LSMW - RMDATIND Upload material master

Hi All,
I'm using LSMW direct input method (RMDATIND) to upload material master. However, I'm having issues on uploading material prices (eg: moving average price) where the format uploaded was incorrect.
LSWM Data Source I've declared for VERPR (Moving Average Price) is character with 14 Length size. Values populated in upload file is eg: 132.93.
The value been created in material master is-> 13  293,00.
Can anyone advise on this issues? Is there any wrong to input value or data source declaration? Thanks.

Hi Blue Sky,
execute the whole process of LSMW in direct input  and go to SM35 to check and process the session manually,,
-Regards
Sid

Similar Messages

  • Upload Material master with long text using LSMW

    Hello,
    i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2,  purchasing, purchase order text, plant data 1,2.
    i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
    please help.

    ca u clarify how can i do it.
    suppos i have longtext   "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is  10 RMT.  A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping  of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire.  F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
    then what i have to do changes in lsmw.?

  • I want to upload material master (MM01) using LSMW with BAPI method

    I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
    Which business object and Method I should use so that i can do both.
    Thanks
    kumar n

    Hi,
    The business object is BUS1001.
    Thanks,
    Murali

  • I have uploaded Material Master thr LSMW but Materials are not saved.

    Hi
    i have uploaded  Material Master through LSMW but unfortunetly Matreials are not saved in system.

    Hi
    Check first with one record you are able to create the material Manually by using tcode MM01.
    Or Rerun the batch Input in Foreground mode so that you can see the error or whether Materila no is created
    I do not think so any test mode in Batch Input session.
    Check the Log in SM35 for your session if you have any error messages.
    Hope it helps
    Karthik

  • Unable to use SCAT to upload material master in ECC 6

    HI
    I am unable to use SCAT to upload material master in ECC 6,
    an error is triggering
    "Releases higher than 6.40 are not permitted
    Message no. TT005
    Diagnosis
    With Web Application Server Release 6.40, you cannot create new automated CATT test cases. However, you can create manual CATT test cases"
    canany body please help me to use SCAT
    Sreeram

    you have to read yourself:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    I certainly do not use SCAT or SECATT to load master data, especially not material master.
    A material master has  dynamic screens, based on the material type the view selection will be different, based on entries made in MRP view fields become hidden or mandatory. Such things canot be done with a static recording.
    SAP provides batch input programs and BAPIs for material master load and additonally loading per IDOC in LSMW (which offers as well batch input and Bapi methods)

  • Upload Material Master to non SAP Catalog

    Hi Guys,
    we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
    Are there reports available in the backend  (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
    Any hints are welcome!
    Thx
    Dieter

    Hi Dieter,
    Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
    Regards,
    Nikhil

  • Need to upload material master.

    Hi experts,
    I am periodically required to change values in some fields from MRP 1,2,3 and 4 views. It takes hell of a time as there are many material codes..nearly 500 every month.
    My question is is there any other quick input method like creating an excel file for that data and upload it?
    I remember in mylast company for uploading material master the consultants provided us with that kind of query/data run.
    Regards,
    Sam

    Dear ,
    You need to run BDC in Back ground for uploading Material Master parametrs or new material creation .It can be Batch process.
    Or Goto T-code MM17 mass change check tables there, and retreive data one by one from se16, then merge your file. or develop report detailed report for this then download.
    Look up the following  therads which is self explaintaory :
    http://wiki.sdn.sap.com/wiki/display/ABAP/MaterialMasterUpload+Program
    http://wiki.sdn.sap.com/wiki/display/Snippets/BDCProgramtoUploadMaterialMasterData+(MM01)
    http://www.sap-img.com/abap/upload-material-master-finish-goods.htm
    Just discuss with your ABAPer and provide him the Excell sheet with necessary parametrs .
    Regards
    JH
    Edited by: Jiaul Haque on Oct 11, 2010 3:29 PM

  • LSMW to upload Material Characteritics and BOM info

    Hi,
    I am using LSMW to upload Material Characteristic and BOM info for the first time. It would be of great help if someone can provide me with an example with screenshots. Thanx in advance for your help.
    Sachin

    Hi Sachin,
    1) BOM and Classification Datacan not be uploaded together.
    We have Standard Programs available to these uplaods.
    BOM upload
    Object - 0030
    method -0001
    Program - RCSBI010(AUTOMATIC)
    Classification uplaod
    Object -0130
    Method- 0002
    Program-RCCLBI03
    http://www.megaupload.com/?d=578KUG4X
    please follow the link and download  the file.
    It has all the critical steps, screen shots, sample load file.
    let me know if it helps.
    Have fun,
    Satheesh.

