Lsmw with direct input

hi,
iam getting error in 11th step create batch input session for ie01 t-code.converted data is displaying
but batch input session is not getting created for object 0400 method 0001 for pgm name ibip.plz help me out.
thanks.

Hi Komal
Have you deleted First Line in text File...
One Of the reason for this error is if u dont delete First Line in Text File....
try this....
Check for blanks in Excel...
Check for Source Fields..
Also Check any Unnecessary Space is there in ur excel file......
Regards
Smitha
Edited by: Smitha KB on Feb 25, 2009 1:08 PM
Edited by: Smitha KB on Feb 25, 2009 1:14 PM

Similar Messages

Problem with direct input program while uploading data into database

TABLES: BGR00, " Mappensatz
 BMM00, " MM01/MM02 BTCI-Kopfdaten
 BMMH1, " MM01/MM02 Hauptdaten
 BMMH2, " Länderdaten (Steuern)
 BMMH3, " Prognosewerte
 BMMH4, " Verbrauchswerte
 BMMH5, " Kurztexte
 BMMH6, " Mengeneinheiten
 BMMH7, " Langtexte
 BMMH8. " Referentielle EAN's
 Satztypen
DATA: MAPPENSATZ LIKE BMM00-STYPE VALUE '0',
 KOPFSATZ LIKE BMM00-STYPE VALUE '1',
 HAUPTSATZ LIKE BMM00-STYPE VALUE '2',
 KUN_SATZ LIKE BMM00-STYPE VALUE 'Z',
 LANDSATZ LIKE BMM00-STYPE VALUE '3',
 PROGSATZ LIKE BMM00-STYPE VALUE '4',
 VERBSATZ LIKE BMM00-STYPE VALUE '5',
 KTEXTSATZ LIKE BMM00-STYPE VALUE '6',
 MESATZ LIKE BMM00-STYPE VALUE '7',
 TEXTSATZ LIKE BMM00-STYPE VALUE '8',
 EANSATZ LIKE BMM00-STYPE VALUE '9'.
Common Data Bereich fuer die extern aufgerufenen Routinen
 Initialstrukturen
DATA: BEGIN OF COMMON PART RMMMBIMY.
DATA: BEGIN OF I_BMM00.
 INCLUDE STRUCTURE BMM00. " Kopfdaten
DATA: END OF I_BMM00.
DATA: BEGIN OF I_BMMH1.
 INCLUDE STRUCTURE BMMH1. " Haupdaten
DATA: END OF I_BMMH1.
DATA: BEGIN OF I_BMMH2.
 INCLUDE STRUCTURE BMMH2. " Länderdaten
DATA: END OF I_BMMH2.
DATA: BEGIN OF I_BMMH3.
 INCLUDE STRUCTURE BMMH3. " Prognosewerte
DATA: END OF I_BMMH3.
DATA: BEGIN OF I_BMMH4.
 INCLUDE STRUCTURE BMMH4. " Verbrauchswerte
DATA: END OF I_BMMH4.
DATA: BEGIN OF I_BMMH5.
 INCLUDE STRUCTURE BMMH5. " Kurztexte
DATA: END OF I_BMMH5.
DATA: BEGIN OF I_BMMH6.
 INCLUDE STRUCTURE BMMH6. " Mengeneinheiten
DATA: END OF I_BMMH6.
DATA: BEGIN OF I_BMMH7.
 INCLUDE STRUCTURE BMMH7. " Textzeilen
DATA: END OF I_BMMH7.
DATA: BEGIN OF I_BMMH8.
 INCLUDE STRUCTURE BMMH8. " Referentielle EAN's
DATA: END OF I_BMMH8.
DATA: END OF COMMON PART.
DATA: WA LIKE TEDATA-DATA.
 Einzelfelder
DATA: GROUP_COUNT(6) TYPE C, " Anzahl Mappen
 TRANS_COUNT(6) TYPE C, " alte Definition für rmmmbim0
 SATZ_COUNT LIKE MUEB_REST-TRANC, " Trans.zähler neu
 H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
 SATZ2_COUNT(6) TYPE C. " Anz. Sätze je Trans. ohne Kopfsatz
DATA: XEOF(1) TYPE C, " X=End of File erreicht
 XHAUPTSATZ_EXIST TYPE C, " X=Hauptsatz zum Kopf exi.
 NODATA(1) TYPE C. " kein BI für dieses Feld
mk/15.08.94:
DATA: GROUP_OPEN(1) TYPE C. " X=Mappe schon geöffnet
*eject
 Konstanten
DATA: C_NODATA(1) TYPE C VALUE '/'. " Default für NODATA
DATA: MATNR_ERW LIKE MARA-MATNR VALUE '0 '.
DATA: MATNR_ERW_INT LIKE MARA-MATNR. "internal sight of '0 '
DATA: MATNR_LAST LIKE MARA-MATNR. "Material number
mk/11.08.94 2.1H:
If this flag is initial, the database updates will be done directly
during background maintenance instead of using a separate update
