b>
    When I save this step I get error like "No Logical Path Specified".
    What should I do to correct this problem. Please help me.
    Thanks in advance.
    Hari

    Srikanth thanks.
    When I check logical path & file for converted data, those fields are mandatory fields. There is now value assigned, so I get this error. Now I assign logical path & file which already defined in system.
    For the lofical path, when I check in FILE transaction it has physical path as /usr/sap/DEV/SYS/global/<FILENAME>.
    But when I assign this logical path in LSMW (converted data)..I get error message like "Logical path does not point to physical directory"
    What should I do in this case.
    Please explain me.
    Thanks
    Bala

  • LSMW Problem RFBIBL00: No acct no.was transferred in field BBSEG-NEWKO

    Hello everyone,
    I am creating a LSMW to transfer Financial documents.
    I used object 0100 (financial documents), method 0000 which uses program RFBIBL00.
    I maintained Field Mapping and Conversion Rules, where I added an account for the next item line in the BBSEG structure. Later, when I display converted data the field BBSEG-NEWKO is filled with the value 506410!!!
    But when I finally start the Dirct Input Program I get an error:  Document 1 record 2 : No acct no.was transferred in field BBSEG-NEWKO.
    Does anyone have an answer to solve my problem?
    Thanks a lot!
    Best regards,
    Patrick

    Dear Patrick,
    I have the same exact issue, and rather than opening a new thread, I thought I'd first ask you to clarify this a bit for me.
    I am also using BSCHL in the BBTAX structure, as I see no other place where I can pass the posting key.
    I also have to use BBSEG-NEWBS for the next posting key, as well as BBSEG-NEWKO for the next account number.
    At the last line item of a document, I put "/" in the fields NEWKO and NEWBS, hoping that the program will take that as a hint to finish the posting.
    Instead, the error I get is the same: FB145, saying "No acct no.was transferred in field BBSEG-NEWKO".
    You said the problem was that you've used both BSCHL and NEWBS. Could you please tell me the correct way of using these fields? I have to use them, since I'm posting with PKs 15 and 05, and I must specify this somewhere...
    Kind regards,
    Srdjan
    P.S. If admins/mods think I should open a new thread, then I will do so, just let me know. Since the problem is the same, I thought it would be OK to post here.

  • LSMW problem with classification RCCLBI03

    Hello
    I have created and LSMW object for classification
    of material, define the files
    but while trying to read a file a have a following
    information about file *.lsmw.read
    File *.lsmw.read cound not be open for written
    (file is defined on server...)
    Does somebody have idea about a problem
    Thank you very much.
    Bogusia

    Hello,
    There are 2 possibilities for the cause of this error:
    1. You do not have necessary permissions to save the READ file in the relevant folder.
    2. File name may be very long. Make it short in Specify Files Step.
    I hope you have given proper file related data in Specify Files step.
    A short File name in file for Read Data.
    A short File name in file for Convert Data.
    If you see Logical path you can give 'LSMW' (Normally this is tha path name given) and the same file name in the 'Logical File'.
    Hope this helps you.
    Best Regards, Murugesh AS

  • LSMW problem during display converted data

    Dear Expert,
    We have problem in LSMW during display converted data.
    When using display converted data, the output will show many of rows based on data content.
    For example, contains 6 rows. But when we want to see details of the data for one row (example row 2) by double clicking on it, the problem occurs, the output will show the details of the data from the last row (row 6).
    Please your advice.
    Thanks and Regards

    Hi,
    There seems to be sorting issue. Do you have dependency on data while executing the script?
    how about reading the data , is it getting uploaded correctly?
    Regards

  • LSMW problem (KP06)

    Hi SAP,
    I have created LSMW to upload budget (Txn: KP06). But when i upload the budget i received error message "Field BDC03(12) does not exist in the screen SAPLKPP20110". I am using ECC6 now. There's no problem when i upload the budget in 4.6C before. I just want to know what is the error message means for?
    For your info, it stucked at field WKF (eg: January, February, etc.) when i upload the budget in period screen (KP06). Please help me. I will give points for those who helps me out this problem.
    TQ
    Regards,
    Nazrul

    Hello,
    To do integrated excel upload of cost center plan data.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Manual Planning User Defined Layouts - Create your own layout or copy from standard layout and change it.
    IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Define User Defined Planner Profiles
    Copy the SAPALL to ZSAPALL. You cannot change SAPALL as it is standard.
    In ZSAPALL planner profile, select proper planning area and enter your layout.
    Tick Integrate Excel.
    Once the popup for KP06 comes, you need enter the data and save it. It would generate the file name.
    With the same file name you need upload the plan data by using KP06.
    In KP06
    Extras ==> Excel Planning ==> Upload
    Select the file as prepared in accordance with format at the time of generating the file name.
    Hope this solves your problem.
    Regards,
    Ravi

