LSMW- Recording : Multiple Line Items
I am trying to create an LSMW recording that simulates transaction O3I7.
The thing is that we have different line items. This is similar to a sales order where we have header details and items details.
I created a recording. Then I created two structures. One header Structure and one Item structure. I define the specific header fields under the header structure and the item fields under the item structure.
However LSMW gives me an error. Because in LSMW each recording is considered as one target structure. I can't have more source structures than Target structures. Since I have One recording LSMW gives me an error.
I tried to create two recordings but this does not work since LSMW will read each one as a different transaction.
Does anyone know how to create LSMW recording with multiple line items so he/she can help?
Thx
Hi,
Not sure about the transaction that you have mentioned. However, in LSMW recording, you can load the items along with the header in 2 steps using 2 data files.
Step1: Create the header along with the first line item. Here you use a file which contains the header data along with the first line item data.
Step2. Add subsequent line items to the header. In this case you need to enter the transaction in change mode. The data file may contain items data only. Please be sure to have an identifier at header level to add the items in that specific document.
Hope this helps.
Best Regards, Murugesh
Similar Messages
-
Secatt Recording Multiple line items
Hi all,
Iam new to secatt.
Iam having couple of doubts:
1) We having the scenerios :Creating script for Purchase,Order. P.O had multiple line item's.I want to creat the script for P.O ,that should work for all line items,each line items had deliery schedule date's
(The scripts should work for Multiple line items and schedule dates )
2) How to link the transactions
( Eg: In one scripts : creating P.O > Gr Migo > invoice )
Is it possible?.If its possible pls guide me.I would appriciate, If any input.
Regards,
Hareesha kHi Hareesha,
I don't have any document particularly to this but you can refer to SAP standard eCATT documentation on http://help.sap.com/saphelp_erp2004/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm.
In case of any specific doubts you can write to me. I am also working on eCATTs.
Best regards,
Deepthi -
Multiple line items upload in LSMW
There are 265 line items in an entry. I have around 50 such entries to be uploaded vis LSMW.
The problem is that, while creating a recording, do i need to record 165 line items (164 line items are of debit and only 165th line item is credit)??
I am creating the recording for Tcode FB05 ie GL entry.
PLEASE SUGGEST ME THE SIMPLE WAY TO UPLOAD THE LARGE SUM OF ENTRIES IN LSMW.Hi.
You need not record for 165 line items. You can just record One entry in FB05, with 2 line items alone (one Debit and one credit). The Debit/ Credit indicator will be one of the fields in Recording.
Now you need to structure this field in your template and create the Field Mapping.
So, in the Excel template, you maintain all the multiple line items you want - against each line item you can mark this indicator as Debit/ Credit.
Let me know if this works.
Regards
Srini -
Unable to create PO with multiple line items through LSMW-BAPI method
Hi All,
I have a requirement of creating PO through LSMW. I can't use LSMW standard batch input program since there are some fileds not available and also it has many limitations. I'm using LSMW-BAPI method ( Business object BUS2012) which create IDOC and uses BAPI_PO_CREATE1 to ultimately post the PO in the system. I am trying to create PO from a single file which contains both Header and Item data.
Now my problem is that everytime PO is being created with Single line item only. Everytime I am giving multiple item data in the source file LSMW is preparing multiple IDOCs for multiple line items. As per my understanding this is happenng since header and item is in the same hierarchy level of IDOC type PORDCR102 and the control record is inserted for every line item in the source file.
It seems that through LSMW-BAPI it is not possible to create PO with multiple line items. Can anybody provide some input regarding this? Thanks in advance.
BR,
Atanu MukherjeeSolved by myself.
Earlier the problem was that LSMW was not being able to recognize items under same header. It was creating new IDOCs every time it gets a new item. To enable this we need to create two structure HEADERDATA and ITEMDATA. Two additional identifier fields with identifier value 'H' and 'I' should be added in these two structures respectively. Then we need one sequential file with the identifiers field followed by the header and Item data. Example:
H~header data
I~item data
I~item data
This would help the standard program to understand what are the items under same header and ultimately create PO with multiple line items.