task. (no usage of this flag in dialogue mode!)
DATA: DBUPDATE_VB(1) VALUE ' '. "note 306628
data: matsync type mat_sync. "wk/99a no update in dialog if called
***INCLUDE ZMUSD070.
TABLES: MARA, "Material Master: General Data
 MARC, "Material Master: C Segment
 MARD, "Material Master: St Loc/Batch
 MBEW, "Material Valuation
 MVKE, "Material Master: Sales Data
 MLGN, "Material Data per Whse Number
 MLAN, "Tax Classification: Material
 T001W, "Plants/Branches
 TBICU.
DATA: BEGIN OF VALUTAB OCCURS 0.
 INCLUDE STRUCTURE RSPARAMS.
DATA: END OF VALUTAB.
DATA: BEGIN OF VARTECH.
 INCLUDE STRUCTURE VARID.
DATA: END OF VARTECH.
DATA: PARMS LIKE ZXXDCONV.
DATA: REC_COUNT TYPE I,
 REC_COUNT_BAD TYPE I,
 ZJOBID LIKE TBIZU-JOBID,
 ZJOBCOUNT LIKE TBIZU-JOBCOUNT,
 ZMATNR LIKE MARA-MATNR,
 ZTEXT(80) TYPE C.
CONSTANTS: LIT_ZERO(18) TYPE C VALUE '000000000000000000',
 LIT_CHAR TYPE C VALUE '_',
 LIT_CREATE LIKE BMM00-TCODE VALUE 'MM01',
 LIT_CHANGE LIKE BMM00-TCODE VALUE 'MM02',
 LIT_CHECK(1) TYPE C VALUE 'X'.
DATA: BEGIN OF INP_DATA OCCURS 0,
 MATNR(18) TYPE C, " Material code
 UMREN(6) TYPE C, " Denominator
 MEINH(3) TYPE C, " Alternate UOM
 UMREZ(6) TYPE C, " Numerator
 END OF INP_DATA.
*eject
SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (13) TEXT-004.
PARAMETERS: P_PC RADIOBUTTON GROUP SRC DEFAULT 'X'.
SELECTION-SCREEN COMMENT (6) TEXT-005.
PARAMETERS: P_UNIX RADIOBUTTON GROUP SRC.
SELECTION-SCREEN COMMENT (6) TEXT-006.
PARAMETERS: P_DS_TYP LIKE ZXXDCONV-DS_TYP
 DEFAULT 'ASC'.
SELECTION-SCREEN END OF LINE.
*SELECT-OPTIONS: S_PATH FOR PARMS-PATH
 NO INTERVALS
 LOWER CASE.
PARAMETERS: P_PATH TYPE RLGRAP-FILENAME.
PARAMETERS: P_HDRLIN LIKE ZXXDCONV-HDR_LINES
 DEFAULT 0,
 P_JOBNAM LIKE TBICU_S-JOBNAME
 MEMORY ID BM1,
 P_DI_EXE AS CHECKBOX
 DEFAULT LIT_CHECK,
 P_MAPPE LIKE BGR00-GROUP
 DEFAULT 'MRP_UOM_LOAD'
 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK INOUT.
*eject
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 PROGRAM_NAME = SYST-REPID
 DYNPRO_NUMBER = SYST-DYNNR
 FIELD_NAME = 'P_PATH'
 CHANGING
 FILE_NAME = S_PATH-LOW
 FILE_NAME = P_PATH
 EXCEPTIONS
 MASK_TOO_LONG = 1
 OTHERS = 2.
AT SELECTION-SCREEN.
Set up parameter record
PARMS-UNIX = P_UNIX.
PARMS-PC = P_PC.
PARMS-DS_TYP = P_DS_TYP.
PARMS-JOBNAME = P_JOBNAM.
PARMS-MAPPE = P_MAPPE.
PARMS-HDR_LINES = P_HDRLIN.
*eject
 Main Processing Routine *
START-OF-SELECTION.
Initialization
PERFORM 0000_HOUSEKEEPING.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
Process input files
SORT S_PATH BY SIGN OPTION LOW.
 MOVE S_PATH-LOW TO PARMS-PATH.
 MOVE P_PATH TO PARMS-PATH.
LOOP AT S_PATH.
 AT NEW LOW.
 CLEAR INP_DATA.
 REFRESH INP_DATA.
Read source data into internal table
 PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
Processs each record in internal table
 ZTEXT = TEXT-007.
 ZTEXT+13 = PARMS-DS_NAME.
 PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
 LOOP AT INP_DATA.
Reset tables for each record
 BMM00 = I_BMM00.
 BMMH1 = I_BMMH1.
 BMMH6 = I_BMMH6.
Load structures with data
 MOVE-CORRESPONDING INP_DATA TO BMM00.
 PERFORM 2000_WRITE_OUTPUT USING BMM00.
 MOVE-CORRESPONDING INP_DATA TO BMMH1.
 PERFORM 2000_WRITE_OUTPUT USING BMMH1.
 MOVE-CORRESPONDING INP_DATA TO BMMH6.
 PERFORM 2000_WRITE_OUTPUT USING BMMH6.
