LSMW Recording Help

When we run the transaction FB01 for Customer Document DA, the whole transaction goes smooth without asking for any CO object like profit center and gets saved.  But when we do LSMW recording of the same transaction code FB01 and every information same, when we are done with entering the second line item (Posting Key 50 - G/L migration acct 111111), and amount,  a window pops up asking for a profit center. THough it is not a Cost element, why are we getting prompted to enter a profit center. THis only pops up when doing LSMW recording. Ither wise when we are running this transaction , it does not ask for a profit center. Please help. It is very urgent. we are doing the LSMW recording for migrating customer open balances.
Thnxs
Lakshmi

Alex,
The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv  as   Project_Subproject_Object.lsmw.conv
System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
Just rename the file such that it is with in the 45 charcter limit....you will be fine
Hope this helps
Vinodh Balakrishnan

Similar Messages

  • Re: Dynamic Action is not triggering in LSMW Recording

    Hello All,
    In SAP HRMS personnel actions if i do using LSMW Recording it is not triggering  the dynamic actions.
    Is there any mechanism to Trigger dynamic action in LSMW Recording ?
    How to find the differences in process with and with out recording ?
    Small help is also highly appreciated.
    With Regards,
    Sunil,
    +91-9903695384.

    Yes. Do one  thing. First study the dynamic action. Try to understand what the dynamic action is doing. Is it creating data in other infotype or is it updating some other table. Once it is clear what the dynamic action is doing then you can try to implement the same logic in LSMW. In LSMW there is a provision to add more than one recording and this recording can be called based on some logic..
    Thanks & Regards,
    Sandip

  • How to handle the pop-up Screen in LSMW - Recording

    Hi,
       I am doing the LSMW-Recording for Pricing Conditions.there are so many condition types are there.
    my problem is while uploading the data from flat file,if record alredy exists in SAP system, it will display one Pop up screen,  says "the record already exists do you want to overlap it".so that time it has to hit enter and has to overlap the existing records.
    can any one please help me..this is very urget to me.
    Points will be awarded for correct response.
    Thanks,
    Shobha

    Hi,
    Go to Maintain Field Mapping and Conversion Rules
    Insert coding at __BEGIN_OF_PROCESSING.
    Like:
    Select .....
    if sy-subrc = 0. "Record found
      skip_record.
    endif.

  • LSMW Recording method is not working for transaction code FBL5N

    Hi Experts,
    I am trying to prepare LSMW to create dispute cases for customer line items through LSMW Recording method. When i was trying to do through SHDB Recording its working properly through Program. But its not working through LSMW Recording method means its not executing to next screen, immediately its displaying session completed screen.
    Please do let me know any soution for this.
    thanks,
    Sriram.

    Hi Sriram,
    If my memory serves me correctly, a BDC will not work correctly with a list. This is mentioned somewhere in the SAP help pages.
    Now I am not familiar on how to create dispute cases but using FBL5N does not sound to me the way to go.  I assume that you use FBL5N in order to determine to which documents to link the dispute to, however you should be able to get the requested info from the BSID/BSAD tables.
    Also in case you want to change the customer line item in the accounting document, check the data transfer workbench (SXDA) as SAP delivers a standard program for this.
    Kind regards,
    Robert
    Edited by: RJ. Schamhart on Jan 14, 2011 12:35 AM
    Edited by: RJ. Schamhart on Jan 14, 2011 12:43 AM

  • LSMW recording for different numbers of materials

    Dear all,
    In the LSMW recording-trcode at VBO1- I enter material codes. But the number of  material codes are changeble. For instance for a customer I can enter 5 material codes; for another customer I can enter 12 material codes. For this reason,
    I created recording template for 15 materials.
    When I run the LSMW it gives errror. because I entered 3 material for a spesific customer. It wants other 12 material codes.
    As result;
    How can I create a template for various numbers of materials?
    For example
    customer1 I want to run LSMW for  3 materials
    customer2 I want to run LSMW for  5 materials.
    Thanks