BR,
Atanu Mukherjee -
How to handle multiple line items in lsmw
hi all,
how can i handle multiple line items in lsmw either by using direct input method or BDC recording.
first preference is Bdc recording in lsmw . can u tell me the steps in detail.
thanks,
harini.cHi Harini,
Check this link.
BDC - Header with multiple line items.
Regards,
Arun -
To Record J1IS BDC For Multiple Line Items
Hi,
Iam trying to record BDC for J1IS transaction.
while recording material document which contains more than 8 line items , Only 8 line items get saved and the rest of the items doesn't get saved ,
But when I do this manually then all the line items get saved,
Can anyone give the remedy for this Problem (to record J1IS for multiple line items).
Thanks in Advance.
Regards,
S.Janani.Hi Janani / Leo
The problem might be that the scroll down functionality after 8 line items is not recorded in your recording.
In order to overcome the issue, you need to check OK__CODE whicle page down and add it in recording after Number of line items are greater than 8.
Please check below link for details:
http://scn.sap.com/thread/1106677
http://scn.sap.com/thread/797827
http://scn.sap.com/thread/2037271
Best Regards,
Sachin -
Multiple line items uploading through LSMW
Hi,
I am using LSMW as uploading tool for master data uploading in quality server.In the case of multiple line item i am feeling difficulty to use LSMW.
Plaese help me to find solution...........Hi
First read all the BOM into an internal table and then you upload that internal table
LSMW
https://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
[ BOM UPloading BY LSMW|LSMW BOM]
Regards
pavan -
LSMW program to upload the sales order with multiple line items.
Dear SD and PP Gurus,
I am new to creating LSMW Program.
I want to create a LSMW program to upload the sales order with multiple line items. I have read on SDN that it can be done on two phases. First Create Header Data than line items. IS IT TRUE??, Or
Is there any procedure by which we can load the sales orders with multiple line items in a single run (part).
I want to use Batch process, not a BAPI or IDOC procedure.
I have created a program with
object 0090
Method 0000
Program Name RVINVB10
Program Type D
Source Structure 1 - For Header and Source Structure 2 for Line Items.
Mapped Field INDET (With Fix Value 1), ORDERTYPE, SALESORG, DISTCHANNEL, DIVISION, CUSTOMER, PONUMBER , DELVDATE, PRCGDATE, PMTTERM
INCOT1 INCOT2 with Source Structure - 1 and
Field INDENT (With Fix Value 2), ITEMNO, MATCODE, MATQTY, SUOM, PLANT, BATCH, AMOUNT with Structure-2
than maintained Structure relation ship, field Mapping, Specified Files, Assigned files, Read Data and other process,
At final stage (Start Direct Input program RVINVB10) it is giving a message - Table name not allowed.
Please tell me where I am wrong.
Thanks in advance.
DSCDear SD Gurus n Experts,
I have solved the above problem. But there is another problem appearing regarding the date format. Now system generating a message: Date . . is not valid.
While I am using Date: YYYYMMDD format in flat file, which is SAP's Standard Format.
In SDN Link: LSMW upload Sales Order using VA01/VA02 I have found that there are some date fields which are mandatory to filled. Here I have mapped
VDATU - Requested delivery date, BSTDK - Customer purchase order date, PRSDT - Date for pricing and exchange rate, BSTDK_E - Ship-to party's PO date, FKDAT - Billing Date, KORDT - Delivery Date,
and PRGRS - Date type is Constant = D
Can any one tell me, where is the priblem.
With thanks,
DSC -
Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items
Hi All
Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
NOte: Suggest me the Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
Regards
Shivakumar BandariHi,
Here is the sample code to do that...
*---> po header data
wa_poheader-vendor = your vendor..
wa_poheader-doc_type = Your doc type..check with Functional contact....
wa_poheader-purch_org = Purchasing Org..
wa_poheader-pur_group = Purchasing Group
*---> po header data (change toolbar)
wa_poheaderx-vendor = 'X'.
wa_poheaderx-doc_type = 'X'.
wa_poheaderx-purch_org = 'X'.
wa_poheaderx-pur_group = 'X'.