 REC_COUNT = REC_COUNT + 1.
 ENDLOOP.
 ENDAT.
ENDLOOP.
IF REC_COUNT GT 0
AND P_DI_EXE EQ LIT_CHECK.
 PERFORM 3000_START_DI_JOB.
ENDIF.
WRITE: / TEXT-008,
 REC_COUNT.
PERFORM 9000_END_OF_JOB.
*eject
Include containing common routines used by direct input programs
INCLUDE ZMUSD071.
*eject
 FORM 0500_INIT_BMM00 *
 Initialize I_BMM00 with transaction code and views selected *
FORM 0500_INIT_BMM00.
***this changes done by samson**
if not inp_data[] is initial.
select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
if sy-subrc = 0.
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
else.
I_BMM00-TCODE = LIT_CREATE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
endif.
endif.
**this changes above done by samson**
Transaction code
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
ENDFORM.
INCLUDE ZMUSD069.
*eject
 FORM 0000_HOUSEKEEPING *
 Initialization routines *
FORM 0000_HOUSEKEEPING.
PERFORM 0010_LDS_NAME.
PERFORM 0020_DS_NAME.
PERFORM 0030_OPEN_FILE.
PERFORM 0040_INIT_STRUCTS.
ENDFORM.
*eject
 FORM 0010_LDS_NAME *
 Obtain logical file name from DI job details *
FORM 0010_LDS_NAME.
Check valid job name
SELECT SINGLE * FROM TBICU
 WHERE JOBNAME EQ PARMS-JOBNAME.
IF SY-SUBRC EQ 0.
 CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
 EXPORTING
 REPORT = TBICU-REPNAME
 VARIANT = TBICU-VARIANT
 IMPORTING
 TECHN_DATA = VARTECH
 TABLES
 VARIANT_VALUES = VALUTAB
 EXCEPTIONS
 VARIANT_NON_EXISTENT = 1
 VARIANT_OBSOLETE = 2
 OTHERS = 3.
 IF SY-SUBRC EQ 0.
 READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
 MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
 ELSE.
 MESSAGE I001 WITH PARMS-JOBNAME.
 MESSAGE A099.
 ENDIF.
ELSE.
 MESSAGE I000 WITH PARMS-JOBNAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 0040_INIT_STRUCTS *
 Initialize structures for direct input records *
FORM 0040_INIT_STRUCTS.
Start of standard SAP initialization from example program RMMMBIME
*------- Write session record -
CLEAR BGR00.
BGR00-STYPE = MAPPENSATZ.
BGR00-GROUP = PARMS-MAPPE.
BGR00-NODATA = C_NODATA.
BGR00-MANDT = SY-MANDT.
BGR00-USNAM = SY-UNAME.
BGR00-START = BGR00-NODATA.
BGR00-XKEEP = BGR00-NODATA.
PERFORM 2000_WRITE_OUTPUT USING BGR00.
*----- Initialize structures -
NODATA = BGR00-NODATA.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
End of standard SAP initialization from example program RMMMBIME
ENDFORM.
*eject.
 FORM 3000_START_DI_JOB *
 Start direct input job *
FORM 3000_START_DI_JOB.
ZTEXT = 'Starting '(021).
ZTEXT+9 = TBICU-JOBNAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
CALL FUNCTION 'BI_START_JOB'
 EXPORTING
 JOBID = ' '
 JOBTEXT = TBICU-JOBNAME
 REPNAME = TBICU-REPNAME
 SERVER = TBICU-EXECSERVER
 VARIANT = TBICU-VARIANT
 NEW_JOB = 'X'
 CONTINUE_JOB = ' '
 START_IMMEDIATE = 'X'
 DO_NOT_PRINT = 'X'
 USERNAME = SY-UNAME
 IMPORTING
 JOBID = ZJOBID
 JOBCOUNT = ZJOBCOUNT
 EXCEPTIONS
 JOB_OPEN_FAILED = 1
 JOB_CLOSE_FAILED = 2
 JOB_SUBMIT_FAILED = 3
 WRONG_PARAMETERS = 4
 JOB_DOES_NOT_EXIST = 5
 WRONG_STARTTIME_GIVEN = 6
 JOB_NOT_RELEASED = 7
 WRONG_VARIANT = 8
 NO_AUTHORITY = 9
 DIALOG_CANCELLED = 10
 JOB_ALREADY_EXISTS = 11
 PERIODIC_NOT_ALLOWED = 12
 ERROR_NUMBER_GET_NEXT = 13
 OTHERS = 14.
IF SY-SUBRC EQ 0.
 WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
