LSMW upload - data doent not reflect in transaction

Hi ALl,
I have an LSMW upload... where i upload data into a transaction.. once a transaction is complete it displays message as successful but when i go into that transaction it doesnt reflect data....... what can be the problem???

I dont have this transaction in my system as we dont use extended WM.
However, what you wrote is a kind contrary within :
when fresh records are uploaded hrough LSMW then they are uploaded...but when we go to that tcode
then records are not there.
. but when we manully entering these records then error msg comes that these records are already exists
is this /SCWM/RSRC transaction a transaction that does display, create and change in one transaction?
so that you cannot get your data when doing display but get the error when clicking create?
or do you use a different transaction to create the records?
you are saying you loaded with batch input in LSMW, was this batch input a recording, or a standard given SAP method ?

Similar Messages

Uploaded Data's Not reflecting

Dear Experts,
Org Unit change of 1500 Workers Uploaded through BDC but still Data is not reflecting in the particular new Org Unit. I have Run the RHINTE Reports too is anything Im Missing Please help.
Thanks & Regards
Khaiser

Dear Experts,
Issue Resolved by Own!!!
Regards
Khaiser

Can LSMW upload data other than Master Data

Dear Friends,
Can LSMW upload data other than Master Data, e.g. Want to upload the Vendor Invoice line items with single Debit and multiple Credit line items are there and also more than one GL a/c are involved.
Thanks in advance.
Regards,
Mahendra Dev

The answer is YES.
There is no issue issue if you have different GL account.
The issue is if you have multiple line item (which are differeing in each entry).
For this, if you want to use LSMW, check for program, but not the recording method option.
Regards,
Ravi

Purchasing requistion dates are not reflecting in R/3

Hi All,
material created in R/3,here purchase requistion generated in R/3 & APO.
Then in APO,after Rescheduling in detailed scheduling planning board new purchase requistion delievery date is not
reflecting in R/3.
Kindly revert back ASAP.
Regards,
Venkat.
Edited by: venkat1215 on Jul 23, 2010 11:05 AM
Edited by: venkat1215 on Jul 23, 2010 11:30 AM

Venkat,
You didn't answer my question.
As a general rule of thumb, APO is much fussier about changing and synchronizing orders that were created in R/3. If you have a choice, you should always create purchase reqs in APO (although cross-creation is supported, and can be made to work nicely if you are diligent).
When you change an order in APO, and then publish the change to R/3, it is possible that the settings in R/3 will cause an issue with 'booking' the change. One way to test this is to manually make the same change, but directly in R/3. There should be no warnings or errors.
Another thing to look at are the Application logs on both sides (SLG1) for possible failures that may give a clue. Restrict to date and time interval where you know the proper update did not take place.
Rgds,
DB49

LSMW to upload data into "Note" in IT0024

Hi experts,
How can I upload data into field "Note" in IT0024.
Now I record PP02 to upload data into IT0024, but cannot find where to maintain "Note".
Could anybody give a help, please?
Thanks a lot!!
YF

just once, make sure to enter text in all lines that you may need in the recording.
in my example I have only entered text in one line (RSTXP-TDFIRST = 1):
This way all lines will be available to you.

Uploading data thru BDC into APPCREATE transaction

Hi,
I have used BDC to upload data in the tcode APPCREATE. When I see the uploading using the call transaction method, I am able to see that all the screens are getting populated correctly. But, When I check the result of the upload in APPSEARCH tcode, i am not able to see the completed status. Still the status is 'In Preparation'.
But manually, I am able to do that. I just want to find out if any keys needs to be activated/changed before doing the upload thru BDC.
Thanks & Regards,
Suresh

Hi,
I have used BDC to upload data in the tcode APPCREATE. When I see the uploading using the call transaction method, I am able to see that all the screens are getting populated correctly. But, When I check the result of the upload in APPSEARCH tcode, i am not able to see the completed status. Still the status is 'In Preparation'.
But manually, I am able to do that. I just want to find out if any keys needs to be activated/changed before doing the upload thru BDC.
Thanks & Regards,
Suresh

Master data updation not reflected in Bex report

Hi,
There is a field "Approver" in a report. It will only show the name of the Approver. And recently the same approver name has been changed in MDM system and now the problem is newly changed name is not reflecting the reporting. It shows the only old name in reporting.
My doubt is, what about already loaded record in BW system. Whether changes will be made for the older data. I mean it is possible to overwrite the approver name stored earlier in BW.
D Raj

