LSMW use in IDOC

Guys,
Can anyone please give me some documnetation of IDOC's use in LSMW?
thanks

Which is the idoc type you need to use .Generally in LSMW we use standard idoc types.If you are seking the documentation for the purpose of learning than the links provided would be suffice .In the maintain object attributes please do provide in the message type and basic type.These you can serach in transaction we30/we31.
Before running LSMW process the idoc inbound processing by going into extras-->activate idoc inbound processing -> activate the port (we21)-->maintain the partner profiles (we20) .Check for test in transaction code we05 see whether the satus is 53(sucessgreen) or not.
The important part is mapping and rules if you are correct than you can easily run in the job.Hardly any of the client uses customized idoc type since almost all idoc types are there in SAP ECC 6.0 to take care.The challenges you will face when you deal with item conditions.
Please do provide in the feedback to the forum once you are done through whether live application or learning.
Please never forget to award points whichever replies does help you .
Regards
Somnath

Similar Messages

How to use LSMW using the IDOC to upload and maintain cost center group

Hi Everyone,
Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.
reply would be greatly appreciated
Warm Regards

Hi Praveen,
There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this.
With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
Anyway, if you want to upload data directly to tables, read below thread:
["UPLOAD CSV FILE";
[how to upload .csv file into a custom table;
Regards,
Roger

Lsmw using ALE/IDOC Method

Hi Team,
I am trying for lsmw using ALE/IDOC Method.
I have defined the segment type, message type, defined a basic type and defined a partner profile of the receiver system.
When i try to execute the Start Idoc Generation step in generating LSMW creation steps. I am getting below error "No partner exists with the nae ", type".
Please help me in resolving the warining.
No partner exists with the name '', type ''
Regards
Sunil
Edited by: sunil kumar on Jul 30, 2009 11:26 AM

Hi,
for LSMW , you have to create partner profile type as 'US'.
once the partner profile created in we20,
goto tcode lsmw , in menu select "Settings -> Inbound Idoc Processing"
maintain FilePort, partner type and Partner number and then press Activiate Idoc Inbound pricessing.
Then you will not get this error message.
Regards,
Bhavana

Problems migrating data via LSMW using the IDoc method

Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markus

so apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM

Working on LSMW using IDoc method for processing Open Sales Orders

We are currently in middle of creation of a new instance of production for a different Business SBU. We are looking to utilise the LSMW tool using IDocs for uploading / transferring the open orders to the new box. If some one has worked on LSMW using IDocs, please get in touch and if you could share any documents on the process of utilising the LSMW tool using Idocs for any kind of conversions, it would be great. The following is a sample case.
1. Each order will have multiple segments with different qualifiers under various segments.
2. Multiple line items would be available under each order.
Issues we are currently looking to solve :
1. How do you manage to loop through the qualifiers during processing for the same segment.
2. How do you prepare the tool to recognise the multiple line items of the same order.
3. What kind of strategy needs to be used to create the input data file(s). Like, splitting the header and detail level information ?
Note : The volume of data we are looking at is somewhere around 40-60 thousand orders worldwide.
Thanks in Advance.

hI vikram check this link
and reward points if helpful
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.jt77.com/system-dynamics/model-01395.html

Creating a BP in CRM through LSMW using IDOC

I am trying to create a buss partner in crm through LSMW using IDOC:
Message Type: CRMXIF_PARTNER_SAVE_M
Basic Type: CRMXIF_PARTNER_SAVE_M02
I get an error: "No update is defined for BP role 000000".
I am also filling
IDENTIFICATIONCATEGORY: CRM001
IDENTIFICATIONNUMBER: 12345678
However i get this error only if the external ID does not exist in table BUT0ID.
otherwise if the external ID is present in table BUT0ID and the object task is "U"pdate, the BP is saved.
Has anybody worked on BP creation using IDOCs? If yes please guide me.

Hi,
This Check Box is required for Archiving Business Partners from the System. You can have a full idea about the same from the link below [Archiving Business Partners|http://help.sap.com/saphelp_crm60/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm]
Also have a look at the following [Introduction to Data Archiving (CA-ARC)|http://help.sap.com/saphelp_crm60/helpdata/en/8d/3e4c11462a11d189000000e8323d3a/frameset.htm]
Hope this helps.
Thanks,
Samantak.

Requesting all to help me how to create lsmw using idoc method

hi
thanx for ur answer
requesting every body in the forum to help me how to create lsmw using idoc method.
regards,
balaji

Hi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan

Create new LSMW using Idoc for HR master Data

Hi Guys,
I was wondering id someone could help me. I have started developing an LSMW, of which I have already
created the Object. I have also created the Maintain attributes and I have supplied the Message Type, Basic Type and activated the IDOC inbound processing after providing the appropriate information.
The question I have is in the "Maintain source structure" do I need to create a structure for data records
and a structure for header?
Can I do a recording for transaction     -
"PA30" ---> update infotype 6
                                                       |
IDOC   -
> infotype 0,1,2,6
I have previously created HR LSMW using recording, but I have not used the IDOC facility and I'm not
sure of the differences.
Does anyone have any documentation.
Regards,
Frank

Dear Frank,
For Idoc method need to do setting first.
Creating pratner profile,.....................etc.
then rest of the thing are same.
Best Regards,
Flavya

Problem in LSMW using IDOC in convert data step

Hi,
I am getting a Run-time error in CONVERT DATA step of LSMW using IDOC. The error diplayed is a syntax error. I am not able to figure out the error. Anybody having idea about this, please help me...
The data is read successfully.
Edited by: majualex on Nov 4, 2009 9:23 AM

Error in the ABAP Application Program
The current ABAP program "/SAPDMC/SAPLLSMW_OBJ_070" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1CADMC/SAP_LSMW_CONV_00000051
" in include "/1CADMC/SAP_LSMW_CONV_00000051 " in
line 25:
""." expected after "DATA"."
I think the pgm is standard ABAP program.....