  • Upload material master data

    Hi friends,
    can u provide prog for upload material master data by using bapi bapi_material_savedata.
    i need to pass the following fields .
                    MARA-MATNR
               MARA-MBRSH
                  MARA-MTART
                MARA-MATKL
                 MARA-MEINS
              MAKT-SPRAS
                MAKT-MAKTX
                MVKE-VKORG
              MVKE-VTWEG
                    MVKE-MTPOS
                 MARA-TRAGR
                          MARC-WERKS
               MARC-EKGRP
                   MBEW-BWKEY   and also using dynamic internal table.

    Hi siddu,
    As a developer you should ask for the code.
    Try u r self writing the code.If u struck any where just post the question.
    There wil be many threads regrading material master data.
    Give ur bapi BAPI_MATERIAL_SAVEDATA and search in the forum then u will get so many threads.
    serach from there and write accrding to ur req.
    Thanks,

  • LSMW IDOC method to upload material master

    hi,
    i want to upload the Material Master using LSMW Idoc Method.  I have not worked in LSMW IDOC MEthod previously
    can anyone help me.. please..
    ThankS IN ADVANCE
    GUHAPRIYAN

    hi Guhapriyan,
          In LSMW there are four method to migrate data.Idoc is one such method.You need to define three thing message type,
    Basic type,enhancement and a check box for enable structure for EDI.Once you complete this ,it ready to transfer.Before that you need to go through 12 basic steps.
    Hope this will help you.
    Regards,
    Albert

  • Upload Material Master using LSMW BAPI BUS1001006-SaveData

    Hi Gurus,
    I'm working with material master upload using the BAPI BUS1001006-SaveData.
    I'm wondering on how can I know what structure should I populate on step 4 of LSMW "Maintain Field Mapping and Conversion Rules".
    Seen some tutorials on material master upload but it wasn't explained there why or what structure should be populated..
    Thanks and Regards.

    I just check each structure one by one to which the field is appropriate depending on its description....

  • LSMW(Direct Input) Material master issues

    Hi,
    I have few issues on Material master-LSMW(Direct Input-RMDATIND) data upload(creating materials).
    1. Can i upload excel sheet for uploading data! What option i have to choose in 'specify files' for this!
    2. I am using fields MBRSH, MTART, MAKTX, MEINS, BISMT, MATKL, MAGRV for mapping.
        But when i tried to upload in last step-start direct input program with Lock Mode-'N' it is giving error as
        'Plant data does not exist'. Because this is for 'Basic Data' i though no need to input plant.
    3. MATNR field is not needed for creation right as it is auto generated!
    4. I have to do seperate object for this project for 'Sales organization data' & Plant Data is there any checks needed for the same!
    Can anybody give solutions for the above!
    Thanks in advance.
    Thanks,
    Deep.

    1. Now i am trying to process 4 records it is creating 3 records.
        It is always skipping 1st record in flat file.
        Any check required!
    2. Also i want to write a output file(log file) to my presentation/application server with all material no's created & material descriptions. Where can i do the same!
    3. Can anybody tell me how to upload using excel sheet.
    Thanks,
    Deep.
    Edited by: Deep on May 14, 2009 3:21 PM

