LSMW Vendor CIN Update

Dear Experts,
In our setup we are only using FI-AP (No MM) we have enhanced field CIN in general section of vendor. Currently we wanted to update CIN information on all the vendors for which I created LSMW. I noticed that when batch map is created there is no information about CIN field. In recording I have selected this field. Not sure where I am going wrong?
Looking for your assistance. Thanks in advance!
B/R
Prashant Rane
Vendor Master - CIN Field
Method used in LSMW
Recording steps
Conversion data steps
No information on batch map

Hello,
Any thoughts for mass update of Vendor master for email id?
Regards,

Similar Messages

  • LSMW Vendor Change (XK02) by IDOC CREAMS05?

    LSMW Vendor Change (XK02) by IDOC
    Hi,
    I have below queries for LSMW Vendor Change (XK02) by IDOC
    I am using idoc type CREMAS05  for vendor creation , Now i want to update (Change) the vendor using the idoc.
    1. will the IDOC type CREMAS05 work for vendor change (XK02) also?
    2. when i am executing the LSMW with the IDOC type CREMAS05, it is throughing an error Message no. WY181 "Account group in the IDoc is different  " "
    Diagnosis
    A change to the account group of a vendor master record cannot be made automatically.
    The vendor with number 2000000148 currently has account group Z001. However, the IDoc contains account group .
    Procedure
    Change the account group manually to  and then try to edit the IDoc
    Please help me.
    Thanks,
    Babumiya Mohammad
    <removed by moderator>
    Edited by: Thomas Zloch on Feb 17, 2012

    Hi Jürgen L.
    Thanks for you answer , Now it is working.
    Can you Please help  me for CONTACT PERSON (create/ change) upload for vendor using the IDOC type CREMAS05.
    which structure is appropriate for CONTACT PERSON in CREMAS05
    Thanks in advance,
    Babumiya Mohammad

  • I want IDOC for Vendor master updation ( XK01 &XK02 )

    Hi
    I want to do LSMW in IDOC method for this vendor updation.
    So I want IDOC for Vendor master updation ( XK01 & XK02 ).
    I want to do both create vendor and change also.
    Regards,
    Ravi
    Edited by: kandukuri ravi on Dec 1, 2008 2:56 PM

    Hi,
        For Vendor Master using IDoc's for LSMW,Use Message Type = CREMAS and Basic Type = CREMAS05.
    For Basic type 01,02,03...05 are versions which includes more fields in basic type so better use latest version.
    Hope it will help you.
    Regards,
    Sudhakar Reddy.A

  • Mass Change for Vendor CIN (excise) Details.

    Dear Masters,
    I have an issue to Mass change the Excise data in Vendors master (CIN) details.
    The concerned table is  (J_1IMOVEND) and the fields are 1) J_1IEXCD 2) J_1IEXRN 3) J_1IEXRG 4) J_1IEXDI
    Kindly let me know how can this issue be resolved.
    Thankx in Advance.
    MANOJ

    Hi,
    if mentioned tables are not included in MASS for B.Object LFA1, alternatively you can use SAP LSMW functionality for this. The simplest way is to make recording of the simple transaction for changing VENDOR CIN Details.
    Hope it helps.
    regards,
    w.

  • Return material to vendor-CIN scenario

    Hi gurus,
    1.Can i know the steps for returning the material to vendor after doing MIRO.-CIN involved
    2.Returning the material to vendor after paying  the vendor-CIN involved.
    regards
    murugan

    Hello Murugan,
                                Awnser for 1) see as u wabt to return the material to vendor , so as u had already made a GR & posted J1iex , so first of all cancell the GRN document , then Cancell the J1iex , , Now make a return P.O for htis there is acondition that the material u want to return to vendor should lie in unrestricted stock , now as ur Return P.o is made , release it & then do GR with respect to this Returm P.O with mvmt. type = 161, as these material is being return to vendor then the outgoing tax invoice should also be prepared so to do this use T.code -> J1IS here use ref. docu type as MATD, Give  GR NO, series group , here all excise duties are to be filled manually & save the invoice note down the no. of invoice, After this U have to post the invoice through -->J1IV , Now to take print out of this outgoing tax invoice u have to make a customised t.code as we have made it was --> ZRETURN here u can have print out of this invoice .
    Now for 2nd Question ---> post credit memo to vendorby t.code ---> MIRO if already paid .
    Pl reward for efforts , i had already  gone through this case .
    sap11

  • PO created by means of Workflow  with out Vendor master updates

    Hi  Friends,
       I  have my scenario like this. I am working with Production server. When ever a request is created, it has to be sent for Vendor master data updates. then only a PO has to be created. The problem is the PO is created and the workflow is completed with out vendor master updates. When i check through SWI6  the step is just skipped. In the graphical view the steps vendor master update i.e tru  descion and other wait step types are disappeared. but in the original workflow the steps are present. can any one pls help me in solving this?
    Thanks,
    Archana.

