LSMW procedure for PP master data

Hi
i have some doubts regarding LSMW .... can we upload PP master data BOM,Resource,MasterRecipe and Production versios through LSMW. could u pls guide me in this issue.
Regards
hgvd

Hgvd,
You will create the procedures. I have never seen detailed procedures published for all possible LSMW scenarios, probably because, they are always different for each project..
Every Data requirement is different, based upon the business requirements. The LSMW project concept is pretty intuitive, so even without much training, a novice can create data upload functionality. Read the docs previously quoted in this thread, and if you want more detail, try the old online word doc at
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000455036&_SCENARIO=01100035870000000112&_OBJECT=011000358700000728862003E
Although this doc is for an old version of LSMW, it is particularly useful for a novice, since it contains so much detail. There is some added functionality is later versions of LSMW, but for the objects you have mentioned, this doc should suffice.
Best Regards,
DB49

Similar Messages

Reg:Approval procedure for Employee Master Data

Hi,
My client wants approval procedure for Employee master data.
Is it a way do this?
Please let me know.

Hi,
On Which action, do you required approval on Employee Master data ??
It may be through customization easily.
Regards
Rahul Singh

Reg lsmw for customer master data transfer

Hello All,
I want to know while transfering data by lsmw for customer master data .
Scenario : There are more then one ship-to-party and bill to party so how to upload the data in this case?????
Thanks,
Sunny

hi
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
<b>step by step procedure with screen shots</b>
regards
vijay
<b>plz dont forget to reward points if helpful</b>

How to use LSMW on CRM for bulk master data creation?

Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
Rohit

Hi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat

LSMW for Material master data

Hi,
Anybody can help me, how to make LSMW for Material master data.
Thanks in Advance
Arjun

pls follow the thread:
http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm
regards,
indranil

New SAP Tools for faster Master Data Upload?

Hi All!
I am interested in getting some detailed information on different tools that are used for faster master data upload. Please let me know about the tools apart from LSMW, BAPI, eCATT and BDC.
We basically want to know the following things:
1.Which are the tools available for this master data upload?
for eg. SAP MDM, Info Shuttle, other available new age tools etc........
2. Their performance / feature comparions?
Please provide performance / feature comparison for different new age tools in detail.
Thanking you in advance.
Regards,

Hi Amar,
regarding SAP MDM you can read advantages and characteristics here: http://www.sap.com/platform/netweaver/components/mdm/index.epx
Hope this help you,
Vito

For uploading master data

hi
for uploading master data (ex: customerd data) into sap, which methods we prefer
(call transaction/ session/ LSMW) . why?

depends on how much data you want to upload..
LSMW itself will give you multiple options to load data.
if there is a huge number of records that you want to upload, do not go for a call transaction method, rather use sessions method if you want to use BDCs. explore in LSMW that which options are available for customer data while uploading it.

For uploading master data(ex:customer data) into sap,

hi
for uploading master data(ex:customer data) into sap,
which methods you prefer? call
transaction/session/lsmw/bapi? why?
Thanks
Rama

Hello,
Check this:
COde:
REPORT zprataptable2
       NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
        i1 TYPE i,
        lifnr LIKE   rf02k-lifnr,
        bukrs LIKE   rf02k-bukrs,
        ekorg LIKE   rf02k-ekorg,
        ktokk LIKE   rf02k-ktokk,
        anred LIKE lfa1-anred,
        name1 LIKE lfa1-name1,
        sortl LIKE lfa1-sortl,
        land1 LIKE lfa1-land1,
        akont LIKE lfb1-akont,
        fdgrv LIKE lfb1-fdgrv,
         waers LIKE lfm1-waers,
        END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
        j1 TYPE i,
        banks LIKE lfbk-banks,
        bankl LIKE lfbk-bankl,
        bankn LIKE lfbk-bankn,
         END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = 'C:\first1.txt'
      filetype = 'DAT'
    TABLES
      data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                      = 'C:\second.txt'
     filetype                      = 'DAT'
    TABLES
      data_tab                      = jtab.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RF02K-LIFNR'
                                  itab-lifnr.
    PERFORM bdc_field       USING 'RF02K-BUKRS'
                                  itab-bukrs.
    PERFORM bdc_field       USING 'RF02K-EKORG'
                                   itab-ekorg.
    PERFORM bdc_field       USING 'RF02K-KTOKK'
                                   itab-ktokk.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFA1-ANRED'
                                  itab-anred.
    PERFORM bdc_field       USING 'LFA1-NAME1'
                                  itab-name1.
    PERFORM bdc_field       USING 'LFA1-SORTL'
                                  itab-sortl.
    PERFORM bdc_field       USING 'LFA1-LAND1'
                                  itab-land1.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    cnt = 0.
    LOOP AT jtab WHERE j1 = itab-i1.
      cnt = cnt + 1.
      CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-banks.
      CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
      PERFORM bdc_field USING fdt jtab-bankl.
      CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
      PERFORM bdc_field   USING fdt jtab-bankn.
      IF cnt = 5.
        cnt = 0.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKS(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=P+'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKN(02)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
      ENDIF.
    ENDLOOP.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-FDGRV'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFB1-AKONT'
                                  itab-akont.
    PERFORM bdc_field       USING 'LFB1-FDGRV'
                                  itab-fdgrv.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0220'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0310'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'LFM1-WAERS'
                                  itab-waers.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0320'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=YES'.
    PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1     63190      0001     0001     0001     mr     bal188     b     in     31000     a1     inr
2     63191      0001     0001     0001     mr     bal189     b     in     31000     a1     inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Vasanth

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the tables used for ACR & Master data daemon job?

Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
Praveen

Hi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath

Data Sources for the Master data of FI-CO,MM and SD from R3

Hi Gurus ,
Could you please tell me what are the main datasources of FI-CO,MM and SD needed from R/3 for the master data to be loaded in new implementation of BI .
Could you please guide me step by step .
thanks in advance ,
Pratham

Hi
It varies from Client and project. But the Most common SD & MM are from LO **** pit.
help.sap.com is the best source for this
Hope it helps

Change Message Control for Customer Master data

Hi Friends,
I have to choose/populate a message when the user is about to create an already existing customer.
In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
OK...
When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
Now .....
I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
I want to have the same message with message types 'E','E', and 'I' respectively.......
How is this possible (or) what should i do to meet my requirement :-|
Expecting ur answers
Thanks in advance ........
Cheers,
R.Kripa.

Hey yes it is not possible (as of now
I ve met the requirement by just using message statement in the program itself ............
My requirement is met but still if anyone knows about this do answer / reply
Thanks
Cheers,
R.Kripa.

Match code for Vendor Master Data on PAN

Hi
Vendor match code will work only if the name are identical. But for the same vendor, user create multiple vendors.
For Ex: If the vendor name is ABC Private Limited, User puts different names like ABC Pvt Ltd, ABC P Ltd, etc.
Hence the match code check is over ridden.
For that reason, i want check on the basis of PAN number.
There is no field for PAN number in match codes field.
Please suggest how it can be maintained

Hi ,
Use the exit SAPMF02K , which is specially ment for vendor master data .
Cheers ,
Dewang

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Queries for Vendor Master Data

Hello,
Does anyone know if there is any standard queries for vendor master data?
Thanks ans best regards
Maria Stone

Nothing standard. You can easily get it though. In the infoprovider right click and insert your characteristic as a Data target. Once done you can then create queries on you characteristice vendor.
pls assign points to say thanks.

LSMW procedure for PP master data

Similar Messages

Maybe you are looking for