Lsmw SAP object structures

Hello,
Can anyone tell me how the source file should be created when using multiple structures as it is used in standard SAP objects.
How does the tabular seperated file look like?
How do you link 1:N relationship in that very same file? Is it possible to, for instance, have multiple suppliers in one file and that there are multiple supplier accountsgroups.
So than you would have per supplier account group multiple suppliers where there are more than one supplier account groups.
I just can't find how such a source file should look like.
Regards,
Manfred

Hi Manfred,
Would you please check the below help....
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
Regards,
S.Manu.

Similar Messages

LSMW Copy Object

Hi,
In LSMW we have Project, SubProject, Object in this,
When I copied the Object Which is having Batch Input Method the Recording is not copied to my destination Object can any one please help out.
To Copy the Object I went Tcode: LSMW -> All Objects of the Project
You will get the list of the Object under the Project there click on the Object u wants to copy and go with (Ctrl+F4).

hi
r u looking to transfre the lsmw project to development server if so fallow the lines
Actually, it depends based upon the requirement. There are some advantages and disadvantages with both of the methods.
See the following documentation. I think this would be helpful for you and based upon your requirement you proceed further.
Transport LSMW Projects
The LSM Workbench provides data transport for a project via both the SAP transport system and down-/upload. (Excluded are the presettings for IDoc inbound processing. These presettings should be manually created in every SAP system and every client.)
1. Generate Change Request
Choosing this function creates an SAP change request containing all information about an LSMW project. This SAP change request can be exported / imported with the usual means of SAP correction and transporting. You can find this function in the initial screen under Extras -> Create change request.
When transporting LSMW data this way, you can trace the transports any time in SAP correction and transporting.
Note 1: When importing such a request, the complete project is deleted from the target system first. It is then created again.
Note 2: When exporting the transport request, all changes to the selected project made until the time of export are entered (not only until the time of creation of the transport request.)
2. Export Project
In the initial screen, select Extras  Export project. This first displays the structure tree of the selected project. Via Select / Deselect you can select whether the entire project or parts of the project are exported. Then select Export. The program then creates an ASCII file.
Note: The selected elements are exported together with their documentation
3.Import ProjectThe exported mapping and rules can be imported into another SAP system.
On the selection screen, select Extras -> Import. The program then prompts you to enter the name of the PC file. The file is imported and the contents are analyzed. After the analysis, a list of the subprojects and objects found is displayed.
You can now mark the objects to be imported. Project data existing already are check-marked. They are overwritten by the import.
You can prevent a project already existing in the target system from being overwritten by using function "Import under different name".
Note: The selected elements are imported together with their documentation.
If you feel this is helpful, don't forget to reward points.
if u find it useful plz mark the points
Regards,
Naveen

Import of SAP Objects into Integration Repository in XI 3.0

Hi all,
I am not able to import SAP objects into the Integration Repository in XI 3.0. This option is under any Software Component Version. I have selected the radio button "Import of RFC and IDoc interfaces from SAP systems permitted", in the Software Component Version settings. After the connection data is specified for the SAP system nothing appears under the IDoc, Whereas the import of RFCs is successfull.
We also have another installation of SAP XI 3.0, here this option is working properly. Can anyone tell me what is the problem, is is there something else to be configured inorder to do this.
Best regards,
Norway

Hi Stephan
Thank you for your answer. We have followed your instructions but did only get half a success. Here is what we have done:
1) Created "External Definitions" for all related xsd-files with the same name as the xsd-filename and in our own namespace. Our namespace is different from those specified in the xsd-files. We have not change the namespaces in the xsd-files.
2) Maintained the "source"-field with the name for the xsd-file and not the url as specified in our answer. When we used the filename only we got a value the field "name" in the "External References".
3) We made a message mapping and imported the "top-level-xsd-element" from the "External Definition". This resulted in only the top level element and nothing else. What we expected was the possibility to drill down through the complete structure.
What did we doe wrong? Perhaps I could talk you into spending 10 min. and try it your self? This url leads to a zip file with all the related xsd files: http://rep.oio.dk/ubl/xml/schemas/0p71/documentation/resources.html
Do you know if it will be possible to make references across namespaces in a later version of XI?
Regards
Christian