Hi
Yes, master is always overwritten.
load the new value to the approver Info object.
in RSA1 -> right click --> activate master data.
Initially when data loaded, records will be Modified version. when you perform activate master data then M versions records will turn to A version.
records with A version are only visible in Report.
If your report is on Aggregates, then you have to perform ACR (attribute change run) to update the same new value in aggregate.
you can use the program RSDDS_AGGREGATES_MAINTAIN.
Regards,
Venkatesh

One business area data is not reflecting queries very urgent

we had two business areas under one chart of account .while executing the query the fig of one business area not reflecting in queries what could be the reason.
please i will assign full points give me best solution.Very urgent
Regards,
sampath

my friend kalpana,
data was ther.i will tell u clear picture
i am configuring fi general ledger accounting.
i ahave loaded line item data to 0figl_o02
and i have loaded leading ledger data to ofigl_o10 and ofigl_c10
when i am executing the query i cannot see the fig from one of our business area ACC.Only CRIS B AREA FIG COMING.
WHTA COULD BE THE REASON.pLEASE HELP ME OTHERWISE I WILL BE
in big trouble.i need to test the data.Please kalpana.....
Thanks & Regards,
Sampath

Universe export - data changes not reflecting in Report

Hi
The changes and the latest updates in the database are not reflecting in reports,
even if i export the universe again.
and i have refreshed the reports, that even not reflecting.
i did Edit query and Run query this action also not bringing the latest data to reports
why this happens ?
how to solve this issue ?
Regards
Dineshkumar

You can search for KB articles on SAP Service Market Place .
Here is first :
Symptom
You make changes a local Universe in Designer.
When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
Reproducing the Issue
Using BusinessObjects Desktop Intelligence XIR2 SP3:
Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
Make a simple change to the universe (like renaming a field/ object name) and save these changes.
Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
This will not show the latest changes.
However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
Cause
This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
Resolution
In Desktop Intelligence menu, go to: Tools > Universes
Click 'Refresh'
Select and 'Import' your universe
Next, go to toolbar menu: Data > Edit Data Provider
In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
Only after following these actions will the .unv ammendments be visible in the report.
Here is second :
Symptom
Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
Environment
BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
Reproducing the Issue
Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
1. Log in to Designer
i) Import Island Resort Marketing
ii) Go to Universe Parameter >> SQL
ii)Uncheck Allow Selection of Multiple Context
2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
i) Drag the object Country in the Result's Pane
ii) Save and Export the report to the repository.
3. In Designer Change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'ddd'
Note: Uncheck Allow Selection of Multiple Context
ii) Save and Export the Universe
4. Log in to InfoView
i) View the report
ii) Refresh the report
iii) Changes to the object taken place i.e Country is concatenated with ddd
5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'eee'
Note: Check Allow Selection of Multiple Context
ii) Save and Export the Universe
6. Log out from InfoView and login again
i) View the report
ii) Refresh the report
iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
Import efashion Universe
Drag the Outlet_Lookup table into the objects pane on the left hand side
Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019)
Apply the restriction to Administrator
Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
Create a new Deski report
Drag the object state from the Outlet_Lookup table to the Results pane
Observed that the administrator is able to see only Texas which is expected behavior
Save and export the report
Log in to Infoview as Administrator
View the report. Refresh the report
Observed that the administrator is able to see only Texas which is expected behavior
Log in to Infoview as any user say Test User
View the report. Refresh the report
Observed that Test User is able to see all the states which is expected behavior
In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
Save and export the Universe
Log in to Infoview as Test user
View the report
Refresh the Report
TestUser is able to see only Texas which mean that the restriction is applied to Test User also
Cause
This is by Design as the 'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
Resolution
Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Explanation:
If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Explanation:
The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
Explanation:
We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

Extracting data to datasource 0HR_PT_1, data does not reflect in structure.

I have already enhanced datasource 0HR_PT_1 to include the 4 fields I need from table T549Q (PABRJ PABRP BEGDA ENDDA) and I am trying to write the extract to move the data, but I seem to be having issues. The correct data is stored in an internal table with a header line, and it is also being looped through.I am doing a 'READ TABLE <itab> BINARY SEARCH and then a MOVE statement to move the fields from the internal table to the data source fields, along with a MODIFY table statement. The data is not populating, even though it is in the internal table, any suggestions?