    Hi  Arghadip,
      Thanks for the reply. The process is like this :
       when once request is created , it will fetch the email id of the approver from LDAP
       Then 2 approval steps are there. first approval is not mandatory. second is mandatory and its having terminatting event.
      After this Amendment descion will be there. on rejection of this descion it has to go and update vendor master. Until the amendments the process is going on. after  this  vendor master update will be there . it includes wait steps to  finish the update. then PO has to be created. but  from vendor descion to wait event the steps are disappeared when i checked  in SWI6 for that user. pls help me.

  • NSS Hard Drive Approved Vendor List Updated

    http://www.cisco.com/en/US/products/ps9957/prod_technical_reference_list.html
    The approved vendor list has been updated and posted to the above link.
    This updates adds the Western Digital RE3 1TB drive to the Recommended Drive list.
    Also Hitachi drives that were previously approved but were left off the previous AVL list by mistake have been added back.

    NSS Hard Drive Approved Vendor List updated.
    Now supports Seagate 1.5TB Drives bring the total storage capacity to 6TB for NSS3000, NSS4000, and NSS6000 models.  NSS2000 can now support 3TB using the new 1.5TB drives.
    Updated PDF documentation with the part numbers are available on cisco.com
    http://www.cisco.com/en/US/products/ps9957/prod_technical_reference_list.html

  • No vendor addresses update in PO.

    No vendor addresses update in PO. how to solve this issue?

    Hi
    Check whether vendor is one time vendor or regular vendor .
    I it is one time vendor you have to give adderess in PO
    Edited by: Sanjay  Shah on Feb 3, 2010 2:09 PM

  • Trying to reinstall Canon MX882 printer, I get the message /System/Library/Extensions/AppleUSBEthernetHost.kext installed improperly and cannot be used.Try reinstalling or contact vendor for update. Where is this and what do I do/

    Trying to reinstall MX882 Canon printer after upgrading to OSX Mavericks. Printer will not print and I get a message "The system extension "/System/Library/
    Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Try reinstalling it, or contact vendor for update."
    What do I do and where is this extension?

    beverly216 wrote:
    What do I do and where is this extension?
    I would recommend you download and install the OS X 10.9.5 Combo Update.
    That file is part of the operating system and it is located where the error shows, i.e. HD > System > Library > Extensions. It would seem that when you updated, this file and maybe others have not updated correctly. So running the Combo Update may help resolve this.

  • Error:-While vendor master update

    Hi,
    Here issue is at the time of vendor master data update payment method is updated from DMT to DLP  .
    FK03 >> Environment  >> Account changes >>  All fields  >> All changes
    Shows other changes as home address,mobile number etc.
    Can anyone tell me why with payment term other changes are coming in change log even if it was not done moreover what could be the possible solution so other changes will not appear in the change log.
    Regards,
    Dharmesh

    Hey!!!
    What is the vendor master update error?

  • Vendor Email update via LSMW

    Hi Folks,
    Have a query regarding mass update for Vendor master email address.
    LSMW does not seem to work for
    a.) Batch Input recording
    b.) Standard batch/Direct input.
    Since Vendor email is not stored in LFA1 (rather in ADR6)
    Also, the email id is maintained in ADR6, XK99/MASS do not work. Hence this option too is ruled out.
    Any suggestions?
    Regards.

    Hello,
    Any thoughts for mass update of Vendor master for email id?
    Regards,

  • LSMW - Vendor Master DATA - IBAN management

    Dear SAP guru's,
    I'm trying to integrate the IBAN in vendor master data with my LSMW (batch recording techno).
    unfortunately, I do not have the IBAN information in structure BLFBK
    BLFBK Vendor Master Record Bank Data (Batch Input Structure)
    DO you know how we can integrate an IBAN by LSMW? Batch recording seems to be too risky..
    And I do not have the BBAN info, I only receive the IBAN...
    Thanks for your comments,
    Karim

