LSMW - Read Data not showing in Converted Data

Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PM

HI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem

Similar Messages

Iphone 4 Calendar date not showing the write date

I just upgraded to the ios 5.1.1 from 4.2.1. I have a Iphone 4. After the upgrade, my iphone's Calendar date is not showing the right date. in order for the right date to show, I either have to re-start my iphone or I have to go into settings/general/date&time and turn off the set automatically off than on in order for it to show the right date. I didn't have this problem before the upgrade. I hope someone can help?

I had a similar problem and then found that my calendar was not set for the right date and year. Check that first.

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

LOV does not show newly added data in the same session

Hi guys,
I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
LOV shows newly added data correctly.
Is there a way to show the newly added data in the same session without logging out? Please help.
Regards !
Sameera.

Add the following method in your ViewRowImpl base class:
public void refreshLOVAccessorQueries() {
    List lovs = getViewDef().getListBindingDefs();
     if (lovs != null) {
         for (Object obj : lovs) {
            getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
             ListBindingDef lbd = (ListBindingDef)obj;
Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
    <executables>
<invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
   </executables>

Creating Aggregate--Master data not showing:

In a Cube, following this instruction I get the table below:
Goto rsa1>Infocube>manage>select the Infocube>Click contents>select tab "field selection for output">selectall>execute>execute.
CustID CustID MatNo MatNo SalesRepID SalesRepID SalesRegion SalesRegion SalesOff SalesOff
cust001 -
2mat001---2 -srep0120--
0
cust002 -
3mat002---3 -srep0230--
0
cust002 -
3mat003---4 -srep0230--
0
cust003 -
4mat003---4 -srep0340--
0
cust004 -
5mat004---5 -srep0450--
0
cust004 -
5mat005---6 -srep0450--
0
I have already verified and both Sales Region and Sales Office have the master data but browsing the cube gives the above figure, showing Sales Region and Sales Office as blank in the first column and 0 in the second.
The master data for all these characteristics are already active
a) What can I do to fill the Sales Region and Sales Office columns, because that may be the solution to this problem in b) below
b) I have added three infoobjects to a new aggregate that I have created. Any reason why for Sales Rep, Sales Region and Sales Office, maintaining master indicates that they all have master data; and each of these InfoObjects has been activated, but while creating the aggregate, attempts to assign Fixed Value to each of these IOs works only for Sales Rep. i.e. only Sales Rep showed the master data. Why are the other two IOs not showing their master data?
What do I need to do to see the master data of these 2 infoobjects in the Aggregate maintenance screen, just like the Sales Rep infoobject?

<u>What I did based on your advice:</u>
Thanks for the hints, it looks like we are up to something.
Under the InfoSource tree, I selected the InfoSource on which the Cube is based. Under this InfoSource, I selected Communication Structure, right-click on blank space in InfoObject column, then selected Choose Possible entries, then selected Sales Office, and later used the option Choose in the context menu to populate the row with the details. Same was repeated for the Sales Region.
Under the Transfer Structure/Transfer Rules, the same process was used to insert the Sales Office and Sales Region in the Transfer Structure and Transfer rules tabs. i.e. the field to InfoObject mapping was maintained in the transfer rules.
There was a RED X, but after I selected Propose Transfer Rules, the RED X went away.
<u>Result of above active:</u>
I thought I was good to go but still on checking at the Aggregate Maintenance options, the values for these two Infoobjects were not available.
Now back to the Cube: Under the Cube, on the InfoSource beneath it, I right click and choose Update Transfer Rules but got a message that
due to changes in other objects, this update rule was set to inactive
Do you want to reactivate?
I chose Yes but got an error:
IC=IC_D IS=IS_D error when checking the update rules
It is basically stopping me from reactivating the Update Rules, so what is the work around up to this point?

0IC_C03 Data Not Showing in Report

Dear Friends,
We are using SAP BW 3.5. I have a problem with 0IC_C03 Cube.
Problem is:
Data is transfered to BW i can see the data from Cube --> Contents.
But when i create a report i am unable to see only that particaluar data which dont
have storage location.
Can anybody help me why its not showing that specific data which dont
have storage location.
and on other hand we can see the data from Cube -->Contents
Regards,
malik

Yes i am taking care of marker.
all data is ok excep 13 records which have no storage location.
and only these 13 records are not showing in the report and thats why
my stock is not tele with R/3.
Any other hint.
regrds,
Malik

