LSMW with ECC6

Does anybody know if SAP updated LSMW objects to be usable in ECC6.
I ask this question because each time I try to use IDOC for G/L account posting with NEWGL or if I try direct input using standard object 0050 for customer master data there's missing fields and all releases are 4.6 and under.
Am I correct in assuming that SAP didn't update LSMW for ECC6 and/ or is this tool still supported by SAP or are they letting it die.
Thanks!

Hi
The problem is the structure ADDR1_DATA for address data is not supported by BI std, so this structure will not available for LSMW too.
If you need to update the address data u have to use a BAPI BAPI_ADDRESSORG_SAVEREPLICA just as it's indicate in the documentation of BI std for customer master data.
Now the problme is u should run two different steps: one for uploading the master data and one for address data.
This situation is not good for a project with LSMW: so u should use a recording as method in order to load all data by one only step.
Max

Similar Messages

  • How do I use LSMW with a bespoke dataload program?

    Hello data migration gurus, I need your help.
    I need to migrate data from a legacy system into a suite of bespoke functionality we've written within SAP CRM. We are planning to write a program to perform the load. However we would like such a program to be reusable, so it makes sense to keep the data load separate from the data formatting, which may vary between customers.
    The obvious answer is to use LSMW for the data formatting, calling our load program as the last step. However in LSMW you can only choose from a list of standard dataload programs. Does anyone know how to use LSMW with a bespoke program? It looks like transaction SXDA might be involved, but it isn't too clear. If anyone has done this kind of thing elsewhere, advice would be much appreciated!
    Obviously as an alternative we could just write a separate program to format the data - it would just be a lot better if we could use LSMW.

    No longer required.

  • LSMW with RSADRLSM02

    HI FOLKS,
    i want to do datamigration using lsmw with directinput method
    i want to upload the data for business address services/regionla structure the correspoind sap std program is RSADRLSM02.
    can anyone let me know how to proceed from step 2 to  5 i mean how to create the structure and assing the source fields and mappind logic
    flatfile is containing with cityno, cityname, streetno, streetname and i am getting struck at the point where at the end it is asking the logicalfile how to solve
    please someone can help me it is very urgent
    can anyone let me know how to create the logical file in file transaction and how to assign it to the standard application
    hello common guys
    lot of experts r here someone help to solve my proble plz it is very urgent
    thanks in advanse
    naveen
    Message was edited by: NAVEENKUMAR GUDURI
    Message was edited by: NAVEENKUMAR GUDURI

    Hi Naveenkumar,
    Please check this link which you can download LSMW documentation. It is very helpful and show you step by step on how to setup. Go to ABAP Tools -> ABAP utilities area and click on LSMW Described link.
    http://www.sapgenie.com/abap/
    Hope this will help.
    Regards,
    Ferry Lianto

  • LSMW in ECC6.0 - Read Data Error

    Dear SAP Gurus,
    I am trying to create an LSMW in ECC6.0 for uploading GL Masters data for Chart of Account.  I have got thru till "Read Data"
    On Executing "Read Data" I am getting this error
    "Loading from front end is not allowed for packed/hexadec. fields"
    This comes up even though I had not given "Hexadecimal Lth field" but nothing works and Code Page selected is ASCII (not IBM DOS)
    Please Help!
    Thanks

    Sorry it doesnt works.  I am not in a position to understand as to why this error is coming up at first place.
    While specifying the file type I am giving the parameters correctly, that is, I am not giving the Code Page as IBM DOS.
    Parameters:
    File Contents: Data for One Source Structure
    Delimiter: Tabulator
    File Structure:
         Field Names at Start of File
         AND
         File Type: Record End Marker (Text File)
    Code Page: ASCII

  • How can I work lsmw with table control using mm01 appl?