  • LSMW problem since upgrade to ECC

    Not sure if this is posted in the correct place, so apologies in advance if it is...
    We have an LSMW object which uploads customer master data onto the system (account group 0005).  This has works for years, but we have since upgraded to ECC and now the partner function part does not seem to be working.
    We load up a PE partner function and a number to go into RF02D-KTONR.  This gets picked up correctly from the file into the position screen 2324 but it then doesn't get put into the field on screen 324.  This just gets left as 0 so when the batch input session is run they all error with the Message No. F2613 Number '0' is not defined.
    I have searched on OSS notes but I can't seem to find anything, does anyone have any ideas?
    Kind Regards
    Carly

    I logged this problem with OSS and there was a combination of things that we did to make this work...and we are not really sure what change actually helped the situation.
    We ran progam RFBIDEG0
    We also changed config in the following:
    IMG >> SD >> Basic Function >> Partner Determination >>
    Setup Partner Determination >> Customer Master >>
    Account Groups - Function Assignment
    adding PE & 0005 as we were having problems with prospects customers...
    I'm not 100% sure what else was done as OSS were logged onto our system for a while trying to solve the issue...
    Hope this helps
    Regards
    Carly

  • Cremas in LSMW(problem it is showing

    hi friends,
    i am going to get IDOC-LSMW, this sort of work on LSMW.i am doing this one first time. i have taken MESSAGE type : CREMAS, AND BASIC TYPE: CREMAS01, because i want to populate file data,(vendor details )which is equivalent of XK01 into to idocs.
    In step 13.start idoc generation,
    "no partner exist with the name.",type"<b></b>
    i think problem with partner profile. Will you suggest me regarding this.
    suppose if you have any document  FOR lsmw-idoc with a example ,please send to my id:
    [email protected]
    Thanks in advance.
    T.Balaji.

    Thank you John for your Advice.To download this one we need to have login and password which cannot be created by us.
    http://service.sap.com/lsmw.
    understand problem.
    if you have any material particularly IDOC-BAPI-LSMW.
    PLEASE SEND THAT MY ID.
    [email protected]
    balaji.

  • LSMW:problem While reading Data

    Hi Experts,
    I have specified one field length as 180 of type CHAR  of one field called Name in the maintain source field step.But the problem is while  reading the data characters upto lenght 60 are  coming.rest are getting truncated(i mean after 60 till 180).i mean after 60 rest it is showing blank.What exactly can be the problem?i am not able to sort it out.
    Is there any limit to the length of a particular field that we specify?
    Any pointers will be highly appreciated.
    Regards,
    Rahul
    Edited by: Rahul Kumar Sinha on Feb 11, 2009 10:05 AM

    if your passing the text up to 180 chars but target filed is only 60 char length, so that ist taking only 60 chars.  put the break point on the text filed in step5(Maintain Field Mapping and Conversion Rules) and check...

  • LSMW - Problem with copied and edited Project - missing new field

    I have copied an LSMW project to a new Project to load a Journal Entry to FI - Transaction Code FB01.  I added a new field VALUT (value date) to both the Maintain Source Fields and Maintain Field Mapping Steps.  The data with the new field shows up in Display Read Data, but it does not show up in Display Converted Data.  This new field is the last field in the csv file, i added it to the end of the Source fields.
    I think perhaps i need to create a new Batch Input Session, because when i run the Start Direct Input Program, one of the messages that comes up refers back to the original project name - not my renamed Project. --> "Session Name OLD PROJECT NAME was opened"
    (The steps available on my screen do not include a "Create Batch Input Session" step, as some of the posted answers show)
    Thank you for your help.

    Hi Sandra, Thank you for your reply.  I am not sure what you mean by restart.  if you mean go through all the steps- yes, i went through all the steps again. I also exited out of the LSMW screen completely and went back in to my project and redid the read and convert data again, just to be sure, but i am still missing the new field in display converted data. 
    The only change i made to the Project was to change the name of the Project, subproject, and object and to add a field to the Source Fields and Field Mapping - for field mapping i used the default rule of Transfer(move)and my source and code seems to be correct - in that i followed the example of all the other fields.  i also changed the name of the file where my new csv file was located, but i did not change the names of the read and converted data files. Perhaps i need to change something else? It seems to me that it is still using the instructions from the old project to convert the data.  Thanks again.