*---> poitem data
data: item like ekpo-ebelp.
item = '0010'.
loop at t_parts.
it_poitem-po_item = '00010'.
IT_POITEM-PLANT = Plant..
IT_POITEM-STGE_LOC = Sloc...
*---> poitemx (item data change toolbar)
it_poitemx-po_item = '0010'.
it_poitemx-po_itemx = 'X'.
IT_POITEMX-PLANT = 'X'.
IT_POITEMX-STGE_LOC = 'X'.
*---> add record's to internal table
APPEND: it_poitem,
it_poitemx.
endloop.
*call bapi_po_create1
CLEAR v_ebeln.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_poheader
poheaderx = wa_poheaderx
IMPORTING
exppurchaseorder = v_ebeln
TABLES
return = it_return
poitem = it_poitem
poitemx = it_poitemx.
*---> check the return table for error message
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
endif.
Thanks,
Murali -
How to implement bapi for transaction code f-02 for multiple line items
Hi All,
I am having one requirement to of implementing bapi for tcode f-02.
I have identified the name of the badi e.i. BAPI_ACC_GL_POSTING_POST.
but i dont have any idea how implement it.
i have multiple line items for one header.
Please help me in this.
Regards,
Shoaib.HI
In recording once u save, the recording comings out the transaction.
If u want the pop-up to display before save. Then in recording also
after entering all data and before Save press enter or do check.Try
this way after that save the transaction.
Regards,
Raghu. -
Pls help me to create SO using BDC for multiple line items (VA01)
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.LokeshIf u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra -
BDC to create SO(VA01) for multiple line items
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
[email protected]
Pls help me this is urgent requirement.
Thanks & Regards,
J.LokeshHI,
Instead of using BDC , why dont you make use of BAPI.
As you are on ECC, you can make use of BAPI BAPI_SALESORDER_CREATEFROMDAT2
Collect all your records based on PO # and pass them into line item table structure ORDER_ITEMS_IN.
*--Logic something like this.
loop at it_exceldata into l_line.
loop at it_exceldata into l_so where bstkd_e eq l_line-bstkd.
*This will loop at all the same PO#
*collect the data related into corr tables. and append
endloop.
*Now you are outside the loop.
*Call the BAPI to update this SO
delete it_exceldata where bstkd_e eq l_line-bstkd_e.
endloop.
Also pass all the necessary data to header structure ORDER_HEADER_IN
Do not check for Sy-subrc at the end of execution.
Instead read the Return table with message type 'A' or 'E whichi means there is an error/abort in BAPI execution.
Remember to expicitly COMMIT_WORK after succesfull execution of BAPI using BAPI_TRANSACTION_COMMIT
Please let me know , if you need more help in this
Gary. -
BDC for multiple line items (VA01)
Hi Experts,
I create a BDC for VA01 transaction for single line item in that now i want to upload multiple line items also with o/p of total no. of records uploaded, no. of records posted and the no. of error records...
Can any body explain with sample code...Hi,
if the flat file is containing header and item records...
first split those records tooo two internal tables header and item..
Loop at header ...
process of recording steps for header....
Loop at item...
here create a varialbe with char 2 .. for index value....
process of item recording steps..
increment the index value by 1....
here u have to pass 'p+' OK_CODE..
Endloop ..(item)
Endloop...(header)
for more info goo through this link...
http://www.sap-img.com/bdc.htm
hope helpful
Raghunath.S -
hi all,
i am developing bdc program to upload multiple line items for ml10.
i am uploading folling fields
spec_no
astyp
txz01,
sort1,
waers,
matkl,
ekorg,
srvpos ' service number
menge. 'quantity
service number and quantity are multiple line items.
i have developed a code which is taking single record only, it is not working for multiple service no and quantity.
include bdcrecx1.
parameters: filename like rlgrap-filename.
data: begin of record,
SPEC_NO(10),
ASTYP(4),
TXZ01(40),
SORT1(20),
WAERS(5),
MATKL(9),
EKORG(4),
NEW_ROW(10),
SRVPOS(18),
MENGE(13),
end of record.
data: itab_program like record occurs 0 with header line.
