LSMW with BAPI for Person's Qualification Profile - BAPI_QUALIPROF_CHANGE

All,
I tried to use BAPI 'BAPI_QUALIPROF_CHANGE' to upload the qualification profile for an employee. The corresponding object type for the function module is BUS7017 (& the method is CHANGE). But in standard SAP, in the initial LSMW attributes screen, it supports only those objects with an ALE interface. But, BUS7017 does not have an ALE interface.
It is possible to create an ALE interface for a BAPI in the transaction 'BDBG'. After creating an interface, I get the business object in the F4 help for the Business object (LSMW attributes screen). But, I get an error in the step 'Maintain structure relations'. It is saying 'target structure could not be found'.
Can you please tell me what I am missing here. Also let me know how to generate a function module for the inbound/outbound processing of an ALE with BAPI?
Thanks in advance.
Regards,
Parvath.

Hi,
Did u get any solution to this . I am trying to upload cost centers and facing the same problem. If you have found any solution , please pass it.
Sutapa

Similar Messages

LSMW with BAPI for BAPI_CONTRACT_CREATE

Hi,
I am using LSMW with BAPI for creating purchasing contract.
I got status of the Idoc as " 64 " means Idoc is ready to transferred to application but when i go to next step ...
I am getting dump when I executing the step "Start Idoc Processing"
The errors shows like this: - "Object cannot be assigned to null"
Any help on this:-

yes ..
I can see the data into the idoc.
But when processing this idoc into application...then going into dump.
Any ideas...Please let me know.

How to do the lsmw with bapi?

hi
while upload the vendor master data using (xk01) from nonsap to sap
how to do the lsmw with bapi? pls could u give the steps with scren shot to me.
regards
eswar.

Hi
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
<b>Reward points for useful Answers</b>
Regards
Anji

Hi All, lsmw with bapi

I am trying to do LSMW with BAPI for transaction mm01. can anybody tell me how to do that, with steps.
Thanks
Ganesh vidyarthi

Hi Ganesh
Please check the following Links
https://forums.sdn.sap.com/click.jspa?searchID=274344&messageID=2796820
https://forums.sdn.sap.com/click.jspa?searchID=274344&messageID=2532904
https://forums.sdn.sap.com/click.jspa?searchID=274344&messageID=2124208
https://forums.sdn.sap.com/click.jspa?searchID=274344&messageID=282539
https://forums.sdn.sap.com/click.jspa?searchID=274344&messageID=2549249

LSMW with bapi BAPI_REQUISITION_CREATE

Hi
I'm creating an LSMW for create purchase requisition with Bapi (BAPI_REQUISITION_CREATE)
I'm trying to upload 2 items for a PR but the LSMW is creating 2 PR with each item.
How can I tell to the LSMW that I have to item for the same PR?
Remember this bapi doesn't has header.

Hi,
you need to define hierarchy in your in put file to merge required lines into one BAPI call. You can find some examples how to create order with multiple items (for example [this one|http://www.scribd.com/doc/6646673/Lsmw-With-Bapi]). So you can easily adapt it to your BAPI.
Cheers

While LSMW   with BAPI method doing is any prerequisite required.

Hi,
When i entered the business object in lsmw   with bapi method.
i am getting the error messge is enter the valid value. when i press f4 its showing the object.but when   enter the method its giving the error messge is enter the value. when i checked through BAPI tcode its avaliable.
Object name is BUSISM007.
method is CREATEFROMDATA.
if anybody knows it would be helpful.
regards
Diva

check it BUSISM007---->not found
Maintain the default values for IDoc inbound processing..
in initial screen of lsmw(project, subproject)..
    setting--->idoc inbound processing

I want to upload material master (MM01) using LSMW with BAPI method

I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar n

Hi,
The business object is BUS1001.
Thanks,
Murali

EDI_SEGMENTS_ADD_BLOCK is empty - LSMW with BAPI

Hi everybody!
I'm trying configure a LSMW with BAPI, but when I try to do the step "Start IDoc Generation" I receive the message "EDI_SEGMENTS_ADD_BLOCK is empty".
I already configured the Ports, Partner Type and Partner Number, but I am still receiving the message.
My Example Scenario is:
- A test LSMW to change flight table using the BAPI "BAPI_FLIGHT_SAVEREPLICA".
- The Port is FILE type and the file is local (PC).
-The Partner Type is LS.
- The Partner Number is using FLIGHT_SAVEREPLICA message type in Inbound parameters.
Anybody knows the possible cause of this?
Tks

After search I tried many things to solve it, in the end I just rebuild the LSMW step by step again and the problem does not appeared again...