  • Lsmw problem: for mm01 basic data text two language

    Dear,
    I want to realize, in mm01, under 'basic data text' tab, have English and French text.
    I use lsmw, direct input,object:0020, method:0000, program name:RMDATIND.
    The basic data text function should be done in structure BMMH7.
    Now, I add some codes for BMMH7 after entering 'Display Conversion Program'. But the codes will be covered when the rules changed.
    Could you please tell me how to do the same function in 'Maintain Field Mapping and Conversion Rules'?

    Look at the codes I added in conversion program:
    form convert_transaction.
      check so_tcntr.
      loop at ZMATERIAL.
        perform convert_0001.                                   " BGR00
        perform convert_0002.                                   " BMM00
        perform convert_0003.                                   " BMMH1
        perform convert_0004.                                   " BMMH2
        perform convert_0005.                                   " BMMH3
        perform convert_0006.                                   " BMMH4
        perform convert_0007.                                   " BMMH5
        perform convert_0008.                                   " BMMH6
        perform convert_0009.                                   " BMMH7
    * Add start by SAPGD003
        perform convert_0011.                                   " BMMH7
    * Add end by SAPGD003
        perform convert_0010.                                   " BMMH8
      ENDLOOP.
    * End of transaction
      transfer_transaction.
    endform.                    "convert_transaction
    form convert_0009.                                          " BMMH7
      check g_skip_transaction = no.
      g_skip_record = no.
      g_record = 'BMMH7'.
    * --- __BEGIN_OF_RECORD__
      BMMH7 = INIT_BMMH7.
    * --- BMMH7-STYPE
      BMMH7-STYPE = '8'.
    * --- BMMH7-TDID
      BMMH7-TDID = 'GRUN'.
    * --- BMMH7-TDSPRAS
    * Add start by SAPGD003
      BMMH7-TDSPRAS = 'F'.
    * Add end by SAPGD003
    * --- BMMH7-TDFORMAT
      BMMH7-TDFORMAT = '*'.
    * --- BMMH7-TDLINE
    * Add start by SAPGD003
      BMMH7-TDLINE = zmaterial-TEXTE_CMD_FR .
    * Add end by SAPGD003
    * --- BMMH7-TDSPRASISO
    * Add start by SAPGD003
      BMMH7-TDSPRASISO = 'FR'.
    * Add end by SAPGD003
    * --- __END_OF_RECORD__
      transfer_record.
      g_skip_record = no.
    endform.                    "convert_0009
    form convert_0011.                                          " BMMH7
      check g_skip_transaction = no.
      g_skip_record = no.
      g_record = 'BMMH7'.
    * --- __BEGIN_OF_RECORD__
      BMMH7 = INIT_BMMH7.
    * --- BMMH7-STYPE
      BMMH7-STYPE = '8'.
    * --- BMMH7-TDID
      BMMH7-TDID = 'GRUN'.
    * --- BMMH7-TDSPRAS
      BMMH7-TDSPRAS = 'E'.
    * --- BMMH7-TDFORMAT
      BMMH7-TDFORMAT = '*'.
    * --- BMMH7-TDLINE
      BMMH7-TDLINE = zmaterial-TEXTE_CMD_EN .
    * --- BMMH7-TDSPRASISO
      BMMH7-TDSPRASISO = 'EN'.
    * --- __END_OF_RECORD__
      transfer_record.
      g_skip_record = no.
    endform.                    "convert_0011

  • LSMW - Problem while assigning the quantity field to the target structure

    Hi,
    Here I am getting the warning while I am maintaing the field mapping and conversion rules .  Here I am doing this through the Batch input Recording.
    That is , while I am assigning the source field to the target structre field .
    " <b>WARNING : Source field is longer than target field</b> "
    plz help me to remove that warning.
    Thank you

    in lsmw  use char field instead quantity of same length(in stucture defined in lsmw).

  • LSMW Problem - Urgent

    Hi Guys,
    After I run LSMW 13 steps..A session is created in SM35. When I process this session, LSMW is working fine in the foreground state. But when I run LSMW in background , It showing all the records as errors and the session is not processed.
    The error is like " Field xyz is not a input field ".
    Basically what I am doing is I have 3 fields namely x , y and z. I am concatenating all the 3 fields x + y + z into a non-editable field xyz and storing in a table.
    Is LSMW in background doesn't work if the fields are in disable mode ??

    PA30 ( HR Master data )
    In this transaction we have done screen enhancement and added few fields.
    Eg:- countrycode, areacode and Telephonenumber which are editable fields. Once user enters data in these 3 fields and press ENTER ..it will do concatenation of these 3 fields and displayed in an TELNR which is in disable mode.
    This TELNR is also saved in PA0006(Even though it is in disable mode).
    When I run LSMW in foreground..It is stopping at this point and saying that "FIELD TELNR is not a input field". After pressing SAVE the entire data is saved in PA0006.
    But this is not working in background.

Maybe you are looking for