    Hello,
    With batch, it is not possible to have IBAN details updated in Vendor master data. This should be done manually, when the IBAN
    number is entered system will do the validation checks as per the legal requirements using the specific Function modules for each country.
    Nevertheless, there is batch input program RFBIKR00 which is used for processing the following data:
    - Creating and changing vendor master data
    - Creating bank master data
    Please, note that the program RFBIKR00 cannot import master data which contains the usual account number and the IBAN at the same time. There has to be either an IBAN or an account number in the imported file.
    There are 2 scenarios how to get all the data imported, depending from
    the source system:
    1. If the source is also an SAP system, you can import the account numbers using the RFBIKR00 and then transport the IBANs separately using the ALE distribution (RFIBAN_ALE).
    2. If the source is a non SAP System, then file contains always two entries for a payment instruction. In the first one the account number will be imported, in the second one the IBAN. The functionality "IBAN without account number" is prerequisited and has to be active in the target system. In this scenario 2 payment instructions would be created in the vendor master(LFBK), one with the account number, another one with the IBAN.
    I hope this helps to resolve the problem.
    Thanks and regards,
    Suresh Jayanthi.

  • Lsmw - vendor master

    Hi!
    I need to import vendor data with lsmw and I wanted to use 'Standard Batch Input' (vendor master). The problem is that for the address data I can only find the address fields in the BLFA1 structure, but I have to use a structure like ADRC. Is there any way to find this structure or do I have to use 'Batch Input Recording'?
    thanks

    Hi,
    You will have to use batch input recording. I had the same issue with functional locations addresses. You can define it in separate process, just for addresses, as vendor update (FK02).
    Regards,
    Eli

  • Vendor Mass Update

    Hello SRM Folks,
    We want to do mass update for vendors (Updating proxy bidding flag in Manage Business Partner) since we have 3000  vendors.  It will be highly complex to update it manually. Could any one of you have gone through such experience then please share  with us. 
    Is it possible to use LSMW or eCatt to update proxy bidding flag on vendor master (Transaction  BBPMAININT)
    Please let me know.
    Thanks,
    Amit

    Hi. Is the data you want available in transaction BP?
    If it is you should be able to use ecatt.
    Failing that you could try function BUPA_CENTRAL_CHANGE with ecatt, or a custom program.
    You could also try BBPMAININT, but I am not sure if you will be able to call the service trnasaction in the GUI using ecatt.
    Regards,
    Dave.

  • LSMW, CREMAS04, and updating Partner Functions

    I am involved with converting legacy data into SAP. To populate the SAP Vendor Master correctly will involve 3 passes using LSMW:
    Pass #1: use IDOC CREMAS04 and populate the majority of master record fields
    Pass #2: use BAPI: Business Object "BUS4001"; Method "SAVEREPLICA"; Message Type "ADRMAS"; Basic Type "ADRMAS03" to update Vendor record address data.
    Pass #3: use IDOC CREMAS04 and update Head Office, Alternate Payee, and related Partner Function data.
    The problem I am having is best explained using the following example:
    When a vendor record (ex: Vendor Number 300004) is first created, the following 3 Partner Functions are also created automatically to reference the same vendor number: OA, VN, & PI (Ordering Address, Vendor, & Invoicing Party):
    OA    Ordering Address    300004   Vendor A
    VN    Vendor                   300004   Vendor A
    PI      Invoicing Party        300004   Vendor A
    This particular vendor is actually one of many "plants" or "warehouses" of a larger vendor, and I need to configure the record to reflect that the Purchase Orders go to the Parent Vendor (Head office) and that the Invoice comes from the same source. Therefore, I need to remove or edit the existing OA and PI partner functions so that I only end up with the same 3 Partner Functions, but the linked vendor record for partner functions OA and PI needs to be that of Head Office.
    Example: if using Vendor Number 300005 "Head Office Vendor"
    OA    Ordering Address    300005   Vendor A
    VN    Vendor                   300004   Vendor A
    PI      Invoicing Party        300005   Vendor A
    What I am actually seeing when I post the IDOC is the following:
    OA    Ordering Address    300004   Vendor A
    OA    Ordering Address    300005   Vendor A
    VN    Vendor                   300004   Vendor A
    PI      Invoicing Party        300004   Vendor A
    PI      Invoicing Party        300005   Vendor A
    Can anyone shed some light on this?

    Don,
    I am trying to work with the same data that you discussed in this thread.  Can you send me some additional details on your Pass #2?  I was successful in Pass #1, particularly in adding new PI vendors when necessary and deleting the existing internally created PI vendors.  But I'm stuck on Pass #2 where I want to add the extended address information that you mention using the SAVEREPLICA BAPI.  I can certainly use the recording method, but would like to leverage the power of the BAPI approach.
    Thanks in advance!
    Wes

Maybe you are looking for