APO DP - product characteristic in planning object structure

I am using APO DP V5.
In my planning object structure I am using a bespoke characteristic ZPRD for product. I have navigation attributes for this characteristic, which is why I am not using the standard 9AMATNR characteristic. So, in my planning object structure, I assign ZPRD as the product chaarcteristic (via Edit > Assign prod/loc).
I have defined ZPRD as character 40, with conversion routine PRODU - so that it is consistent with 9AMATNR.
In my solution we are integrating APO DP with a SAP ECC system, where of course the product is defined as character 18.
So, my question is: does ZPRD <u>have to be character 40</u> (to be consistent with 9AMATNR), or could I defined it as character 18?
Thanks,
Bob Austin, Atos Origin

HI,
You can define the product out put lengh in customizing setting of APO.
And also this setting is independent of R/3 system.Kindly refer
the following help information on this customizing setting:
'Specify Output Format of Product Number
Dependencies
Effects on SAP R/3 systems via SAP APO Core Interface (CIF):
The settings made here are independent of the SAP R/3 system and only
influence the conversion of the internal SAP APO display to external SAP
APO display.
As with conversion of SAP APO data, there is also a similar conversion
of the internal SAP R/3 display to external SAP R/3 display. So that the
numbers also appear immediately on the interface, it is recommended that
you use a corresponding conversion in SAP APO and in SAP R/3.
If the SAP APO is planning for several SAP R/3 systems, it may be
necessary to make the identical numbers from different SAP R/3 systems
unique in SAP APO. It is usual to use a prefix or suffix to do this. In
this case, the internal SAP R/3 display and the internal SAP APO display
are different. The conversion between the internal and external SAP APO
display thus also differs from the conversion in SAP R/3.'
Hope this will helps you.
Regards,
Sunitha.

Planning object structure

Dear friends,
in a new APO system i want to create planning object structure. when i tried to create planning object structure i got an error saying Invalid planning object structure. its just not letting me create POS. pls guide.
Thanks

Hi Vinay,
Please check on the following
1) Check the naming convention for the POS that you are creating, like whether it has any special characters etc.,
2) Check whether the sap notes 1106607 & 1098568 are relevant for you
Regards
R. Senthil mareeswaran.

SAP Enterprise Structure for Plant Maintenance Module

hi,
please explain me SAP Enterprise Structure for Plant maintenance (PM) module.

Hi,
As SAP PM enterprise structure comprises of Company, Maintenance Planning plant & Maintenance Plant. Company will be defined in Financial Accounting. Production plant will be the maintenance plant. Seperate plant would be created as Maintenance Planning Plant. All the plants (Maintenance Planning plant & Maintenance Plant) should be assigned to the company. All the maintenance plants should be assigned to Maintenance Planning Plant. For all the Maintenance Plants, technical objects would be created.
Company --> Maintenance Planning Plant --> Maintenance Plant.
Relation between Maintenance Planning Plant & Maintenance Plant will be 1:1 or 1:n or n:1.
Regards,
Maheswaran.

Master Planning Object Structure

Hi Everybody,
Can any one please clarify my doubt as to whether the MPOS (or Master Planning Object Structure) has characteristics or key figures or both of them?
Thanks & Regards,
Ujwal Arora
SAP Support Consultant

Hi ,
MPOS only have the characteristics value not keyfigures,
The planning area only having your keyfigures values.
The value of the characteristics which is stored in planning area that's why you refencing your MPOS in planning area while creation.
Let me know if you need more information.
Regards,
Prabhu

Service Conditions (ML45/ML46/ML47) - SAP Object

Hi,
Can you please provide me the SAP Object for ML45/ML46. We want to batch add/maintain our service conditions on LSMW.
Thanks,
Willie

try idoc method COND_A or batch input method 0070 0000 RV14BTCI ?

Planning object structure name 9ASNPBAS is invalid

Hi Friends,
We installed a new SCM5.0 but we find that the SAP Satndard POS 9ADPBAS / 9ASNPBAS etc are invalid. Is there any specific settings to activate them?
Thanks in advance for your help.
Sam

Sam,
Looks like the standard 9A* Infoobjects are missing in the system.
You then need to activate them from business content. Some of them are used in the standard planning object structures and hence, the error message you get.
Please goto rsa1, Business Content and activate 9A* Infoobjects
from the business content or run program /SAPAPO/TS_D_OBJECTS_COPY.
These are worth trying while waiting for SAPs reply
Thanks
Prince Jose

Assign user into SAP organizational structure

Hi,
I'm searching program or function which allows assigning user to a position within the SAP organizational structure as it can be done using the transaction PPOME.
Thanks in advance for your answers.
Regards,
PFO