At Selection Screen
at selection-screen on value-request for filename.
perform query_filename changing filename.
*START-OF-SELECTION
start-of-selection.
*-- Upload flat data to ITAB.
perform upload_to_itab.
*{ chg001 -- modified as per requirement
perform open_group.
loop at itab_program.
perform upload_programs.
endloop.
perform close_group.
FORM UPLOAD_TO_ITAB *
form upload_to_itab.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = filename
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab_program
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
write : 'File opening error.'.
endif.
endform.
FORM QUERY_FILENAME *
--> P_FILENAME *
form query_filename changing p_filename.
data : tmp_filename like filename.
call function 'WS_FILENAME_GET'
exporting
def_filename = filename
mask = ',.txt,.txt.'
mode = 'O'
title = 'Select the file to Upload'
importing
filename = tmp_filename
exceptions
inv_winsys = 01
no_batch = 02
selection_cancel = 03
selection_error = 04.
if sy-subrc = 0.
filename = tmp_filename.
endif.
endform.
*perform open_group.
*& Form UPLOAD_programs
text
--> p1 text
<-- p2 text
form upload_programs.
perform bdc_dynpro using 'SAPLMLSM' '0100'.
perform bdc_field using 'BDC_CURSOR'
'TEMP_SPEC-ASTYP'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'TMP_SPEC-SPEC_NO'
ITAB_PROGRAM-SPEC_NO.
perform bdc_field using 'TMP_SPEC-ASTYP'
ITAB_PROGRAM-ASTYP.
*****************************************************************SCREEN1
perform bdc_dynpro using 'SAPLMLSM' '0200'.
perform bdc_field using 'BDC_CURSOR'
'TMP_SPEC-EKORG'.
perform bdc_field using 'BDC_OKCODE'
'=SRV'.
perform bdc_field using 'TMP_SPEC-TXZ01'
ITAB_PROGRAM-TXZ01.
perform bdc_field using 'TMP_SPEC-SORT1'
ITAB_PROGRAM-SORT1.
perform bdc_field using 'TMP_SPEC-WAERS'
ITAB_PROGRAM-WAERS.
perform bdc_field using 'TMP_SPEC-MATKL'
ITAB_PROGRAM-MATKL.
perform bdc_field using 'TMP_SPEC-EKORG'
ITAB_PROGRAM-EKORG.
*****************************************************************END OF SCREEN2
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=BZE'.
*perform bdc_field using 'RM11P-HEADTEXT'
ITAB_PROGRAM-TXZ01.
perform bdc_field using 'BDC_SUBSCR'
'SAPLMLSP'.
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=BZE'.
perform bdc_field using 'BDC_CURSOR'
'ESLL-MENGE(01)'.
perform bdc_field using 'ESLL-SRVPOS(01)'
ITAB_PROGRAM-SRVPOS.
perform bdc_field using 'ESLL-MENGE(01)'
ITAB_PROGRAM-MENGE.
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=SAV'.
perform bdc_field using 'BDC_SUBSCR'
'SAPLMLSP'.
perform bdc_transaction using 'ML10'.
endform. " UPLOAD_programs
can any body help me in this regard.
thanks in advance
sivaLoop at itab_program.
< Here will be your BDC Program>
call transaction..... .
endloop.
and all the records in you internal table itab_program will get updated...
Regards.
Jayant
<b>Please award if helpful</b> -
"BDC for multiple line items of PO"
I am using this code to move data for multiple line items of a PO. But only one is getting transferred. I am using BDC for this.
FORM transaction_bdc .
DATA :
v_cnt(2) TYPE n,
v_bst(2) TYPE n,
v_bn TYPE i,
v_bstpo(25),
v_ebtyp(25),
v_menge(25),
v_eeind(25),
v_xblnr(25),
v_xblnr1(25),
v_ebelp(2) TYPE n,
v_ebelpt(2),
v_menge1(11),
v_ebt TYPE i,
v_vebtyp LIKE ekes-ebtyp,
v_eb(2) TYPE n,
v_tcselflag(40),
v_tem(2) TYPE n,
v_correct TYPE i,
v_file TYPE string.
DATA: ls_outtab TYPE tb_struc.