Send me the step step process of LSMW with BAPI

hI
Plz send me realetd document that expalins step step process of LSMW with BAPI
Thanks

http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf

BAPI for Creation Of Catalog Profile - TCODE OQN6

Hi All,
Is there any BAPI to create the catalog profile (like Catalog Groups & Codes BAPI - BAPI_QPGR_SAVEREPLICA ).
Reagrds,
Sridhar.M

Hi
Check Tcode: IBIP. and LSMW method and below link it may be helpful.
[link|Re: LSMW for uploading equipment.]
Thanks,
Asit Purbey.

BAPI for update field marc-profil (backfl.profile, mrp4)

G'day!
What bapi will update field marc-profil (backfl.profile, mrp4)?
Thank you!

Anupam Sharma wrote:
You can use the T code MM17/ MASS for your requirement .
BAPI need for transfer data from non SAP PLM system.

Lsmw with Bapi Step by Step

Hi,
Please tell me step by step lsmw recording method with bapi.
it's argent.

Hi,
Check this
https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=lsmw+tutorial&objid=f50&daterange=last90days&numresults=15
aRs

There is no option on iPhone 4 with O2 for personal hotspot. I do have a contract and O2 after a lot of discussion and updates said I should contact Apple for help

I have and iPhone 4 with the latest 4.3.3 software and have confirmed with O2 I have the personal hotspot option contract. After 2 days of reloading the software on hard and soft resets, I still do not have an option on my phone for personal hotspot or tethering. O2 suggested I now try Apple for help. Any suggestions?

On your phone, Settings>General>Reset>Reset Network Settings...does Personal Hotspot appear now?

Bapi for Project User Status Profile

Hi,
Is there any bapi that contains the field "Status Profile (STSMA) of the Project? I only can find the WBS status...
Thanks in advance.
LM

Hi,
Thanks for your reply.
But this function is to get the status... The problem is when creating a project by BAPI, the "user status profile" field (STSMA) is not available to fill. In this case, it happens if we have 2 schemes for projects, the bapi only puts the first that appears and I want the 2nd one to be fullfilled.
How can we create a projet by bapi and have this field?
Thanks in advance,
LM

Help need with bapi for mb1a

Hi all,
iam creating a good movement with 201 using bapi. I created manually with the data in the t code MB1A. LATER I TRIED WITH THE SAME DATA IN PROGRAM BY PASSING THROOUGH bAPI
BUT FOR SOME REASON IAM GETTING AN ERROR SAYING
EKI                  222Cost center ABCD/12345 does not exist on 03/28/2007.
but this cost center is valid till 9999. I never passed ABCD what is that?
I TRIED WITH SAME COST CENTER IT WORKED WHILE CREATE MANUALLY WITHT THE SAME DATA IN mb1a T-CODE.
tHIS IS MY CODE LET ME IF IAM MISSING ANYTHING
data: gm_header type bapi2017_gm_head_01.
data: gm_code    type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item    type table of
                 bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0 with header line.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear: gm_return, gm_retmtd. refresh gm_return.
Setup BAPI header data.
gm_header-pstng_date = sy-datum.
gm_header-doc_date   = sy-datum.
gm_code-gm_code      = '03'.                                " MB1A
Write 971 movement to table
clear gm_item.
move '201'                 to gm_item-move_type     .
move '90998' to gm_item-material.
move '1'     to gm_item-entry_qnt.
MOVE 'EA'    TO GM_ITEM-ENTRY_UOM.
move 'PNT' to gm_item-plant.
move 'PPNT' to gm_item-stge_loc.
*MOVE '0901'   TO GM_ITEM-MOVE_REAS.
move '12345' to gm_item-COSTCENTER.
append gm_item.
Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
     exporting
          goodsmvt_header = gm_header
          goodsmvt_code    = gm_code
     importing
          goodsmvt_headret = gm_headret
          materialdocument = gm_retmtd
     tables
          goodsmvt_item    = gm_item
          return           = gm_return.
if not gm_retmtd is initial.
commit work and wait.
call function 'DEQUEUE_ALL'.
else.
commit work and wait.
call function 'DEQUEUE_ALL'.
endif.
write:/ gm_retmtd.
loop at gm_return.
write:/ gm_return.
endloop.
Thanks

Hi,
Iam abale to create a goods issue with the same data.
The only difference i see when i create through MB1A, in the initial screen i see the collective slip has been selected and in the second when i give the cost center and hit enter it brings up the buisness area and then when i save it it creates a document number.
I tried passing the buisness area but iam getting same error.
If it work through mB1A then it should work through the BAPI RIGHT?
tAKE A LOOK AT MY BAPI CODE AND LET ME KNOW IF IA M MISSING ANYTHING IN HERE
tHANKS

LSMW with BAPI for Person's Qualification Profile - BAPI_QUALIPROF_CHANGE

Similar Messages

Maybe you are looking for