Hi PFO - Use tcode PP01 to assign user to position,
PP01->object type = position-> click on Relationships and click change mode now change the relationship type as uer and assign user to the selected position.
hope this is helpful.
~john

Find exact package for saving the workbech request for std SAP object

Hello friends I have edited a std SAP prog for printing the import PO(got access key from market place).After editing while creating transport request I am not able to find the package to which it should be saved.now the problem is that How to move that program to our quality server.
the program is
/1BCDWB/LSF00000063TOP

Hi achal,
are you sure you modified a standard SAP object. /1BCDWB/ prefix is common with all quick view reports - they are local and user-specific. You can convert a quickview to query to report. Using a modification key you may add it to the standard - choose a package as you prefer. But better copy the generated query report to customer name space - because it never was and never will be SAP standard. If it is in customer name space, release changes are no problem at all.
Regards,
Clemens

LSMW Standard object for class

hi,
I am trying to upload class data through LSMW standard object,0140,
but while specifying file step it is giving error , No logical path has been specified.
how to solve this problem.
Regards

I repeatedly do this with LSMW by recording method. (recording done once and using repeatedly)
The recorded template is
EQUNR KLART CLASS_01 STDCL_01
If it is the case of Functional Location TPLNR in place of EQUNR.
May try this way.
Regards
Jogeswara Rao

Branching to DMS doc from SAP object trans screen(newly createdobject link)

Hi
I have created a new document type and been able to attach a new sap object to that DMS document and view it in the object link of that document in CV02n, Cv03N. My problem is how to display the document from sap object screen (vice versa is always possible)
For standard object already available such linking is provided by SAP
(like in mm03->Extras->Document data) but I have added a new SAP object say OIGV. How to browse to ducument data from o4v2, o4v3 transaction. Is there any generic strategy for enhancing each and every SAP object transaction screen to branch to its linked DMS document
With best of regards
Saurav Choudhury

Hi Sai,
regarding your description I would kindly ask you to go to transaction DC10 and mark a document type where the necessary object is linked under 'Define object links'. Choose the right object and display its details by double-click. Then you will see the field 'Create document' where you have to enter a value '1' (using transaction) or '2' (simple creation). Please enter a value and flag the 'Additional function' checkbox too.
Based on your description I'm sure that you are using the 'simple creation' mode for this kind of object type in the DMS customizing. Please note that for the simple creation of documents mandatory fields (if set in customizing) cannot be filled and this will lead to error messages.
Please note that the value "1" for the creation of documents is used to enable a user to simple attache a word file on object side without going to the transaction CV01n. Therefore the system behaviour is different then creating a document by CV01n and attaching a word file to it.
However, you can change the behaviour how the document is created from equipment master transaction if you change the customizing in transaction DC10 like this:
If you maintain the value "2" for creation of documents, the user is put to transaction CV01n for the creation of document info records. So maybe this would solve the issue.
Best regards,
Christoph

SAP Objects not loaded after successul connection in SUP

Hi,
I am using SUP 2.0. Trying to connect to a SAP system using SAP Router string.
Have configured the Application Server Name, System ID, System No, Client ID and the login credentials. I am able to ping the SAP system and the connection is successful. But it doesn't load the SAP objects..It keeps saying 'Reading SAP Objects from Repository'.. and the Application Components are not seen.
Any help would be appreciated.
Thanks

Hi Sundar,
i have same problem. Could you please post your code here?
Regards
Engin

SAP HR Structural Authorizations

Hi Experts,
I need a help regarding SAP HR Structural Authorizations.
Currently our HR System is set with structural authorizations were in
users will be accessing HR Org structure with different pd-profile and HR relationships (with Org units ex:
assistant relation, manager relation).
Now we want to design the roles based on company codes, where users should be able to see
all organization units within company code 'xyz'.
Do we need to create new pd-profile or new HR relationships or just restrict within existing HR roles for
accessing organizations units within different company codes.
Please guide me steps to proceed with this requirement?
Your early response is highly appreciated, thanks in advance......

You will need to talk to the HR folks about this and whether any employee grouping on the HR side matches a company code unit on the FI side to use in the authorizations.
This means that HR data and processes are also aligned to finance processes, which was often the case with local HR systems but less so with global ones.
The answer is on your side in the data and the processes. There is no single field which you can use for both, let alone an org. level field known to structural authorizations.
Cheers
Julius

Lsmw SAP object structures

Similar Messages

Maybe you are looking for