LSMW using IDoc Method *Error :No partner exists with the name '', type ''*

Hi All,
I am a newbie. I am trying LSMW using IDoc Method.
I got an error when i executed Start IDoc Generation step: No partner exists with the name '', type ''
Could anyone tell what wrong I might have done,
Thank you,
Shiv Ram

Hi,
You have to setup your IDoc configuration in LSMW:
1) Enter the menu \Settings\IDoc Inbound Processing
2) Create a FILE port by clicking "Maintain Ports"
3) Create a logical system (LS) partner number by clicking "Maintain Partner Numbers"
4) Be sure your partner profile that you create is "Active" by clicking "Classification"
5) In the end click "Activate IDoc Inbound Processing" bottom.
Run your LSMW again. This time it shoud run wothout any problem.
Hope it helps.
Chang

Steps to migrate lsmw using Idocs

hello i need to migrate lsmw using idocs ?can anybody please tell me the ateps in idoc method
It's very urgent , help plz.
Thanks in Advance
jdkumar

goto--> lsmw.
settings--->idoc inbound processing
here enter file port, trfc port, partner name.
then follow below steps(as suggested above by a frnd)
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( Message type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign

Data Migration-LSMW using IDoc Method

Hi Friends,
I have contract relevant information in the form of a excel spreadsheet/tab delimited flat file.
This transactional data has information such as Header Data, Item Data and Sub Item data (BOM explosion).
I need to migrate this data from the flat file to the CRM application using the IDoc Method of LSMW.
/When I used the Batch Input Recording method, the item data was not captured during recording./
Kindly send me relevant information to [email protected]
Thanks in Anticipation
rgards,
Praveen

Hello Sven,
thanks for your comment. Unfortunatelly those both transactions do not exitst because I work on SAP CRM 7.0 instead of SAP ECC. I also looked for similar transactions in the table but didn't find anything.

Difference between lsmw using BAPI & lsmw using IDOC?

HI everybody
can anybody tell me difference between lsmw using BAPI & lsmw using IDOC?

IDocs and BAPI are very different, so it should be easy to choose between them depending on your requirements.
IDOCS
Advantages
System can work even if target system not always online. The IDoc will be created and sending will just continue once you get connected to the other system.
No additional programming required. You just need to set up the configuration.
Disadvantages
Receipt/processing on the target system may not be immediate.
The sending system has no way to know whether the target system actually received what you sent (unless you use ALE).
If there is no SAP standard IDoc available for your requirement, it's harder to create a customized IDoc than a customized BAPI.
BAPIS
Advantages
You can tell if your sending was successful or not
Sending to/processing on the other side is immediate
Easier to create your own BAPI than your own IDoc
Disadvantages
Will only work if you have an active online connection.
Some programming required to call the BAPI.
Others interface methods you might also want to consider are ALE and RFCs.

CU41, LSMW using IDOC

Hi,
I am using CNPMAS03 IDOC to create Configuration Profile (CU41 transaction). I am getting following error. I am unable to understand the reason.
not defined as a configurable object
Function module OBJECT_CHECK_ not found.
Please help me to understand and resolve this problem. Is there any other way to accomplish CU41 in LSMW. I tried batch input recording but it has problems in processing initial screen (FORM).
Thanks in advance.
Sachin

Naveen,
This is the error log.
>>> Start processing in API: CARD_CON_PROFILE_READ
Reading configuration profiles
Processing of Configuration profile started
not defined as a configurable object
>>> End of processing in API:
Function module OBJECT_CHECK_ not found
>>> End of processing in API:
Saving changes to assignments
>>> Start processing in API: CAMA_CON_PROFILE_MAINTAIN
Start maintaining configuration profile
Processing of Configuration profile started
not defined as a configurable object
>>> End of processing in API:
Regards,
Sachin

Partner profile in lsmw using idocs

Hii!
I have a requirement where i need to convert article master in SAP Retail. I am using LSMW using IDOC. I have followed all the steps of configuration like created a partner profile, a message type(zmsg_type), processcode etc.
However in LSMW Step: Start Idoc Generation , i get the foll. error:
<b>Create a partner profile for message type zmsg_type.</b>
Please help me with this.
Thanks.

Go to WE20 and then take your partner profile type from the left hand side and check you have assinged the message type in outbound or inbound parameter(in the right hand side).. if you have not then you will get this error.
Award if usefule
Prince

LSMW use in IDOC

Similar Messages

Maybe you are looking for