DATA: l_valid TYPE c,
l_locked TYPE c.
CALL METHOD g_grid->check_changed_data
IMPORTING
e_valid = l_valid.
IF l_valid EQ 'X'.
LOOP AT tb_output WHERE check EQ 'X' .
MOVE-CORRESPONDING tb_output TO itab_output.
APPEND itab_output.
CLEAR itab_output.
ENDLOOP.
IF tb_output-check <> 'X'.
MESSAGE e003 WITH text-004.
ENDIF.
ENDIF.
IF itab_output[] IS NOT INITIAL.
PERFORM open_group.
***looping at purchase order level.
LOOP AT itab_output where ebelp is not initial .
CLEAR v_bn.
CLEAR v_ebt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06E-BSTNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RM06E-BSTNR'
itab_output-ebeln.
***Changing alphanumeric fields and quantity fields to character type**
*v_ebelp = tB_OUTPUT-ebelp.
*clear v_ebelpt.
*v_menge1 = tB_OUTPUT-menge.
*v_ebelpt = v_ebelp.
***End Of Changing**
*Checking for the exact number of the item**
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
v_bst = v_bn + 1.
*End Of Checking**
**Mapping items**
v_tem = 1.
CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=DETA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EKPO-BSTAE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BSTA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_field USING v_tcselflag
'X'.
**Checking weather Confirmation category already exists**
SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
itab_output-ebelp AND ebeln = itab_output-ebeln.
ENDSELECT.
IF sy-dbcnt > 0.
v_ebt = sy-dbcnt.
ENDIF.
v_eb = v_ebt + 1.
**End Of Checking**
**For Line items**
CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
**End**
PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_xblnr.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING v_ebtyp
itab_output-ebtyp.
PERFORM bdc_field USING v_eeind
itab_output-eindt.
PERFORM bdc_field USING v_menge
v_menge1.
PERFORM bdc_field USING v_xblnr
itab_output-xblnr.
**End Of Mappings**
*loop at itab_output.
MOVE-CORRESPONDING itab_output TO ekes.
modify ekes.
MOVE-CORRESPONDING itab_output TO eket.
MODIFY eket.
MOVE-CORRESPONDING tb_output TO ekpo.
MODIFY ekpo.
ENDLOOP.
CALL TRANSACTION 'ME22N'
USING itbdc
MODE 'E'.
commit work.
perform bdc_transaction using 'ME22N'.
**End Of Purchase Order Loop**
PERFORM close_group.
endloop.
endif.Hi Asha,
check the below code once...
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
Here you are reading the table itab_output with index 1, it means you alway reading the first record of that internal table.
Regards,
Satya.
Maybe you are looking for
-
Hi Frds .. how to find the open po and pr? i want to display the open PO and PR number and qty. Kindly give me table name and field of its. Its Urgent.. Thanks Pari
-
Premiere Elements 9 DVD's won't play in Sony players
This problem spans "Pre 3, Pre7, and Pre9" where the DVD's made on any of these versions will NOT play in any of the three Sony DVD players we have. I upgraded from ver 3 to ver 9 (trying 7 on the way) to solve this problem but NO luck. Adobe tech. s
-
Connecting a Visio tablet to my wrt320n
I have a wrt320n. works good with all my computers. I bought a Visio tablet and I can only hook up to an open network. I want to be able to use my router with security. Such as wpa/wpa2 or wep. I tried all connections. Only the open network is the on
-
Pro C - Select abc into :cds returns value but strcpy(cds, 'test' did not
Dear All I have a test.pc program at Unix as follow: varchar cds [11]; varchar xyz [30]; varchar fxo [11] main(argc, argv) int argc; char **argv; find_sp_inv (); ins_inv(); find_sp_inv() EXEC SQL SELECT inv_no into :cds FROM sup_inv WHERE REF_NO = 12
-
Photo Stream Behavior Win 7/iCloud
I have 2 iPhones setup exactly the same (pretty sure), one with my iCloud account, the other with my wife's iCloud account. I've got iCloud/photo stream setup on a windows 7 system, and everything has been working well, but.... Just today i noticed w