Lsmw-recipe

dear PP gurus,
i want to upload Master Recipe throuhg LSMW.
i have created template with Header and One Operation with one phase, now the template is having all the source field related to standard value for six parameters.
But while uploading it is not taking value for this parameter.
please guide.
thanks in advance
kailash N. thakkar

HI Kailash,
Tri it by doing below changes.
Go to CRC2 ---> Select resource and Plant and then go to Basic data screen.
Now For All those 6 activities (which you have maintain in SVK) and set rule for Maintenance as No checking.
Then try to upload the recipe.
Regards,
Dhaval

Similar Messages

In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

Hi All,
I am unable to find which method suits for Master Recipe Creation in LSMW.
Please send me in detail if any method suits.
Can any body help me in this.
Points will be awarded for correct answer which helps me come out of this problem.
Regards,
Shobha

Hi shobha,
if there is code u have to do before uploading go for BDC or BAPI,
it not go for LSMW (recording method) --> in this its very difficult to code.
Thanks

List recipe (tx. c201) in lsmw using recording method

Hi.
I'm trying to upload master data for recipe list (tx c201), and I'm not so sure which method I should use, i tried with an standard object but it works with idocs and i supposed to configure a lot of stuffs (ibounds, ports, etc), and using recording... how can i handle controls tables when the number of items it's variable?.
Reading through the sdn i realized that it's good to work with two files, one with master data and the second one with detail or item data. Actually i used that method to upload data in lsmw but using a standard direct input program and works pretty good..., but using a recording I don't know how to handle this.
Thanks in advance,
Regards.
Albio.-
Message was edited by: Albio Vivas
Message was edited by: Albio Vivas

Get your test data from functional folks then do the recording based on that. After done with the recording you may delete the existing values(which are used for recording). This is because, for example say you are having the data in an EXCEL sheet and for a particular customer one of the fields is empty. In this case, the DB will be updated with the value provided in the recording.

Master Recipe by LSMW

Hello gurus,
Is it possible to use the LSMW for Master Recipe (TCODE c201) data migration? If so, is there a document or a web site which can guide me? Please help

Hi,
Unfortunately, i could not found any LSMW for master recipes.
What I have done past is in LSMW create a screen recording of C201 and use the LSMW structure to do the rest (the mapping, conversions, etc). This work very well. It may take a few recordings to get all the data loaded (one for the operation/phases, one for the material assignment, etc) but it will work.
Or you can try with BDC For master recipe both in creation and change mode.
hope you will find this useful !!
Pradeep

LSMW FOR MASTER RECIPE

Hello
Iu2019m working in lsmw master recipe "standard" by using object "0170" and method : batch input "0001"
when i want to create the structure I don't find same zone like "PVZNR" "PHFLG"...
Please note that i have master recipe contained more than 25 operations and 25 phase it's hard to created manually.
is there an easy solution to load MR by lsmw.
i will be thankful if you help me
Foued

HI Foeud,
Please post your question here:
ABAP Connectivity
Best Regards,
Ravi

Mass creation of BOM and Master Recipe for Plants

My client wants to do Mass BOM creation and Mass Master Recipe Creation from a Generic BOM and Generic Master Recipe for all 10 Plants by just a click of button.
He does not want to use copy function using CSO1 or C201, and do for plants 'one by one'. He finds it very time-consuming. He wants to copy for all ten plants all at once. Please advice how this can be accomplished in the best possible manner, and if by standard SAP.
Thanks,
Sac

Dear Sir ,
What is LSMW ?
I want to Copy some bill of material from another plant .I had used T code CS01 for it but only the header bill of material is copied .
The copy field in CS01 is only for first level boms the subsequent Boms are not copied .
so is there any other way to do it ? if possible please give the detail procedure .
Regards
Pankaj .
Edited by: pankaj.001 on Mar 9, 2011 10:55 AM

Request for detailed acts to upload Work center, BOM, Routing data in LSMW

Hello PP ANgels,
Request for detailed actions to upload Work center/Resource, BOM, Routing/Recipe data in LSMW.
Thanks in advance