  • LSMW, to upload material sales long text , MM02

    Hi
    I have not been able to upload long the long text of the material master record related to view Sales text (see tcode MM02). The upload should use the tcode LSMW, below is the steps that I used to create my LSMW codes:
    Step 1: Maintain Object attributes
    Object : 0001
    Method: 0001
    Program name: /SAPDMC/SAP_LSMW_IMPORT_TEXTS
    Program type: D
    Step 2: Maintain source structure
    I create two structures
    MAT_LONGTEXT (Material Long text)
    TEXT_LINES (Text lines)
    Step 3: Sources fields
    MAT_LONGTEXT with 3 fields: Identifier (C, 1, H), MATNR (C, 18, material), TXTID (C, 132, Text ID)
    TEXT_LINES with 2 fields:  IDENTIFIER (C, 1, I), LINE (text Line)
    Step 4: Field Mapping and rule
    OBJECT:
    constant, /SAPDMC/LTXTH-OBJECT = 'MVKE'.
    NAME:
    Source: MAT_LONGTEXT-MATNR (Material)
    Move, /SAPDMC/LTXTH-NAME = MAT_LONGTEXT-MATNR.
    ID:
    Source: MAT_LONGTEXT-IDENTIFIER (Identifier)
    Move, /SAPDMC/LTXTH-ID = MAT_LONGTEXT-IDENTIFIER.
    SPRAS : Language Key
    Constant, /SAPDMC/LTXTH-SPRAS = 'E'.
    TXTFORMAT:
    Constant
    /SAPDMC/LTXTL-TEXTFORMAT = '*'.
    TEXTLINE :
    Source:  TEXT_LINES-LINE (Text Line)
    Move,  /SAPDMC/LTXTL-TEXTLINE = TEXT_LINES-LINE.
    please help

    I had these settings before, but nothing happened ...
    Here is the code:
    *& Report  ZREADVERTRIEBSTEXT
    REPORT  ZREADVERTRIEBSTEXT.
    data : tbody like TLINE occurs 0 with header line.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        CLIENT                        = SY-MANDT
        ID                            = '0001'
        LANGUAGE                      = SY-LANGU
        NAME                          = '5007093           101101'
        OBJECT                        = 'MVKE'
    *    ARCHIVE_HANDLE                = 0
    *    LOCAL_CAT                     = ' '
    *  IMPORTING
    *    HEADER                        =
      TABLES
        LINES                         = tbody
    *  EXCEPTIONS
    *    ID                            = 1
    *    LANGUAGE                      = 2
    *    NAME                          = 3
    *    NOT_FOUND                     = 4
    *    OBJECT                        = 5
    *    REFERENCE_CHECK               = 6
    *    WRONG_ACCESS_TO_ARCHIVE       = 7
    *    OTHERS                        = 8
    *IF SY-SUBRC 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.

  • LSMW IDOC MATMAS05 Material Master

    Hi Experts,
    Actually ,Iam using IDOC method in LSMW for Material Master Upload.
    For that Iam using the IDOC type MATMAS05 .
    So in the input file when Iam not the giving the Material Number IDOC is getting failed
    with status 51 and giving the errors that "NO MATERIAL NUMBER
    TRANSFERED".
    And
    if Iam giving a material number in the test file it is again getting failed
    giving the error " The material does not exist ".
    I am not able to understand what iam missing here.
    Other than this Iam passing all the mandatory fields required .
    Also in the each segment iam passing the MSGFN = '009'. i.e. to create.
    Pls help.
    Thanks in Advance.
    Regards,
    Mithun

    Hi Chuin,
    This forum doesn't provide specific info on LSMW. You may check https://service.sap.com/lsmw for more info.
    Regards,
    Markus

  • Uploading material master

    Dear Sap Gurus
      We are going to upload the material master  which is the good method to upload the material master please send the documentation . my email is [email protected] in advance.
    Regards
    Prakash

    Dear Prakash,
    You can use LSMW Tool.
    It has the following Options:
    1. Direct Input
    2. Batch Input
    3. BAPI
    4. IDOC
    For information regarding LSMW steps visit the following link:
    /people/hema.rao/blog/2006/09/14/lsmw--step-by-step
    http://help.sap.com/bp_blv1500/BL_US/html/dataconv_lsmw.htm
    BDC/BAPI steps:
    1. Fetch the data (Download from Desktop or Read from Application Sever).
    2. Massage Data as per SAP Format.
    3. Validate data (Move invalid data to internal table so that you can display the same)
    4. Pass valid data
    5. Move error data to internal table
    If you are using BAPI the error records would be moved to BAPIRET2 or BPIRETURN.
    If you are using BDC:
    a. Session Method : You would need to process the session. Messages can be displayed with session analysis.
    b. Call Transaction : You would need to populate the error messages by using a table with structure BDCMSGCOLL.
    You could also develop a custom program using BDC or BAPI.
    Visit the following link:
    Re: sap general
    Where you would find more information regarding BDC and LSMW.
    Regards,
    Naveen.

Maybe you are looking for