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

SAP Fiori Purchase Requirision data not show

Hi Team,
SAP Fiori Purchase Requirision all configuration i have done.
I am creating Purchase Requirision using t-code me51n. and then that purchase Requirision came in Work Flow properly.
but from Browser http//<IP Address>:<Port> /sap/bc/ui5_ui5/sap/ui5_mm_pr_apv/index.html?backToHome=true data not display.
i have configure proper TS/Task Type id to scenario. but Still data did not showed.
Below is Work Flow Screen
Browser data not showed.
Regards
Pankaj Kamble
Tags edited by: Michael Appleby

hi Guys
please guide me
@masayuki : - i used above link and created New launchpad but still data not showed .
i run link http://<IP>:<portNo>/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/?$filter=key%20eq%20%27PR_APPROVAL%27
and getting below error message.
<feed xmlns="http://www.w3.org/2005/Atom" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xml:base="http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/">
<script id="tinyhippos-injected"/>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/
</id>
<title type="text">ScenarioCollection</title>
<updated>2014-07-03T10:45:25Z</updated>
<author>
<name/>
</author>
<link href="ScenarioCollection/" rel="self" title="ScenarioCollection"/>
<entry>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</id>
<title type="text">
ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</title>
<updated>2014-07-03T10:45:25Z</updated>
<category term="taskprocessing.Scenario" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme"/>
<link href="ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')" rel="self" title="Scenario"/>
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
<d:SAP__Origin>SCHANDECCDEV1</d:SAP__Origin>
<d:key>PR_APPROVAL</d:key>
<d:number>0</d:number>
<d:title>PR_APPROVAL</d:title>
<d:targetParams/>
</m:properties>
</content>
</entry>
</feed>
Regards
Pankaj Kamble

Filter row data to Show Last Hour data

Hi ALL
I need to apply filter on Row Group in report based on last hour data from current hour .
I'm using;
=Datepart("h",dateadd("H",-1,now))
On Row Group
but it does not show any row.
but When i used ;
=Datepart("h","2013-12-20 01:00:00")
It Works ..
Kindly help me how can i filter row data to Show Last Hour data.
Thanks

Thos works fine for me
=Datepart(DateInterval.Hour,DATEAdd(DateInterval.Hour,-1,Now()))
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

External hard drive seagate 3.0 cant read and not showing in disk management.

Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU..

Hi,
Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
Karen Hu
TechNet Community Support

My compatible ebook reader is not showing in ADE

I have downloaded epub books from the library onto a windows laptop ADE.
I connected my ebook reader to the computer before opening ADE but it does not show in the library
I have ADE authorization but cannot transfer my library books as the ebook reader is not showing.
I have previously transferred onto the same ebook reader but I have had to do a restore on the laptop and then delete my previous authorization and re-authorize.

I have had something the same, it's now sorted. I don't know what I did but I now have my book on my reader. Perhaps someone out there could tell us what to do as I am sure this is going to happen again. I tend to just go at it without knowing what I'm about but it works for me. I know that is not satisfactory but I have no skills in the technology field! Good luck - to us both!

Data Not Available. Statspack data is not available for this database insta

Hi,
while trying to configure the 9i db on grid control I installed the statspack data while configuring it. But now when I try to see the historical data as part of the performace tab for the 9i db it complains as below
Data Not Available. Statspack data is not available for this database instance. Make sure that Statspack is installed on the target instance.
Please shed some of your inputs.
thanks in advance
PK

Hi,
I think it is not installed.
Using 1097660794 for database Id
Using 1 for instance number
, stats$database_instance di
ERROR at line 9:
ORA-00942: table or view does not exist
I did exactly as it said while configuring the db. but seems like something is wrong. Can you please advise me on how can I install it in commandline.
Thanks
PK

W520 Smart Card reader does not show up in Device Manager

W520 Smart Card reader does not show up in Device Manager.
It was working before and now nothing. Nothing happens when SD card plugges in.
Could my smart card reader stop working or is this a configuration issue?
Any thoughts?
thanks
Ian

Hi Ian,
Welcome to the community, and thanks for the post.
The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
After that check if the issue get resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

Data not showing up on report

Hi
I have an Infocube that has data (ready for reporting) loaded from APO Livecache.
I'm running a BEX report that gets data from that cube, and for some reason the value for one Key figure is not showing up.
It's there in the infocube, but is not showing up on the report. The column for that key figure is just blank.
What can I check or do to see the value there?
Thanks!
Pooja

Hi
There are no restrictions or conditions on the KF and it is running on a single Infocube.
There are non-zero values in the cube.
The field level authorizations are also fine...
we used to be able to see the values when we last ran this report 2 weeks back.
There's a calculated key figure that is a sum of this key figure that's not showing up and another one. It is showing the aggregate value correctly! Eg:
KF not showing up: Production Planned
2nd KF : On Hand Stock
Calculated KF Ending Inventory = Production Planned + On Hand Stock
Although Production Planned is not showing up in the report, I checked its value in the cube and the Ending Inventory value is summed correctly in the report.

LSMW - Read Data not showing in Converted Data

Similar Messages

Maybe you are looking for