Sanjay,
In the forum I found that you had used some "drops", that require a password to view.
In these forums, the only links I post are public (help.sap.com) and from SAP support (service.sap.com/support). SAP Support is mostly available only to customers and partners of SAP. If you meet these criteria, and need a login for the SAP support site, contact the license administrator for your company's SAP licence (this is usually a Basis person). If you cannot locate this person in your company, contact Service Marketplace directly (service.sap.com/mp). Alternatively you can contact your local SAP Sales office and speak to your account administrator.
Maybe it would be a better idea to group all standard solutions in one place.
I expect it will be so...in Nirvana. Here, life still entails suffering.
With respect to your detailed questions, I would have a hard time answering, I have never used recordings in LSMW to create work centers, I always use standard batch/direct input. I suspect that the VGEXX items are the units of measure from CRHD, I suspect LARXX items are activities from CSSL, and I couldn't comment on FORXX items without doing some research.
This is the SCM PP forum. You might get more answers posting this in the ERP PP forum SAP ERP Manufacturing - Production Planning (SAP PP) , since work centers/routings/recipes/BOMs are more or less irrelevant in SCM.
Sorry I couldn't be of more assistance.
Best Regards,
DB49

Deleting operations in master recipe of process orders

Dear Guru's,
I want to delete the operations in master recipe of process orders. The operation numbers are different in different process orders. This activity has to be performed on bit large number of process orders. Can anyone help me in providing the process for doing this activity in mass. Any suggestions?
Thanks in advance.
Regards
Kalyan

Dear Kalyan,
Why do you want to delete the operations(basically phases)at process order level?
If it's really required to execute the Shop floor activties and if the order numbers is huge in number means then in my
understanding only a LSMW/BDC can help you,but technically I'm concerned about selecting the operation/phases for deletion
by passing on the confirmation number or operation number for a particular process order.
If it would be the latest operation/phase for a product means then make the changes in the master recipe so that the same is
getting copied into the process orders in the future.
Check and correct me if I'm wrong.
Regards
Mangalraj.S

Warning on LSMW upload

hi all
during upload the change recipe through LSMW project ,getting warning message that "recipe group xxxx save with warning" and then save the recipe. but when i change the recipe manually,in same way, system not give any warning.
where is the problem?
lots regards

Dear,
Did you upload Master recipe and master inspection plan throuh LSMW then may possible you get such wranning message? I don't think it will create any problem if master recipe saved.
Or you can try with BDC
Regards,
R.Brahmankar

Material Assignment in Master recipe

Hi,
Is there any FM/BAPI to assign material into a master recipe? Currently, we are using BDC to call C202 transaction for this purpose. This process takes long time for material assignment which leads to performance issue.
Thanks in advance
Senthil Kumar A

In LSMW , object BUS1012 is offered for routing creation and change .
Unfortunately there is no object for master recipe creation & change and there is no standard batch input, nor BAPI/IDOC, nor direct input. You should create your own batch input or CATT.
Here is a possible procedure:
Please record a Batch-Input with transaction SHDB and try if this work. If not please try with TOFF as described in the notes.
Read carefully SAP note 142022.

Problem during lsmw - bdc

HI,
There is reqirment from client to change the aternate bom text in mass.
Now problem is using lsmw or bdc value is not getting change during recording. this problem is specific to this field stext (alternate bom text) only.
BOM's were created using maste recipe, so i had tried to change the bom using master recipe, here data is change succefully using lsmw but problem is inactive bom's, because inactive bom's can not be change using c202.
Any input regarding above issue
Regards,
Dhaval

I just did a quick recording to see if I could change the Alt.Text in BOM header & I was able to.
Below is the values of recording (only partial i.e. from the time I was in header screen & when I clicked Alt. Text). Please ensure you click on Alternative Long Text during your recording & then enter at least 2 lines of text as that is one of the pre-requisite. You can ask your abaper to compare the below with your recording to see if is the same & incorporate the below in your BDC program. It should work fine.
SAPLCSDI     2110     X
BDC_OKCODE     =LTKO
                                                            BDC_SUBSCR     SAPLCSDI                                0800STLKOPF
                                                            BDC_CURSOR     RC29K-EXSTL
                                                            BDC_SUBSCR     SAPLCSDI                                1110SUBPAGE
                                                            RC29K-STKTX     'Test value which I stored first'
                                                            RC29K-BMENG     1
                                                            RC29K-STLST     1
SAPLSTXX     1100     X
BDC_CURSOR     RSTXT-TXLINE(03)
                                                            BDC_OKCODE     =EDNP
                                                            RSTXT-TXLINE(02)     'Test value which I changed during rec'
RSTXT-TXLINE(03) 'This is second line of text'
SAPLSTXX     1100     X
BDC_CURSOR     RSTXT-TXLINE(04)
                                                            BDC_OKCODE     =TXBA