DESCRIBE TABLE t_ptdw_pws LINES wa_line.
IF NOT wa_line IS INITIAL.
    SELECT pabrj pabrp begda endda
    FROM t549q
    INTO TABLE gt_t549q
    FOR ALL ENTRIES IN t_ptdw_pws
    WHERE permo = '98'
    AND   begda <= t_ptdw_pws-kday
    AND   endda >= t_ptdw_pws-kday.
    SORT gt_t549q by pabrj pabrp.
    LOOP AT t_ptdw_pws.
      CLEAR: gt_t549q, l_idx.
      l_idx = sy-tabix.
        READ TABLE gt_t549q with key t_ptdw_pws-zzpabrj
        BINARY SEARCH.
        t_ptdw_pws-zzpabrj = gt_t549q-pabrj.
        t_ptdw_pws-zzpabrp = gt_t549q-pabrp.
        t_ptdw_pws-zzpaybegda = gt_t549q-begda.
        t_ptdw_pws-zzpayendda = gt_t549q-endda.

LSMW Recording method is not working for transaction code FBL5N

Hi Experts,
I am trying to prepare LSMW to create dispute cases for customer line items through LSMW Recording method. When i was trying to do through SHDB Recording its working properly through Program. But its not working through LSMW Recording method means its not executing to next screen, immediately its displaying session completed screen.
Please do let me know any soution for this.
thanks,
Sriram.

Hi Sriram,
If my memory serves me correctly, a BDC will not work correctly with a list. This is mentioned somewhere in the SAP help pages.
Now I am not familiar on how to create dispute cases but using FBL5N does not sound to me the way to go. I assume that you use FBL5N in order to determine to which documents to link the dispute to, however you should be able to get the requested info from the BSID/BSAD tables.
Also in case you want to change the customer line item in the accounting document, check the data transfer workbench (SXDA) as SAP delivers a standard program for this.
Kind regards,
Robert
Edited by: RJ. Schamhart on Jan 14, 2011 12:35 AM
Edited by: RJ. Schamhart on Jan 14, 2011 12:43 AM

Business object data is not reflecting in data control

Hi
I am new to BPM i have a scenario to expose the Business objects(created in my own not from XSD) into data control while updating the any attribute in the business object,but it's not happening while i am trying this scenario.
can some please help me ASAP

I think what you're referring to is that you've generated an ADF user interface based on one of your human tasks and that human task took as input one of your processes variables that was based on a BPM Object you created from scratch and you've updated the BPM Object and are not seeing the update reflected in your Data Control.
In the simplest case, this might work:
1) Open the Application Navigator tab
2) Click the refresh icon to the right of the "Data Controls" title in the tab
3) Inside the Data Control tab, right mouse click the specific data control that is based on the human task and the XSD (the one you want to refresh) -> click "Edit Definition" -> click "Refresh Data Control".
If that doesn't work, open your ADF project's "DataControls.dcx" file. This file hard codes the location of the corresponding human task file (.task) and the schema file (.xsd).

Application Parameter not reflected in Transaction Iview.

Hi All,
I have a requirement where i have to create the Transaction Iview for the Report which is created using the Report Writer.
When i am giving the application parameter to it. It is not being reflected in the Portal.
Also when i cross checked with the any Z Report its taking the application parameter and executing successfully.
So is there any other settings for the Report which are created usng SAP Report Writer.
If anybody has done this type of Iview then tell me .
Regards,
Dhruv Shah

Dhruv,
check this thread
https://forums.sdn.sap.com/click.jspa?searchID=17849404&messageID=6257633
Thanks
Bala Duvvuri

Role Assignment date is not reflected properly

Hi All,
I have OIM 11.1.1.5.0 version installed on my machine. In it, whenever I create a new user and assign some role to him, the role assignment date is coming as the date on which the role was created in OIM setup and not the day on which the role was assigned to the user. I think there's something wrong here. Can someone please help me with the same? Not understanding what to check or how to proceed.
Thanks,
$id

Hi Nishith,
I checked the values of the usg_create in the usg table as suggested by you. And surprisingly it has the correct value in it. 20-DEC which was today. However in the self service profile page of the same user in the My Roles tab, the Role Assignment date is shown as 09 November. Can you please help me with whatever is wrong here?
Thanks a lot,
$id

Report data does not reflect the SQL Query?

Hi,
I have a report which does not seem to be processing all records returned from the database. When I run the SQL Query produced by crystal manually against the SQL Server all data is returned correctly in crystal not. Does this mean my links are not set up correctly in the Database Expert? or is there another issue, I use a Crystal Syntax selection formulae which is based on a couple of paramters to filter the database records.
Help is appreciated
K

<p>I agree with Rahul on checking the record count on the report vs. the record count from the query. Conditional suppression and Group selection formula will hide records that are actually being returned.</p><p>It sounds like (from your question) that you are using the database linking expert in CR. You can also check the SQL that CR is sending by going to Database -> Show SQL Query... compare this with the query you are using for validation, this will give you some clues as to whether your linking structure has an issue. </p>

LSMW upload - data doent not reflect in transaction

Similar Messages

Maybe you are looking for