ELSE.
 WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
ENDIF.
FORM 0020_DS_NAME.
CALL FUNCTION 'FILE_GET_NAME'
 EXPORTING
 CLIENT = SY-MANDT
 LOGICAL_FILENAME = PARMS-LDS_NAME
 OPERATING_SYSTEM = SY-OPSYS
 IMPORTING
 FILE_NAME = PARMS-DS_NAME
 EXCEPTIONS
 FILE_NOT_FOUND = 1
 OTHERS = 2.
IF SY-SUBRC NE 0.
 MESSAGE E002 WITH PARMS-LDS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 0030_OPEN_FILE *
 Open physical file for output *
FORM 0030_OPEN_FILE.
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
 encoding default. "thg191105
IF SY-SUBRC NE 0.
 MESSAGE E003 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 1000_GET_SOURCE_DATA *
 Read source data into internal table *
--> INP_DATA " Name of internal table passed as parameter *
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
 EXPORTING
 UNIX = PARMS-UNIX
 PC = PARMS-PC
 FILETYPE = PARMS-DS_TYP
 FILENAME = PARMS-PATH
 HDR_LINES = PARMS-HDR_LINES
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 INVALID_SOURCE = 8
 OTHERS = 9.
ENDFORM.
*eject
 FORM 2000_WRITE_OUTPUT *
 Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
 TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
 MESSAGE E004 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
 text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
DATA: FILENAME LIKE RLGRAP-FILENAME. "SRY28NOV05
DATA: W_FILENAME TYPE STRING. "SRY28NOV05
DATA: W_FTYP(10) TYPE C VALUE 'DAT'. "SRY28NOV05
MOVE PARMS-DS_NAME TO FILENAME. "SRY28NOV05
MOVE PARMS-DS_NAME TO W_FILENAME. "SRY28NOV05
*BEGIN OF BLOCK COMMENT BY SRY28NOV05
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE = ' '
 CODEPAGE = ' '
 FILENAME = FILENAME
 FILETYPE = 'DAT'
 MODE = ' '
 WK1_N_FORMAT = ' '
 WK1_N_SIZE = ' '
 WK1_T_FORMAT = ' '
 WK1_T_SIZE = ' '
 COL_SELECT = ' '
 COL_SELECTMASK = ' '
 importing
 filelength =
 TABLES
 DATA_TAB = INP_DATA
 FIELDNAMES =
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 OTHERS = 8.
*END OF BLOCK COMMENT BY SRY28NOV05
*BEGIN OF BLOCK ADDED BY SRY28NOV05
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = W_FILENAME
 FILETYPE = W_FTYP
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22.
IF SY-SUBRC NE 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*END OF BLOCK ADDED BY SRY28NOV05
ENDFORM. " 2100_WS_DOWNLOAD
*eject
 FORM 4000_PROGRESS_INDICATOR *
 Write progress text to status bar *
--> TEXT " Text passed as parameter *
FORM 4000_PROGRESS_INDICATOR USING TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 PERCENTAGE = 0
 TEXT = TEXT
 EXCEPTIONS
 OTHERS = 1.
ENDFORM.
*eject.
 FORM 9000_END_OF_JOB *
 Close files on UNIX *
FORM 9000_END_OF_JOB.
CLOSE DATASET PARMS-DS_NAME.
ENDFORM.
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
 EXPORTING
 UNIX = PARMS-UNIX
 PC = PARMS-PC
 FILETYPE = PARMS-DS_TYP
 FILENAME = PARMS-PATH
 HDR_LINES = PARMS-HDR_LINES
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 INVALID_SOURCE = 8
 OTHERS = 9.
ENDFORM.
*eject
 FORM 2000_WRITE_OUTPUT *
 Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
 TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
 MESSAGE E004 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
 text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.

Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV

Reg LSMW-Batch/Direct Input

Hi All,
I have small issue , I am using LSMW-Batch/Direct Input method i this method am using some fields and as per those fields i maintain flat file data.
in 7th step i specify file name , while saving that one am getting this Error message i.e.
File Name 'Converted Data': Max. 45 Characters. Remaining data saved. so please could you help me abt that .
Thanks & Regards,
SHAIK.

Hi Shaik,
In specify files step -> Files -> converted data the filename will be automatically proposed by system.
<Project name><Subproject name><Object name>.lsmw.conv
this file name should not exceed 45 characters. so please cut short the names of Project name / Subproject name/Object name or
double click on proposed file name and change it.
Regards,
Savitha

Lsmw in direct input

Hi,
I am doing a lsmw in direct input. Depending if i put the sales org. or not i get this error message:
Tax category/ is not defined for country DE
When i run the transaction manualy i dont get the error and I am using the same data.

The character "/" is the empty field character. It needs to go in the first character of an empty field. You may have put it in the wrong position. Check the file layout.
Rob

EAN/UPC check digit creation with Direct Input

Hi Experts,
I am working on Material data transfer using Direct Input. Requirement is to update the EAN/UPC for each Alt. UOM in Additional data view of Material master.
Further we need to set Indicator for automatic Determining the check digit for EAN .
I got Direct IP structure BMMH8 and BMMH6 for transfeering this data but didnt got Indicator field which I can set to automatic determining the check digit for EAN
Please let me know how to pass indicator for finding the check digit automatically while creating materials using Direct Input method.
Thanks in Advance...
-Harkamal

Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV

LSMW using Direct Input

Hi,
can anyone tell me in details how to create lsmw using direct input and using BAPI?
please let me know.

Hi,
Refer this link..
LSMW using Direct Input
http://learningabap.wordpress.com/2007/03/28/step-by-step-guide-for-using-lsmw-to-update-customer-master-records/
Using BAPI..
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
Regards
Sowmya

LSMW updating problem with direct input method

Hi!
Using version 4.0.0 of the LSM Workbench from 2001-07-01 on SAP R/3 4.7, I need to update the purchase order text and wanted to use the direct input method. I found a tutorial on SAPTechnical which I followed. All went well, the input data was converted and at last I got the message:
"Long Texts in Total : 2
Successfully Transferred Long Texts : 2
Non-Transferred Long Texts : 0"
My trials are recorded in table STXH with date and time and also in the material master change history. However, the result in the material master is that the purchase order text is NOT updated.
Can anyone tell me why this might be?

Hi Santosh!
First of all, thank you very much for posting an answer. But unfortunately it was of no help. I want to update the purchase order text on a material that already has the purchasing and purchase order text views. When I compare the PO text before and after my "Successfuly Transferred Long Texts" there is no change. I hope that this make it more clear but it is still a mystery to me.