LSMW for Work center text

Hi Experts,
Im developing LSMW to upload the Work center text(TCode CA10).
I did tried on Direct input -> program /SAPDMC/SAP_LSMW_IMPORT_TEXTS in LSMW. The uploading process was done successfully but it can not be used in Master Recipe assignment(TCode C202). Reason due to the direct input program doesn't has Work center short text. FYI, the Work center short text is entered during the Work center text creation via CA10 first screen.
And i did tried on CA10 manually, work center text only can be used in TCode C202 when it is created with short text key in at CA10 first screen. While for the Work center text that created without short text key in, system will prompt error when i try to assign the Work center text into C202.
Thus, i may need you advice. In LSMW other that direct input,is there any BAPI or IDOC available for the Work center text upload?
Please comment.
Thanks in advance.

Hi SKK,
Thanks for you reply.
I did tried on FM SUBMISSION_PROCESSING, and found:
It is being trigger online, whereby i need to key in the text manually.
Since my requirement is mass upload, hence that is impossible for me to execute the FM to key in the text manually.
Do you know there is any other FM/BAPI/IDOC that can perform the Work center Short and Long text in background mode?
Please comment.

Want to upload recipe master tcode c201

Hello Friends,
I want to upload recipe master tcode c201, can any one suggest which method will be useful for it ie BAPI or bdc or lsmw.
Pls let me knw is there any bapi available for this purpose
Regards,
Sunny

Hi
we have two BAPI's but i think these are not to upload the data into c201
BAPI_CONTROL_RECIPE_GET_LIST Read Control Recipe List
BAPI_CONTROL_RECIPE_REQUEST Request and Transfer Control Recipes
but it is better to go for BDc or LSMW.
Regards
Pavan

Loading Dependent formula into Recipes

I wrote a LSMW to create Recipe Headers in RMWB.
SAP along with the header automatically creates a Dependent formula.
I would like to know if there is a function module/ BAPI i can use to load Items (input/outputs ) into this dependent formulae.
I have tried BAPI_FORMULA_CHANGEMULTIPLE (but it only works with independent formule)
FRML301 Function pool. None of them seem to work. Or am I doing something wrong here?
I can't use SHDB to laod formula data (which is how I loaded the headers).
Please help.

Hello,
I have encountered this issue as well and here is how I receommend you deal with it. Unfortunately, DRM does not understand multiple lines in a formula and so it truncates the other lines.
1. The best way around it is to ensure that your formula does not have multiple lines. Strip all the enters and only use spaces. Essbase does not care about aesthetics as long as the formula is all in one line. This should take care of it.
2. Sometimes, the formulas for member properties are very long and they are in multiple lines. You can try using excel formulas to bring them all in one line. After removing enters and tabs myself multiple times, I informed my Essbase developers of this DRM issue and told them to provide me with the formulas without using Enters and tabs.
Hope this helps.
-- Adi

How to load Master Recipe into SAP

Hi SAP gurus,
Can somebody give some inputs on how to load Master recipe from legacy to SAP.
Do I have to use LSMW or eCATT? If LSMW, can i use Routing Direct Input method or Do I have to use Recording.
How will the source structure look like?
What all fields I should maintain in these structures?
How many data load files I should Maintain? What is there format?
I would really appreciate if some can give step by step procedure for either LSMW or eCATT.
Thanks in advance
Kole

We never store master data in InfoCube.
refer How to Implement Flexible Master Data Staging:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412
Edited by: sam hennry on Feb 23, 2008 3:18 PM

Lsmw-recipe

Similar Messages

Maybe you are looking for