    Hi
    I am not exactly sure of the problem, but you have 15 material columns refering to the line items possible in ALL sales orders/contracts.  Ensure that you have a ZERO in the colomns not being posted to.  The zero in Excel has to set to text I think, but check the SDN for further on that matter.  When you save as a text file, or CSV file, open it with wordpad.  You should see the 0 there, if not search SDN.
    Something else you can do is the have the field names that become you source field in the LSMW.  See Maintain source fields in the LSMW.  Use the field names that you have given there as the excel file's header line.  i.e.  line 'A'.  When you select your file to be loaded under 'specify fields', tick the box : - Field names at start of file.
    It will then only take the amounts that are there and not put the amount in the next place.  I am not sure with recording in SD, but record the item numbers from a static 10,20,30,40,50 .....ETC TO 150.  Then have source fields for all 15 line items.
    You could have another material created as a non-valuated material and so it won't post anywhere.  Add this material where necessary.
    Hope this is of help
    Kind regards
    Dawn

  • LSMW- Recording : Multiple Line Items

    I am trying to create an LSMW recording that simulates transaction O3I7.
    The thing is that we have different line items. This is similar to a sales order where we have header details and items details.
    I created a recording. Then I created two structures. One header Structure and one Item structure. I define the specific header fields under the header structure and the item fields under the item structure.
    However LSMW gives me an error. Because in LSMW each recording is considered as one target structure. I can't have more source structures than Target structures. Since I have One recording LSMW gives me an error.
    I tried to create two recordings but this does not work since LSMW will read each one as a different transaction.
    Does anyone know how to create LSMW recording with multiple line items so he/she can help?
    Thx

    Hi,
    Not sure about the transaction that you have mentioned. However, in LSMW recording, you can load the items along with the header in 2 steps using 2 data files.
    Step1: Create the header along with the first line item. Here you use a file which contains the header data along with the first line item data.
    Step2. Add subsequent line items to the header. In this case you need to enter the transaction in change mode. The data file may contain items data only. Please be sure to have an identifier at header level to add the items in that specific document.
    Hope this helps.
    Best Regards, Murugesh

  • Error Useing with LSMW recording Maintenace Plan Schesule period update

    Hi Experts,
    I have one quary i am using Lsmw recording methode to update schedule period of around 4000 ,aintenamce plans, i created Lsmw but it is reading when i want batch input session Overview time i get following message. please help me
    "LEAVE TO TRANSACTION" 1 is not allowed in batch input
    Message no. 00352
    Diagnosis
    The specified system functionality cannot be used in batch input mode.
    Procedure
    Change your application so that it can be used in batch input mode.
    Thanks and Regards,
    Raj

    Hi,
    It seems thereis a problem with the recording.
    Please try to create a fresh trecording and the excel file which you are using check it also.
    regards
    Amit Parkhi

  • LSMW (recording)  for  Z - Tcode

    Hi experts,
    Is it possible to do LSMW(recording type)   with  Z   T-code... or not...
    Thanksin advance,
    Anthyodaya.

    Hi,
    Yes it is possible to do recording for ZTCODE,
    In the first step of the LSMW when you select
    the radio button - Batch Input Recording then by
    giving a Zname for your recording then entering
    it will again ask for the recording name and the
    TCODE name there you can specify your ZTCODE name.
    Hope it helps
    Regards
    Mansi

  • MB1C LSMW Recording fails with missing Prod Date for Batch Managed Material

    An LSMW recording for transaction MB1C that was batch managed was successfully recorded.  This included the entry of the Production Date before pressing enter to post the Good Receipts.  However, when the transaction was executed, the error came back, "Enter the date of production".  In looking at the screen in the lsmw batch results, it shows the date in the production date field.
    I also tried to create the recording in the Transaction Recorder (trancode SHDB), and process the recording simulating the background mode and got the same results.
    Any ideas why it seems to be ignoring the production date?  Any help will be greatly appreciated.

    An LSMW recording for transaction MB1C that was batch managed was successfully recorded.  This included the entry of the Production Date before pressing enter to post the Good Receipts.  However, when the transaction was executed, the error came back, "Enter the date of production".  In looking at the screen in the lsmw batch results, it shows the date in the production date field.
    I also tried to create the recording in the Transaction Recorder (trancode SHDB), and process the recording simulating the background mode and got the same results.
    Any ideas why it seems to be ignoring the production date?  Any help will be greatly appreciated.