Tax issue with Direct Input mode of RFBIBL00

Hi, I have a problem using RFBIBL00 (direct input mode) to create A/R invoices. There is no tax associated with the invoice, however, when I use direct input mode, instead of posting immediately, a batch input session is created. In the log, an information message: 'Specify a tax jurisdiction key'. The BDC session is processed with no error.
When using Call transaction mode for RFBIBL00, the document is posted immediately but the requirement is to use Direct input mode.
There is no converted data in the BBTAX structure since the doc. does not need to post to tax account. Do I need to populate the Tax amount, Tax code and jurisdiction code in this structure and BBSEG in order to by pass the information message?
Any advice is appreciated.
- Minami

Problem solved. Just need to untie the relationship between the ITEM import structure and the BBTAX so the Direct Input program will not require a tax jurisdiction code.

Special character "/" replacing with blank with Direct Input Method posting

Hi All,
I am posting FI historical data using Direct Input Method. Payment term contains special character "/"( I/E). SAP standard program replacing Special character "/" with blank (I E) so document posting is failing. Could you please advise.
Thanks
Chandra.

Can You please specify the Transaction code and SAP program name for direct input.

LSMW Guide Direct Input

Good day gurus,
Can someone give me some guides for LSMW Direct Input Method?
Thanks in advance

Transaction code :LSMW
give the inputs like PROJECT, SUB PROJECT AND OBJECT
and perform the 14 step process as shown in link
http://www.sap123.com/showthread.php?p=159

LSMW BOM Direct Input

I'm trying to use Direct Input method for uploading BOM and its my first time using Direct Input method. Are there any tutorials that I could use?

Hi,
Please check these links
http://www.sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
http://www.sap-img.com/sap-data-migration.htm
Regards,
R.brahmankar

Lsmw with Direct I/P for VB01

Hi,
Can any one tell me the name of the standard program for LSMW Direct I/P for the transaction VB01 - Current Product Listing and Exclusion ?
Please Reply !
Regards

Thanks for your reply !
can I go with recordings ?
Please Reply
Best Regards

Soem help on lsmw using direct input for mm01

hi,
this is to srinivas.i have done all the steps u have given.but at the step...convert data it is showing soem error msg.the error is
sytax error in prgm in include in line 68.for type "C",max length specification of 65535 is allowed.thanx in advance....

Hi Praveen,
the steps i was given you is working fine.
i just check the entire process
where did you got error.
I think in 6th step you just create fixes values,Translations & User-defined routines
ans delete all you have done at 6th step then the cursor goes to 7th step.
please let me know any error.
thanks & regards
Sreenivasulu P

LSMW- DIRECT INPUT - FOR ME11-------- ?

hello
hi I want update purchase info records By using lsmw with direct input/bach input method
pls send documentation for this
thanks

Hi,
Use SAP standard program RM06IBI0.
LSMW Object 0060
Method 0000
You can also use FM ME_POST_INFORECORD
Regards,
Satish

LSMW Direct Input Method RMDATIND tax classification material

Hi folks,
I am loading material master data throught LSMW using direct input method. In MM01 for a particular sales org we have tax classifcation for three different countries US, CA and GB. Could anyone tell me how do I post the tax classification Material data in the table control for these three different countries.
COUNTRY COUNTRY TAX CATG. TAX CATEG.       TAX CLASSIF
CA     Canada     CTX1     GST (Canada)     ...........
CA     Canada     CTX2     PST (Canada)     ...........
CA     Canada     CTX3     PST (Base+GST) Cdn...........
GB     United Kingdom     MWST     Output Tax...........
US     USA     UTXJ     Tax Jurisdict.Code     ...........
US     USA     UTX2     County Sales Tax     ...............
US     USA     UTX3     City Sales Tax     .............
Points will be rewarded for the answers.
Thanks,
Raj

Hi,
Not sure about the same requirement of countries & tax codes for all the materials for your upload.
If this is the case,
enable the
Extras->DisplayVariant
from the menu of the LSMW & check all the check boxes. Now you see the
__END_OF_RECORD__
for the structure
BMMH2
which has to be mapped with the input structure in the Maintain structure relations step.
double click on the
__END_OF_RECORD__
which will lead to ABAP editor & then put the following code:
* Canada
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX1'.
bmmh2-taxm1 = '1'.
transfer_record.
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX2'.
bmmh2-taxm1 = '1'.
transfer_record.
else if you have a different set of countries with different tax codes for the set of materials,
You need to have a separate file for this & map the fields to the structure fields of
BMMH2
Hope this helps.
Best Regards, Murugesh AS
Message was edited by:
        Murugesh Arcot

Lsmw with direct input

Similar Messages

Maybe you are looking for