    Hi
    How can I work lsmw with table control using mm01 appl?
    Is it difefrent the way we handle table control in BDC?
    Thank You

    Hi
    How can I work lsmw with table control using mm01 appl?
    Is it difefrent the way we handle table control in BDC?
    Thank You

  • LSMW with bapi BAPI_REQUISITION_CREATE

    Hi
    I'm creating an LSMW for create purchase requisition with Bapi (BAPI_REQUISITION_CREATE)
    I'm trying to upload 2 items for a PR but the LSMW is creating 2 PR with each item.
    How can I tell to the LSMW that I have to item for the same PR?
    Remember this bapi doesn't has header.

    Hi,
    you need to define hierarchy in your in put file to merge required lines into one BAPI call. You can find some examples how to create order with multiple items (for example [this one|http://www.scribd.com/doc/6646673/Lsmw-With-Bapi]). So you can easily adapt it to your BAPI.
    Cheers

  • LSMW with IDOC Message type COND_A and Basic type COND_A01

    Hi Sap All.
    in my project we using the LSMW with IDOC Message type COND_A and Basic type COND_A01 and now the requirement is to know the list of the tables which will be updated when i do the LSMW Migration with this IDOC Basic type.
    i have tried to know the list of the tables updated by entering into the transaction we30 and looking at the segments E1KOMG,E1KONH, E1KONP,E1KONM,E1KONW  and i found that the following below are the list of tables which gets updated when i populate the data into IDOC Message type COND_A and Basic type COND_A01.
    KOMG,KONH,KONP,KONM,KONW.
    please correct me if iam wrong.
    regards.
    Varma

    Hi Varma,
    The tables mentioned by you definitely get updated, i guess you can add KONV to the list too, but to be a 100% sure, enable SQL trace and process an IDOC. Then you can look for Insert/Modify/Update statements to get a list of the tables that get updated.
    Regards,
    Chen

  • TREX 7.0 with ECC6 (A+J) on same physical box

    Hi,
    We are building a eREC6 landscape. With below details.
    1. EP7 system
    2. TREX 7.0 and ECC6 (A+J) on windows 64 bit physical server with MS SQL server 2005.
    This is for the eRecruitment 6.0 software solution landscape. This is just for demo and training purpose.
    I will do the RFC and HTTP connection between ECC6 and TREX 7.0.
    I will connect ECC6 system in portal for Single sign on.
    Will you please tel me steps for TREX connectivity with ECC6.
    Will you please tell me is there any other specific configuration we need to do for eREC 6.0 configuration in this landscape.
    I am having setup guide for ECC6 and TREX 7.0 and even some material for eREC 6.0 but in this they have not given specific detailed document.
    If possible please let me know any other steps I need to take for this.
    Thanks and regards,
    Ripal

    Hi Ripal,
    as soon, as you have a search-specific issue, I might be able to help.
    As long as you ask about eRec in general, please post to the appropriate ERP or HCM forum.
    Regards,
    Karsten

  • LSMW with Idocs directly created

    Hello,
    I'm using the LSMW with Idocs for the migration of business partners in CRM.
    During the step "convert data" I have the choise to create the Idocs directly (without creating the file first).
    Some days ago everything was well working. But without knowing what I've changed in LSMW, this is no longer possible.
    I get the same screen as when I want to create a file ".conv", but the name of "converted file" is not named. Instead there is a message "no directly creation of Idoc"
    What do I do wrong? What do I have to change?
    Thanks in advance!
    Nicole

    you have to always convert the data after reading the data.
    please check in the specify files section you have given the file name for the converted data in the application server.
    you will not get the option to create idocs directly in the convert data step.
    please let me know if you any more details.
    regards
    vivek
    reward points for all the useful answers

  • PO release strategy LSMW with SM30_VV_T16FS_2

    Dear Friends ,
    Problem in Release strategy upload for PO release strategy.
    We are making LSMW with SM30 for - VV_T16FS_2
    Problem is that when we do recording actulat release codes come in , release prerequisites also come but as you know in that case we not prese ENTER , we need to click on Release prerequisite then only Release status comes.
    There is some problem with OKCODE. Means as per my understanding system not takes full release startegy smoothly.
    Regards,
    MAhesh

    Hi ,
    It is with help of ABAPEr , i dont know exactly but while designed LSMW some lines was ger dublicated and we removed it. thats it.