  • Lsmw recording does not read Scroll down

    Hi expers.
    This is not MM RElated question but there are more experts here..You may help us
    WE have mass data to introduce by VK11.WE want to use LSMW recording.
    But the problem;
    We input condition type,then we have to select key combination.But we have to scroll down to click key combination.And lsmw does not read sroll down and select the first key combination instead of ours.
    İs the any solution to solve tihis problem..
    Thanks in advance..

    Your BDC in lsmw will look something like this...
                                                  T   VK11     BS AA X   F
    SAPMV13A     0100     X                                                                               
    BDC_CURSOR      RV13A-KSCHL
                                                      BDC_OKCODE      =ANTA
                                                      RV13A-KSCHL      ZCON
    SAPLV14A     0100        X                                                                               
    BDC_CURSOR           RV130-SELKZ(03)
                                                      BDC_OKCODE       =WEIT
                                                      RV130-SELKZ(01)
                                                      RV130-SELKZ(03)      X          <<<<Change this number to the row number of the key combination
    You see the 03, it will put the radio button at row 3, if yours is 9, make it 09 and see.
    Edited by: Jeevan Sagar on Feb 3, 2012 6:01 PM

  • Regarding LSMW Recording for Custom TCodes

    Hi Experts,
    Can we do the recording in LSMW for Custom TCodes.Actually I have created a table(fields with data elements,provided technical settings) through LSMW Batch Input Method Recording.When I specify the file in 7th step it goes to dump.Could you please help me how to do this problem?

    Yes LSMW recording can be used for Custom TCodes, that is actually the main purpose for the recording option.
    Why you get a dump can only be determined by reading the dump. Usually this info is among the first 7 pages .

  • How to copy LSMW Recording to SHDB

    Hi
    I created some complex Recording in LSMW , now i need to use this recording in SHDB (to make an ABAP program for use BDC) ; but this LSMW recording does not appears in SHDB.
    Does somebody knows how can i copy to SHDB some recording created in LSMW ?
    Any help will be appretiated.
    Regards
    Frank

    Hi Frank,
    The only solution I see is to download LSMW project, only the recording, open it and work out the file in Excel to format the columns as to the upload file format in SHDB.
    Regards,
    Edgar

  • LSMW Recording Update problem.....

    Hi,
    I am trying to do customer master update using LSMW recording for transactoion XD02. Now every field gets updated
    using this, but the field "PO BOX other city" does not get updated at any cost.
    Please help me.
    Regards,
    Tushar.

    Step 1 - Maintain Object Attributes
          Recording is done for the transaction
    Step 2 - Maintain Source Structures
          Maintain your source structures
    Step 3 - Maintain Source Fields
          Maintain source fields under the source structure
    Step 4 - Maintain Field Mapping and Conversion Rules
          Map the source structure fields to target structure fields
    Step 5 - Specify file
         Here you specify the file path to the source structure

  • SHDB vs LSMW recording

    Hi, can anybody please tell the difference between SHDB recording vs LSMW recording?
    Thank you

    This is because of the change in screen.
    When you are doing recording for BDC only minimum necessary fields appear on the screen or you can say a different screen appears from the transaction screen.
    This also helps in avoiding complexities in BDC during background mode.
    Regards,
    Amit
    Reward all helpful replies.

  • LSMW Recording for multiple line items

    Hello Gurus,
    I just wanted to know if task list has more than one operation can be loaded thru LSMW recording ? If yes,
    COuld anyone tell me the process of recording step by step as I am new to recording and not sure what is the flow.
    I have created spreadsheet with some data to test and went into LSMW and assign the mode as recording and also had given the values in the respective tcode and save it..after that do I need to perform all the 14 steps ?
    Pls advice
    Mahee

    Hi
    Please go through the below document. It is difficult to explain you completely.
    LSMW while creating first 6 steps need to be once. Later on same LSMW can be used directly from step 7.
    The below explain is for some other tcode. but steps will remain same in LSMW for your tcode.
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc

Maybe you are looking for