  • I want to upload material master (MM01) using LSMW with BAPI method

    I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
    Which business object and Method I should use so that i can do both.
    Thanks
    kumar n

    Hi,
    The business object is BUS1001.
    Thanks,
    Murali

  • Standard Screen Element Changes with ECC6.0 in SAP Standard Transactions

    Hi,
    We have upgraded our system from 4.7 to ECC6.0. I need documentation on all GUI changes with ECC6.0 for all SAP transactions/modules.
    I mean, for example, if Sales Order creation screen (transaction code VA01) in 4.7 have say... 12 tabs, then if it has 13 tabs (standard features I am talking) in ECC6.0. I want these kind of additional chnages done to screens like.. adding new menus in menu bar or buttons on tool bar etc.
    As we need to educate our users for all the screen related standard chages by SAP because of upgrade.
    Thx in advance,
    Nagesh

    Ofcouse Nishanth, u need to code in PBO and PAI event.
    PAI   -> To read the User input and for doing validations or some thing as per ur requirement
    Hope this helps,
    Shiva kankanala

  • Please advice -PS /PP Module comes by default with ECC6 or addon  ?

    Hi Gurus,
    Could you please let me know whether PS /PP modules comes along with ECC6 or seperate addon installation to ECC6.Like EHP
    Where can i find the technical documentation.
    Thanks in advance....
    Moderator message: not directly related to ABAP development, please search for available information/documentation.
    Edited by: Thomas Zloch on Oct 7, 2011 10:58 AM

    Hi,
    By defaults all modules will be there.You need to configure that in system according to your business requirement .There is no need of any special installation for ps.
    Regards,
    Madhu.

  • Compare 4.6C IMG with ECC6.0

    Hi,
    I would like  to compare the 4.6C IMG steps with ECC6.0 to find out any additions/deletions, is there any reports to compare?
    I also checked within IMG <IMG Information>, but wanted to check if there are any other options?
    Regards
    GK

    Thanks.
    That didn't help much and i am trying to run through SCU0 which is also comparing only entries. How to check the IMG additions/deletions from 4.6c to ECC 6.0?
    Still, appreciate the response.
    Regards
    GK

  • Using LSMW with IDocs to transfer merchandise categories?

    Hi, Gurus,
    i tried to upload merchandise categories by LSMW with IDocs.
    Message Type: CLSMAS
    Basis Type: CLSMAS03
    The IDocs can be created and processed without problem. However, I cannot see the new Hierarchy Level in Tcode CLWO.
    Anyone has done it? Any tipps would be highly appreciated!
    Regards
    Kefei

    hi, Hakim,
    unbelievable! I solved the problem.
    U cannot imagine, where is the trick. UPPERCASE!!
    The class number in the soure structure is written in lower case. They can be writen in SAP and be shown by F4. But they cannot be displayed. SAP says always they do not exsit.
    Now, I understand, SAP is so sensible to character.
    Thank you for your support!
    nice weekend!

Maybe you are looking for

  • Is there a way to change the categories in the Personal Finance Template

    I am trying to use the Personal Finance Template rather than developing one for myself.  Is there a way to change the Cateorgies that are listed in the template?  Those don't work for me!

  • My ipod is not charging or connecting to the computer. .

    my ipod is not charging or conecting to the computer. i reset the ipod and network settings and it still wont charge no matter what. it wont even connect to the computer. HELP

  • Data Mining in 9i

    Hi All, We have Oracle 9i Rel2, with OLAP and data miming option. The documents available in the net doesnt cover basic information on the installation/configuration/usage stuff. Can any one point me to a location (not oracle documents), where there

  • Checkboxes display as "?" ???

    I've seen a number of postings with people having issues with checkboxes - some displaying the checkboxes as diamonds, and a couple with the checkboxes displaying as question marks. Unfortunately, I didn't see a solution for the checkboxes displaying

  • Java Window Painting Problems

    I am just getting into Java so forgive me if this a newbie question because well, I'm a newbie. I downloaded JBuilder 6.0 and got to work learning the language. The problem is that anything I use written in the Java lanuage when I move the Window it